Merge tag 'lpc32xx-dt-for-5.2' of https://github.com/vzapolskiy/linux-lpc32xx into arm/dt

ARM: lpc32xx: devicetree updates for v5.2

Here are the changes for ARM NXP LPC32xx devicetree files:

* disabled I2S and MAC controllers by default,
* set default #address-cells = <1> / #size-cells = <0> for SPI slaves,
* fix notation of hexadecimal values,
* switched lpc32xx.dtsi to SPDX license identifier.

* tag 'lpc32xx-dt-for-5.2' of https://github.com/vzapolskiy/linux-lpc32xx:
  ARM: dts: lpc32xx: use SPDX license identifier
  ARM: dts: lpc32xx: add address and size cell values to SPI controller nodes
  ARM: dts: lpc32xx: disable MAC controller by default
  ARM: dts: lpc32xx: disable I2S controllers by default
  ARM: dts: lpc32xx: change hexadecimal values to lower case
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/lpc3250-ea3250.dts

@@ -201,6 +201,7 @@ isp1301: usb-transceiver@2d {
 &mac {
 	phy-mode = "rmii";
 	use-iram;
+	status = "okay";
 };
 
 /* Here, choose exactly one from: ohci, usbd */

arch/arm/boot/dts/lpc3250-phy3250.dts

@@ -134,6 +134,7 @@ &key {
 &mac {
 	phy-mode = "rmii";
 	use-iram;
+	status = "okay";
 };
 
 /* Here, choose exactly one from: ohci, usbd */
@@ -201,8 +202,6 @@ mtd4@604000 {
 };
 
 &ssp0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	num-cs = <1>;
 	cs-gpios = <&gpio 3 5 0>;
 	status = "okay";

arch/arm/boot/dts/lpc32xx.dtsi

+// SPDX-License-Identifier: GPL-2.0+
 /*
  * NXP LPC32xx SoC
  *
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
  * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <dt-bindings/clock/lpc32xx-clock.h>
@@ -152,6 +147,7 @@ mac: ethernet@31060000 {
 			reg = <0x31060000 0x1000>;
 			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_MAC>;
+			status = "disabled";
 		};
 
 		emc: memory-controller@31080000 {
@@ -185,6 +181,8 @@ ssp0: spi@20084000 {
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_SSP0>;
 				clock-names = "apb_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -192,6 +190,8 @@ spi1: spi@20088000 {
 				compatible = "nxp,lpc3220-spi";
 				reg = <0x20088000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_SPI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -205,6 +205,8 @@ ssp1: spi@2008c000 {
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_SSP1>;
 				clock-names = "apb_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -212,12 +214,15 @@ spi2: spi@20090000 {
 				compatible = "nxp,lpc3220-spi";
 				reg = <0x20090000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_SPI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
 			i2s0: i2s@20094000 {
 				compatible = "nxp,lpc3220-i2s";
 				reg = <0x20094000 0x1000>;
+				status = "disabled";
 			};
 
 			sd: sd@20098000 {
@@ -232,7 +237,8 @@ sd: sd@20098000 {
 
 			i2s1: i2s@2009c000 {
 				compatible = "nxp,lpc3220-i2s";
-				reg = <0x2009C000 0x1000>;
+				reg = <0x2009c000 0x1000>;
+				status = "disabled";
 			};
 
 			/* UART5 first since it is the default console, ttyS0 */
@@ -275,7 +281,7 @@ uart6: serial@40098000 {
 
 			i2c1: i2c@400a0000 {
 				compatible = "nxp,pnx-i2c";
-				reg = <0x400A0000 0x100>;
+				reg = <0x400a0000 0x100>;
 				interrupt-parent = <&sic1>;
 				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 				#address-cells = <1>;
@@ -286,7 +292,7 @@ i2c1: i2c@400a0000 {
 
 			i2c2: i2c@400a8000 {
 				compatible = "nxp,pnx-i2c";
-				reg = <0x400A8000 0x100>;
+				reg = <0x400a8000 0x100>;
 				interrupt-parent = <&sic1>;
 				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 				#address-cells = <1>;
@@ -297,7 +303,7 @@ i2c2: i2c@400a8000 {
 
 			mpwm: mpwm@400e8000 {
 				compatible = "nxp,lpc3220-motor-pwm";
-				reg = <0x400E8000 0x78>;
+				reg = <0x400e8000 0x78>;
 				status = "disabled";
 				#pwm-cells = <2>;
 			};
@@ -396,7 +402,7 @@ gpio: gpio@40028000 {
 
 			timer4: timer@4002c000 {
 				compatible = "nxp,lpc3220-timer";
-				reg = <0x4002C000 0x1000>;
+				reg = <0x4002c000 0x1000>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 				clocks = <&clk LPC32XX_CLK_TIMER4>;
 				clock-names = "timerclk";
@@ -414,7 +420,7 @@ timer5: timer@40030000 {
 
 			watchdog: watchdog@4003c000 {
 				compatible = "nxp,pnx4008-wdt";
-				reg = <0x4003C000 0x1000>;
+				reg = <0x4003c000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_WDOG>;
 			};
 
@@ -453,7 +459,7 @@ tsc: tsc@40048000 {
 
 			timer1: timer@4004c000 {
 				compatible = "nxp,lpc3220-timer";
-				reg = <0x4004C000 0x1000>;
+				reg = <0x4004c000 0x1000>;
 				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 				clocks = <&clk LPC32XX_CLK_TIMER1>;
 				clock-names = "timerclk";
@@ -479,7 +485,7 @@ timer2: timer@40058000 {
 
 			pwm1: pwm@4005c000 {
 				compatible = "nxp,lpc3220-pwm";
-				reg = <0x4005C000 0x4>;
+				reg = <0x4005c000 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM1>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
@@ -488,7 +494,7 @@ pwm1: pwm@4005c000 {
 
 			pwm2: pwm@4005c004 {
 				compatible = "nxp,lpc3220-pwm";
-				reg = <0x4005C004 0x4>;
+				reg = <0x4005c004 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM2>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;