Commit f51700a6 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: ni_tio: tidy up ni_tio_set_sync_mode()

The 'force_alt_sync' paramater is always 0. Remove it.

Absorb the GI_ALT_SYNC() inline helper and use some local variables
to clarify this function.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a56b3f57
......@@ -111,19 +111,6 @@
#define NI_660X_LOGIC_LOW_GATE2_SEL 0x1f
#define NI_660X_MAX_UP_DOWN_PIN 7
static inline unsigned int GI_ALT_SYNC(enum ni_gpct_variant variant)
{
switch (variant) {
case ni_gpct_variant_e_series:
default:
return 0;
case ni_gpct_variant_m_series:
return GI_M_ALT_SYNC;
case ni_gpct_variant_660x:
return GI_660X_ALT_SYNC;
}
}
static inline unsigned int GI_PRESCALE_X2(enum ni_gpct_variant variant)
{
switch (variant) {
......@@ -465,48 +452,56 @@ ni_tio_generic_clock_src_select(const struct ni_gpct *counter)
}
}
static void ni_tio_set_sync_mode(struct ni_gpct *counter, int force_alt_sync)
static void ni_tio_set_sync_mode(struct ni_gpct *counter)
{
struct ni_gpct_device *counter_dev = counter->counter_dev;
unsigned int cidx = counter->counter_index;
unsigned int counting_mode_reg = NITIO_CNT_MODE_REG(cidx);
static const u64 min_normal_sync_period_ps = 25000;
unsigned int mask = 0;
unsigned int bits = 0;
unsigned int reg;
unsigned int mode;
u64 clock_period_ps;
u64 ps;
bool force_alt_sync;
if (!ni_tio_counting_mode_registers_present(counter_dev))
/* only m series and 660x variants have counting mode registers */
switch (counter_dev->variant) {
case ni_gpct_variant_e_series:
default:
return;
case ni_gpct_variant_m_series:
mask = GI_M_ALT_SYNC;
break;
case ni_gpct_variant_660x:
mask = GI_660X_ALT_SYNC;
break;
}
mode = ni_tio_get_soft_copy(counter, counting_mode_reg);
reg = NITIO_CNT_MODE_REG(cidx);
mode = ni_tio_get_soft_copy(counter, reg);
switch (mode & GI_CNT_MODE_MASK) {
case GI_CNT_MODE_QUADX1:
case GI_CNT_MODE_QUADX2:
case GI_CNT_MODE_QUADX4:
case GI_CNT_MODE_SYNC_SRC:
force_alt_sync = 1;
force_alt_sync = true;
break;
default:
force_alt_sync = false;
break;
}
clock_period_ps = ni_tio_clock_period_ps(counter,
ni_tio_generic_clock_src_select(counter));
ps = ni_tio_clock_period_ps(counter,
ni_tio_generic_clock_src_select(counter));
/*
* It's not clear what we should do if clock_period is unknown, so we
* are not using the alt sync bit in that case, but allow the caller
* to decide by using the force_alt_sync parameter.
* are not using the alt sync bit in that case.
*/
if (force_alt_sync ||
(clock_period_ps && clock_period_ps < min_normal_sync_period_ps)) {
ni_tio_set_bits(counter, counting_mode_reg,
GI_ALT_SYNC(counter_dev->variant),
GI_ALT_SYNC(counter_dev->variant));
} else {
ni_tio_set_bits(counter, counting_mode_reg,
GI_ALT_SYNC(counter_dev->variant),
0x0);
}
if (force_alt_sync || (ps && ps < min_normal_sync_period_ps))
bits = mask;
ni_tio_set_bits(counter, reg, mask, bits);
}
static int ni_tio_set_counter_mode(struct ni_gpct *counter, unsigned int mode)
......@@ -552,7 +547,7 @@ static int ni_tio_set_counter_mode(struct ni_gpct *counter, unsigned int mode)
ni_tio_set_bits(counter, NITIO_CNT_MODE_REG(cidx),
GI_CNT_MODE_MASK | GI_INDEX_PHASE_MASK |
GI_INDEX_MODE, bits);
ni_tio_set_sync_mode(counter, 0);
ni_tio_set_sync_mode(counter);
}
ni_tio_set_bits(counter, NITIO_CMD_REG(cidx), GI_CNT_DIR_MASK,
......@@ -807,7 +802,7 @@ static int ni_tio_set_clock_src(struct ni_gpct *counter,
GI_PRESCALE_X8(counter_dev->variant), bits);
}
counter->clock_period_ps = period_ns * 1000;
ni_tio_set_sync_mode(counter, 0);
ni_tio_set_sync_mode(counter);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment