ARM: S3C64XX: make regs-sys.h local

The header file can be local in mach-s3c64xx/.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s3c64xx/clock.c

@@ -23,7 +23,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/regs-sys.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
@@ -33,6 +32,8 @@
 #include <plat/clock-clksrc.h>
 #include <plat/pll.h>
 
+#include "regs-sys.h"
+
 /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
  * ext_xtal_mux for want of an actual name from the manual.
 */

arch/arm/mach-s3c64xx/cpuidle.c

@@ -20,9 +20,10 @@
 
 #include <mach/map.h>
 
-#include <mach/regs-sys.h>
 #include <mach/regs-syscon-power.h>
 
+#include "regs-sys.h"
+
 static int s3c64xx_enter_idle(struct cpuidle_device *dev,
 			      struct cpuidle_driver *drv,
 			      int index)

arch/arm/mach-s3c64xx/dma.c

@@ -28,10 +28,10 @@
 #include <mach/map.h>
 #include <mach/irqs.h>
 
-#include <mach/regs-sys.h>
-
 #include <asm/hardware/pl080.h>
 
+#include "regs-sys.h"
+
 /* dma channel state information */
 
 struct s3c64xx_dmac {

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -50,7 +50,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 
 #include <plat/regs-serial.h>
@@ -71,6 +70,7 @@
 #include "crag6410.h"
 #include "regs-gpio-memport.h"
 #include "regs-modem.h"
+#include "regs-sys.h"
 
 /* serial port setup */
 

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -58,7 +58,6 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-sys.h>
 #include <linux/platform_data/ata-samsung_cf.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
@@ -75,6 +74,7 @@
 #include "common.h"
 #include "regs-modem.h"
 #include "regs-srom.h"
+#include "regs-sys.h"
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB

arch/arm/mach-s3c64xx/pm.c

@@ -26,13 +26,13 @@
 #include <plat/pm.h>
 #include <plat/wakeup-mask.h>
 
-#include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-syscon-power.h>
 
 #include "regs-gpio-memport.h"
 #include "regs-modem.h"
+#include "regs-sys.h"
 
 struct s3c64xx_pm_domain {
 	char *const name;

arch/arm/mach-s3c64xx/include/mach/regs-sys.h → arch/arm/mach-s3c64xx/regs-sys.h

-/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -12,20 +11,20 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __PLAT_REGS_SYS_H
-#define __PLAT_REGS_SYS_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_SYS_H
+#define __MACH_S3C64XX_REGS_SYS_H __FILE__
 
-#define S3C_SYSREG(x)		(S3C_VA_SYS + (x))
+#define S3C_SYSREG(x)			(S3C_VA_SYS + (x))
 
-#define S3C64XX_AHB_CON0	S3C_SYSREG(0x100)
-#define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
-#define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
+#define S3C64XX_AHB_CON0		S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1		S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2		S3C_SYSREG(0x108)
 
-#define S3C64XX_SDMA_SEL	S3C_SYSREG(0x110)
+#define S3C64XX_SDMA_SEL		S3C_SYSREG(0x110)
 
-#define S3C64XX_OTHERS		S3C_SYSREG(0x900)
+#define S3C64XX_OTHERS			S3C_SYSREG(0x900)
 
-#define S3C64XX_OTHERS_USBMASK	(1 << 16)
+#define S3C64XX_OTHERS_USBMASK		(1 << 16)
 #define S3C64XX_OTHERS_SYNCMUXSEL	(1 << 6)
 
-#endif /* _PLAT_REGS_SYS_H */
+#endif /* __MACH_S3C64XX_REGS_SYS_H */

arch/arm/mach-s3c64xx/setup-usb-phy.c

@@ -15,11 +15,12 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <mach/map.h>
-#include <mach/regs-sys.h>
 #include <plat/cpu.h>
 #include <plat/regs-usb-hsotg-phy.h>
 #include <plat/usb-phy.h>
 
+#include "regs-sys.h"
+
 static int s3c_usb_otgphy_init(struct platform_device *pdev)
 {
 	struct clk *xusbxti;