Merge tag 'samsung-drivers-4.8-2' of...

Merge tag 'samsung-drivers-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers

Samsung drivers/soc update for v4.8, part 2:
1. Endian-friendly fixes.
2. Make SROMC driver explicitly non-module.

* tag 'samsung-drivers-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  cpufreq: s5pv210: use relaxed IO accesors
  memory: samsung: exynos-srom: make it explicitly non-modular
  memory: samsung: endian fixes for IO
Signed-off-by: Olof Johansson <olof@lixom.net>

drivers/cpufreq/s5pv210-cpufreq.c

@@ -220,7 +220,7 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
 
 	tmp1 /= tmp;
 
-	__raw_writel(tmp1, reg);
+	writel_relaxed(tmp1, reg);
 }
 
 static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
@@ -301,29 +301,29 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 		 * 1. Temporary Change divider for MFC and G3D
 		 * SCLKA2M(200/1=200)->(200/4=50)Mhz
 		 */
-		reg = __raw_readl(S5P_CLK_DIV2);
+		reg = readl_relaxed(S5P_CLK_DIV2);
 		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
 		reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
 			(3 << S5P_CLKDIV2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_DIV2);
+		writel_relaxed(reg, S5P_CLK_DIV2);
 
 		/* For MFC, G3D dividing */
 		do {
-			reg = __raw_readl(S5P_CLKDIV_STAT0);
+			reg = readl_relaxed(S5P_CLKDIV_STAT0);
 		} while (reg & ((1 << 16) | (1 << 17)));
 
 		/*
 		 * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
 		 * (200/4=50)->(667/4=166)Mhz
 		 */
-		reg = __raw_readl(S5P_CLK_SRC2);
+		reg = readl_relaxed(S5P_CLK_SRC2);
 		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
 		reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
 			(1 << S5P_CLKSRC2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC2);
+		writel_relaxed(reg, S5P_CLK_SRC2);
 
 		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT1);
+			reg = readl_relaxed(S5P_CLKMUX_STAT1);
 		} while (reg & ((1 << 7) | (1 << 3)));
 
 		/*
@@ -335,19 +335,19 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 			s5pv210_set_refresh(DMC1, 133000);
 
 		/* 4. SCLKAPLL -> SCLKMPLL */
-		reg = __raw_readl(S5P_CLK_SRC0);
+		reg = readl_relaxed(S5P_CLK_SRC0);
 		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
 		reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC0);
+		writel_relaxed(reg, S5P_CLK_SRC0);
 
 		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT0);
+			reg = readl_relaxed(S5P_CLKMUX_STAT0);
 		} while (reg & (0x1 << 18));
 
 	}
 
 	/* Change divider */
-	reg = __raw_readl(S5P_CLK_DIV0);
+	reg = readl_relaxed(S5P_CLK_DIV0);
 
 	reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
 		S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
@@ -363,25 +363,25 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 		(clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
 		(clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
 
-	__raw_writel(reg, S5P_CLK_DIV0);
+	writel_relaxed(reg, S5P_CLK_DIV0);
 
 	do {
-		reg = __raw_readl(S5P_CLKDIV_STAT0);
+		reg = readl_relaxed(S5P_CLKDIV_STAT0);
 	} while (reg & 0xff);
 
 	/* ARM MCS value changed */
-	reg = __raw_readl(S5P_ARM_MCS_CON);
+	reg = readl_relaxed(S5P_ARM_MCS_CON);
 	reg &= ~0x3;
 	if (index >= L3)
 		reg |= 0x3;
 	else
 		reg |= 0x1;
 
-	__raw_writel(reg, S5P_ARM_MCS_CON);
+	writel_relaxed(reg, S5P_ARM_MCS_CON);
 
 	if (pll_changing) {
 		/* 5. Set Lock time = 30us*24Mhz = 0x2cf */
-		__raw_writel(0x2cf, S5P_APLL_LOCK);
+		writel_relaxed(0x2cf, S5P_APLL_LOCK);
 
 		/*
 		 * 6. Turn on APLL
@@ -389,12 +389,12 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 		 * 6-2. Wait untile the PLL is locked
 		 */
 		if (index == L0)
-			__raw_writel(APLL_VAL_1000, S5P_APLL_CON);
+			writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
 		else
-			__raw_writel(APLL_VAL_800, S5P_APLL_CON);
+			writel_relaxed(APLL_VAL_800, S5P_APLL_CON);
 
 		do {
-			reg = __raw_readl(S5P_APLL_CON);
+			reg = readl_relaxed(S5P_APLL_CON);
 		} while (!(reg & (0x1 << 29)));
 
 		/*
@@ -402,39 +402,39 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
 		 * (667/4=166)->(200/4=50)Mhz
 		 */
-		reg = __raw_readl(S5P_CLK_SRC2);
+		reg = readl_relaxed(S5P_CLK_SRC2);
 		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
 		reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
 			(0 << S5P_CLKSRC2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC2);
+		writel_relaxed(reg, S5P_CLK_SRC2);
 
 		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT1);
+			reg = readl_relaxed(S5P_CLKMUX_STAT1);
 		} while (reg & ((1 << 7) | (1 << 3)));
 
 		/*
 		 * 8. Change divider for MFC and G3D
 		 * (200/4=50)->(200/1=200)Mhz
 		 */
-		reg = __raw_readl(S5P_CLK_DIV2);
+		reg = readl_relaxed(S5P_CLK_DIV2);
 		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
 		reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
 			(clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
-		__raw_writel(reg, S5P_CLK_DIV2);
+		writel_relaxed(reg, S5P_CLK_DIV2);
 
 		/* For MFC, G3D dividing */
 		do {
-			reg = __raw_readl(S5P_CLKDIV_STAT0);
+			reg = readl_relaxed(S5P_CLKDIV_STAT0);
 		} while (reg & ((1 << 16) | (1 << 17)));
 
 		/* 9. Change MPLL to APLL in MSYS_MUX */
-		reg = __raw_readl(S5P_CLK_SRC0);
+		reg = readl_relaxed(S5P_CLK_SRC0);
 		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
 		reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
-		__raw_writel(reg, S5P_CLK_SRC0);
+		writel_relaxed(reg, S5P_CLK_SRC0);
 
 		do {
-			reg = __raw_readl(S5P_CLKMUX_STAT0);
+			reg = readl_relaxed(S5P_CLKMUX_STAT0);
 		} while (reg & (0x1 << 18));
 
 		/*
@@ -451,13 +451,13 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 	 * and memory refresh parameter should be changed
 	 */
 	if (bus_speed_changing) {
-		reg = __raw_readl(S5P_CLK_DIV6);
+		reg = readl_relaxed(S5P_CLK_DIV6);
 		reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
 		reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
-		__raw_writel(reg, S5P_CLK_DIV6);
+		writel_relaxed(reg, S5P_CLK_DIV6);
 
 		do {
-			reg = __raw_readl(S5P_CLKDIV_STAT1);
+			reg = readl_relaxed(S5P_CLKDIV_STAT1);
 		} while (reg & (1 << 15));
 
 		/* Reconfigure DRAM refresh counter value */
@@ -497,7 +497,7 @@ static int check_mem_type(void __iomem *dmc_reg)
 {
 	unsigned long val;
 
-	val = __raw_readl(dmc_reg + 0x4);
+	val = readl_relaxed(dmc_reg + 0x4);
 	val = (val & (0xf << 8));
 
 	return val >> 8;
@@ -542,10 +542,10 @@ static int s5pv210_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	/* Find current refresh counter and frequency each DMC */
-	s5pv210_dram_conf[0].refresh = (__raw_readl(dmc_base[0] + 0x30) * 1000);
+	s5pv210_dram_conf[0].refresh = (readl_relaxed(dmc_base[0] + 0x30) * 1000);
 	s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
 
-	s5pv210_dram_conf[1].refresh = (__raw_readl(dmc_base[1] + 0x30) * 1000);
+	s5pv210_dram_conf[1].refresh = (readl_relaxed(dmc_base[1] + 0x30) * 1000);
 	s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
 
 	policy->suspend_freq = SLEEP_FREQ;

drivers/memory/samsung/exynos-srom.c

@@ -11,7 +11,7 @@
  */
 
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
@@ -91,17 +91,17 @@ static int exynos_srom_configure_bank(struct exynos_srom *srom,
 	if (width == 2)
 		cs |= 1 << EXYNOS_SROM_BW__DATAWIDTH__SHIFT;
 
-	bw = __raw_readl(srom->reg_base + EXYNOS_SROM_BW);
+	bw = readl_relaxed(srom->reg_base + EXYNOS_SROM_BW);
 	bw = (bw & ~(EXYNOS_SROM_BW__CS_MASK << bank)) | (cs << bank);
-	__raw_writel(bw, srom->reg_base + EXYNOS_SROM_BW);
+	writel_relaxed(bw, srom->reg_base + EXYNOS_SROM_BW);
 
-	__raw_writel(pmc | (timing[0] << EXYNOS_SROM_BCX__TACP__SHIFT) |
-		    (timing[1] << EXYNOS_SROM_BCX__TCAH__SHIFT) |
-		    (timing[2] << EXYNOS_SROM_BCX__TCOH__SHIFT) |
-		    (timing[3] << EXYNOS_SROM_BCX__TACC__SHIFT) |
-		    (timing[4] << EXYNOS_SROM_BCX__TCOS__SHIFT) |
-		    (timing[5] << EXYNOS_SROM_BCX__TACS__SHIFT),
-		    srom->reg_base + EXYNOS_SROM_BC0 + bank);
+	writel_relaxed(pmc | (timing[0] << EXYNOS_SROM_BCX__TACP__SHIFT) |
+		       (timing[1] << EXYNOS_SROM_BCX__TCAH__SHIFT) |
+		       (timing[2] << EXYNOS_SROM_BCX__TCOH__SHIFT) |
+		       (timing[3] << EXYNOS_SROM_BCX__TACC__SHIFT) |
+		       (timing[4] << EXYNOS_SROM_BCX__TCOS__SHIFT) |
+		       (timing[5] << EXYNOS_SROM_BCX__TACS__SHIFT),
+		       srom->reg_base + EXYNOS_SROM_BC0 + bank);
 
 	return 0;
 }
@@ -159,16 +159,6 @@ static int exynos_srom_probe(struct platform_device *pdev)
 	return of_platform_populate(np, NULL, NULL, dev);
 }
 
-static int exynos_srom_remove(struct platform_device *pdev)
-{
-	struct exynos_srom *srom = platform_get_drvdata(pdev);
-
-	kfree(srom->reg_offset);
-	iounmap(srom->reg_base);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static void exynos_srom_save(void __iomem *base,
 				    struct exynos_srom_reg_dump *rd,
@@ -211,21 +201,16 @@ static const struct of_device_id of_exynos_srom_ids[] = {
 	},
 	{},
 };
-MODULE_DEVICE_TABLE(of, of_exynos_srom_ids);
 
 static SIMPLE_DEV_PM_OPS(exynos_srom_pm_ops, exynos_srom_suspend, exynos_srom_resume);
 
 static struct platform_driver exynos_srom_driver = {
 	.probe = exynos_srom_probe,
-	.remove = exynos_srom_remove,
 	.driver = {
 		.name = "exynos-srom",
 		.of_match_table = of_exynos_srom_ids,
 		.pm = &exynos_srom_pm_ops,
+		.suppress_bind_attrs = true,
 	},
 };
-module_platform_driver(exynos_srom_driver);
-
-MODULE_AUTHOR("Pankaj Dubey <pankaj.dubey@samsung.com>");
-MODULE_DESCRIPTION("Exynos SROM Controller Driver");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(exynos_srom_driver);