fsi/fsi-master-gpio: Delay sampling of FSI data input

Most SoC GPIO implementations, including the Aspeed one, have
synchronizers on the GPIO inputs. This means that the value
read from a GPIO is a couple of clocks old, from whatever clock
source feeds those synchronizers.

In practice, this means that in no-delay mode, we are using a
value that can potentially be a bit too old and too close to
the clock edge establishing the data on the other side of the link.

The voltage converters we use on some systems make this worse
and sensitive to things like voltage fluctuations etc... This is,
we believe, the cause of occasional CRC errors encountered during
heavy activity on the LPC bus.

This is fixed by introducing a dummy GPIO read before the actual
data read. It slows down SBEFIFO by about 15% (less than any delay
primitive) and the end result is so far solid.
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: default avatarChristopher Bostic <cbostic@linux.vnet.ibm.com>
Tested-by: default avatarJoel Stanley <joel@jms.id.au>
parent b632642e
...@@ -97,6 +97,11 @@ static int sda_clock_in(struct fsi_master_gpio *master) ...@@ -97,6 +97,11 @@ static int sda_clock_in(struct fsi_master_gpio *master)
if (!master->no_delays) if (!master->no_delays)
ndelay(FSI_GPIO_STD_DLY); ndelay(FSI_GPIO_STD_DLY);
gpiod_set_value(master->gpio_clk, 0); gpiod_set_value(master->gpio_clk, 0);
/* Dummy read to feed the synchronizers */
gpiod_get_value(master->gpio_data);
/* Actual data read */
in = gpiod_get_value(master->gpio_data); in = gpiod_get_value(master->gpio_data);
if (!master->no_delays) if (!master->no_delays)
ndelay(FSI_GPIO_STD_DLY); ndelay(FSI_GPIO_STD_DLY);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment