clk: zx: register ZX296718 clocks

The ZX296718 clocks are statically listed and registered. More
clock will be added later.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Documentation/devicetree/bindings/clock/zx296718-clk.txt

+Device Tree Clock bindings for ZTE zx296718
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"zte,zx296718-topcrm":
+		zx296718 top clock selection, divider and gating
+
+	"zte,zx296718-lsp0crm" and
+	"zte,zx296718-lsp1crm":
+		zx296718 device level clock selection and gating
+
+- reg: Address and length of the register set
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296718-clock.h
+for the full list of zx296718 clock IDs.
+
+
+topclk: topcrm@1461000 {
+        compatible = "zte,zx296718-topcrm-clk";
+        reg = <0x01461000 0x1000>;
+        #clock-cells = <1>;
+};
+
+usbphy0:usb-phy0 {
+	compatible = "zte,zx296718-usb-phy";
+	#phy-cells = <0>;
+	clocks = <&topclk USB20_PHY_CLK>;
+	clock-names = "phyclk";
+	status = "okay";
+};

drivers/clk/zte/Makefile

 obj-y := clk.o
 obj-$(CONFIG_SOC_ZX296702) += clk-zx296702.o
+obj-$(CONFIG_ARCH_ZX) += clk-zx296718.o

drivers/clk/zte/clk.h

@@ -12,6 +12,26 @@
 #include <linux/clk-provider.h>
 #include <linux/spinlock.h>
 
+#define PNAME(x) static const char *x[]
+
+#define CLK_HW_INIT(_name, _parent, _ops, _flags)			\
+	&(struct clk_init_data) {					\
+		.flags		= _flags,				\
+		.name		= _name,				\
+		.parent_names	= (const char *[]) { _parent },		\
+		.num_parents	= 1,					\
+		.ops		= _ops,					\
+	}
+
+#define CLK_HW_INIT_PARENTS(_name, _parents, _ops, _flags)		\
+	&(struct clk_init_data) {					\
+		.flags		= _flags,				\
+		.name		= _name,				\
+		.parent_names	= _parents,				\
+		.num_parents	= ARRAY_SIZE(_parents),			\
+		.ops		= _ops,					\
+	}
+
 struct zx_pll_config {
 	unsigned long rate;
 	u32 cfg0;
@@ -28,6 +48,111 @@ struct clk_zx_pll {
 	u8 lock_bit;		/* pll lock flag bit */
 };
 
+#define PLL_RATE(_rate, _cfg0, _cfg1)	\
+{					\
+	.rate = _rate,			\
+	.cfg0 = _cfg0,			\
+	.cfg1 = _cfg1,			\
+}
+
+#define ZX_PLL(_name, _parent, _reg, _table, _pd, _lock)		\
+{									\
+	.reg_base	= (void __iomem *) _reg,			\
+	.lookup_table	= _table,					\
+	.count		= ARRAY_SIZE(_table),				\
+	.pd_bit		= _pd,						\
+	.lock_bit	= _lock,					\
+	.hw.init	 = CLK_HW_INIT(_name, _parent, &zx_pll_ops,	\
+				CLK_GET_RATE_NOCACHE),			\
+}
+
+#define ZX296718_PLL(_name, _parent, _reg, _table)			\
+ZX_PLL(_name, _parent, _reg, _table, 0, 30)
+
+struct zx_clk_gate {
+	struct clk_gate gate;
+	u16		id;
+};
+
+#define GATE(_id, _name, _parent, _reg, _bit, _flag, _gflags)		\
+{									\
+	.gate = {							\
+		.reg = (void __iomem *) _reg,				\
+		.bit_idx = (_bit),					\
+		.flags = _gflags,					\
+		.lock = &clk_lock,					\
+		.hw.init = CLK_HW_INIT(_name,				\
+					_parent,			\
+					&clk_gate_ops,			\
+					_flag | CLK_IGNORE_UNUSED),	\
+	},								\
+	.id	= _id,							\
+}
+
+struct zx_clk_fixed_factor {
+	struct clk_fixed_factor factor;
+	u16	id;
+};
+
+#define FFACTOR(_id, _name, _parent, _mult, _div, _flag)		\
+{									\
+	.factor = {							\
+		.div		= _div,					\
+		.mult		= _mult,				\
+		.hw.init	= CLK_HW_INIT(_name,			\
+					      _parent,			\
+					      &clk_fixed_factor_ops,	\
+					      _flag),			\
+	},								\
+	.id = _id,							\
+}
+
+struct zx_clk_mux {
+	struct clk_mux mux;
+	u16	id;
+};
+
+#define MUX_F(_id, _name, _parent, _reg, _shift, _width, _flag, _mflag)	\
+{									\
+	.mux = {							\
+		.reg		= (void __iomem *) _reg,		\
+		.mask		= BIT(_width) - 1,			\
+		.shift		= _shift,				\
+		.flags		= _mflag,				\
+		.lock		= &clk_lock,				\
+		.hw.init	= CLK_HW_INIT_PARENTS(_name,		\
+						      _parent,		\
+						      &clk_mux_ops,	\
+						      _flag),		\
+	},								\
+	.id = _id,							\
+}
+
+#define MUX(_id, _name, _parent, _reg, _shift, _width)			\
+MUX_F(_id, _name, _parent, _reg, _shift, _width, 0, 0)
+
+struct zx_clk_div {
+	struct clk_divider div;
+	u16	id;
+};
+
+#define DIV_T(_id, _name, _parent, _reg, _shift, _width, _flag, _table)	\
+{									\
+	.div = {							\
+		.reg		= (void __iomem *) _reg,		\
+		.shift		= _shift,				\
+		.width		= _width,				\
+		.flags		= 0,					\
+		.table		= _table,				\
+		.lock		= &clk_lock,				\
+		.hw.init	= CLK_HW_INIT(_name,			\
+					      _parent,			\
+					      &clk_divider_ops,		\
+					      _flag),			\
+	},								\
+	.id = _id,							\
+}
+
 struct clk *clk_register_zx_pll(const char *name, const char *parent_name,
 	unsigned long flags, void __iomem *reg_base,
 	const struct zx_pll_config *lookup_table, int count, spinlock_t *lock);

include/dt-bindings/clock/zx296718-clock.h

+/*
+ * Copyright (C) 2015 - 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __DT_BINDINGS_CLOCK_ZX296718_H
+#define __DT_BINDINGS_CLOCK_ZX296718_H
+
+/* PLL */
+#define ZX296718_PLL_CPU	1
+#define ZX296718_PLL_MAC	2
+#define ZX296718_PLL_MM0	3
+#define ZX296718_PLL_MM1	4
+#define ZX296718_PLL_VGA	5
+#define ZX296718_PLL_DDR	6
+#define ZX296718_PLL_AUDIO	7
+#define ZX296718_PLL_HSIC	8
+#define CPU_DBG_GATE		9
+#define A72_GATE		10
+#define CPU_PERI_GATE		11
+#define A53_GATE		12
+#define DDR1_GATE		13
+#define DDR0_GATE		14
+#define SD1_WCLK		15
+#define SD1_AHB			16
+#define SD0_WCLK		17
+#define SD0_AHB			18
+#define EMMC_WCLK		19
+#define EMMC_NAND_AXI		20
+#define NAND_WCLK		21
+#define EMMC_NAND_AHB		22
+#define LSP1_148M5		23
+#define LSP1_99M		24
+#define LSP1_24M		25
+#define LSP0_74M25		26
+#define LSP0_32K		27
+#define LSP0_148M5		28
+#define LSP0_99M		29
+#define LSP0_24M		30
+#define DEMUX_AXI		31
+#define DEMUX_APB		32
+#define DEMUX_148M5		33
+#define DEMUX_108M		34
+#define AUDIO_APB		35
+#define AUDIO_99M		36
+#define AUDIO_24M		37
+#define AUDIO_16M384		38
+#define AUDIO_32K		39
+#define WDT_WCLK		40
+#define TIMER_WCLK		41
+#define VDE_ACLK		42
+#define VCE_ACLK		43
+#define HDE_ACLK		44
+#define GPU_ACLK		45
+#define SAPPU_ACLK		46
+#define SAPPU_WCLK		47
+#define VOU_ACLK		48
+#define VOU_MAIN_WCLK		49
+#define VOU_AUX_WCLK		50
+#define VOU_PPU_WCLK		51
+#define MIPI_CFG_CLK		52
+#define VGA_I2C_WCLK		53
+#define MIPI_REF_CLK		54
+#define HDMI_OSC_CEC		55
+#define HDMI_OSC_CLK		56
+#define HDMI_XCLK		57
+#define VIU_M0_ACLK		58
+#define VIU_M1_ACLK		59
+#define VIU_WCLK		60
+#define VIU_JPEG_WCLK		61
+#define VIU_CFG_CLK		62
+#define TS_SYS_WCLK		63
+#define TS_SYS_108M		64
+#define USB20_HCLK		65
+#define USB20_PHY_CLK		66
+#define USB21_HCLK		67
+#define USB21_PHY_CLK		68
+#define GMAC_RMIICLK		69
+#define GMAC_PCLK		70
+#define GMAC_ACLK		71
+#define GMAC_RFCLK		72
+#define TEMPSENSOR_GATE		73
+
+#define TOP_NR_CLKS		74
+
+
+#define LSP0_TIMER3_PCLK	1
+#define LSP0_TIMER3_WCLK	2
+#define LSP0_TIMER4_PCLK	3
+#define LSP0_TIMER4_WCLK	4
+#define LSP0_TIMER5_PCLK	5
+#define LSP0_TIMER5_WCLK	6
+#define LSP0_UART3_PCLK		7
+#define LSP0_UART3_WCLK		8
+#define LSP0_UART1_PCLK		9
+#define LSP0_UART1_WCLK		10
+#define LSP0_UART2_PCLK		11
+#define LSP0_UART2_WCLK		12
+#define LSP0_SPIFC0_PCLK	13
+#define LSP0_SPIFC0_WCLK	14
+#define LSP0_I2C4_PCLK		15
+#define LSP0_I2C4_WCLK		16
+#define LSP0_I2C5_PCLK		17
+#define LSP0_I2C5_WCLK		18
+#define LSP0_SSP0_PCLK		19
+#define LSP0_SSP0_WCLK		20
+#define LSP0_SSP1_PCLK		21
+#define LSP0_SSP1_WCLK		22
+#define LSP0_USIM_PCLK		23
+#define LSP0_USIM_WCLK		24
+#define LSP0_GPIO_PCLK		25
+#define LSP0_GPIO_WCLK		26
+#define LSP0_I2C3_PCLK		27
+#define LSP0_I2C3_WCLK		28
+
+#define LSP0_NR_CLKS		29
+
+
+#define LSP1_UART4_PCLK		1
+#define LSP1_UART4_WCLK		2
+#define LSP1_UART5_PCLK		3
+#define LSP1_UART5_WCLK		4
+#define LSP1_PWM_PCLK		5
+#define LSP1_PWM_WCLK		6
+#define LSP1_I2C2_PCLK		7
+#define LSP1_I2C2_WCLK		8
+#define LSP1_SSP2_PCLK		9
+#define LSP1_SSP2_WCLK		10
+#define LSP1_SSP3_PCLK		11
+#define LSP1_SSP3_WCLK		12
+#define LSP1_SSP4_PCLK		13
+#define LSP1_SSP4_WCLK		14
+#define LSP1_USIM1_PCLK		15
+#define LSP1_USIM1_WCLK		16
+
+#define LSP1_NR_CLKS		17
+
+
+#define AUDIO_I2S0_WCLK		1
+#define AUDIO_I2S0_PCLK		2
+#define AUDIO_I2S1_WCLK		3
+#define AUDIO_I2S1_PCLK		4
+#define AUDIO_I2S2_WCLK		5
+#define AUDIO_I2S2_PCLK		6
+#define AUDIO_I2S3_WCLK		7
+#define AUDIO_I2S3_PCLK		8
+#define AUDIO_I2C0_WCLK		9
+#define AUDIO_I2C0_PCLK		10
+#define AUDIO_SPDIF0_WCLK	11
+#define AUDIO_SPDIF0_PCLK	12
+#define AUDIO_SPDIF1_WCLK	13
+#define AUDIO_SPDIF1_PCLK	14
+#define AUDIO_TIMER_WCLK	15
+#define AUDIO_TIMER_PCLK	16
+#define AUDIO_TDM_WCLK		17
+#define AUDIO_TDM_PCLK		18
+#define AUDIO_TS_PCLK		19
+
+#define AUDIO_NR_CLKS		20
+
+#endif