Commit f3f7af95 authored by Saravanan Sekar's avatar Saravanan Sekar Committed by Linus Walleij

pinctrl: actions: define pad control configurtion to SoC specific

pad control for s900 and s700 are differs in number of
pull control configuraions
s900 has 4 pull controls - high impedence, pull up, pull down, repeater
s700, s500 has 2 pull controls - pull up and pull down

so pad control configuration has to SoC specific, moved out from pinctrl
common to s900 specific.
Signed-off-by: default avatarParthiban Nallathambi <pn@denx.de>
Signed-off-by: default avatarSaravanan Sekar <sravanhome@gmail.com>
Acked-by: default avatarManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 0a98bf52
......@@ -246,60 +246,6 @@ static int owl_pad_pinconf_reg(const struct owl_padinfo *info,
return 0;
}
static int owl_pad_pinconf_arg2val(const struct owl_padinfo *info,
unsigned int param,
u32 *arg)
{
switch (param) {
case PIN_CONFIG_BIAS_BUS_HOLD:
*arg = OWL_PINCONF_PULL_HOLD;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
*arg = OWL_PINCONF_PULL_HIZ;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
*arg = OWL_PINCONF_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_PULL_UP:
*arg = OWL_PINCONF_PULL_UP;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
*arg = (*arg >= 1 ? 1 : 0);
break;
default:
return -ENOTSUPP;
}
return 0;
}
static int owl_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
unsigned int param,
u32 *arg)
{
switch (param) {
case PIN_CONFIG_BIAS_BUS_HOLD:
*arg = *arg == OWL_PINCONF_PULL_HOLD;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
*arg = *arg == OWL_PINCONF_PULL_HIZ;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
*arg = *arg == OWL_PINCONF_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_PULL_UP:
*arg = *arg == OWL_PINCONF_PULL_UP;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
*arg = *arg == 1;
break;
default:
return -ENOTSUPP;
}
return 0;
}
static int owl_pin_config_get(struct pinctrl_dev *pctrldev,
unsigned int pin,
unsigned long *config)
......@@ -318,7 +264,10 @@ static int owl_pin_config_get(struct pinctrl_dev *pctrldev,
arg = owl_read_field(pctrl, reg, bit, width);
ret = owl_pad_pinconf_val2arg(info, param, &arg);
if (!pctrl->soc->padctl_val2arg)
return -ENOTSUPP;
ret = pctrl->soc->padctl_val2arg(info, param, &arg);
if (ret)
return ret;
......@@ -349,7 +298,10 @@ static int owl_pin_config_set(struct pinctrl_dev *pctrldev,
if (ret)
return ret;
ret = owl_pad_pinconf_arg2val(info, param, &arg);
if (!pctrl->soc->padctl_arg2val)
return -ENOTSUPP;
ret = pctrl->soc->padctl_arg2val(info, param, &arg);
if (ret)
return ret;
......
......@@ -145,13 +145,6 @@
.shared_ctl_offset = _share, \
}
enum owl_pinconf_pull {
OWL_PINCONF_PULL_HIZ,
OWL_PINCONF_PULL_DOWN,
OWL_PINCONF_PULL_UP,
OWL_PINCONF_PULL_HOLD,
};
enum owl_pinconf_drv {
OWL_PINCONF_DRV_2MA,
OWL_PINCONF_DRV_4MA,
......@@ -305,6 +298,12 @@ struct owl_pinctrl_soc_data {
unsigned int ngpios;
const struct owl_gpio_port *ports;
unsigned int nports;
int (*padctl_val2arg)(const struct owl_padinfo *padinfo,
unsigned int param,
u32 *arg);
int (*padctl_arg2val)(const struct owl_padinfo *info,
unsigned int param,
u32 *arg);
};
int owl_pinctrl_probe(struct platform_device *pdev,
......
......@@ -13,6 +13,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinconf-generic.h>
#include "pinctrl-owl.h"
/* Pinctrl registers offset */
......@@ -1717,6 +1718,67 @@ static const struct owl_gpio_port s900_gpio_ports[] = {
OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8, 0x460, 0x140, 0x144, 0x178, 0)
};
enum s900_pinconf_pull {
OWL_PINCONF_PULL_HIZ,
OWL_PINCONF_PULL_DOWN,
OWL_PINCONF_PULL_UP,
OWL_PINCONF_PULL_HOLD,
};
static int s900_pad_pinconf_arg2val(const struct owl_padinfo *info,
unsigned int param,
u32 *arg)
{
switch (param) {
case PIN_CONFIG_BIAS_BUS_HOLD:
*arg = OWL_PINCONF_PULL_HOLD;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
*arg = OWL_PINCONF_PULL_HIZ;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
*arg = OWL_PINCONF_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_PULL_UP:
*arg = OWL_PINCONF_PULL_UP;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
*arg = (*arg >= 1 ? 1 : 0);
break;
default:
return -ENOTSUPP;
}
return 0;
}
static int s900_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
unsigned int param,
u32 *arg)
{
switch (param) {
case PIN_CONFIG_BIAS_BUS_HOLD:
*arg = *arg == OWL_PINCONF_PULL_HOLD;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
*arg = *arg == OWL_PINCONF_PULL_HIZ;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
*arg = *arg == OWL_PINCONF_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_PULL_UP:
*arg = *arg == OWL_PINCONF_PULL_UP;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
*arg = *arg == 1;
break;
default:
return -ENOTSUPP;
}
return 0;
}
static struct owl_pinctrl_soc_data s900_pinctrl_data = {
.padinfo = s900_padinfo,
.pins = (const struct pinctrl_pin_desc *)s900_pads,
......@@ -1727,7 +1789,9 @@ static struct owl_pinctrl_soc_data s900_pinctrl_data = {
.ngroups = ARRAY_SIZE(s900_groups),
.ngpios = NUM_GPIOS,
.ports = s900_gpio_ports,
.nports = ARRAY_SIZE(s900_gpio_ports)
.nports = ARRAY_SIZE(s900_gpio_ports),
.padctl_arg2val = s900_pad_pinconf_arg2val,
.padctl_val2arg = s900_pad_pinconf_val2arg,
};
static int s900_pinctrl_probe(struct platform_device *pdev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment