Commit f34ec800 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: daqboard2000: cleanup "find pci device" code

The "find pci device" code for this driver was quite a bit
different from the other comedi pci drivers. Clean it up so
it follows the format of the other drivers.

Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().

Check for a specific bus/slot then the vendor/device ids.

The loop checking for the matching boardinfo was creating an
"id" based on the subsystem_device and subsystem_vendor info
from the pci_dev. The vendor id was already checked so just
check against the subsystem_device.

Only return the pci_dev if a matching boardinfo is found.

Consolidate the dev_err messages when a device is not found
into a single message.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 6896ddfa
......@@ -120,8 +120,10 @@ Configuration options:
#include "8255.h"
#define DAQBOARD2000_SUBSYSTEM_IDS2 0x00021616 /* Daqboard/2000 - 2 Dacs */
#define DAQBOARD2000_SUBSYSTEM_IDS4 0x00041616 /* Daqboard/2000 - 4 Dacs */
#define PCI_VENDOR_ID_IOTECH 0x1616
#define DAQBOARD2000_SUBSYSTEM_IDS2 0x0002 /* Daqboard/2000 - 2 Dacs */
#define DAQBOARD2000_SUBSYSTEM_IDS4 0x0004 /* Daqboard/2000 - 4 Dacs */
#define DAQBOARD2000_DAQ_SIZE 0x1002
#define DAQBOARD2000_PLX_SIZE 0x100
......@@ -709,47 +711,29 @@ static struct pci_dev *daqboard2000_find_pci_dev(struct comedi_device *dev,
struct pci_dev *pcidev = NULL;
int bus = it->options[0];
int slot = it->options[1];
int i;
for (pcidev = pci_get_device(0x1616, 0x0409, NULL);
pcidev != NULL; pcidev = pci_get_device(0x1616, 0x0409, pcidev)) {
for_each_pci_dev(pcidev) {
if (bus || slot) {
/* requested particular bus/slot */
if (pcidev->bus->number != bus ||
PCI_SLOT(pcidev->devfn) != slot) {
if (bus != pcidev->bus->number ||
slot != PCI_SLOT(pcidev->devfn))
continue;
}
}
break; /* found one */
}
if (!pcidev) {
if (bus || slot)
dev_err(dev->class_dev,
"no daqboard2000 found at bus/slot: %d/%d\n",
bus, slot);
else
dev_err(dev->class_dev, "no daqboard2000 found\n");
return NULL;
} else {
u32 id;
int i;
if (pcidev->vendor != PCI_VENDOR_ID_IOTECH ||
pcidev->device != 0x0409)
continue;
id = ((u32) pcidev->
subsystem_device << 16) | pcidev->subsystem_vendor;
for (i = 0; i < ARRAY_SIZE(boardtypes); i++) {
if (boardtypes[i].id == id) {
dev_dbg(dev->class_dev, "%s\n",
boardtypes[i].name);
dev->board_ptr = boardtypes + i;
}
}
if (!dev->board_ptr) {
printk
(" unknown subsystem id %08x (pretend it is an ids2)",
id);
dev->board_ptr = boardtypes;
if (boardtypes[i].id != pcidev->subsystem_device)
continue;
dev->board_ptr = boardtypes + i;
return pcidev;
}
return pcidev;
}
dev_err(dev->class_dev,
"No supported board found! (req. bus %d, slot %d)\n",
bus, slot);
return NULL;
}
static int daqboard2000_attach(struct comedi_device *dev,
......@@ -886,7 +870,7 @@ static void __devexit daqboard2000_pci_remove(struct pci_dev *dev)
}
static DEFINE_PCI_DEVICE_TABLE(daqboard2000_pci_table) = {
{ PCI_DEVICE(0x1616, 0x0409) },
{ PCI_DEVICE(PCI_VENDOR_ID_IOTECH, 0x0409) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, daqboard2000_pci_table);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment