Commit f3419735 authored by Stefan Wahren's avatar Stefan Wahren Committed by Felipe Balbi

usb: dwc2: Do not set host parameter in peripheral mode

Since commit "usb: dwc2: Improve handling of host and device hwparams" the
host mode specific hardware parameter aren't initialized in peripheral mode
from the register settings anymore. So we better do not set them in this
case which avoids the following warnings on bcm2835:

  256 invalid for host_nperio_tx_fifo_size. Check HW configuration.
  512 invalid for host_perio_tx_fifo_size. Check HW configuration.

Fixes: 55e1040e ("usb: dwc2: Improve handling of host and device hwparams")
Acked-by: default avatarJohn Youn <johnyoun@synopsys.com>
Signed-off-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
parent 0c744ea4
...@@ -1132,6 +1132,12 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg, ...@@ -1132,6 +1132,12 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
false, "host-dma", false, "host-dma",
true, false, true, false,
dma_capable); dma_capable);
dwc2_set_param_host_rx_fifo_size(hsotg,
params->host_rx_fifo_size);
dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
params->host_nperio_tx_fifo_size);
dwc2_set_param_host_perio_tx_fifo_size(hsotg,
params->host_perio_tx_fifo_size);
} }
dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable); dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable);
dwc2_set_param_dma_desc_fs_enable(hsotg, params->dma_desc_fs_enable); dwc2_set_param_dma_desc_fs_enable(hsotg, params->dma_desc_fs_enable);
...@@ -1140,12 +1146,6 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg, ...@@ -1140,12 +1146,6 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
params->host_support_fs_ls_low_power); params->host_support_fs_ls_low_power);
dwc2_set_param_enable_dynamic_fifo(hsotg, dwc2_set_param_enable_dynamic_fifo(hsotg,
params->enable_dynamic_fifo); params->enable_dynamic_fifo);
dwc2_set_param_host_rx_fifo_size(hsotg,
params->host_rx_fifo_size);
dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
params->host_nperio_tx_fifo_size);
dwc2_set_param_host_perio_tx_fifo_size(hsotg,
params->host_perio_tx_fifo_size);
dwc2_set_param_max_transfer_size(hsotg, dwc2_set_param_max_transfer_size(hsotg,
params->max_transfer_size); params->max_transfer_size);
dwc2_set_param_max_packet_count(hsotg, dwc2_set_param_max_packet_count(hsotg,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment