Commit f5ae371a authored by Frank Schaefer's avatar Frank Schaefer Committed by Mauro Carvalho Chehab

[media] em28xx: respect the message size constraints for i2c transfers

The em2800 can transfer up to 4 bytes per i2c message.
All other em25xx/em27xx/28xx chips can transfer at least 64 bytes per message.
I2C adapters should never split messages transferred via the I2C subsystem
into multiple message transfers, because the result will almost always NOT be
the same as when the whole data is transferred to the I2C client in a single
message.
If the message size exceeds the capabilities of the I2C adapter, -EOPNOTSUPP
should be returned.
Signed-off-by: default avatarFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 6ea887ef
......@@ -50,14 +50,18 @@ do { \
} while (0)
/*
* em2800_i2c_send_max4()
* send up to 4 bytes to the i2c device
* em2800_i2c_send_bytes()
* send up to 4 bytes to the em2800 i2c device
*/
static int em2800_i2c_send_max4(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
{
int ret;
int write_timeout;
u8 b2[6];
if (len < 1 || len > 4)
return -EOPNOTSUPP;
BUG_ON(len < 1 || len > 4);
b2[5] = 0x80 + len - 1;
b2[4] = addr;
......@@ -85,29 +89,6 @@ static int em2800_i2c_send_max4(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
return -EIO;
}
/*
* em2800_i2c_send_bytes()
*/
static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
{
u8 *bufPtr = buf;
int ret;
int wrcount = 0;
int count;
int maxLen = 4;
while (len > 0) {
count = (len > maxLen) ? maxLen : len;
ret = em2800_i2c_send_max4(dev, addr, bufPtr, count);
if (ret > 0) {
len -= count;
bufPtr += count;
wrcount += count;
} else
return (ret < 0) ? ret : -EFAULT;
}
return wrcount;
}
/*
* em2800_i2c_check_for_device()
* check if there is a i2c_device at the supplied address
......@@ -150,6 +131,10 @@ static int em2800_i2c_check_for_device(struct em28xx *dev, u8 addr)
static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
{
int ret;
if (len < 1 || len > 4)
return -EOPNOTSUPP;
/* check for the device and set i2c read address */
ret = em2800_i2c_check_for_device(dev, addr);
if (ret) {
......@@ -176,6 +161,9 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
int wrcount = 0;
int write_timeout, ret;
if (len < 1 || len > 64)
return -EOPNOTSUPP;
wrcount = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
/* Seems to be required after a write */
......@@ -197,6 +185,10 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len)
{
int ret;
if (len < 1 || len > 64)
return -EOPNOTSUPP;
ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len);
if (ret < 0) {
em28xx_warn("reading i2c device failed (error=%i)\n", ret);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment