Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID updates from Jiri Kosina:

 - support for new Wacom "MobileStudio Pro" class of tablets from Jason
   Gerecke

 - Microsoft Surface 3 support from Benjamin Tissoires and Microsoft
   Surface 4 support from Daniel Keller

 - uDraw PS3 tablet support from Bastien Nocera

 - timeout scheduling fixes for intel-ish-hid from Even Xu

 - HID_QUIRK_MULTI_INPUT in order to simplify LED handling from Benjamin
   Tissoires

 - support for Sony DS4 dongle and various other fixes to Sony driver
   from Roderick Colenbrander

 - other assorted smaller fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (63 commits)
  HID: fix missing irq field
  HID: i2c-hid: fix build
  HID: i2c-hid: Disable IRQ before freeing buffers
  HID: usbhid: fix improper return value
  HID: wacom: generic: Don't sync input on empty input packets
  HID: wacom: generic: Pad supports more than buttons
  HID: wacom: generic: Send data only when the interface is defined
  HID: wacom: generic: Don't return a value for wacom_wac_event
  HID: intel_ish-hid: use %pUL for uuid formatting
  HID: cp2112: explicitly require irqchip support in gpiolib
  HID: asus: Add i2c touchpad support
  HID: intel-ish-hid: Fix potential race condition
  HID: sony: Support DS4 dongle
  HID: sony: Comply to Linux gamepad spec for DS4
  HID: sony: Make the DS4 touchpad a separate device
  HID: sony: Fix memory issue when connecting device using both Bluetooth and USB
  HID: cp2112: add IRQ chip handling
  HID: i2c-hid: force the IRQ level trigger only when not set
  HID: multitouch: do not retrieve all reports for all devices
  HID: multitouch: enable the Surface 3 Type Cover to report multitouch data
  ...

MAINTAINERS

@@ -12488,6 +12488,12 @@ S:	Maintained
 F:	Documentation/filesystems/udf.txt
 F:	fs/udf/
 
+UDRAW TABLET
+M:	Bastien Nocera <hadess@hadess.net>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/hid/hid-udraw.c
+
 UFS FILESYSTEM
 M:	Evgeniy Dushistov <dushistov@mail.ru>
 S:	Maintained

drivers/hid/Kconfig

@@ -138,7 +138,7 @@ config HID_ASUS
 	tristate "Asus"
 	depends on I2C_HID
 	---help---
-	Support for Asus notebook built-in keyboard via i2c.
+	Support for Asus notebook built-in keyboard and touchpad via i2c.
 
 	Supported devices:
 	- EeeBook X205TA
@@ -214,7 +214,7 @@ config HID_CMEDIA
 
 config HID_CP2112
 	tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
-	depends on USB_HID && I2C && GPIOLIB
+	depends on USB_HID && I2C && GPIOLIB && GPIOLIB_IRQCHIP
 	---help---
 	Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
 	This is a HID device driver which registers as an i2c adapter
@@ -512,6 +512,14 @@ config HID_MAGICMOUSE
 	Say Y here if you want support for the multi-touch features of the
 	Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
 
+config HID_MAYFLASH
+	tristate "Mayflash game controller adapter force feedback"
+	depends on HID
+	select INPUT_FF_MEMLESS
+	---help---
+	Say Y here if you have HJZ Mayflash PS3 game controller adapters
+	and want to enable force feedback support.
+
 config HID_MICROSOFT
 	tristate "Microsoft non-fully HID-compliant devices"
 	depends on HID
@@ -861,6 +869,13 @@ config THRUSTMASTER_FF
 	  a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari GT
 	  Rumble Force or Force Feedback Wheel.
 
+config HID_UDRAW_PS3
+	tristate "THQ PS3 uDraw tablet"
+	depends on HID
+	---help---
+	  Say Y here if you want to use the THQ uDraw gaming tablet for
+	  the PS3.
+
 config HID_WACOM
 	tristate "Wacom Intuos/Graphire tablet support (USB)"
 	depends on HID

drivers/hid/Makefile

@@ -58,6 +58,7 @@ obj-$(CONFIG_HID_LOGITECH)	+= hid-logitech.o
 obj-$(CONFIG_HID_LOGITECH_DJ)	+= hid-logitech-dj.o
 obj-$(CONFIG_HID_LOGITECH_HIDPP)	+= hid-logitech-hidpp.o
 obj-$(CONFIG_HID_MAGICMOUSE)	+= hid-magicmouse.o
+obj-$(CONFIG_HID_MAYFLASH)	+= hid-mf.o
 obj-$(CONFIG_HID_MICROSOFT)	+= hid-microsoft.o
 obj-$(CONFIG_HID_MONTEREY)	+= hid-monterey.o
 obj-$(CONFIG_HID_MULTITOUCH)	+= hid-multitouch.o
@@ -96,6 +97,7 @@ obj-$(CONFIG_HID_TIVO)		+= hid-tivo.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
 obj-$(CONFIG_HID_TWINHAN)	+= hid-twinhan.o
 obj-$(CONFIG_HID_UCLOGIC)	+= hid-uclogic.o
+obj-$(CONFIG_HID_UDRAW_PS3)	+= hid-udraw-ps3.o
 obj-$(CONFIG_HID_LED)		+= hid-led.o
 obj-$(CONFIG_HID_XINMO)		+= hid-xinmo.o
 obj-$(CONFIG_HID_ZEROPLUS)	+= hid-zpff.o

drivers/hid/hid-asus.c

@@ -11,6 +11,12 @@
  *  This module based on hid-ortek by
  *  Copyright (c) 2010 Johnathon Harris <jmharris@gmail.com>
  *  Copyright (c) 2011 Jiri Kosina
+ *
+ *  This module has been updated to add support for Asus i2c touchpad.
+ *
+ *  Copyright (c) 2016 Brendan McGrath <redmcg@redmandi.dyndns.org>
+ *  Copyright (c) 2016 Victor Vlasenko <victor.vlasenko@sysgears.com>
+ *  Copyright (c) 2016 Frederik Wenigwieser <frederik.wenigwieser@gmail.com>
  */
 
 /*
@@ -20,16 +26,287 @@
  * any later version.
  */
 
-#include <linux/device.h>
 #include <linux/hid.h>
 #include <linux/module.h>
+#include <linux/input/mt.h>
 
 #include "hid-ids.h"
 
+MODULE_AUTHOR("Yusuke Fujimaki <usk.fujimaki@gmail.com>");
+MODULE_AUTHOR("Brendan McGrath <redmcg@redmandi.dyndns.org>");
+MODULE_AUTHOR("Victor Vlasenko <victor.vlasenko@sysgears.com>");
+MODULE_AUTHOR("Frederik Wenigwieser <frederik.wenigwieser@gmail.com>");
+MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
+
+#define FEATURE_REPORT_ID 0x0d
+#define INPUT_REPORT_ID 0x5d
+
+#define INPUT_REPORT_SIZE 28
+
+#define MAX_CONTACTS 5
+
+#define MAX_X 2794
+#define MAX_Y 1758
+#define MAX_TOUCH_MAJOR 8
+#define MAX_PRESSURE 128
+
+#define CONTACT_DATA_SIZE 5
+
+#define BTN_LEFT_MASK 0x01
+#define CONTACT_TOOL_TYPE_MASK 0x80
+#define CONTACT_X_MSB_MASK 0xf0
+#define CONTACT_Y_MSB_MASK 0x0f
+#define CONTACT_TOUCH_MAJOR_MASK 0x07
+#define CONTACT_PRESSURE_MASK 0x7f
+
+#define QUIRK_FIX_NOTEBOOK_REPORT	BIT(0)
+#define QUIRK_NO_INIT_REPORTS		BIT(1)
+#define QUIRK_SKIP_INPUT_MAPPING	BIT(2)
+#define QUIRK_IS_MULTITOUCH		BIT(3)
+
+#define NOTEBOOK_QUIRKS			QUIRK_FIX_NOTEBOOK_REPORT
+#define TOUCHPAD_QUIRKS			(QUIRK_NO_INIT_REPORTS | \
+						 QUIRK_SKIP_INPUT_MAPPING | \
+						 QUIRK_IS_MULTITOUCH)
+
+#define TRKID_SGN       ((TRKID_MAX + 1) >> 1)
+
+struct asus_drvdata {
+	unsigned long quirks;
+	struct input_dev *input;
+};
+
+static void asus_report_contact_down(struct input_dev *input,
+		int toolType, u8 *data)
+{
+	int touch_major, pressure;
+	int x = (data[0] & CONTACT_X_MSB_MASK) << 4 | data[1];
+	int y = MAX_Y - ((data[0] & CONTACT_Y_MSB_MASK) << 8 | data[2]);
+
+	if (toolType == MT_TOOL_PALM) {
+		touch_major = MAX_TOUCH_MAJOR;
+		pressure = MAX_PRESSURE;
+	} else {
+		touch_major = (data[3] >> 4) & CONTACT_TOUCH_MAJOR_MASK;
+		pressure = data[4] & CONTACT_PRESSURE_MASK;
+	}
+
+	input_report_abs(input, ABS_MT_POSITION_X, x);
+	input_report_abs(input, ABS_MT_POSITION_Y, y);
+	input_report_abs(input, ABS_MT_TOUCH_MAJOR, touch_major);
+	input_report_abs(input, ABS_MT_PRESSURE, pressure);
+}
+
+/* Required for Synaptics Palm Detection */
+static void asus_report_tool_width(struct input_dev *input)
+{
+	struct input_mt *mt = input->mt;
+	struct input_mt_slot *oldest;
+	int oldid, count, i;
+
+	oldest = NULL;
+	oldid = mt->trkid;
+	count = 0;
+
+	for (i = 0; i < mt->num_slots; ++i) {
+		struct input_mt_slot *ps = &mt->slots[i];
+		int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID);
+
+		if (id < 0)
+			continue;
+		if ((id - oldid) & TRKID_SGN) {
+			oldest = ps;
+			oldid = id;
+		}
+		count++;
+	}
+
+	if (oldest) {
+		input_report_abs(input, ABS_TOOL_WIDTH,
+			input_mt_get_value(oldest, ABS_MT_TOUCH_MAJOR));
+	}
+}
+
+static void asus_report_input(struct input_dev *input, u8 *data)
+{
+	int i;
+	u8 *contactData = data + 2;
+
+	for (i = 0; i < MAX_CONTACTS; i++) {
+		bool down = !!(data[1] & BIT(i+3));
+		int toolType = contactData[3] & CONTACT_TOOL_TYPE_MASK ?
+						MT_TOOL_PALM : MT_TOOL_FINGER;
+
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, toolType, down);
+
+		if (down) {
+			asus_report_contact_down(input, toolType, contactData);
+			contactData += CONTACT_DATA_SIZE;
+		}
+	}
+
+	input_report_key(input, BTN_LEFT, data[1] & BTN_LEFT_MASK);
+	asus_report_tool_width(input);
+
+	input_mt_sync_frame(input);
+	input_sync(input);
+}
+
+static int asus_raw_event(struct hid_device *hdev,
+		struct hid_report *report, u8 *data, int size)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & QUIRK_IS_MULTITOUCH &&
+					 data[0] == INPUT_REPORT_ID &&
+						size == INPUT_REPORT_SIZE) {
+		asus_report_input(drvdata->input, data);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int asus_input_configured(struct hid_device *hdev, struct hid_input *hi)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & QUIRK_IS_MULTITOUCH) {
+		int ret;
+		struct input_dev *input = hi->input;
+
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0, MAX_X, 0, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0, MAX_Y, 0, 0);
+		input_set_abs_params(input, ABS_TOOL_WIDTH, 0, MAX_TOUCH_MAJOR, 0, 0);
+		input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, MAX_TOUCH_MAJOR, 0, 0);
+		input_set_abs_params(input, ABS_MT_PRESSURE, 0, MAX_PRESSURE, 0, 0);
+
+		__set_bit(BTN_LEFT, input->keybit);
+		__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+
+		ret = input_mt_init_slots(input, MAX_CONTACTS, INPUT_MT_POINTER);
+
+		if (ret) {
+			hid_err(hdev, "Asus input mt init slots failed: %d\n", ret);
+			return ret;
+		}
+
+		drvdata->input = input;
+	}
+
+	return 0;
+}
+
+static int asus_input_mapping(struct hid_device *hdev,
+		struct hid_input *hi, struct hid_field *field,
+		struct hid_usage *usage, unsigned long **bit,
+		int *max)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & QUIRK_SKIP_INPUT_MAPPING) {
+		/* Don't map anything from the HID report.
+		 * We do it all manually in asus_input_configured
+		 */
+		return -1;
+	}
+
+	return 0;
+}
+
+static int asus_start_multitouch(struct hid_device *hdev)
+{
+	int ret;
+	const unsigned char buf[] = { FEATURE_REPORT_ID, 0x00, 0x03, 0x01, 0x00 };
+	unsigned char *dmabuf = kmemdup(buf, sizeof(buf), GFP_KERNEL);
+
+	if (!dmabuf) {
+		ret = -ENOMEM;
+		hid_err(hdev, "Asus failed to alloc dma buf: %d\n", ret);
+		return ret;
+	}
+
+	ret = hid_hw_raw_request(hdev, dmabuf[0], dmabuf, sizeof(buf),
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+
+	kfree(dmabuf);
+
+	if (ret != sizeof(buf)) {
+		hid_err(hdev, "Asus failed to start multitouch: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused asus_reset_resume(struct hid_device *hdev)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & QUIRK_IS_MULTITOUCH)
+		return asus_start_multitouch(hdev);
+
+	return 0;
+}
+
+static int asus_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct asus_drvdata *drvdata;
+
+	drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (drvdata == NULL) {
+		hid_err(hdev, "Can't alloc Asus descriptor\n");
+		return -ENOMEM;
+	}
+
+	hid_set_drvdata(hdev, drvdata);
+
+	drvdata->quirks = id->driver_data;
+
+	if (drvdata->quirks & QUIRK_NO_INIT_REPORTS)
+		hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "Asus hid parse failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "Asus hw start failed: %d\n", ret);
+		return ret;
+	}
+
+	if (!drvdata->input) {
+		hid_err(hdev, "Asus input not registered\n");
+		ret = -ENOMEM;
+		goto err_stop_hw;
+	}
+
+	drvdata->input->name = "Asus TouchPad";
+
+	if (drvdata->quirks & QUIRK_IS_MULTITOUCH) {
+		ret = asus_start_multitouch(hdev);
+		if (ret)
+			goto err_stop_hw;
+	}
+
+	return 0;
+err_stop_hw:
+	hid_hw_stop(hdev);
+	return ret;
+}
+
 static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
-	if (*rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x65) {
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & QUIRK_FIX_NOTEBOOK_REPORT &&
+			*rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x65) {
 		hid_info(hdev, "Fixing up Asus notebook report descriptor\n");
 		rdesc[55] = 0xdd;
 	}
@@ -37,15 +314,25 @@ static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 }
 
 static const struct hid_device_id asus_devices[] = {
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD) },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
+		 USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD), NOTEBOOK_QUIRKS},
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
+			 USB_DEVICE_ID_ASUSTEK_TOUCHPAD), TOUCHPAD_QUIRKS },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, asus_devices);
 
 static struct hid_driver asus_driver = {
-	.name = "asus",
-	.id_table = asus_devices,
-	.report_fixup = asus_report_fixup
+	.name			= "asus",
+	.id_table		= asus_devices,
+	.report_fixup		= asus_report_fixup,
+	.probe                  = asus_probe,
+	.input_mapping          = asus_input_mapping,
+	.input_configured       = asus_input_configured,
+#ifdef CONFIG_PM
+	.reset_resume           = asus_reset_resume,
+#endif
+	.raw_event		= asus_raw_event
 };
 module_hid_driver(asus_driver);
 

drivers/hid/hid-core.c

@@ -727,8 +727,9 @@ static void hid_scan_collection(struct hid_parser *parser, unsigned type)
 	    (hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3 ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2 ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP ||
+	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4 ||
+	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2 ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP ||
-	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_3 ||
 	     hid->product == USB_DEVICE_ID_MS_POWER_COVER) &&
 	    hid->group == HID_GROUP_MULTITOUCH)
 		hid->group = HID_GROUP_GENERIC;
@@ -1857,6 +1858,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD) },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_TOUCHPAD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AUREAL, USB_DEVICE_ID_AUREAL_W01RN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185BFM, 0x2208) },
@@ -1883,6 +1885,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELCOM, USB_DEVICE_ID_DELCOM_VISUAL_IND) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011) },
+#if IS_ENABLED(CONFIG_HID_MAYFLASH)
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3) },
+#endif
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_WN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_FA) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
@@ -1983,8 +1988,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_7K) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_600) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3KV1) },
@@ -2059,6 +2065,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SINO_LITE, USB_DEVICE_ID_SINO_LITE_CONTROLLER) },
@@ -2086,6 +2095,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THQ, USB_DEVICE_ID_THQ_PS3_UDRAW) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_YIYNOVA_TABLET) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_81) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_45) },

drivers/hid/hid-cp2112.c

@@ -24,6 +24,7 @@
  *   http://www.silabs.com/Support%20Documents/TechnicalDocs/AN495.pdf
  */
 
+#include <linux/gpio.h>
 #include <linux/gpio/driver.h>
 #include <linux/hid.h>
 #include <linux/i2c.h>
@@ -168,6 +169,12 @@ struct cp2112_device {
 	struct gpio_chip gc;
 	u8 *in_out_buffer;
 	spinlock_t lock;
+
+	struct gpio_desc *desc[8];
+	bool gpio_poll;
+	struct delayed_work gpio_poll_worker;
+	unsigned long irq_mask;
+	u8 gpio_prev_state;
 };
 
 static int gpio_push_pull = 0xFF;
@@ -233,7 +240,7 @@ static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	spin_unlock_irqrestore(&dev->lock, flags);
 }
 
-static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int cp2112_gpio_get_all(struct gpio_chip *chip)
 {
 	struct cp2112_device *dev = gpiochip_get_data(chip);
 	struct hid_device *hdev = dev->hdev;
@@ -252,7 +259,7 @@ static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
 		goto exit;
 	}
 
-	ret = (buf[1] >> offset) & 1;
+	ret = buf[1];
 
 exit:
 	spin_unlock_irqrestore(&dev->lock, flags);
@@ -260,6 +267,17 @@ static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return ret;
 }
 
+static int cp2112_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	int ret;
+
+	ret = cp2112_gpio_get_all(chip);
+	if (ret < 0)
+		return ret;
+
+	return (ret >> offset) & 1;
+}
+
 static int cp2112_gpio_direction_output(struct gpio_chip *chip,
 					unsigned offset, int value)
 {
@@ -1041,6 +1059,166 @@ static void chmod_sysfs_attrs(struct hid_device *hdev)
 	}
 }
 
+static void cp2112_gpio_irq_ack(struct irq_data *d)
+{
+}
+
+static void cp2112_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct cp2112_device *dev = gpiochip_get_data(gc);
+
+	__clear_bit(d->hwirq, &dev->irq_mask);
+}
+
+static void cp2112_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct cp2112_device *dev = gpiochip_get_data(gc);
+
+	__set_bit(d->hwirq, &dev->irq_mask);
+}
+
+static void cp2112_gpio_poll_callback(struct work_struct *work)
+{
+	struct cp2112_device *dev = container_of(work, struct cp2112_device,
+						 gpio_poll_worker.work);
+	struct irq_data *d;
+	u8 gpio_mask;
+	u8 virqs = (u8)dev->irq_mask;
+	u32 irq_type;
+	int irq, virq, ret;
+
+	ret = cp2112_gpio_get_all(&dev->gc);
+	if (ret == -ENODEV) /* the hardware has been disconnected */
+		return;
+	if (ret < 0)
+		goto exit;
+
+	gpio_mask = ret;
+
+	while (virqs) {
+		virq = ffs(virqs) - 1;
+		virqs &= ~BIT(virq);
+
+		if (!dev->gc.to_irq)
+			break;
+
+		irq = dev->gc.to_irq(&dev->gc, virq);
+
+		d = irq_get_irq_data(irq);
+		if (!d)
+			continue;
+
+		irq_type = irqd_get_trigger_type(d);
+
+		if (gpio_mask & BIT(virq)) {
+			/* Level High */
+
+			if (irq_type & IRQ_TYPE_LEVEL_HIGH)
+				handle_nested_irq(irq);
+
+			if ((irq_type & IRQ_TYPE_EDGE_RISING) &&
+			    !(dev->gpio_prev_state & BIT(virq)))
+				handle_nested_irq(irq);
+		} else {
+			/* Level Low */
+
+			if (irq_type & IRQ_TYPE_LEVEL_LOW)
+				handle_nested_irq(irq);
+
+			if ((irq_type & IRQ_TYPE_EDGE_FALLING) &&
+			    (dev->gpio_prev_state & BIT(virq)))
+				handle_nested_irq(irq);
+		}
+	}
+
+	dev->gpio_prev_state = gpio_mask;
+
+exit:
+	if (dev->gpio_poll)
+		schedule_delayed_work(&dev->gpio_poll_worker, 10);
+}
+
+
+static unsigned int cp2112_gpio_irq_startup(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct cp2112_device *dev = gpiochip_get_data(gc);
+
+	INIT_DELAYED_WORK(&dev->gpio_poll_worker, cp2112_gpio_poll_callback);
+
+	cp2112_gpio_direction_input(gc, d->hwirq);
+
+	if (!dev->gpio_poll) {
+		dev->gpio_poll = true;
+		schedule_delayed_work(&dev->gpio_poll_worker, 0);
+	}
+
+	cp2112_gpio_irq_unmask(d);
+	return 0;
+}
+
+static void cp2112_gpio_irq_shutdown(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct cp2112_device *dev = gpiochip_get_data(gc);
+
+	cancel_delayed_work_sync(&dev->gpio_poll_worker);
+}
+
+static int cp2112_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+	return 0;
+}
+
+static struct irq_chip cp2112_gpio_irqchip = {
+	.name = "cp2112-gpio",
+	.irq_startup = cp2112_gpio_irq_startup,
+	.irq_shutdown = cp2112_gpio_irq_shutdown,
+	.irq_ack = cp2112_gpio_irq_ack,
+	.irq_mask = cp2112_gpio_irq_mask,
+	.irq_unmask = cp2112_gpio_irq_unmask,
+	.irq_set_type = cp2112_gpio_irq_type,
+};
+
+static int __maybe_unused cp2112_allocate_irq(struct cp2112_device *dev,
+					      int pin)
+{
+	int ret;
+
+	if (dev->desc[pin])
+		return -EINVAL;
+
+	dev->desc[pin] = gpiochip_request_own_desc(&dev->gc, pin,
+						   "HID/I2C:Event");
+	if (IS_ERR(dev->desc[pin])) {
+		dev_err(dev->gc.parent, "Failed to request GPIO\n");
+		return PTR_ERR(dev->desc[pin]);
+	}
+
+	ret = gpiochip_lock_as_irq(&dev->gc, pin);
+	if (ret) {
+		dev_err(dev->gc.parent, "Failed to lock GPIO as interrupt\n");
+		goto err_desc;
+	}
+
+	ret = gpiod_to_irq(dev->desc[pin]);
+	if (ret < 0) {
+		dev_err(dev->gc.parent, "Failed to translate GPIO to IRQ\n");
+		goto err_lock;
+	}
+
+	return ret;
+
+err_lock:
+	gpiochip_unlock_as_irq(&dev->gc, pin);
+err_desc:
+	gpiochip_free_own_desc(dev->desc[pin]);
+	dev->desc[pin] = NULL;
+	return ret;
+}
+
 static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	struct cp2112_device *dev;
@@ -1163,8 +1341,17 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	chmod_sysfs_attrs(hdev);
 	hid_hw_power(hdev, PM_HINT_NORMAL);
 
+	ret = gpiochip_irqchip_add(&dev->gc, &cp2112_gpio_irqchip, 0,
+				   handle_simple_irq, IRQ_TYPE_NONE);
+	if (ret) {
+		dev_err(dev->gc.parent, "failed to add IRQ chip\n");
+		goto err_sysfs_remove;
+	}
+
 	return ret;
 
+err_sysfs_remove:
+	sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
 err_gpiochip_remove:
 	gpiochip_remove(&dev->gc);
 err_free_i2c:
@@ -1181,10 +1368,22 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 static void cp2112_remove(struct hid_device *hdev)
 {
 	struct cp2112_device *dev = hid_get_drvdata(hdev);
+	int i;
 
 	sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
-	gpiochip_remove(&dev->gc);
 	i2c_del_adapter(&dev->adap);
+
+	if (dev->gpio_poll) {
+		dev->gpio_poll = false;
+		cancel_delayed_work_sync(&dev->gpio_poll_worker);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(dev->desc); i++) {
+		gpiochip_unlock_as_irq(&dev->gc, i);
+		gpiochip_free_own_desc(dev->desc[i]);
+	}
+
+	gpiochip_remove(&dev->gc);
 	/* i2c_del_adapter has finished removing all i2c devices from our
 	 * adapter. Well behaved devices should no longer call our cp2112_xfer
 	 * and should have waited for any pending calls to finish. It has also

drivers/hid/hid-ids.h

@@ -171,6 +171,7 @@
 #define USB_DEVICE_ID_ASUSTEK_LCM	0x1726
 #define USB_DEVICE_ID_ASUSTEK_LCM2	0x175b
 #define USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD	0x8585
+#define USB_DEVICE_ID_ASUSTEK_TOUCHPAD	0x0101
 
 #define USB_VENDOR_ID_ATEN		0x0557
 #define USB_DEVICE_ID_ATEN_UC100KM	0x2004
@@ -315,8 +316,10 @@
 #define USB_VENDOR_ID_DMI		0x0c0b
 #define USB_DEVICE_ID_DMI_ENC		0x5fab
 
-#define USB_VENDOR_ID_DRAGONRISE	0x0079
-#define USB_DEVICE_ID_DRAGONRISE_WIIU	0x1800
+#define USB_VENDOR_ID_DRAGONRISE		0x0079
+#define USB_DEVICE_ID_DRAGONRISE_WIIU		0x1800
+#define USB_DEVICE_ID_DRAGONRISE_PS3		0x1801
+#define USB_DEVICE_ID_DRAGONRISE_GAMECUBE	0x1843
 
 #define USB_VENDOR_ID_DWAV		0x0eef
 #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER	0x0001
@@ -718,8 +721,9 @@
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3    0x07dc
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2  0x07e2
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP 0x07dd
+#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4 0x07e4
+#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2 0x07e8
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP 0x07e9
-#define USB_DEVICE_ID_MS_TYPE_COVER_3    0x07de
 #define USB_DEVICE_ID_MS_POWER_COVER     0x07da
 
 #define USB_VENDOR_ID_MOJO		0x8282
@@ -903,6 +907,8 @@
 #define USB_DEVICE_ID_SONY_PS3_BDREMOTE		0x0306
 #define USB_DEVICE_ID_SONY_PS3_CONTROLLER	0x0268
 #define USB_DEVICE_ID_SONY_PS4_CONTROLLER	0x05c4
+#define USB_DEVICE_ID_SONY_PS4_CONTROLLER_2	0x09cc
+#define USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE	0x0ba0
 #define USB_DEVICE_ID_SONY_MOTION_CONTROLLER	0x03d5
 #define USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER	0x042f
 #define USB_DEVICE_ID_SONY_BUZZ_CONTROLLER		0x0002
@@ -959,6 +965,9 @@
 #define USB_VENDOR_ID_THINGM		0x27b8
 #define USB_DEVICE_ID_BLINK1		0x01ed
 
+#define USB_VENDOR_ID_THQ		0x20d6
+#define USB_DEVICE_ID_THQ_PS3_UDRAW	0xcb17
+
 #define USB_VENDOR_ID_THRUSTMASTER	0x044f
 
 #define USB_VENDOR_ID_TIVO		0x150a
@@ -1034,6 +1043,10 @@
 #define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH	0x0500
 #define USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET	0x0502
 
+#define	USB_VENDOR_ID_WEIDA		0x2575
+#define	USB_DEVICE_ID_WEIDA_8752	0xC300
+#define	USB_DEVICE_ID_WEIDA_8755	0xC301
+
 #define USB_VENDOR_ID_WISEGROUP		0x0925
 #define USB_DEVICE_ID_SMARTJOY_PLUS	0x0005
 #define USB_DEVICE_ID_SUPER_JOY_BOX_3	0x8888

drivers/hid/hid-input.c

@@ -253,6 +253,7 @@ __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 	case ABS_RX:
 	case ABS_RY:
 	case ABS_RZ:
+	case ABS_WHEEL:
 	case ABS_TILT_X:
 	case ABS_TILT_Y:
 		if (field->unit == 0x14) {		/* If degrees */
@@ -1468,6 +1469,31 @@ static void hidinput_cleanup_hidinput(struct hid_device *hid,
 	kfree(hidinput);
 }
 
+static struct hid_input *hidinput_match(struct hid_report *report)
+{
+	struct hid_device *hid = report->device;
+	struct hid_input *hidinput;
+
+	list_for_each_entry(hidinput, &hid->inputs, list) {
+		if (hidinput->report &&
+		    hidinput->report->id == report->id)
+			return hidinput;
+	}
+
+	return NULL;
+}
+
+static inline void hidinput_configure_usages(struct hid_input *hidinput,
+					     struct hid_report *report)
+{
+	int i, j;
+
+	for (i = 0; i < report->maxfield; i++)
+		for (j = 0; j < report->field[i]->maxusage; j++)
+			hidinput_configure_usage(hidinput, report->field[i],
+						 report->field[i]->usage + j);
+}
+
 /*
  * Register the input device; print a message.
  * Configure the input layer interface
@@ -1478,8 +1504,8 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
 {
 	struct hid_driver *drv = hid->driver;
 	struct hid_report *report;
-	struct hid_input *hidinput = NULL;
-	int i, j, k;
+	struct hid_input *next, *hidinput = NULL;
+	int i, k;
 
 	INIT_LIST_HEAD(&hid->inputs);
 	INIT_WORK(&hid->led_work, hidinput_led_worker);
@@ -1509,43 +1535,40 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
 			if (!report->maxfield)
 				continue;
 
+			/*
+			 * Find the previous hidinput report attached
+			 * to this report id.
+			 */
+			if (hid->quirks & HID_QUIRK_MULTI_INPUT)
+				hidinput = hidinput_match(report);
+
 			if (!hidinput) {
 				hidinput = hidinput_allocate(hid);
 				if (!hidinput)
 					goto out_unwind;
 			}
 
-			for (i = 0; i < report->maxfield; i++)
-				for (j = 0; j < report->field[i]->maxusage; j++)
-					hidinput_configure_usage(hidinput, report->field[i],
-								 report->field[i]->usage + j);
-
-			if ((hid->quirks & HID_QUIRK_NO_EMPTY_INPUT) &&
-			    !hidinput_has_been_populated(hidinput))
-				continue;
+			hidinput_configure_usages(hidinput, report);
 
-			if (hid->quirks & HID_QUIRK_MULTI_INPUT) {
-				/* This will leave hidinput NULL, so that it
-				 * allocates another one if we have more inputs on
-				 * the same interface. Some devices (e.g. Happ's
-				 * UGCI) cram a lot of unrelated inputs into the
-				 * same interface. */
+			if (hid->quirks & HID_QUIRK_MULTI_INPUT)
 				hidinput->report = report;
-				if (drv->input_configured &&
-				    drv->input_configured(hid, hidinput))
-					goto out_cleanup;
-				if (input_register_device(hidinput->input))
-					goto out_cleanup;
-				hidinput = NULL;
-			}
 		}
 	}
 
-	if (hidinput && (hid->quirks & HID_QUIRK_NO_EMPTY_INPUT) &&
-	    !hidinput_has_been_populated(hidinput)) {
-		/* no need to register an input device not populated */
-		hidinput_cleanup_hidinput(hid, hidinput);
-		hidinput = NULL;
+	list_for_each_entry_safe(hidinput, next, &hid->inputs, list) {
+		if ((hid->quirks & HID_QUIRK_NO_EMPTY_INPUT) &&
+		    !hidinput_has_been_populated(hidinput)) {
+			/* no need to register an input device not populated */
+			hidinput_cleanup_hidinput(hid, hidinput);
+			continue;
+		}
+
+		if (drv->input_configured &&
+		    drv->input_configured(hid, hidinput))
+			goto out_unwind;
+		if (input_register_device(hidinput->input))
+			goto out_unwind;
+		hidinput->registered = true;
 	}
 
 	if (list_empty(&hid->inputs)) {
@@ -1553,20 +1576,8 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
 		goto out_unwind;
 	}
 
-	if (hidinput) {
-		if (drv->input_configured &&
-		    drv->input_configured(hid, hidinput))
-			goto out_cleanup;
-		if (input_register_device(hidinput->input))
-			goto out_cleanup;
-	}
-
 	return 0;
 
-out_cleanup:
-	list_del(&hidinput->list);
-	input_free_device(hidinput->input);
-	kfree(hidinput);
 out_unwind:
 	/* unwind the ones we already registered */
 	hidinput_disconnect(hid);
@@ -1583,7 +1594,10 @@ void hidinput_disconnect(struct hid_device *hid)
 
 	list_for_each_entry_safe(hidinput, next, &hid->inputs, list) {
 		list_del(&hidinput->list);
-		input_unregister_device(hidinput->input);
+		if (hidinput->registered)
+			input_unregister_device(hidinput->input);
+		else
+			input_free_device(hidinput->input);
 		kfree(hidinput);
 	}
 

drivers/hid/hid-mf.c

+/*
+ * Force feedback support for Mayflash game controller adapters.
+ *
+ * These devices are manufactured by Mayflash but identify themselves
+ * using the vendor ID of DragonRise Inc.
+ *
+ * Tested with:
+ * 0079:1801 "DragonRise Inc. Mayflash PS3 Game Controller Adapter"
+ *
+ * The following adapters probably work too, but need to be tested:
+ * 0079:1800 "DragonRise Inc. Mayflash WIIU Game Controller Adapter"
+ * 0079:1843 "DragonRise Inc. Mayflash GameCube Game Controller Adapter"
+ *
+ * Copyright (c) 2016 Marcel Hasler <mahasler@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+struct mf_device {
+	struct hid_report *report;
+};
+
+static int mf_play(struct input_dev *dev, void *data, struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct mf_device *mf = data;
+	int strong, weak;
+
+	strong = effect->u.rumble.strong_magnitude;
+	weak = effect->u.rumble.weak_magnitude;
+
+	dbg_hid("Called with 0x%04x 0x%04x.\n", strong, weak);
+
+	strong = strong * 0xff / 0xffff;
+	weak = weak * 0xff / 0xffff;
+
+	dbg_hid("Running with 0x%02x 0x%02x.\n", strong, weak);
+
+	mf->report->field[0]->value[0] = weak;
+	mf->report->field[0]->value[1] = strong;
+	hid_hw_request(hid, mf->report, HID_REQ_SET_REPORT);
+
+	return 0;
+}
+
+static int mf_init(struct hid_device *hid)
+{
+	struct mf_device *mf;
+
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+
+	struct list_head *report_ptr;
+	struct hid_report *report;
+
+	struct list_head *input_ptr = &hid->inputs;
+	struct hid_input *input;
+
+	struct input_dev *dev;
+
+	int error;
+
+	/* Setup each of the four inputs */
+	list_for_each(report_ptr, report_list) {
+		report = list_entry(report_ptr, struct hid_report, list);
+
+		if (report->maxfield < 1 || report->field[0]->report_count < 2) {
+			hid_err(hid, "Invalid report, this should never happen!\n");
+			return -ENODEV;
+		}
+
+		if (list_is_last(input_ptr, &hid->inputs)) {
+			hid_err(hid, "Missing input, this should never happen!\n");
+			return -ENODEV;
+		}
+
+		input_ptr = input_ptr->next;
+		input = list_entry(input_ptr, struct hid_input, list);
+
+		mf = kzalloc(sizeof(struct mf_device), GFP_KERNEL);
+		if (!mf)
+			return -ENOMEM;
+
+		dev = input->input;
+		set_bit(FF_RUMBLE, dev->ffbit);
+
+		error = input_ff_create_memless(dev, mf, mf_play);
+		if (error) {
+			kfree(mf);
+			return error;
+		}
+
+		mf->report = report;
+		mf->report->field[0]->value[0] = 0x00;
+		mf->report->field[0]->value[1] = 0x00;
+		hid_hw_request(hid, mf->report, HID_REQ_SET_REPORT);
+	}
+
+	hid_info(hid, "Force feedback for HJZ Mayflash game controller "
+		      "adapters by Marcel Hasler <mahasler@gmail.com>\n");
+
+	return 0;
+}
+
+static int mf_probe(struct hid_device *hid, const struct hid_device_id *id)
+{
+	int error;
+
+	dev_dbg(&hid->dev, "Mayflash HID hardware probe...\n");
+
+	/* Split device into four inputs */
+	hid->quirks |= HID_QUIRK_MULTI_INPUT;
+
+	error = hid_parse(hid);
+	if (error) {
+		hid_err(hid, "HID parse failed.\n");
+		return error;
+	}
+
+	error = hid_hw_start(hid, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (error) {
+		hid_err(hid, "HID hw start failed\n");
+		return error;
+	}
+
+	error = mf_init(hid);
+	if (error) {
+		hid_err(hid, "Force feedback init failed.\n");
+		hid_hw_stop(hid);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct hid_device_id mf_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3),  },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, mf_devices);
+
+static struct hid_driver mf_driver = {
+	.name = "hid_mf",
+	.id_table = mf_devices,
+	.probe = mf_probe,
+};
+module_hid_driver(mf_driver);
+
+MODULE_LICENSE("GPL");

drivers/hid/hid-microsoft.c

@@ -280,9 +280,11 @@ static const struct hid_device_id ms_devices[] = {
 		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP),
 		.driver_data = MS_HIDINPUT },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP),
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4),
+		.driver_data = MS_HIDINPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2),
 		.driver_data = MS_HIDINPUT },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3),
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP),
 		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER),
 		.driver_data = MS_HIDINPUT },

drivers/hid/hid-multitouch.c

@@ -108,6 +108,7 @@ struct mt_device {
 	int cc_value_index;	/* contact count value index in the field */
 	unsigned last_slot_field;	/* the last field of a slot */
 	unsigned mt_report_id;	/* the report ID of the multitouch device */
+	unsigned long initial_quirks;	/* initial quirks state */
 	__s16 inputmode;	/* InputMode HID feature, -1 if non-existent */
 	__s16 inputmode_index;	/* InputMode HID feature index in the report */
 	__s16 maxcontact_report_id;	/* Maximum Contact Number HID feature,
@@ -318,13 +319,10 @@ static void mt_get_feature(struct hid_device *hdev, struct hid_report *report)
 	u8 *buf;
 
 	/*
-	 * Only fetch the feature report if initial reports are not already
-	 * been retrieved. Currently this is only done for Windows 8 touch
-	 * devices.
+	 * Do not fetch the feature report if the device has been explicitly
+	 * marked as non-capable.
 	 */
-	if (!(hdev->quirks & HID_QUIRK_NO_INIT_REPORTS))
-		return;
-	if (td->mtclass.name != MT_CLS_WIN_8)
+	if (td->initial_quirks & HID_QUIRK_NO_INIT_REPORTS)
 		return;
 
 	buf = hid_alloc_report_buf(report, GFP_KERNEL);
@@ -567,6 +565,14 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 
 	case HID_UP_BUTTON:
 		code = BTN_MOUSE + ((usage->hid - 1) & HID_USAGE);
+		/*
+		 * MS PTP spec says that external buttons left and right have
+		 * usages 2 and 3.
+		 */
+		if (cls->name == MT_CLS_WIN_8 &&
+		    field->application == HID_DG_TOUCHPAD &&
+		    (usage->hid & HID_USAGE) > 1)
+			code--;
 		hid_map_usage(hi, usage, bit, max, EV_KEY, code);
 		input_set_capability(hi->input, EV_KEY, code);
 		return 1;
@@ -842,7 +848,9 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 	if (!td->mtclass.export_all_inputs &&
 	    field->application != HID_DG_TOUCHSCREEN &&
 	    field->application != HID_DG_PEN &&
-	    field->application != HID_DG_TOUCHPAD)
+	    field->application != HID_DG_TOUCHPAD &&
+	    field->application != HID_GD_KEYBOARD &&
+	    field->application != HID_CP_CONSUMER_CONTROL)
 		return -1;
 
 	/*
@@ -1083,36 +1091,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		}
 	}
 
-	/* This allows the driver to correctly support devices
-	 * that emit events over several HID messages.
-	 */
-	hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
-
-	/*
-	 * This allows the driver to handle different input sensors
-	 * that emits events through different reports on the same HID
-	 * device.
-	 */
-	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
-	hdev->quirks |= HID_QUIRK_NO_EMPTY_INPUT;
-
-	/*
-	 * Handle special quirks for Windows 8 certified devices.
-	 */
-	if (id->group == HID_GROUP_MULTITOUCH_WIN_8)
-		/*
-		 * Some multitouch screens do not like to be polled for input
-		 * reports. Fortunately, the Win8 spec says that all touches
-		 * should be sent during each report, making the initialization
-		 * of input reports unnecessary.
-		 *
-		 * In addition some touchpads do not behave well if we read
-		 * all feature reports from them. Instead we prevent
-		 * initial report fetching and then selectively fetch each
-		 * report we are interested in.
-		 */
-		hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
-
 	td = devm_kzalloc(&hdev->dev, sizeof(struct mt_device), GFP_KERNEL);
 	if (!td) {
 		dev_err(&hdev->dev, "cannot allocate multitouch data\n");
@@ -1136,6 +1114,39 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID)
 		td->serial_maybe = true;
 
+	/*
+	 * Store the initial quirk state
+	 */
+	td->initial_quirks = hdev->quirks;
+
+	/* This allows the driver to correctly support devices
+	 * that emit events over several HID messages.
+	 */
+	hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
+
+	/*
+	 * This allows the driver to handle different input sensors
+	 * that emits events through different reports on the same HID
+	 * device.
+	 */
+	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
+	hdev->quirks |= HID_QUIRK_NO_EMPTY_INPUT;
+
+	/*
+	 * Some multitouch screens do not like to be polled for input
+	 * reports. Fortunately, the Win8 spec says that all touches
+	 * should be sent during each report, making the initialization
+	 * of input reports unnecessary. For Win7 devices, well, let's hope
+	 * they will still be happy (this is only be a problem if a touch
+	 * was already there while probing the device).
+	 *
+	 * In addition some touchpads do not behave well if we read
+	 * all feature reports from them. Instead we prevent
+	 * initial report fetching and then selectively fetch each
+	 * report we are interested in.
+	 */
+	hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
+
 	ret = hid_parse(hdev);
 	if (ret != 0)
 		return ret;
@@ -1204,8 +1215,11 @@ static int mt_resume(struct hid_device *hdev)
 
 static void mt_remove(struct hid_device *hdev)
 {
+	struct mt_device *td = hid_get_drvdata(hdev);
+
 	sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group);
 	hid_hw_stop(hdev);
+	hdev->quirks = td->initial_quirks;
 }
 
 /*

drivers/hid/hid-sensor-hub.c

@@ -795,6 +795,12 @@ static const struct hid_device_id sensor_hub_devices[] = {
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_MICROSOFT,
 			USB_DEVICE_ID_MS_TYPE_COVER_2),
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
+	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_MICROSOFT,
+			0x07bd), /* Microsoft Surface 3 */
+			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
+	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_MICROCHIP,
+			0x0f01), /* MM7150 */
+			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_STM_0,
 			USB_DEVICE_ID_STM_HID_SENSOR),
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},

drivers/hid/i2c-hid/i2c-hid.c

@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
+#include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pm.h>
@@ -37,10 +38,15 @@
 #include <linux/mutex.h>
 #include <linux/acpi.h>
 #include <linux/of.h>
-#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/i2c/i2c-hid.h>
 
+#include "../hid-ids.h"
+
+/* quirks to control the device */
+#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV	BIT(0)
+
 /* flags */
 #define I2C_HID_STARTED		0
 #define I2C_HID_RESET_PENDING	1
@@ -143,10 +149,9 @@ struct i2c_hid {
 	char			*argsbuf;	/* Command arguments buffer */
 
 	unsigned long		flags;		/* device flags */
+	unsigned long		quirks;		/* Various quirks */
 
 	wait_queue_head_t	wait;		/* For waiting the interrupt */
-	struct gpio_desc	*desc;
-	int			irq;
 
 	struct i2c_hid_platform_data pdata;
 
@@ -154,6 +159,39 @@ struct i2c_hid {
 	struct mutex		reset_lock;
 };
 
+static const struct i2c_hid_quirks {
+	__u16 idVendor;
+	__u16 idProduct;
+	__u32 quirks;
+} i2c_hid_quirks[] = {
+	{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8752,
+		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
+	{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8755,
+		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
+	{ 0, 0 }
+};
+
+/*
+ * i2c_hid_lookup_quirk: return any quirks associated with a I2C HID device
+ * @idVendor: the 16-bit vendor ID
+ * @idProduct: the 16-bit product ID
+ *
+ * Returns: a u32 quirks value.
+ */
+static u32 i2c_hid_lookup_quirk(const u16 idVendor, const u16 idProduct)
+{
+	u32 quirks = 0;
+	int n;
+
+	for (n = 0; i2c_hid_quirks[n].idVendor; n++)
+		if (i2c_hid_quirks[n].idVendor == idVendor &&
+		    (i2c_hid_quirks[n].idProduct == (__u16)HID_ANY_ID ||
+		     i2c_hid_quirks[n].idProduct == idProduct))
+			quirks = i2c_hid_quirks[n].quirks;
+
+	return quirks;
+}
+
 static int __i2c_hid_command(struct i2c_client *client,
 		const struct i2c_hid_cmd *command, u8 reportID,
 		u8 reportType, u8 *args, int args_len,
@@ -346,11 +384,27 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
 
 	i2c_hid_dbg(ihid, "%s\n", __func__);
 
+	/*
+	 * Some devices require to send a command to wakeup before power on.
+	 * The call will get a return value (EREMOTEIO) but device will be
+	 * triggered and activated. After that, it goes like a normal device.
+	 */
+	if (power_state == I2C_HID_PWR_ON &&
+	    ihid->quirks & I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV) {
+		ret = i2c_hid_command(client, &hid_set_power_cmd, NULL, 0);
+
+		/* Device was already activated */
+		if (!ret)
+			goto set_pwr_exit;
+	}
+
 	ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
 		0, NULL, 0, NULL, 0);
+
 	if (ret)
 		dev_err(&client->dev, "failed to change power setting.\n");
 
+set_pwr_exit:
 	return ret;
 }
 
@@ -716,9 +770,11 @@ static int i2c_hid_start(struct hid_device *hid)
 	i2c_hid_find_max_report(hid, HID_FEATURE_REPORT, &bufsize);
 
 	if (bufsize > ihid->bufsize) {
+		disable_irq(client->irq);
 		i2c_hid_free_buffers(ihid);
 
 		ret = i2c_hid_alloc_buffers(ihid, bufsize);
+		enable_irq(client->irq);
 
 		if (ret)
 			return ret;
@@ -806,18 +862,21 @@ static struct hid_ll_driver i2c_hid_ll_driver = {
 static int i2c_hid_init_irq(struct i2c_client *client)
 {
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
+	unsigned long irqflags = 0;
 	int ret;
 
-	dev_dbg(&client->dev, "Requesting IRQ: %d\n", ihid->irq);
+	dev_dbg(&client->dev, "Requesting IRQ: %d\n", client->irq);
 
-	ret = request_threaded_irq(ihid->irq, NULL, i2c_hid_irq,
-			IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-			client->name, ihid);
+	if (!irq_get_trigger_type(client->irq))
+		irqflags = IRQF_TRIGGER_LOW;
+
+	ret = request_threaded_irq(client->irq, NULL, i2c_hid_irq,
+				   irqflags | IRQF_ONESHOT, client->name, ihid);
 	if (ret < 0) {
 		dev_warn(&client->dev,
 			"Could not register for %s interrupt, irq = %d,"
 			" ret = %d\n",
-			client->name, ihid->irq, ret);
+			client->name, client->irq, ret);
 
 		return ret;
 	}
@@ -864,14 +923,6 @@ static int i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid)
 }
 
 #ifdef CONFIG_ACPI
-
-/* Default GPIO mapping */
-static const struct acpi_gpio_params i2c_hid_irq_gpio = { 0, 0, true };
-static const struct acpi_gpio_mapping i2c_hid_acpi_gpios[] = {
-	{ "gpios", &i2c_hid_irq_gpio, 1 },
-	{ },
-};
-
 static int i2c_hid_acpi_pdata(struct i2c_client *client,
 		struct i2c_hid_platform_data *pdata)
 {
@@ -882,7 +933,6 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client,
 	union acpi_object *obj;
 	struct acpi_device *adev;
 	acpi_handle handle;
-	int ret;
 
 	handle = ACPI_HANDLE(&client->dev);
 	if (!handle || acpi_bus_get_device(handle, &adev))
@@ -898,9 +948,7 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client,
 	pdata->hid_descriptor_address = obj->integer.value;
 	ACPI_FREE(obj);
 
-	/* GPIOs are optional */
-	ret = acpi_dev_add_driver_gpios(adev, i2c_hid_acpi_gpios);
-	return ret < 0 && ret != -ENXIO ? ret : 0;
+	return 0;
 }
 
 static const struct acpi_device_id i2c_hid_acpi_match[] = {
@@ -964,6 +1012,19 @@ static int i2c_hid_probe(struct i2c_client *client,
 
 	dbg_hid("HID probe called for i2c 0x%02x\n", client->addr);
 
+	if (!client->irq) {
+		dev_err(&client->dev,
+			"HID over i2c has not been provided an Int IRQ\n");
+		return -EINVAL;
+	}
+
+	if (client->irq < 0) {
+		if (client->irq != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"HID over i2c doesn't have a valid IRQ\n");
+		return client->irq;
+	}
+
 	ihid = kzalloc(sizeof(struct i2c_hid), GFP_KERNEL);
 	if (!ihid)
 		return -ENOMEM;
@@ -983,23 +1044,6 @@ static int i2c_hid_probe(struct i2c_client *client,
 		ihid->pdata = *platform_data;
 	}
 
-	if (client->irq > 0) {
-		ihid->irq = client->irq;
-	} else if (ACPI_COMPANION(&client->dev)) {
-		ihid->desc = gpiod_get(&client->dev, NULL, GPIOD_IN);
-		if (IS_ERR(ihid->desc)) {
-			dev_err(&client->dev, "Failed to get GPIO interrupt\n");
-			return PTR_ERR(ihid->desc);
-		}
-
-		ihid->irq = gpiod_to_irq(ihid->desc);
-		if (ihid->irq < 0) {
-			gpiod_put(ihid->desc);
-			dev_err(&client->dev, "Failed to convert GPIO to IRQ\n");
-			return ihid->irq;
-		}
-	}
-
 	i2c_set_clientdata(client, ihid);
 
 	ihid->client = client;
@@ -1050,6 +1094,8 @@ static int i2c_hid_probe(struct i2c_client *client,
 		 client->name, hid->vendor, hid->product);
 	strlcpy(hid->phys, dev_name(&client->dev), sizeof(hid->phys));
 
+	ihid->quirks = i2c_hid_lookup_quirk(hid->vendor, hid->product);
+
 	ret = hid_add_device(hid);
 	if (ret) {
 		if (ret != -ENODEV)
@@ -1064,16 +1110,13 @@ static int i2c_hid_probe(struct i2c_client *client,
 	hid_destroy_device(hid);
 
 err_irq:
-	free_irq(ihid->irq, ihid);
+	free_irq(client->irq, ihid);
 
 err_pm:
 	pm_runtime_put_noidle(&client->dev);
 	pm_runtime_disable(&client->dev);
 
 err:
-	if (ihid->desc)
-		gpiod_put(ihid->desc);
-
 	i2c_hid_free_buffers(ihid);
 	kfree(ihid);
 	return ret;
@@ -1092,18 +1135,13 @@ static int i2c_hid_remove(struct i2c_client *client)
 	hid = ihid->hid;
 	hid_destroy_device(hid);
 
-	free_irq(ihid->irq, ihid);
+	free_irq(client->irq, ihid);
 
 	if (ihid->bufsize)
 		i2c_hid_free_buffers(ihid);
 
-	if (ihid->desc)
-		gpiod_put(ihid->desc);
-
 	kfree(ihid);
 
-	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&client->dev));
-
 	return 0;
 }
 
@@ -1142,11 +1180,11 @@ static int i2c_hid_suspend(struct device *dev)
 		/* Save some power */
 		i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
 
-		disable_irq(ihid->irq);
+		disable_irq(client->irq);
 	}
 
 	if (device_may_wakeup(&client->dev)) {
-		wake_status = enable_irq_wake(ihid->irq);
+		wake_status = enable_irq_wake(client->irq);
 		if (!wake_status)
 			ihid->irq_wake_enabled = true;
 		else
@@ -1166,7 +1204,7 @@ static int i2c_hid_resume(struct device *dev)
 	int wake_status;
 
 	if (device_may_wakeup(&client->dev) && ihid->irq_wake_enabled) {
-		wake_status = disable_irq_wake(ihid->irq);
+		wake_status = disable_irq_wake(client->irq);
 		if (!wake_status)
 			ihid->irq_wake_enabled = false;
 		else
@@ -1179,7 +1217,7 @@ static int i2c_hid_resume(struct device *dev)
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
-	enable_irq(ihid->irq);
+	enable_irq(client->irq);
 	ret = i2c_hid_hwreset(client);
 	if (ret)
 		return ret;
@@ -1197,19 +1235,17 @@ static int i2c_hid_resume(struct device *dev)
 static int i2c_hid_runtime_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct i2c_hid *ihid = i2c_get_clientdata(client);
 
 	i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
-	disable_irq(ihid->irq);
+	disable_irq(client->irq);
 	return 0;
 }
 
 static int i2c_hid_runtime_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct i2c_hid *ihid = i2c_get_clientdata(client);
 
-	enable_irq(ihid->irq);
+	enable_irq(client->irq);
 	i2c_hid_set_power(client, I2C_HID_PWR_ON);
 	return 0;
 }

drivers/hid/intel-ish-hid/ipc/ipc.c

@@ -19,7 +19,6 @@
 #include <linux/jiffies.h>
 #include "client.h"
 #include "hw-ish.h"
-#include "utils.h"
 #include "hbm.h"
 
 /* For FW reset flow */
@@ -310,6 +309,7 @@ static int write_ipc_from_queue(struct ishtp_device *dev)
 						((uint32_t)tv_utc.tv_usec);
 		ts_format.ts1_source = HOST_SYSTEM_TIME_USEC;
 		ts_format.ts2_source = HOST_UTC_TIME_USEC;
+		ts_format.reserved = 0;
 
 		time_update.primary_host_time = usec_system;
 		time_update.secondary_host_time = usec_utc;
@@ -427,6 +427,59 @@ static int ipc_send_mng_msg(struct ishtp_device *dev, uint32_t msg_code,
 		sizeof(uint32_t) + size);
 }
 
+#define WAIT_FOR_FW_RDY			0x1
+#define WAIT_FOR_INPUT_RDY		0x2
+
+/**
+ * timed_wait_for_timeout() - wait special event with timeout
+ * @dev: ISHTP device pointer
+ * @condition: indicate the condition for waiting
+ * @timeinc: time slice for every wait cycle, in ms
+ * @timeout: time in ms for timeout
+ *
+ * This function will check special event to be ready in a loop, the loop
+ * period is specificd in timeinc. Wait timeout will causes failure.
+ *
+ * Return: 0 for success else failure code
+ */
+static int timed_wait_for_timeout(struct ishtp_device *dev, int condition,
+				unsigned int timeinc, unsigned int timeout)
+{
+	bool complete = false;
+	int ret;
+
+	do {
+		if (condition == WAIT_FOR_FW_RDY) {
+			complete = ishtp_fw_is_ready(dev);
+		} else if (condition == WAIT_FOR_INPUT_RDY) {
+			complete = ish_is_input_ready(dev);
+		} else {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (!complete) {
+			unsigned long left_time;
+
+			left_time = msleep_interruptible(timeinc);
+			timeout -= (timeinc - left_time);
+		}
+	} while (!complete && timeout > 0);
+
+	if (complete)
+		ret = 0;
+	else
+		ret = -EBUSY;
+
+out:
+	return ret;
+}
+
+#define TIME_SLICE_FOR_FW_RDY_MS		100
+#define TIME_SLICE_FOR_INPUT_RDY_MS		100
+#define TIMEOUT_FOR_FW_RDY_MS			2000
+#define TIMEOUT_FOR_INPUT_RDY_MS		2000
+
 /**
  * ish_fw_reset_handler() - FW reset handler
  * @dev: ishtp device pointer
@@ -456,8 +509,8 @@ static int ish_fw_reset_handler(struct ishtp_device *dev)
 	ishtp_reset_handler(dev);
 
 	if (!ish_is_input_ready(dev))
-		timed_wait_for_timeout(WAIT_FOR_SEND_SLICE,
-			ish_is_input_ready(dev), (2 * HZ));
+		timed_wait_for_timeout(dev, WAIT_FOR_INPUT_RDY,
+			TIME_SLICE_FOR_INPUT_RDY_MS, TIMEOUT_FOR_INPUT_RDY_MS);
 
 	/* ISH FW is dead */
 	if (!ish_is_input_ready(dev))
@@ -472,8 +525,8 @@ static int ish_fw_reset_handler(struct ishtp_device *dev)
 			 sizeof(uint32_t));
 
 	/* Wait for ISH FW'es ILUP and ISHTP_READY */
-	timed_wait_for_timeout(WAIT_FOR_SEND_SLICE, ishtp_fw_is_ready(dev),
-		(2 * HZ));
+	timed_wait_for_timeout(dev, WAIT_FOR_FW_RDY,
+			TIME_SLICE_FOR_FW_RDY_MS, TIMEOUT_FOR_FW_RDY_MS);
 	if (!ishtp_fw_is_ready(dev)) {
 		/* ISH FW is dead */
 		uint32_t	ish_status;
@@ -487,6 +540,8 @@ static int ish_fw_reset_handler(struct ishtp_device *dev)
 	return	0;
 }
 
+#define TIMEOUT_FOR_HW_RDY_MS			300
+
 /**
  * ish_fw_reset_work_fn() - FW reset worker function
  * @unused: not used
@@ -500,7 +555,7 @@ static void fw_reset_work_fn(struct work_struct *unused)
 	rv = ish_fw_reset_handler(ishtp_dev);
 	if (!rv) {
 		/* ISH is ILUP & ISHTP-ready. Restart ISHTP */
-		schedule_timeout(HZ / 3);
+		msleep_interruptible(TIMEOUT_FOR_HW_RDY_MS);
 		ishtp_dev->recvd_hw_ready = 1;
 		wake_up_interruptible(&ishtp_dev->wait_hw_ready);
 

drivers/hid/intel-ish-hid/ipc/utils.h

-/*
- * Utility macros of ISH
- *
- * Copyright (c) 2014-2016, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- */
-#ifndef UTILS__H
-#define UTILS__H
-
-#define	WAIT_FOR_SEND_SLICE	(HZ / 10)
-#define	WAIT_FOR_CONNECT_SLICE	(HZ / 10)
-
-/*
- * Waits for specified event when a thread that triggers event can't signal
- * Also, waits *at_least* `timeinc` after condition is satisfied
- */
-#define	timed_wait_for(timeinc, condition)			\
-	do {							\
-		int completed = 0;				\
-		do {						\
-			unsigned long	j;			\
-			int	done = 0;			\
-								\
-			completed = (condition);		\
-			for (j = jiffies, done = 0; !done; ) {	\
-				schedule_timeout(timeinc);	\
-				if (time_is_before_eq_jiffies(j + timeinc)) \
-					done = 1;		\
-			}					\
-		} while (!(completed));				\
-	} while (0)
-
-
-/*
- * Waits for specified event when a thread that triggers event
- * can't signal with timeout (use whenever we may hang)
- */
-#define	timed_wait_for_timeout(timeinc, condition, timeout)	\
-	do {							\
-		int	t = timeout;				\
-		do {						\
-			unsigned long	j;			\
-			int	done = 0;			\
-								\
-			for (j = jiffies, done = 0; !done; ) {	\
-				schedule_timeout(timeinc);	\
-				if (time_is_before_eq_jiffies(j + timeinc)) \
-					done = 1;		\
-			} \
-			t -= timeinc;				\
-			if (t <= 0)				\
-				break;				\
-		} while (!(condition));				\
-	} while (0)
-
-#endif /* UTILS__H */

drivers/hid/intel-ish-hid/ishtp/bus.c

@@ -585,14 +585,7 @@ int ishtp_bus_new_client(struct ishtp_device *dev)
 	 */
 	i = dev->fw_client_presentation_num - 1;
 	device_uuid = dev->fw_clients[i].props.protocol_name;
-	dev_name = kasprintf(GFP_KERNEL,
-		"{%02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X}",
-		device_uuid.b[3], device_uuid.b[2], device_uuid.b[1],
-		device_uuid.b[0], device_uuid.b[5], device_uuid.b[4],
-		device_uuid.b[7], device_uuid.b[6], device_uuid.b[8],
-		device_uuid.b[9], device_uuid.b[10], device_uuid.b[11],
-		device_uuid.b[12], device_uuid.b[13], device_uuid.b[14],
-		device_uuid.b[15]);
+	dev_name = kasprintf(GFP_KERNEL, "{%pUL}", device_uuid.b);
 	if (!dev_name)
 		return	-ENOMEM;
 

drivers/hid/intel-ish-hid/ishtp/hbm.c

@@ -378,11 +378,10 @@ static void ishtp_hbm_cl_disconnect_res(struct ishtp_device *dev,
 	list_for_each_entry(cl, &dev->cl_list, link) {
 		if (!rs->status && ishtp_hbm_cl_addr_equal(cl, rs)) {
 			cl->state = ISHTP_CL_DISCONNECTED;
+			wake_up_interruptible(&cl->wait_ctrl_res);
 			break;
 		}
 	}
-	if (cl)
-		wake_up_interruptible(&cl->wait_ctrl_res);
 	spin_unlock_irqrestore(&dev->cl_list_lock, flags);
 }
 
@@ -431,11 +430,10 @@ static void ishtp_hbm_cl_connect_res(struct ishtp_device *dev,
 				cl->state = ISHTP_CL_DISCONNECTED;
 				cl->status = -ENODEV;
 			}
+			wake_up_interruptible(&cl->wait_ctrl_res);
 			break;
 		}
 	}
-	if (cl)
-		wake_up_interruptible(&cl->wait_ctrl_res);
 	spin_unlock_irqrestore(&dev->cl_list_lock, flags);
 }
 

drivers/hid/usbhid/hid-core.c

@@ -1459,7 +1459,7 @@ static int hid_post_reset(struct usb_interface *intf)
 	rdesc = kmalloc(hid->dev_rsize, GFP_KERNEL);
 	if (!rdesc) {
 		dbg_hid("couldn't allocate rdesc memory (post_reset)\n");
-		return 1;
+		return -ENOMEM;
 	}
 	status = hid_get_class_descriptor(dev,
 				interface->desc.bInterfaceNumber,
@@ -1467,13 +1467,13 @@ static int hid_post_reset(struct usb_interface *intf)
 	if (status < 0) {
 		dbg_hid("reading report descriptor failed (post_reset)\n");
 		kfree(rdesc);
-		return 1;
+		return status;
 	}
 	status = memcmp(rdesc, hid->dev_rdesc, hid->dev_rsize);
 	kfree(rdesc);
 	if (status != 0) {
 		dbg_hid("report descriptor changed\n");
-		return 1;
+		return -EPERM;
 	}
 
 	/* No need to do another reset or clear a halted endpoint */

drivers/hid/usbhid/hid-quirks.c

@@ -82,6 +82,8 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVE_SB_OMNI_SURROUND_51, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_ELAN, HID_ANY_ID, HID_QUIRK_ALWAYS_POLL },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
@@ -101,8 +103,9 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS },

drivers/hid/wacom.h

@@ -210,7 +210,7 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 				       struct wacom_wac *wacom_wac);
 void wacom_wac_usage_mapping(struct hid_device *hdev,
 		struct hid_field *field, struct hid_usage *usage);
-int wacom_wac_event(struct hid_device *hdev, struct hid_field *field,
+void wacom_wac_event(struct hid_device *hdev, struct hid_field *field,
 		struct hid_usage *usage, __s32 value);
 void wacom_wac_report(struct hid_device *hdev, struct hid_report *report);
 void wacom_battery_work(struct work_struct *work);

drivers/hid/wacom_sys.c

@@ -122,6 +122,7 @@ static void wacom_feature_mapping(struct hid_device *hdev,
 	struct hid_data *hid_data = &wacom->wacom_wac.hid_data;
 	u8 *data;
 	int ret;
+	int n;
 
 	switch (usage->hid) {
 	case HID_DG_CONTACTMAX:
@@ -159,22 +160,48 @@ static void wacom_feature_mapping(struct hid_device *hdev,
 
 	case HID_UP_DIGITIZER:
 		if (field->report->id == 0x0B &&
-		    (field->application == WACOM_G9_DIGITIZER ||
-		     field->application == WACOM_G11_DIGITIZER)) {
+		    (field->application == WACOM_HID_G9_PEN ||
+		     field->application == WACOM_HID_G11_PEN)) {
 			wacom->wacom_wac.mode_report = field->report->id;
 			wacom->wacom_wac.mode_value = 0;
 		}
 		break;
 
-	case WACOM_G9_PAGE:
-	case WACOM_G11_PAGE:
+	case WACOM_HID_WD_DATAMODE:
+		wacom->wacom_wac.mode_report = field->report->id;
+		wacom->wacom_wac.mode_value = 2;
+		break;
+
+	case WACOM_HID_UP_G9:
+	case WACOM_HID_UP_G11:
 		if (field->report->id == 0x03 &&
-		    (field->application == WACOM_G9_TOUCHSCREEN ||
-		     field->application == WACOM_G11_TOUCHSCREEN)) {
+		    (field->application == WACOM_HID_G9_TOUCHSCREEN ||
+		     field->application == WACOM_HID_G11_TOUCHSCREEN)) {
 			wacom->wacom_wac.mode_report = field->report->id;
 			wacom->wacom_wac.mode_value = 0;
 		}
 		break;
+	case WACOM_HID_WD_OFFSETLEFT:
+	case WACOM_HID_WD_OFFSETTOP:
+	case WACOM_HID_WD_OFFSETRIGHT:
+	case WACOM_HID_WD_OFFSETBOTTOM:
+		/* read manually */
+		n = hid_report_len(field->report);
+		data = hid_alloc_report_buf(field->report, GFP_KERNEL);
+		if (!data)
+			break;
+		data[0] = field->report->id;
+		ret = wacom_get_report(hdev, HID_FEATURE_REPORT,
+					data, n, WAC_CMD_RETRIES);
+		if (ret == n) {
+			ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT,
+						   data, n, 0);
+		} else {
+			hid_warn(hdev, "%s: could not retrieve sensor offsets\n",
+				 __func__);
+		}
+		kfree(data);
+		break;
 	}
 }
 
@@ -240,6 +267,30 @@ static void wacom_usage_mapping(struct hid_device *hdev,
 			features->touch_max = 1;
 	}
 
+	/*
+	 * ISDv4 devices which predate HID's adoption of the
+	 * HID_DG_BARELSWITCH2 usage use 0x000D0000 in its
+	 * position instead. We can accurately detect if a
+	 * usage with that value should be HID_DG_BARRELSWITCH2
+	 * based on the surrounding usages, which have remained
+	 * constant across generations.
+	 */
+	if (features->type == HID_GENERIC &&
+	    usage->hid == 0x000D0000 &&
+	    field->application == HID_DG_PEN &&
+	    field->physical == HID_DG_STYLUS) {
+		int i = usage->usage_index;
+
+		if (i-4 >= 0 && i+1 < field->maxusage &&
+		    field->usage[i-4].hid == HID_DG_TIPSWITCH &&
+		    field->usage[i-3].hid == HID_DG_BARRELSWITCH &&
+		    field->usage[i-2].hid == HID_DG_ERASER &&
+		    field->usage[i-1].hid == HID_DG_INVERT &&
+		    field->usage[i+1].hid == HID_DG_INRANGE) {
+			usage->hid = HID_DG_BARRELSWITCH2;
+		}
+	}
+
 	switch (usage->hid) {
 	case HID_GD_X:
 		features->x_max = field->logical_maximum;
@@ -689,11 +740,6 @@ static int wacom_add_shared_data(struct hid_device *hdev)
 		return retval;
 	}
 
-	if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)
-		wacom_wac->shared->touch = hdev;
-	else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN)
-		wacom_wac->shared->pen = hdev;
-
 out:
 	mutex_unlock(&wacom_udev_list_lock);
 	return retval;
@@ -1916,6 +1962,19 @@ static void wacom_update_name(struct wacom *wacom, const char *suffix)
 				/* shift everything including the terminator */
 				memmove(gap, gap+1, strlen(gap));
 			}
+
+			/* strip off excessive prefixing */
+			if (strstr(name, "Wacom Co.,Ltd. Wacom ") == name) {
+				int n = strlen(name);
+				int x = strlen("Wacom Co.,Ltd. ");
+				memmove(name, name+x, n-x+1);
+			}
+			if (strstr(name, "Wacom Co., Ltd. Wacom ") == name) {
+				int n = strlen(name);
+				int x = strlen("Wacom Co., Ltd. ");
+				memmove(name, name+x, n-x+1);
+			}
+
 			/* get rid of trailing whitespace */
 			if (name[strlen(name)-1] == ' ')
 				name[strlen(name)-1] = '\0';
@@ -1977,6 +2036,10 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
 	if (error)
 		goto fail;
 
+	error = wacom_add_shared_data(hdev);
+	if (error)
+		goto fail;
+
 	/*
 	 * Bamboo Pad has a generic hid handling for the Pen, and we switch it
 	 * into debug mode for the touch part.
@@ -2017,9 +2080,10 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
 
 	wacom_update_name(wacom, wireless ? " (WL)" : "");
 
-	error = wacom_add_shared_data(hdev);
-	if (error)
-		goto fail;
+	if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)
+		wacom_wac->shared->touch = hdev;
+	else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN)
+		wacom_wac->shared->pen = hdev;
 
 	if (!(features->device_type & WACOM_DEVICETYPE_WL_MONITOR) &&
 	     (features->quirks & WACOM_QUIRK_BATTERY)) {

drivers/hid/wacom_wac.h

@@ -74,6 +74,7 @@
 
 /* device quirks */
 #define WACOM_QUIRK_BBTOUCH_LOWRES	0x0001
+#define WACOM_QUIRK_SENSE		0x0002
 #define WACOM_QUIRK_BATTERY		0x0008
 
 /* device types */
@@ -84,23 +85,66 @@
 #define WACOM_DEVICETYPE_WL_MONITOR     0x0008
 #define WACOM_DEVICETYPE_DIRECT         0x0010
 
-#define WACOM_VENDORDEFINED_PEN		0xff0d0001
-#define WACOM_G9_PAGE			0xff090000
-#define WACOM_G9_DIGITIZER		(WACOM_G9_PAGE | 0x02)
-#define WACOM_G9_TOUCHSCREEN		(WACOM_G9_PAGE | 0x11)
-#define WACOM_G11_PAGE			0xff110000
-#define WACOM_G11_DIGITIZER		(WACOM_G11_PAGE | 0x02)
-#define WACOM_G11_TOUCHSCREEN		(WACOM_G11_PAGE | 0x11)
+#define WACOM_HID_UP_WACOMDIGITIZER     0xff0d0000
+#define WACOM_HID_SP_PAD                0x00040000
+#define WACOM_HID_SP_BUTTON             0x00090000
+#define WACOM_HID_SP_DIGITIZER          0x000d0000
+#define WACOM_HID_SP_DIGITIZERINFO      0x00100000
+#define WACOM_HID_WD_DIGITIZER          (WACOM_HID_UP_WACOMDIGITIZER | 0x01)
+#define WACOM_HID_WD_SENSE              (WACOM_HID_UP_WACOMDIGITIZER | 0x36)
+#define WACOM_HID_WD_DIGITIZERFNKEYS    (WACOM_HID_UP_WACOMDIGITIZER | 0x39)
+#define WACOM_HID_WD_SERIALHI           (WACOM_HID_UP_WACOMDIGITIZER | 0x5c)
+#define WACOM_HID_WD_TOOLTYPE           (WACOM_HID_UP_WACOMDIGITIZER | 0x77)
+#define WACOM_HID_WD_DISTANCE           (WACOM_HID_UP_WACOMDIGITIZER | 0x0132)
+#define WACOM_HID_WD_TOUCHSTRIP         (WACOM_HID_UP_WACOMDIGITIZER | 0x0136)
+#define WACOM_HID_WD_TOUCHSTRIP2        (WACOM_HID_UP_WACOMDIGITIZER | 0x0137)
+#define WACOM_HID_WD_TOUCHRING          (WACOM_HID_UP_WACOMDIGITIZER | 0x0138)
+#define WACOM_HID_WD_TOUCHRINGSTATUS    (WACOM_HID_UP_WACOMDIGITIZER | 0x0139)
+#define WACOM_HID_WD_ACCELEROMETER_X    (WACOM_HID_UP_WACOMDIGITIZER | 0x0401)
+#define WACOM_HID_WD_ACCELEROMETER_Y    (WACOM_HID_UP_WACOMDIGITIZER | 0x0402)
+#define WACOM_HID_WD_ACCELEROMETER_Z    (WACOM_HID_UP_WACOMDIGITIZER | 0x0403)
+#define WACOM_HID_WD_BATTERY_CHARGING   (WACOM_HID_UP_WACOMDIGITIZER | 0x0404)
+#define WACOM_HID_WD_BATTERY_LEVEL      (WACOM_HID_UP_WACOMDIGITIZER | 0x043b)
+#define WACOM_HID_WD_EXPRESSKEY00       (WACOM_HID_UP_WACOMDIGITIZER | 0x0910)
+#define WACOM_HID_WD_EXPRESSKEYCAP00    (WACOM_HID_UP_WACOMDIGITIZER | 0x0950)
+#define WACOM_HID_WD_BUTTONHOME         (WACOM_HID_UP_WACOMDIGITIZER | 0x0990)
+#define WACOM_HID_WD_BUTTONUP           (WACOM_HID_UP_WACOMDIGITIZER | 0x0991)
+#define WACOM_HID_WD_BUTTONDOWN         (WACOM_HID_UP_WACOMDIGITIZER | 0x0992)
+#define WACOM_HID_WD_BUTTONLEFT         (WACOM_HID_UP_WACOMDIGITIZER | 0x0993)
+#define WACOM_HID_WD_BUTTONRIGHT        (WACOM_HID_UP_WACOMDIGITIZER | 0x0994)
+#define WACOM_HID_WD_BUTTONCENTER       (WACOM_HID_UP_WACOMDIGITIZER | 0x0995)
+#define WACOM_HID_WD_TOUCHONOFF         (WACOM_HID_UP_WACOMDIGITIZER | 0x0996)
+#define WACOM_HID_WD_FINGERWHEEL        (WACOM_HID_UP_WACOMDIGITIZER | 0x0d03)
+#define WACOM_HID_WD_OFFSETLEFT         (WACOM_HID_UP_WACOMDIGITIZER | 0x0d30)
+#define WACOM_HID_WD_OFFSETTOP          (WACOM_HID_UP_WACOMDIGITIZER | 0x0d31)
+#define WACOM_HID_WD_OFFSETRIGHT        (WACOM_HID_UP_WACOMDIGITIZER | 0x0d32)
+#define WACOM_HID_WD_OFFSETBOTTOM       (WACOM_HID_UP_WACOMDIGITIZER | 0x0d33)
+#define WACOM_HID_WD_DATAMODE           (WACOM_HID_UP_WACOMDIGITIZER | 0x1002)
+#define WACOM_HID_WD_DIGITIZERINFO      (WACOM_HID_UP_WACOMDIGITIZER | 0x1013)
+#define WACOM_HID_UP_G9                 0xff090000
+#define WACOM_HID_G9_PEN                (WACOM_HID_UP_G9 | 0x02)
+#define WACOM_HID_G9_TOUCHSCREEN        (WACOM_HID_UP_G9 | 0x11)
+#define WACOM_HID_UP_G11                0xff110000
+#define WACOM_HID_G11_PEN               (WACOM_HID_UP_G11 | 0x02)
+#define WACOM_HID_G11_TOUCHSCREEN       (WACOM_HID_UP_G11 | 0x11)
+
+#define WACOM_PAD_FIELD(f)	(((f)->physical == HID_DG_TABLETFUNCTIONKEY) || \
+				 ((f)->physical == WACOM_HID_WD_DIGITIZERFNKEYS) || \
+				 ((f)->physical == WACOM_HID_WD_DIGITIZERINFO))
 
 #define WACOM_PEN_FIELD(f)	(((f)->logical == HID_DG_STYLUS) || \
 				 ((f)->physical == HID_DG_STYLUS) || \
 				 ((f)->physical == HID_DG_PEN) || \
 				 ((f)->application == HID_DG_PEN) || \
 				 ((f)->application == HID_DG_DIGITIZER) || \
-				 ((f)->application == WACOM_VENDORDEFINED_PEN))
+				 ((f)->application == WACOM_HID_WD_DIGITIZER) || \
+				 ((f)->application == WACOM_HID_G9_PEN) || \
+				 ((f)->application == WACOM_HID_G11_PEN))
 #define WACOM_FINGER_FIELD(f)	(((f)->logical == HID_DG_FINGER) || \
 				 ((f)->physical == HID_DG_FINGER) || \
-				 ((f)->application == HID_DG_TOUCHSCREEN))
+				 ((f)->application == HID_DG_TOUCHSCREEN) || \
+				 ((f)->application == WACOM_HID_G9_TOUCHSCREEN) || \
+				 ((f)->application == WACOM_HID_G11_TOUCHSCREEN))
 
 enum {
 	PENPARTNER = 0,
@@ -167,8 +211,10 @@ struct wacom_features {
 	int x_resolution;
 	int y_resolution;
 	int numbered_buttons;
-	int x_min;
-	int y_min;
+	int offset_left;
+	int offset_right;
+	int offset_top;
+	int offset_bottom;
 	int device_type;
 	int x_phy;
 	int y_phy;
@@ -186,6 +232,7 @@ struct wacom_features {
 	int pktlen;
 	bool check_for_hid_type;
 	int hid_type;
+	bool input_event_flag;
 };
 
 struct wacom_shared {
@@ -202,6 +249,7 @@ struct wacom_shared {
 struct hid_data {
 	__s16 inputmode;	/* InputMode HID feature, -1 if non-existent */
 	__s16 inputmode_index;	/* InputMode HID feature index in the report */
+	bool sense_state;
 	bool inrange_state;
 	bool invert_state;
 	bool tipswitch;
@@ -217,6 +265,10 @@ struct hid_data {
 	int last_slot_field;
 	int num_expected;
 	int num_received;
+	int battery_capacity;
+	int bat_charging;
+	int bat_connected;
+	int ps_connected;
 };
 
 struct wacom_remote_data {
@@ -234,7 +286,7 @@ struct wacom_wac {
 	unsigned char data[WACOM_PKGLEN_MAX];
 	int tool[2];
 	int id[2];
-	__u32 serial[2];
+	__u64 serial[2];
 	bool reporting_data;
 	struct wacom_features features;
 	struct wacom_shared *shared;

include/linux/hid.h

@@ -231,7 +231,11 @@ struct hid_item {
 #define HID_DG_TAP		0x000d0035
 #define HID_DG_TABLETFUNCTIONKEY	0x000d0039
 #define HID_DG_PROGRAMCHANGEKEY	0x000d003a
+#define HID_DG_BATTERYSTRENGTH	0x000d003b
 #define HID_DG_INVERT		0x000d003c
+#define HID_DG_TILT_X		0x000d003d
+#define HID_DG_TILT_Y		0x000d003e
+#define HID_DG_TWIST		0x000d0041
 #define HID_DG_TIPSWITCH	0x000d0042
 #define HID_DG_TIPSWITCH2	0x000d0043
 #define HID_DG_BARRELSWITCH	0x000d0044
@@ -479,6 +483,7 @@ struct hid_input {
 	struct list_head list;
 	struct hid_report *report;
 	struct input_dev *input;
+	bool registered;
 };
 
 enum hid_type {