Commit f48180a7 authored by Vignesh R's avatar Vignesh R Committed by Greg Kroah-Hartman

serial: 8250: 8250_core: Use dev_name() during request_irq()

Passing "serial" as name during request_irq() results in all serial port
irqs have same name. This does not help much to easily identify which
irq belongs to which serial port instance. Therefore pass dev_name()
during request_irq() so that better identifiable name is listed for
serial ports in cat /proc/interrupts output.

Output of cat /proc/interrupts
Before this patch:
 26:        689          0     GICv2 309 Edge      serial
After this patch:
 26:        696          0     GICv2 309 Edge      2530c00.serial
Signed-off-by: default avatarVignesh R <vigneshr@ti.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 22a33651
...@@ -218,7 +218,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up) ...@@ -218,7 +218,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
spin_unlock_irq(&i->lock); spin_unlock_irq(&i->lock);
irq_flags |= up->port.irqflags; irq_flags |= up->port.irqflags;
ret = request_irq(up->port.irq, serial8250_interrupt, ret = request_irq(up->port.irq, serial8250_interrupt,
irq_flags, "serial", i); irq_flags, dev_name(up->port.dev), i);
if (ret < 0) if (ret < 0)
serial_do_unlink(i, up); serial_do_unlink(i, up);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment