Merge branch 'bnxt_en-next'

Michael Chan says:

====================
bnxt_en: Updates for net-next.

Update to latest firmware interface, add EEE feature, unsupported SFP+
module warning, and ethtool -s improvements.

v2: Removed the GEEPROM patch and added more comments to the get_eee patch.
====================

drivers/net/ethernet/broadcom/bnxt/bnxt.h

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -11,7 +11,7 @@
 #define BNXT_H
 
 #define DRV_MODULE_NAME		"bnxt_en"
-#define DRV_MODULE_VERSION	"1.0.0"
+#define DRV_MODULE_VERSION	"1.2.0"
 
 #define DRV_VER_MAJ	1
 #define DRV_VER_MIN	0
@@ -788,7 +788,7 @@ struct bnxt_link_info {
 #define BNXT_LINK_AUTO_ALLSPDS	PORT_PHY_QCFG_RESP_AUTO_MODE_ALL_SPEEDS
 #define BNXT_LINK_AUTO_ONESPD	PORT_PHY_QCFG_RESP_AUTO_MODE_ONE_SPEED
 #define BNXT_LINK_AUTO_ONEORBELOW PORT_PHY_QCFG_RESP_AUTO_MODE_ONE_OR_BELOW
-#define BNXT_LINK_AUTO_MSK	PORT_PHY_QCFG_RESP_AUTO_MODE_MASK
+#define BNXT_LINK_AUTO_MSK	PORT_PHY_QCFG_RESP_AUTO_MODE_SPEED_MASK
 #define PHY_VER_LEN		3
 	u8			phy_ver[PHY_VER_LEN];
 	u16			link_speed;
@@ -813,7 +813,6 @@ struct bnxt_link_info {
 #define BNXT_LINK_SPEED_MSK_40GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_40GB
 #define BNXT_LINK_SPEED_MSK_50GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_50GB
 	u16			lp_auto_link_speeds;
-	u16			auto_link_speed;
 	u16			force_link_speed;
 	u32			preemphasis;
 
@@ -826,6 +825,8 @@ struct bnxt_link_info {
 	u16			req_link_speed;
 	u32			advertising;
 	bool			force_link_chng;
+
+	u8			last_port_module_event;
 	/* a copy of phy_qcfg output used to report link
 	 * info to VF
 	 */
@@ -875,6 +876,7 @@ struct bnxt {
 	#define BNXT_FLAG_RFS		0x100
 	#define BNXT_FLAG_SHARED_RINGS	0x200
 	#define BNXT_FLAG_PORT_STATS	0x400
+	#define BNXT_FLAG_EEE_CAP	0x1000
 
 	#define BNXT_FLAG_ALL_CONFIG_FEATS (BNXT_FLAG_TPA |		\
 					    BNXT_FLAG_RFS |		\
@@ -940,6 +942,7 @@ struct bnxt {
 
 	u32			msg_enable;
 
+	u32			hwrm_spec_code;
 	u16			hwrm_cmd_seq;
 	u32			hwrm_intr_seq_id;
 	void			*hwrm_cmd_resp_addr;
@@ -991,6 +994,7 @@ struct bnxt {
 #define BNXT_RST_RING_SP_EVENT		7
 #define BNXT_HWRM_PF_UNLOAD_SP_EVENT	8
 #define BNXT_PERIODIC_STATS_SP_EVENT	9
+#define BNXT_HWRM_PORT_MODULE_SP_EVENT	10
 
 	struct bnxt_pf_info	pf;
 #ifdef CONFIG_BNXT_SRIOV
@@ -1011,6 +1015,9 @@ struct bnxt {
 	int			ntp_fltr_count;
 
 	struct bnxt_link_info	link_info;
+	struct ethtool_eee	eee;
+	u32			lpi_tmr_lo;
+	u32			lpi_tmr_hi;
 };
 
 #ifdef CONFIG_NET_RX_BUSY_POLL
@@ -1108,7 +1115,7 @@ int hwrm_send_message_silent(struct bnxt *, void *, u32, int);
 int bnxt_hwrm_set_coal(struct bnxt *);
 int bnxt_hwrm_func_qcaps(struct bnxt *);
 int bnxt_hwrm_set_pause(struct bnxt *);
-int bnxt_hwrm_set_link_setting(struct bnxt *, bool);
+int bnxt_hwrm_set_link_setting(struct bnxt *, bool, bool);
 int bnxt_open_nic(struct bnxt *, bool, bool);
 int bnxt_close_nic(struct bnxt *, bool, bool);
 int bnxt_get_max_rings(struct bnxt *, int *, int *, bool);

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -597,7 +597,7 @@ static void bnxt_get_drvinfo(struct net_device *dev,
 	kfree(pkglog);
 }
 
-static u32 _bnxt_fw_to_ethtool_adv_spds(u16 fw_speeds, u8 fw_pause)
+u32 _bnxt_fw_to_ethtool_adv_spds(u16 fw_speeds, u8 fw_pause)
 {
 	u32 speed_mask = 0;
 
@@ -698,10 +698,23 @@ static int bnxt_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		if (link_info->phy_link_status == BNXT_LINK_LINK)
 			cmd->lp_advertising =
 				bnxt_fw_to_ethtool_lp_adv(link_info);
+		ethtool_speed = bnxt_fw_to_ethtool_speed(link_info->link_speed);
+		if (!netif_carrier_ok(dev))
+			cmd->duplex = DUPLEX_UNKNOWN;
+		else if (link_info->duplex & BNXT_LINK_DUPLEX_FULL)
+			cmd->duplex = DUPLEX_FULL;
+		else
+			cmd->duplex = DUPLEX_HALF;
 	} else {
 		cmd->autoneg = AUTONEG_DISABLE;
 		cmd->advertising = 0;
+		ethtool_speed =
+			bnxt_fw_to_ethtool_speed(link_info->req_link_speed);
+		cmd->duplex = DUPLEX_HALF;
+		if (link_info->req_duplex == BNXT_LINK_DUPLEX_FULL)
+			cmd->duplex = DUPLEX_FULL;
 	}
+	ethtool_cmd_speed_set(cmd, ethtool_speed);
 
 	cmd->port = PORT_NONE;
 	if (link_info->media_type == PORT_PHY_QCFG_RESP_MEDIA_TYPE_TP) {
@@ -719,16 +732,8 @@ static int bnxt_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			cmd->port = PORT_FIBRE;
 	}
 
-	if (link_info->phy_link_status == BNXT_LINK_LINK) {
-		if (link_info->duplex & BNXT_LINK_DUPLEX_FULL)
-			cmd->duplex = DUPLEX_FULL;
-	} else {
-		cmd->duplex = DUPLEX_UNKNOWN;
-	}
-	ethtool_speed = bnxt_fw_to_ethtool_speed(link_info->link_speed);
-	ethtool_cmd_speed_set(cmd, ethtool_speed);
 	if (link_info->transceiver ==
-		PORT_PHY_QCFG_RESP_TRANSCEIVER_TYPE_XCVR_INTERNAL)
+	    PORT_PHY_QCFG_RESP_XCVR_PKG_TYPE_XCVR_INTERNAL)
 		cmd->transceiver = XCVR_INTERNAL;
 	else
 		cmd->transceiver = XCVR_EXTERNAL;
@@ -739,31 +744,52 @@ static int bnxt_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 static u32 bnxt_get_fw_speed(struct net_device *dev, u16 ethtool_speed)
 {
+	struct bnxt *bp = netdev_priv(dev);
+	struct bnxt_link_info *link_info = &bp->link_info;
+	u16 support_spds = link_info->support_speeds;
+	u32 fw_speed = 0;
+
 	switch (ethtool_speed) {
 	case SPEED_100:
-		return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_100MB;
+		if (support_spds & BNXT_LINK_SPEED_MSK_100MB)
+			fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_100MB;
+		break;
 	case SPEED_1000:
-		return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_1GB;
+		if (support_spds & BNXT_LINK_SPEED_MSK_1GB)
+			fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_1GB;
+		break;
 	case SPEED_2500:
-		return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_2_5GB;
+		if (support_spds & BNXT_LINK_SPEED_MSK_2_5GB)
+			fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_2_5GB;
+		break;
 	case SPEED_10000:
-		return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_10GB;
+		if (support_spds & BNXT_LINK_SPEED_MSK_10GB)
+			fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_10GB;
+		break;
 	case SPEED_20000:
-		return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_20GB;
+		if (support_spds & BNXT_LINK_SPEED_MSK_20GB)
+			fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_20GB;
+		break;
 	case SPEED_25000:
-		return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_25GB;
+		if (support_spds & BNXT_LINK_SPEED_MSK_25GB)
+			fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_25GB;
+		break;
 	case SPEED_40000:
-		return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_40GB;
+		if (support_spds & BNXT_LINK_SPEED_MSK_40GB)
+			fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_40GB;
+		break;
 	case SPEED_50000:
-		return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_50GB;
+		if (support_spds & BNXT_LINK_SPEED_MSK_50GB)
+			fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_50GB;
+		break;
 	default:
 		netdev_err(dev, "unsupported speed!\n");
 		break;
 	}
-	return 0;
+	return fw_speed;
 }
 
-static u16 bnxt_get_fw_auto_link_speeds(u32 advertising)
+u16 bnxt_get_fw_auto_link_speeds(u32 advertising)
 {
 	u16 fw_speed_mask = 0;
 
@@ -823,6 +849,8 @@ static int bnxt_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		 */
 		set_pause = true;
 	} else {
+		u16 fw_speed;
+
 		/* TODO: currently don't support half duplex */
 		if (cmd->duplex == DUPLEX_HALF) {
 			netdev_err(dev, "HALF DUPLEX is not supported!\n");
@@ -833,14 +861,19 @@ static int bnxt_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		if (cmd->duplex == DUPLEX_UNKNOWN)
 			cmd->duplex = DUPLEX_FULL;
 		speed = ethtool_cmd_speed(cmd);
-		link_info->req_link_speed = bnxt_get_fw_speed(dev, speed);
+		fw_speed = bnxt_get_fw_speed(dev, speed);
+		if (!fw_speed) {
+			rc = -EINVAL;
+			goto set_setting_exit;
+		}
+		link_info->req_link_speed = fw_speed;
 		link_info->req_duplex = BNXT_LINK_DUPLEX_FULL;
 		link_info->autoneg = 0;
 		link_info->advertising = 0;
 	}
 
 	if (netif_running(dev))
-		rc = bnxt_hwrm_set_link_setting(bp, set_pause);
+		rc = bnxt_hwrm_set_link_setting(bp, set_pause, false);
 
 set_setting_exit:
 	return rc;
@@ -874,7 +907,9 @@ static int bnxt_set_pauseparam(struct net_device *dev,
 			return -EINVAL;
 
 		link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
-		link_info->req_flow_ctrl |= BNXT_LINK_PAUSE_BOTH;
+		if (bp->hwrm_spec_code >= 0x10201)
+			link_info->req_flow_ctrl =
+				PORT_PHY_CFG_REQ_AUTO_PAUSE_AUTONEG_PAUSE;
 	} else {
 		/* when transition from auto pause to force pause,
 		 * force a link change
@@ -882,17 +917,13 @@ static int bnxt_set_pauseparam(struct net_device *dev,
 		if (link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL)
 			link_info->force_link_chng = true;
 		link_info->autoneg &= ~BNXT_AUTONEG_FLOW_CTRL;
-		link_info->req_flow_ctrl &= ~BNXT_LINK_PAUSE_BOTH;
+		link_info->req_flow_ctrl = 0;
 	}
 	if (epause->rx_pause)
 		link_info->req_flow_ctrl |= BNXT_LINK_PAUSE_RX;
-	else
-		link_info->req_flow_ctrl &= ~BNXT_LINK_PAUSE_RX;
 
 	if (epause->tx_pause)
 		link_info->req_flow_ctrl |= BNXT_LINK_PAUSE_TX;
-	else
-		link_info->req_flow_ctrl &= ~BNXT_LINK_PAUSE_TX;
 
 	if (netif_running(dev))
 		rc = bnxt_hwrm_set_pause(bp);
@@ -1381,6 +1412,80 @@ static int bnxt_set_eeprom(struct net_device *dev,
 				eeprom->len);
 }
 
+static int bnxt_set_eee(struct net_device *dev, struct ethtool_eee *edata)
+{
+	struct bnxt *bp = netdev_priv(dev);
+	struct ethtool_eee *eee = &bp->eee;
+	struct bnxt_link_info *link_info = &bp->link_info;
+	u32 advertising =
+		 _bnxt_fw_to_ethtool_adv_spds(link_info->advertising, 0);
+	int rc = 0;
+
+	if (BNXT_VF(bp))
+		return 0;
+
+	if (!(bp->flags & BNXT_FLAG_EEE_CAP))
+		return -EOPNOTSUPP;
+
+	if (!edata->eee_enabled)
+		goto eee_ok;
+
+	if (!(link_info->autoneg & BNXT_AUTONEG_SPEED)) {
+		netdev_warn(dev, "EEE requires autoneg\n");
+		return -EINVAL;
+	}
+	if (edata->tx_lpi_enabled) {
+		if (bp->lpi_tmr_hi && (edata->tx_lpi_timer > bp->lpi_tmr_hi ||
+				       edata->tx_lpi_timer < bp->lpi_tmr_lo)) {
+			netdev_warn(dev, "Valid LPI timer range is %d and %d microsecs\n",
+				    bp->lpi_tmr_lo, bp->lpi_tmr_hi);
+			return -EINVAL;
+		} else if (!bp->lpi_tmr_hi) {
+			edata->tx_lpi_timer = eee->tx_lpi_timer;
+		}
+	}
+	if (!edata->advertised) {
+		edata->advertised = advertising & eee->supported;
+	} else if (edata->advertised & ~advertising) {
+		netdev_warn(dev, "EEE advertised %x must be a subset of autoneg advertised speeds %x\n",
+			    edata->advertised, advertising);
+		return -EINVAL;
+	}
+
+	eee->advertised = edata->advertised;
+	eee->tx_lpi_enabled = edata->tx_lpi_enabled;
+	eee->tx_lpi_timer = edata->tx_lpi_timer;
+eee_ok:
+	eee->eee_enabled = edata->eee_enabled;
+
+	if (netif_running(dev))
+		rc = bnxt_hwrm_set_link_setting(bp, false, true);
+
+	return rc;
+}
+
+static int bnxt_get_eee(struct net_device *dev, struct ethtool_eee *edata)
+{
+	struct bnxt *bp = netdev_priv(dev);
+
+	if (!(bp->flags & BNXT_FLAG_EEE_CAP))
+		return -EOPNOTSUPP;
+
+	*edata = bp->eee;
+	if (!bp->eee.eee_enabled) {
+		/* Preserve tx_lpi_timer so that the last value will be used
+		 * by default when it is re-enabled.
+		 */
+		edata->advertised = 0;
+		edata->tx_lpi_enabled = 0;
+	}
+
+	if (!bp->eee.eee_active)
+		edata->lp_advertised = 0;
+
+	return 0;
+}
+
 const struct ethtool_ops bnxt_ethtool_ops = {
 	.get_settings		= bnxt_get_settings,
 	.set_settings		= bnxt_set_settings,
@@ -1409,4 +1514,6 @@ const struct ethtool_ops bnxt_ethtool_ops = {
 	.get_eeprom             = bnxt_get_eeprom,
 	.set_eeprom		= bnxt_set_eeprom,
 	.get_link		= bnxt_get_link,
+	.get_eee		= bnxt_get_eee,
+	.set_eee		= bnxt_set_eee,
 };

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -12,6 +12,8 @@
 
 extern const struct ethtool_ops bnxt_ethtool_ops;
 
+u32 _bnxt_fw_to_ethtool_adv_spds(u16, u8);
 u32 bnxt_fw_to_ethtool_speed(u16);
+u16 bnxt_get_fw_auto_link_speeds(u32);
 
 #endif

drivers/net/ethernet/broadcom/bnxt/bnxt_fw_hdr.h

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnxt/bnxt_nvm_defs.h

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -771,12 +771,8 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf)
 			    PORT_PHY_QCFG_RESP_LINK_NO_LINK) {
 				phy_qcfg_resp.link =
 					PORT_PHY_QCFG_RESP_LINK_LINK;
-				if (phy_qcfg_resp.auto_link_speed)
-					phy_qcfg_resp.link_speed =
-						phy_qcfg_resp.auto_link_speed;
-				else
-					phy_qcfg_resp.link_speed =
-						phy_qcfg_resp.force_link_speed;
+				phy_qcfg_resp.link_speed = cpu_to_le16(
+					PORT_PHY_QCFG_RESP_LINK_SPEED_10GB);
 				phy_qcfg_resp.duplex =
 					PORT_PHY_QCFG_RESP_DUPLEX_FULL;
 				phy_qcfg_resp.pause =
@@ -859,8 +855,8 @@ void bnxt_update_vf_mac(struct bnxt *bp)
 	 *    default but the stored zero MAC will allow the VF user to change
 	 *    the random MAC address using ndo_set_mac_address() if he wants.
 	 */
-	if (!ether_addr_equal(resp->perm_mac_address, bp->vf.mac_addr))
-		memcpy(bp->vf.mac_addr, resp->perm_mac_address, ETH_ALEN);
+	if (!ether_addr_equal(resp->mac_address, bp->vf.mac_addr))
+		memcpy(bp->vf.mac_addr, resp->mac_address, ETH_ALEN);
 
 	/* overwrite netdev dev_addr with admin VF MAC */
 	if (is_valid_ether_addr(bp->vf.mac_addr))

drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h

 /* Broadcom NetXtreme-C/E network driver.
  *
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by