iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings

Move IIO channel definitions in st_lsm6dsx_sensor_settings in order to
support sensors with different channels maps.
This is a preliminary patch to add support for LSM9DS1 sensor to
st_lsm6dsx driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h

@@ -200,6 +200,7 @@ struct st_lsm6dsx_ext_dev_settings {
  * @wai: Sensor WhoAmI default value.
  * @max_fifo_size: Sensor max fifo length in FIFO words.
  * @id: List of hw id/device name supported by the driver configuration.
+ * @channels: IIO channels supported by the device.
  * @odr_table: Hw sensors odr table (Hz + val).
  * @fs_table: Hw sensors gain table (gain + val).
  * @decimator: List of decimator register info (addr + mask).
@@ -215,6 +216,10 @@ struct st_lsm6dsx_settings {
 		enum st_lsm6dsx_hw_id hw_id;
 		const char *name;
 	} id[ST_LSM6DSX_MAX_ID];
+	struct {
+		const struct iio_chan_spec *chan;
+		int len;
+	} channels[2];
 	struct st_lsm6dsx_odr_table_entry odr_table[2];
 	struct st_lsm6dsx_fs_table_entry fs_table[2];
 	struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c

@@ -61,6 +61,20 @@
 #define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR	0x13
 #define ST_LSM6DSX_REG_INT2_ON_INT1_MASK	BIT(5)
 
+static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
+	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x22, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x24, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x26, IIO_MOD_Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
 static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	{
 		.wai = 0x69,
@@ -71,6 +85,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.name = ST_LSM6DS3_DEV_NAME,
 			},
 		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
 		.odr_table = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.reg = {
@@ -169,6 +193,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.name = ST_LSM6DS3H_DEV_NAME,
 			},
 		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
 		.odr_table = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.reg = {
@@ -276,6 +310,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.name = ST_LSM6DS3TRC_DEV_NAME,
 			},
 		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
 		.odr_table = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.reg = {
@@ -377,6 +421,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.name = ST_LSM6DSOX_DEV_NAME,
 			},
 		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
 		.odr_table = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.reg = {
@@ -493,6 +547,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.name = ST_ASM330LHH_DEV_NAME,
 			},
 		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
 		.odr_table = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.reg = {
@@ -583,6 +647,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.name = ST_LSM6DSR_DEV_NAME,
 			},
 		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
 		.odr_table = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.reg = {
@@ -692,20 +766,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 };
 
-static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
-	IIO_CHAN_SOFT_TIMESTAMP(3),
-};
-
-static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
-	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x22, IIO_MOD_X, 0),
-	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x24, IIO_MOD_Y, 1),
-	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x26, IIO_MOD_Z, 2),
-	IIO_CHAN_SOFT_TIMESTAMP(3),
-};
-
 int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
 {
 	const struct st_lsm6dsx_shub_settings *hub_settings;
@@ -1263,6 +1323,8 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	iio_dev->modes = INDIO_DIRECT_MODE;
 	iio_dev->dev.parent = hw->dev;
 	iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks;
+	iio_dev->channels = hw->settings->channels[id].chan;
+	iio_dev->num_channels = hw->settings->channels[id].len;
 
 	sensor = iio_priv(iio_dev);
 	sensor->id = id;
@@ -1273,18 +1335,12 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 
 	switch (id) {
 	case ST_LSM6DSX_ID_ACC:
-		iio_dev->channels = st_lsm6dsx_acc_channels;
-		iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_acc_channels);
 		iio_dev->info = &st_lsm6dsx_acc_info;
-
 		scnprintf(sensor->name, sizeof(sensor->name), "%s_accel",
 			  name);
 		break;
 	case ST_LSM6DSX_ID_GYRO:
-		iio_dev->channels = st_lsm6dsx_gyro_channels;
-		iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_gyro_channels);
 		iio_dev->info = &st_lsm6dsx_gyro_info;
-
 		scnprintf(sensor->name, sizeof(sensor->name), "%s_gyro",
 			  name);
 		break;