Commit f45a1f26 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: pcmuio: tidy up the register map defines

Add namespace to the register map defines. Gather them together
and tidy them up a bit.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 75ec1137
......@@ -80,6 +80,34 @@
#include "comedi_fc.h"
/*
* Register I/O map
*
* Offset Page 0 Page 1 Page 2 Page 3
* ------ ----------- ----------- ----------- -----------
* 0x00 Port 0 I/O Port 0 I/O Port 0 I/O Port 0 I/O
* 0x01 Port 1 I/O Port 1 I/O Port 1 I/O Port 1 I/O
* 0x02 Port 2 I/O Port 2 I/O Port 2 I/O Port 2 I/O
* 0x03 Port 3 I/O Port 3 I/O Port 3 I/O Port 3 I/O
* 0x04 Port 4 I/O Port 4 I/O Port 4 I/O Port 4 I/O
* 0x05 Port 5 I/O Port 5 I/O Port 5 I/O Port 5 I/O
* 0x06 INT_PENDING INT_PENDING INT_PENDING INT_PENDING
* 0x07 Page/Lock Page/Lock Page/Lock Page/Lock
* 0x08 N/A POL_0 ENAB_0 INT_ID0
* 0x09 N/A POL_1 ENAB_1 INT_ID1
* 0x0a N/A POL_2 ENAB_2 INT_ID2
*/
#define PCMUIO_PORT_REG(x) (0x00 + (x))
#define PCMUIO_INT_PENDING_REG 0x06
#define PCMUIO_PAGE_LOCK_REG 0x07
#define PCMUIO_LOCK_PORT(x) ((1 << (x)) & 0x3f)
#define PCMUIO_PAGE(x) (((x) & 0x3) << 6)
#define PCMUIO_PAGE_MASK PCMUIO_PAGE(3)
#define PCMUIO_PAGE_POL 1
#define PCMUIO_PAGE_ENAB 2
#define PCMUIO_PAGE_INT_ID 3
#define PCMUIO_PAGE_REG(x) (0x08 + (x))
#define CHANS_PER_PORT 8
#define PORTS_PER_ASIC 6
#define INTR_PORTS_PER_ASIC 3
......@@ -97,53 +125,9 @@
#define PCMUIO48_IOSIZE ASIC_IOSIZE
#define PCMUIO96_IOSIZE (ASIC_IOSIZE * 2)
/*
* Some offsets - these are all in the 16byte IO memory offset from
* the base address. Note that there is a paging scheme to swap out
* offsets 0x8-0xA using the PAGELOCK register. See the table below.
*
* Register(s) Pages R/W? Description
* --------------------------------------------------------------------------
* REG_PORTx All R/W Read/Write/Configure IO
* REG_INT_PENDING All ReadOnly Which INT_IDx has int.
* REG_PAGELOCK All WriteOnly Select a page
* REG_POLx Pg. 1 only WriteOnly Select edge-detection polarity
* REG_ENABx Pg. 2 only WriteOnly Enable/Disable edge-detect int.
* REG_INT_IDx Pg. 3 only R/W See which ports/bits have ints.
*/
#define REG_PORT0 0x0
#define REG_PORT1 0x1
#define REG_PORT2 0x2
#define REG_PORT3 0x3
#define REG_PORT4 0x4
#define REG_PORT5 0x5
#define REG_INT_PENDING 0x6
/*
* page selector register
* Upper 2 bits select a page and bits 0-5 are used to
* 'lock down' a particular port above to make it readonly.
*/
#define REG_PAGELOCK 0x7
#define REG_POL0 0x8
#define REG_POL1 0x9
#define REG_POL2 0xa
#define REG_ENAB0 0x8
#define REG_ENAB1 0x9
#define REG_ENAB2 0xa
#define REG_INT_ID0 0x8
#define REG_INT_ID1 0x9
#define REG_INT_ID2 0xa
#define NUM_PAGED_REGS 3
#define NUM_PAGES 4
#define FIRST_PAGED_REG 0x8
#define REG_PAGE_BITOFFSET 6
#define REG_LOCK_BITOFFSET 0
#define REG_PAGE_MASK (~((0x1 << REG_PAGE_BITOFFSET) - 1))
#define REG_LOCK_MASK ~(REG_PAGE_MASK)
#define PAGE_POL 1
#define PAGE_ENAB 2
#define PAGE_INT_ID 3
struct pcmuio_board {
const char *name;
......@@ -336,12 +320,12 @@ static void switch_page(struct comedi_device *dev, int asic, int page)
if (page < 0 || page >= NUM_PAGES)
return; /* more paranoia */
devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK;
devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET;
devpriv->asics[asic].pagelock &= ~PCMUIO_PAGE_MASK;
devpriv->asics[asic].pagelock |= PCMUIO_PAGE(page);
/* now write out the shadow register */
outb(devpriv->asics[asic].pagelock,
dev->iobase + ASIC_IOSIZE * asic + REG_PAGELOCK);
dev->iobase + ASIC_IOSIZE * asic + PCMUIO_PAGE_LOCK_REG);
}
static void init_asics(struct comedi_device *dev)
......@@ -358,7 +342,7 @@ static void init_asics(struct comedi_device *dev)
/* first, clear all the DIO port bits */
for (port = 0; port < PORTS_PER_ASIC; ++port)
outb(0, baseaddr + REG_PORT0 + port);
outb(0, baseaddr + PCMUIO_PORT_REG(port));
/* Next, clear all the paged registers for each page */
for (page = 1; page < NUM_PAGES; ++page) {
......@@ -370,13 +354,6 @@ static void init_asics(struct comedi_device *dev)
outb(0, baseaddr + reg);
}
/* DEBUG set rising edge interrupts on port0 of both asics */
/*switch_page(dev, asic, PAGE_POL);
outb(0xff, baseaddr + REG_POL0);
switch_page(dev, asic, PAGE_ENAB);
outb(0xff, baseaddr + REG_ENAB0); */
/* END DEBUG */
/* switch back to default page 0 */
switch_page(dev, asic, 0);
}
......@@ -398,10 +375,10 @@ static void pcmuio_stop_intr(struct comedi_device *dev,
s->async->inttrig = NULL;
nports = subpriv->intr.num_asic_chans / CHANS_PER_PORT;
firstport = subpriv->intr.asic_chan / CHANS_PER_PORT;
switch_page(dev, asic, PAGE_ENAB);
switch_page(dev, asic, PCMUIO_PAGE_ENAB);
for (port = firstport; port < firstport + nports; ++port) {
/* disable all intrs for this subdev.. */
outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port);
outb(0, devpriv->asics[asic].iobase + PCMUIO_PAGE_REG(port));
}
}
......@@ -478,17 +455,17 @@ static int pcmuio_handle_asic_interrupt(struct comedi_device *dev, int asic)
spin_lock_irqsave(&devpriv->asics[asic].spinlock, flags);
int_pend = inb(iobase + REG_INT_PENDING) & 0x07;
int_pend = inb(iobase + PCMUIO_INT_PENDING_REG) & 0x07;
if (int_pend) {
for (i = 0; i < INTR_PORTS_PER_ASIC; ++i) {
if (int_pend & (0x1 << i)) {
unsigned char val;
switch_page(dev, asic, PAGE_INT_ID);
val = inb(iobase + REG_INT_ID0 + i);
switch_page(dev, asic, PCMUIO_PAGE_INT_ID);
val = inb(iobase + PCMUIO_PAGE_REG(i));
if (val)
/* clear pending interrupt */
outb(0, iobase + REG_INT_ID0 + i);
outb(0, iobase + PCMUIO_PAGE_REG(i));
triggered |= (val << (i * 8));
}
......@@ -574,7 +551,7 @@ static int pcmuio_start_intr(struct comedi_device *dev,
1) << subpriv->intr.first_chan;
subpriv->intr.enabled_mask = bits;
switch_page(dev, asic, PAGE_ENAB);
switch_page(dev, asic, PCMUIO_PAGE_ENAB);
for (port = firstport; port < firstport + nports; ++port) {
unsigned enab =
bits >> (subpriv->intr.first_chan + (port -
......@@ -584,10 +561,10 @@ static int pcmuio_start_intr(struct comedi_device *dev,
(port - firstport) * 8) & 0xff;
/* set enab intrs for this subdev.. */
outb(enab,
devpriv->asics[asic].iobase + REG_ENAB0 + port);
switch_page(dev, asic, PAGE_POL);
devpriv->asics[asic].iobase + PCMUIO_PAGE_REG(port));
switch_page(dev, asic, PCMUIO_PAGE_POL);
outb(pol,
devpriv->asics[asic].iobase + REG_ENAB0 + port);
devpriv->asics[asic].iobase + PCMUIO_PAGE_REG(port));
}
}
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment