Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Kevin Hilman:
 "Some of these are for drivers/soc, where we're now putting
  SoC-specific drivers these days.  Some are for other driver subsystems
  where we have received acks from the appropriate maintainers.

  Some highlights:

   - simple-mfd: document DT bindings and misc updates
   - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
   - memory: support for Tegra132 SoC
   - memory: introduce tegra EMC driver for scaling memory frequency
   - misc. updates for ARM CCI and CCN busses"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: soc: sunxi: Introduce SoC driver to map SRAMs
  arm-cci: Add aliases for PMU events
  arm-cci: Add CCI-500 PMU support
  arm-cci: Sanitise CCI400 PMU driver specific code
  arm-cci: Abstract handling for CCI events
  arm-cci: Abstract out the PMU counter details
  arm-cci: Cleanup PMU driver code
  arm-cci: Do not enable CCI-400 PMU by default
  firmware: qcom: scm: Add HDCP Support
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: remove useless chip and system ctrl compatibles
  clk: berlin: drop direct of_iomap of nodes reg property
  ARM: berlin: move BG2Q clock node
  ARM: berlin: move BG2CD clock node
  ARM: berlin: move BG2 clock node
  clk: berlin: prepare simple-mfd conversion
  pinctrl: berlin: drop SoC stub provided regmap
  ARM: berlin: move pinctrl to simple-mfd nodes
  pinctrl: berlin: prepare to use regmap provided by syscon
  reset: berlin: drop arch_initcall initialization
  ...

Documentation/arm/CCN.txt

@@ -33,20 +33,23 @@ directory, with first 8 configurable by user and additional
 Cycle counter is described by a "type" value 0xff and does
 not require any other settings.
 
+The driver also provides a "cpumask" sysfs attribute, which contains
+a single CPU ID, of the processor which will be used to handle all
+the CCN PMU events. It is recommended that the user space tools
+request the events on this processor (if not, the perf_event->cpu value
+will be overwritten anyway). In case of this processor being offlined,
+the events are migrated to another one and the attribute is updated.
+
 Example of perf tool use:
 
 / # perf list | grep ccn
   ccn/cycles/                                        [Kernel PMU event]
 <...>
-  ccn/xp_valid_flit/                                 [Kernel PMU event]
+  ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/          [Kernel PMU event]
 <...>
 
-/ # perf stat -C 0 -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+/ # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
                                                                        sleep 1
 
 The driver does not support sampling, therefore "perf record" will
-not work. Also notice that only single cpu is being selected
-("-C 0") - this is because perf framework does not support
-"non-CPU related" counters (yet?) so system-wide session ("-a")
-would try (and in most cases fail) to set up the same event
-per each CPU.
+not work. Per-task (without "-a") perf sessions are not supported.

Documentation/devicetree/bindings/arm/cci.txt

@@ -31,8 +31,9 @@ specific to ARM.
 	- compatible
 		Usage: required
 		Value type: <string>
-		Definition: must be set to
+		Definition: must contain one of the following:
 			    "arm,cci-400"
+			    "arm,cci-500"
 
 	- reg
 		Usage: required
@@ -99,6 +100,7 @@ specific to ARM.
 				 "arm,cci-400-pmu,r1"
 				 "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
 						      secure acces to CCI registers
+				 "arm,cci-500-pmu,r0"
 		- reg:
 			Usage: required
 			Value type: Integer cells. A register entry, expressed

Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt

 NVIDIA Tegra Memory Controller device tree bindings
 ===================================================
 
+memory-controller node
+----------------------
+
 Required properties:
 - compatible: Should be "nvidia,tegra<chip>-mc"
 - reg: Physical base address and length of the controller's registers.
@@ -15,9 +18,49 @@ Required properties:
 This device implements an IOMMU that complies with the generic IOMMU binding.
 See ../iommu/iommu.txt for details.
 
-Example:
---------
+emc-timings subnode
+-------------------
+
+The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in
+register PMC_STRAPPING_OPT_A).
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for.
+
+timing subnode
+--------------
+
+Each "emc-timings" node should contain a subnode for every supported EMC clock rate.
+
+Required properties for timing nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC
+(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be
+specified, according to the board documentation:
+
+	MC_EMEM_ARB_CFG
+	MC_EMEM_ARB_OUTSTANDING_REQ
+	MC_EMEM_ARB_TIMING_RCD
+	MC_EMEM_ARB_TIMING_RP
+	MC_EMEM_ARB_TIMING_RC
+	MC_EMEM_ARB_TIMING_RAS
+	MC_EMEM_ARB_TIMING_FAW
+	MC_EMEM_ARB_TIMING_RRD
+	MC_EMEM_ARB_TIMING_RAP2PRE
+	MC_EMEM_ARB_TIMING_WAP2PRE
+	MC_EMEM_ARB_TIMING_R2R
+	MC_EMEM_ARB_TIMING_W2W
+	MC_EMEM_ARB_TIMING_R2W
+	MC_EMEM_ARB_TIMING_W2R
+	MC_EMEM_ARB_DA_TURNS
+	MC_EMEM_ARB_DA_COVERS
+	MC_EMEM_ARB_MISC0
+	MC_EMEM_ARB_MISC1
+	MC_EMEM_ARB_RING1_THROTTLE
 
+Example SoC include file:
+
+/ {
 	mc: memory-controller@0,70019000 {
 		compatible = "nvidia,tegra124-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
@@ -34,3 +77,40 @@ Example:
 		...
 		iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
 	};
+};
+
+Example board file:
+
+/ {
+	memory-controller@0,70019000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/mfd/mfd.txt

+Multi-Function Devices (MFD)
+
+These devices comprise a nexus for heterogeneous hardware blocks containing
+more than one non-unique yet varying hardware functionality.
+
+A typical MFD can be:
+
+- A mixed signal ASIC on an external bus, sometimes a PMIC (Power Management
+  Integrated Circuit) that is manufactured in a lower technology node (rough
+  silicon) that handles analog drivers for things like audio amplifiers, LED
+  drivers, level shifters, PHY (physical interfaces to things like USB or
+  ethernet), regulators etc.
+
+- A range of memory registers containing "miscellaneous system registers" also
+  known as a system controller "syscon" or any other memory range containing a
+  mix of unrelated hardware devices.
+
+Optional properties:
+
+- compatible : "simple-mfd" - this signifies that the operating system should
+  consider all subnodes of the MFD device as separate devices akin to how
+  "simple-bus" inidicates when to see subnodes as children for a simple
+  memory-mapped bus. For more complex devices, when the nexus driver has to
+  probe registers to figure out what child devices exist etc, this should not
+  be used. In the latter case the child devices will be determined by the
+  operating system.
+
+Example:
+
+foo@1000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x01000 0x1000>;
+
+	led@08.0 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x01>;
+		label = "myled";
+		default-state = "on";
+	};
+};

Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt

@@ -10,3 +10,5 @@ Required properties:
        The second entry gives the physical address and length of the
        registers indicating the strapping options.
 
+Optional properties:
+- nvidia,long-ram-code: If present, the RAM code is long (4 bit). If not, short (2 bit).

Documentation/devicetree/bindings/soc/sunxi/sram.txt

+Allwinnner SoC SRAM controllers
+-----------------------------------------------------
+
+The SRAM controller found on most Allwinner devices is represented by
+a regular node for the SRAM controller itself, with sub-nodes
+reprensenting the SRAM handled by the SRAM controller.
+
+Controller Node
+---------------
+
+Required properties:
+- compatible : "allwinner,sun4i-a10-sram-controller"
+- reg : sram controller register offset + length
+
+SRAM nodes
+----------
+
+Each SRAM is described using the mmio-sram bindings documented in
+Documentation/devicetree/bindings/misc/sram.txt
+
+Each SRAM will have SRAM sections that are going to be handled by the
+SRAM controller as subnodes. These sections are represented following
+once again the representation described in the mmio-sram binding.
+
+The valid sections compatible are:
+    - allwinner,sun4i-a10-sram-a3-a4
+    - allwinner,sun4i-a10-sram-d
+
+Devices using SRAM sections
+---------------------------
+
+Some devices need to request to the SRAM controller to map an SRAM for
+their exclusive use.
+
+The relationship between such a device and an SRAM section is
+expressed through the allwinner,sram property, that will take a
+phandle and an argument.
+
+This valid values for this argument are:
+  - 0: CPU
+  - 1: Device
+
+Example
+-------
+sram-controller@01c00000 {
+	compatible = "allwinner,sun4i-a10-sram-controller";
+	reg = <0x01c00000 0x30>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	sram_a: sram@00000000 {
+		compatible = "mmio-sram";
+		reg = <0x00000000 0xc000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00000000 0xc000>;
+
+		emac_sram: sram-section@8000 {
+			compatible = "allwinner,sun4i-a10-sram-a3-a4";
+			reg = <0x8000 0x4000>;
+			status = "disabled";
+		};
+	};
+};
+
+emac: ethernet@01c0b000 {
+	compatible = "allwinner,sun4i-a10-emac";
+	...
+
+	allwinner,sram = <&emac_sram 1>;
+};

arch/arm/boot/dts/arm-realview-pb1176.dts

@@ -114,7 +114,7 @@ soc {
 		ranges;
 
 		syscon: syscon@10000000 {
-			compatible = "arm,realview-pb1176-syscon", "syscon";
+			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
 
 			led@08.0 {

arch/arm/boot/dts/berlin2.dtsi

@@ -84,7 +84,7 @@ soc {
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
-			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
 			clock-names = "io", "core";
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -93,7 +93,7 @@ sdhci0: sdhci@ab0000 {
 		sdhci1: sdhci@ab0800 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0800 0x200>;
-			clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
 			clock-names = "io", "core";
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -103,7 +103,7 @@ sdhci2: sdhci@ab1000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
 			clock-names = "io", "core";
 			pinctrl-0 = <&emmc_pmux>;
 			pinctrl-names = "default";
@@ -133,13 +133,13 @@ local-timer@ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&chip CLKID_TWD>;
+			clocks = <&chip_clk CLKID_TWD>;
 		};
 
 		eth1: ethernet@b90000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xb90000 0x10000>;
-			clocks = <&chip CLKID_GETH1>;
+			clocks = <&chip_clk CLKID_GETH1>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -162,7 +162,7 @@ cpu-ctrl@dd0000 {
 		eth0: ethernet@e50000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xe50000 0x10000>;
-			clocks = <&chip CLKID_GETH0>;
+			clocks = <&chip_clk CLKID_GETH0>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -261,7 +261,7 @@ timer0: timer@2c00 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
 				interrupts = <8>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -270,7 +270,7 @@ timer1: timer@2c14 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
 				interrupts = <9>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -279,7 +279,7 @@ timer2: timer@2c28 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
 				interrupts = <10>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -288,7 +288,7 @@ timer3: timer@2c3c {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
 				interrupts = <11>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -297,7 +297,7 @@ timer4: timer@2c50 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
 				interrupts = <12>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -306,7 +306,7 @@ timer5: timer@2c64 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
 				interrupts = <13>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -315,7 +315,7 @@ timer6: timer@2c78 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
 				interrupts = <14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -324,7 +324,7 @@ timer7: timer@2c8c {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
 				interrupts = <15>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -343,7 +343,7 @@ ahci: sata@e90000 {
 			compatible = "marvell,berlin2-ahci", "generic-ahci";
 			reg = <0xe90000 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_SATA>;
+			clocks = <&chip_clk CLKID_SATA>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -363,7 +363,7 @@ sata1: sata-port@1 {
 		sata_phy: phy@e900a0 {
 			compatible = "marvell,berlin2-sata-phy";
 			reg = <0xe900a0 0x200>;
-			clocks = <&chip CLKID_SATA>;
+			clocks = <&chip_clk CLKID_SATA>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#phy-cells = <1>;
@@ -379,16 +379,28 @@ sata-phy@1 {
 		};
 
 		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2-chip-ctrl";
-			#clock-cells = <1>;
-			#reset-cells = <2>;
+			compatible = "simple-mfd", "syscon";
 			reg = <0xea0000 0x400>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
 
-			emmc_pmux: emmc-pmux {
-				groups = "G26";
-				function = "emmc";
+			chip_clk: clock {
+				compatible = "marvell,berlin2-clk";
+				#clock-cells = <1>;
+				clocks = <&refclk>;
+				clock-names = "refclk";
+			};
+
+			soc_pinctrl: pin-controller {
+				compatible = "marvell,berlin2-soc-pinctrl";
+
+				emmc_pmux: emmc-pmux {
+					groups = "G26";
+					function = "emmc";
+				};
+			};
+
+			chip_rst: reset {
+				compatible = "marvell,berlin2-reset";
+				#reset-cells = <2>;
 			};
 		};
 
@@ -470,22 +482,24 @@ uart2: serial@b000 {
 			};
 
 			sysctrl: system-controller@d000 {
-				compatible = "marvell,berlin2-system-ctrl";
+				compatible = "simple-mfd", "syscon";
 				reg = <0xd000 0x100>;
 
-				uart0_pmux: uart0-pmux {
-					groups = "GSM4";
-					function = "uart0";
-				};
-
-				uart1_pmux: uart1-pmux {
-					groups = "GSM5";
-					function = "uart1";
-				};
-
-				uart2_pmux: uart2-pmux {
-					groups = "GSM3";
-					function = "uart2";
+				sys_pinctrl: pin-controller {
+					compatible = "marvell,berlin2-system-pinctrl";
+					uart0_pmux: uart0-pmux {
+						groups = "GSM4";
+						function = "uart0";
+					};
+
+					uart1_pmux: uart1-pmux {
+						groups = "GSM5";
+						function = "uart1";
+					};
+					uart2_pmux: uart2-pmux {
+						groups = "GSM3";
+						function = "uart2";
+					};
 				};
 			};
 

arch/arm/boot/dts/berlin2cd.dtsi

@@ -81,7 +81,7 @@ pmu {
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
-			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
 			clock-names = "io", "core";
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -105,14 +105,14 @@ local-timer@ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&chip CLKID_TWD>;
+			clocks = <&chip_clk CLKID_TWD>;
 		};
 
 		usb_phy0: usb-phy@b74000 {
 			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb74000 0x128>;
 			#phy-cells = <0>;
-			resets = <&chip 0x178 23>;
+			resets = <&chip_rst 0x178 23>;
 			status = "disabled";
 		};
 
@@ -120,14 +120,14 @@ usb_phy1: usb-phy@b78000 {
 			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb78000 0x128>;
 			#phy-cells = <0>;
-			resets = <&chip 0x178 24>;
+			resets = <&chip_rst 0x178 24>;
 			status = "disabled";
 		};
 
 		eth1: ethernet@b90000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xb90000 0x10000>;
-			clocks = <&chip CLKID_GETH1>;
+			clocks = <&chip_clk CLKID_GETH1>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -145,7 +145,7 @@ ethphy1: ethernet-phy@0 {
 		eth0: ethernet@e50000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xe50000 0x10000>;
-			clocks = <&chip CLKID_GETH0>;
+			clocks = <&chip_clk CLKID_GETH0>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -244,7 +244,7 @@ timer0: timer@2c00 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
 				interrupts = <8>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -253,7 +253,7 @@ timer1: timer@2c14 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
 				interrupts = <9>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -262,7 +262,7 @@ timer2: timer@2c28 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
 				interrupts = <10>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -271,7 +271,7 @@ timer3: timer@2c3c {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
 				interrupts = <11>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -280,7 +280,7 @@ timer4: timer@2c50 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
 				interrupts = <12>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -289,7 +289,7 @@ timer5: timer@2c64 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
 				interrupts = <13>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -298,7 +298,7 @@ timer6: timer@2c78 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
 				interrupts = <14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -307,7 +307,7 @@ timer7: timer@2c8c {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
 				interrupts = <15>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -323,16 +323,28 @@ aic: interrupt-controller@3000 {
 		};
 
 		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2cd-chip-ctrl";
-			#clock-cells = <1>;
-			#reset-cells = <2>;
+			compatible = "simple-mfd", "syscon";
 			reg = <0xea0000 0x400>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
 
-			uart0_pmux: uart0-pmux {
-				groups = "G6";
-				function = "uart0";
+			chip_clk: clock {
+				compatible = "marvell,berlin2-clk";
+				#clock-cells = <1>;
+				clocks = <&refclk>;
+				clock-names = "refclk";
+			};
+
+			soc_pinctrl: pin-controller {
+				compatible = "marvell,berlin2cd-soc-pinctrl";
+
+				uart0_pmux: uart0-pmux {
+					groups = "G6";
+					function = "uart0";
+				};
+			};
+
+			chip_rst: reset {
+				compatible = "marvell,berlin2-reset";
+				#reset-cells = <2>;
 			};
 		};
 
@@ -340,7 +352,7 @@ usb0: usb@ed0000 {
 			compatible = "chipidea,usb2";
 			reg = <0xed0000 0x200>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB0>;
+			clocks = <&chip_clk CLKID_USB0>;
 			phys = <&usb_phy0>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -350,7 +362,7 @@ usb1: usb@ee0000 {
 			compatible = "chipidea,usb2";
 			reg = <0xee0000 0x200>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB1>;
+			clocks = <&chip_clk CLKID_USB1>;
 			phys = <&usb_phy1>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -417,8 +429,12 @@ uart1: serial@a000 {
 			};
 
 			sysctrl: system-controller@d000 {
-				compatible = "marvell,berlin2cd-system-ctrl";
+				compatible = "simple-mfd", "syscon";
 				reg = <0xd000 0x100>;
+
+				sys_pinctrl: pin-controller {
+					compatible = "marvell,berlin2cd-system-pinctrl";
+				};
 			};
 
 			sic: interrupt-controller@e000 {

arch/arm/boot/dts/berlin2q.dtsi

@@ -102,7 +102,7 @@ pmu {
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
-			clocks = <&chip CLKID_SDIO1XIN>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -110,7 +110,7 @@ sdhci0: sdhci@ab0000 {
 		sdhci1: sdhci@ab0800 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0800 0x200>;
-			clocks = <&chip CLKID_SDIO1XIN>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -119,7 +119,7 @@ sdhci2: sdhci@ab1000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
 			clock-names = "io", "core";
 			status = "disabled";
 		};
@@ -140,7 +140,7 @@ scu: snoop-control-unit@ad0000 {
 		local-timer@ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
-			clocks = <&chip CLKID_TWD>;
+			clocks = <&chip_clk CLKID_TWD>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
@@ -155,7 +155,7 @@ usb_phy2: phy@a2f400 {
 			compatible = "marvell,berlin2-usb-phy";
 			reg = <0xa2f400 0x128>;
 			#phy-cells = <0>;
-			resets = <&chip 0x104 14>;
+			resets = <&chip_rst 0x104 14>;
 			status = "disabled";
 		};
 
@@ -163,7 +163,7 @@ usb2: usb@a30000 {
 			compatible = "chipidea,usb2";
 			reg = <0xa30000 0x10000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB2>;
+			clocks = <&chip_clk CLKID_USB2>;
 			phys = <&usb_phy2>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -173,7 +173,7 @@ usb_phy0: phy@b74000 {
 			compatible = "marvell,berlin2-usb-phy";
 			reg = <0xb74000 0x128>;
 			#phy-cells = <0>;
-			resets = <&chip 0x104 12>;
+			resets = <&chip_rst 0x104 12>;
 			status = "disabled";
 		};
 
@@ -181,14 +181,14 @@ usb_phy1: phy@b78000 {
 			compatible = "marvell,berlin2-usb-phy";
 			reg = <0xb78000 0x128>;
 			#phy-cells = <0>;
-			resets = <&chip 0x104 13>;
+			resets = <&chip_rst 0x104 13>;
 			status = "disabled";
 		};
 
 		eth0: ethernet@b90000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xb90000 0x10000>;
-			clocks = <&chip CLKID_GETH0>;
+			clocks = <&chip_clk CLKID_GETH0>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -295,7 +295,7 @@ i2c0: i2c@1400 {
 				reg = <0x1400 0x100>;
 				interrupt-parent = <&aic>;
 				interrupts = <4>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				pinctrl-0 = <&twsi0_pmux>;
 				pinctrl-names = "default";
 				status = "disabled";
@@ -308,7 +308,7 @@ i2c1: i2c@1800 {
 				reg = <0x1800 0x100>;
 				interrupt-parent = <&aic>;
 				interrupts = <5>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				pinctrl-0 = <&twsi1_pmux>;
 				pinctrl-names = "default";
 				status = "disabled";
@@ -317,7 +317,7 @@ i2c1: i2c@1800 {
 			timer0: timer@2c00 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				interrupts = <8>;
 			};
@@ -325,14 +325,14 @@ timer0: timer@2c00 {
 			timer1: timer@2c14 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 			};
 
 			timer2: timer@2c28 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -340,7 +340,7 @@ timer2: timer@2c28 {
 			timer3: timer@2c3c {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -348,7 +348,7 @@ timer3: timer@2c3c {
 			timer4: timer@2c50 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -356,7 +356,7 @@ timer4: timer@2c50 {
 			timer5: timer@2c64 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -364,7 +364,7 @@ timer5: timer@2c64 {
 			timer6: timer@2c78 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -372,7 +372,7 @@ timer6: timer@2c78 {
 			timer7: timer@2c8c {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -388,21 +388,33 @@ aic: interrupt-controller@3800 {
 		};
 
 		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2q-chip-ctrl";
-			#clock-cells = <1>;
-			#reset-cells = <2>;
+			compatible = "simple-mfd", "syscon";
 			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
 
-			twsi0_pmux: twsi0-pmux {
-				groups = "G6";
-				function = "twsi0";
+			chip_clk: clock {
+				compatible = "marvell,berlin2q-clk";
+				#clock-cells = <1>;
+				clocks = <&refclk>;
+				clock-names = "refclk";
 			};
 
-			twsi1_pmux: twsi1-pmux {
-				groups = "G7";
-				function = "twsi1";
+			soc_pinctrl: pin-controller {
+				compatible = "marvell,berlin2q-soc-pinctrl";
+
+				twsi0_pmux: twsi0-pmux {
+					groups = "G6";
+					function = "twsi0";
+				};
+
+				twsi1_pmux: twsi1-pmux {
+					groups = "G7";
+					function = "twsi1";
+				};
+			};
+
+			chip_rst: reset {
+				compatible = "marvell,berlin2-reset";
+				#reset-cells = <2>;
 			};
 		};
 
@@ -410,7 +422,7 @@ ahci: sata@e90000 {
 			compatible = "marvell,berlin2q-ahci", "generic-ahci";
 			reg = <0xe90000 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_SATA>;
+			clocks = <&chip_clk CLKID_SATA>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -430,7 +442,7 @@ sata1: sata-port@1 {
 		sata_phy: phy@e900a0 {
 			compatible = "marvell,berlin2q-sata-phy";
 			reg = <0xe900a0 0x200>;
-			clocks = <&chip CLKID_SATA>;
+			clocks = <&chip_clk CLKID_SATA>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#phy-cells = <1>;
@@ -449,7 +461,7 @@ usb0: usb@ed0000 {
 			compatible = "chipidea,usb2";
 			reg = <0xed0000 0x10000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB0>;
+			clocks = <&chip_clk CLKID_USB0>;
 			phys = <&usb_phy0>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -459,7 +471,7 @@ usb1: usb@ee0000 {
 			compatible = "chipidea,usb2";
 			reg = <0xee0000 0x10000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB1>;
+			clocks = <&chip_clk CLKID_USB1>;
 			phys = <&usb_phy1>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -554,27 +566,37 @@ porte: gpio-port@4 {
 			};
 
 			sysctrl: pin-controller@d000 {
-				compatible = "marvell,berlin2q-system-ctrl";
+				compatible = "simple-mfd", "syscon";
 				reg = <0xd000 0x100>;
 
-				uart0_pmux: uart0-pmux {
-					groups = "GSM12";
-					function = "uart0";
-				};
+				sys_pinctrl: pin-controller {
+					compatible = "marvell,berlin2q-system-pinctrl";
 
-				uart1_pmux: uart1-pmux {
-					groups = "GSM14";
-					function = "uart1";
-				};
+					uart0_pmux: uart0-pmux {
+						groups = "GSM12";
+						function = "uart0";
+					};
+
+					uart1_pmux: uart1-pmux {
+						groups = "GSM14";
+						function = "uart1";
+					};
+
+					twsi2_pmux: twsi2-pmux {
+						groups = "GSM13";
+						function = "twsi2";
+					};
 
-				twsi2_pmux: twsi2-pmux {
-					groups = "GSM13";
-					function = "twsi2";
+					twsi3_pmux: twsi3-pmux {
+						groups = "GSM14";
+						function = "twsi3";
+					};
 				};
 
-				twsi3_pmux: twsi3-pmux {
-					groups = "GSM14";
-					function = "twsi3";
+				adc: adc {
+					compatible = "marvell,berlin2-adc";
+					interrupts = <12>, <14>;
+					interrupt-names = "adc", "tsen";
 				};
 			};
 

arch/arm/boot/dts/integrator.dtsi

@@ -6,7 +6,7 @@
 
 / {
 	core-module@10000000 {
-		compatible = "arm,core-module-integrator", "syscon";
+		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
 
 		/* Use core module LED to indicate CPU load */
@@ -95,7 +95,7 @@ kmi@19000000 {
 
 		syscon {
 			/* Debug registers mapped as syscon */
-			compatible = "syscon";
+			compatible = "syscon", "simple-mfd";
 			reg = <0x1a000000 0x10>;
 
 			led@04.0 {

arch/arm/mach-berlin/Kconfig

@@ -6,6 +6,7 @@ menuconfig ARCH_BERLIN
 	select DW_APB_ICTL
 	select DW_APB_TIMER_OF
 	select GENERIC_IRQ_CHIP
+	select MFD_SYSCON
 	select PINCTRL
 
 if ARCH_BERLIN

arch/arm64/boot/dts/arm/juno-motherboard.dtsi

@@ -138,6 +138,74 @@ v2m_sysctl: sysctl@020000 {
 					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
 				};
 
+				apbregs@010000 {
+					compatible = "syscon", "simple-mfd";
+					reg = <0x010000 0x1000>;
+
+					led@08.0 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x01>;
+						label = "vexpress:0";
+						linux,default-trigger = "heartbeat";
+						default-state = "on";
+					};
+					led@08.1 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x02>;
+						label = "vexpress:1";
+						linux,default-trigger = "mmc0";
+						default-state = "off";
+					};
+					led@08.2 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x04>;
+						label = "vexpress:2";
+						linux,default-trigger = "cpu0";
+						default-state = "off";
+					};
+					led@08.3 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x08>;
+						label = "vexpress:3";
+						linux,default-trigger = "cpu1";
+						default-state = "off";
+					};
+					led@08.4 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x10>;
+						label = "vexpress:4";
+						linux,default-trigger = "cpu2";
+						default-state = "off";
+					};
+					led@08.5 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x20>;
+						label = "vexpress:5";
+						linux,default-trigger = "cpu3";
+						default-state = "off";
+					};
+					led@08.6 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x40>;
+						label = "vexpress:6";
+						default-state = "off";
+					};
+					led@08.7 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x80>;
+						label = "vexpress:7";
+						default-state = "off";
+					};
+				};
+
 				mmci@050000 {
 					compatible = "arm,pl180", "arm,primecell";
 					reg = <0x050000 0x1000>;

arch/arm64/configs/defconfig

@@ -139,6 +139,12 @@ CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_EFI=y
 CONFIG_RTC_DRV_XGENE=y

drivers/bus/Kconfig

@@ -7,21 +7,24 @@ menu "Bus devices"
 config ARM_CCI
 	bool
 
+config ARM_CCI_PMU
+	bool
+	select ARM_CCI
+
 config ARM_CCI400_COMMON
 	bool
 	select ARM_CCI
 
 config ARM_CCI400_PMU
 	bool "ARM CCI400 PMU support"
-	default y
-	depends on ARM || ARM64
-	depends on HW_PERF_EVENTS
+	depends on (ARM && CPU_V7) || ARM64
+	depends on PERF_EVENTS
 	select ARM_CCI400_COMMON
+	select ARM_CCI_PMU
 	help
-	  Support for PMU events monitoring on the ARM CCI cache coherent
-	  interconnect.
-
-	  If unsure, say Y
+	  Support for PMU events monitoring on the ARM CCI-400 (cache coherent
+	  interconnect). CCI-400 supports counting events related to the
+	  connected slave/master interfaces.
 
 config ARM_CCI400_PORT_CTRL
 	bool
@@ -31,6 +34,20 @@ config ARM_CCI400_PORT_CTRL
 	  Low level power management driver for CCI400 cache coherent
 	  interconnect for ARM platforms.
 
+config ARM_CCI500_PMU
+	bool "ARM CCI500 PMU support"
+	default y
+	depends on (ARM && CPU_V7) || ARM64
+	depends on PERF_EVENTS
+	select ARM_CCI_PMU
+	help
+	  Support for PMU events monitoring on the ARM CCI-500 cache coherent
+	  interconnect. CCI-500 provides 8 independent event counters, which
+	  can count events pertaining to the slave/master interfaces as well
+	  as the internal events to the CCI.
+
+	  If unsure, say Y
+
 config ARM_CCN
 	bool "ARM CCN driver support"
 	depends on ARM || ARM64

drivers/clk/berlin/bg2.c

@@ -502,12 +502,13 @@ static const struct berlin2_gate_data bg2_gates[] __initconst = {
 
 static void __init berlin2_clock_setup(struct device_node *np)
 {
+	struct device_node *parent_np = of_get_parent(np);
 	const char *parent_names[9];
 	struct clk *clk;
 	u8 avpll_flags = 0;
 	int n;
 
-	gbase = of_iomap(np, 0);
+	gbase = of_iomap(parent_np, 0);
 	if (!gbase)
 		return;
 
@@ -685,7 +686,5 @@ static void __init berlin2_clock_setup(struct device_node *np)
 bg2_fail:
 	iounmap(gbase);
 }
-CLK_OF_DECLARE(berlin2_clock, "marvell,berlin2-chip-ctrl",
-	       berlin2_clock_setup);
-CLK_OF_DECLARE(berlin2cd_clock, "marvell,berlin2cd-chip-ctrl",
+CLK_OF_DECLARE(berlin2_clk, "marvell,berlin2-clk",
 	       berlin2_clock_setup);

drivers/clk/berlin/bg2q.c

@@ -290,18 +290,19 @@ static const struct berlin2_gate_data bg2q_gates[] __initconst = {
 
 static void __init berlin2q_clock_setup(struct device_node *np)
 {
+	struct device_node *parent_np = of_get_parent(np);
 	const char *parent_names[9];
 	struct clk *clk;
 	int n;
 
-	gbase = of_iomap(np, 0);
+	gbase = of_iomap(parent_np, 0);
 	if (!gbase) {
 		pr_err("%s: Unable to map global base\n", np->full_name);
 		return;
 	}
 
 	/* BG2Q CPU PLL is not part of global registers */
-	cpupll_base = of_iomap(np, 1);
+	cpupll_base = of_iomap(parent_np, 1);
 	if (!cpupll_base) {
 		pr_err("%s: Unable to map cpupll base\n", np->full_name);
 		iounmap(gbase);
@@ -384,5 +385,5 @@ static void __init berlin2q_clock_setup(struct device_node *np)
 	iounmap(cpupll_base);
 	iounmap(gbase);
 }
-CLK_OF_DECLARE(berlin2q_clock, "marvell,berlin2q-chip-ctrl",
+CLK_OF_DECLARE(berlin2q_clk, "marvell,berlin2q-clk",
 	       berlin2q_clock_setup);

drivers/firmware/Makefile

@@ -12,7 +12,8 @@ obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
 obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o
-CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+obj-$(CONFIG_QCOM_SCM)		+= qcom_scm-32.o
+CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
 
 obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
 obj-$(CONFIG_EFI)		+= efi/

drivers/firmware/qcom_scm.h

+/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_SCM_INT_H
+#define __QCOM_SCM_INT_H
+
+#define QCOM_SCM_SVC_BOOT		0x1
+#define QCOM_SCM_BOOT_ADDR		0x1
+#define QCOM_SCM_BOOT_ADDR_MC		0x11
+
+#define QCOM_SCM_FLAG_HLOS		0x01
+#define QCOM_SCM_FLAG_COLDBOOT_MC	0x02
+#define QCOM_SCM_FLAG_WARMBOOT_MC	0x04
+extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
+
+#define QCOM_SCM_CMD_TERMINATE_PC	0x2
+#define QCOM_SCM_FLUSH_FLAG_MASK	0x3
+#define QCOM_SCM_CMD_CORE_HOTPLUGGED	0x10
+extern void __qcom_scm_cpu_power_down(u32 flags);
+
+#define QCOM_SCM_SVC_INFO		0x6
+#define QCOM_IS_CALL_AVAIL_CMD		0x1
+extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id);
+
+#define QCOM_SCM_SVC_HDCP		0x11
+#define QCOM_SCM_CMD_HDCP		0x01
+extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+		u32 *resp);
+
+/* common error codes */
+#define QCOM_SCM_ENOMEM		-5
+#define QCOM_SCM_EOPNOTSUPP	-4
+#define QCOM_SCM_EINVAL_ADDR	-3
+#define QCOM_SCM_EINVAL_ARG	-2
+#define QCOM_SCM_ERROR		-1
+#define QCOM_SCM_INTERRUPTED	1
+
+#endif

drivers/iommu/Kconfig

@@ -219,7 +219,7 @@ config TEGRA_IOMMU_SMMU
 	select IOMMU_API
 	help
 	  This driver supports the IOMMU hardware (SMMU) found on NVIDIA Tegra
-	  SoCs (Tegra30 up to Tegra124).
+	  SoCs (Tegra30 up to Tegra132).
 
 config EXYNOS_IOMMU
 	bool "Exynos IOMMU Support"

drivers/iommu/tegra-smmu.c

@@ -7,6 +7,7 @@
  */
 
 #include <linux/bitops.h>
+#include <linux/debugfs.h>
 #include <linux/err.h>
 #include <linux/iommu.h>
 #include <linux/kernel.h>
@@ -31,6 +32,8 @@ struct tegra_smmu {
 	struct mutex lock;
 
 	struct list_head list;
+
+	struct dentry *debugfs;
 };
 
 struct tegra_smmu_as {
@@ -673,6 +676,103 @@ static void tegra_smmu_ahb_enable(void)
 	}
 }
 
+static int tegra_smmu_swgroups_show(struct seq_file *s, void *data)
+{
+	struct tegra_smmu *smmu = s->private;
+	unsigned int i;
+	u32 value;
+
+	seq_printf(s, "swgroup    enabled  ASID\n");
+	seq_printf(s, "------------------------\n");
+
+	for (i = 0; i < smmu->soc->num_swgroups; i++) {
+		const struct tegra_smmu_swgroup *group = &smmu->soc->swgroups[i];
+		const char *status;
+		unsigned int asid;
+
+		value = smmu_readl(smmu, group->reg);
+
+		if (value & SMMU_ASID_ENABLE)
+			status = "yes";
+		else
+			status = "no";
+
+		asid = value & SMMU_ASID_MASK;
+
+		seq_printf(s, "%-9s  %-7s  %#04x\n", group->name, status,
+			   asid);
+	}
+
+	return 0;
+}
+
+static int tegra_smmu_swgroups_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, tegra_smmu_swgroups_show, inode->i_private);
+}
+
+static const struct file_operations tegra_smmu_swgroups_fops = {
+	.open = tegra_smmu_swgroups_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static int tegra_smmu_clients_show(struct seq_file *s, void *data)
+{
+	struct tegra_smmu *smmu = s->private;
+	unsigned int i;
+	u32 value;
+
+	seq_printf(s, "client       enabled\n");
+	seq_printf(s, "--------------------\n");
+
+	for (i = 0; i < smmu->soc->num_clients; i++) {
+		const struct tegra_mc_client *client = &smmu->soc->clients[i];
+		const char *status;
+
+		value = smmu_readl(smmu, client->smmu.reg);
+
+		if (value & BIT(client->smmu.bit))
+			status = "yes";
+		else
+			status = "no";
+
+		seq_printf(s, "%-12s %s\n", client->name, status);
+	}
+
+	return 0;
+}
+
+static int tegra_smmu_clients_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, tegra_smmu_clients_show, inode->i_private);
+}
+
+static const struct file_operations tegra_smmu_clients_fops = {
+	.open = tegra_smmu_clients_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void tegra_smmu_debugfs_init(struct tegra_smmu *smmu)
+{
+	smmu->debugfs = debugfs_create_dir("smmu", NULL);
+	if (!smmu->debugfs)
+		return;
+
+	debugfs_create_file("swgroups", S_IRUGO, smmu->debugfs, smmu,
+			    &tegra_smmu_swgroups_fops);
+	debugfs_create_file("clients", S_IRUGO, smmu->debugfs, smmu,
+			    &tegra_smmu_clients_fops);
+}
+
+static void tegra_smmu_debugfs_exit(struct tegra_smmu *smmu)
+{
+	debugfs_remove_recursive(smmu->debugfs);
+}
+
 struct tegra_smmu *tegra_smmu_probe(struct device *dev,
 				    const struct tegra_smmu_soc *soc,
 				    struct tegra_mc *mc)
@@ -743,5 +843,14 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev,
 	if (err < 0)
 		return ERR_PTR(err);
 
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		tegra_smmu_debugfs_init(smmu);
+
 	return smmu;
 }
+
+void tegra_smmu_remove(struct tegra_smmu *smmu)
+{
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		tegra_smmu_debugfs_exit(smmu);
+}

drivers/leds/leds-syscon.c

@@ -20,6 +20,7 @@
  * MA 02111-1307 USA
  */
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
@@ -66,102 +67,101 @@ static void syscon_led_set(struct led_classdev *led_cdev,
 		dev_err(sled->cdev.dev, "error updating LED status\n");
 }
 
-static int __init syscon_leds_spawn(struct device_node *np,
-				    struct device *dev,
-				    struct regmap *map)
+static int syscon_led_probe(struct platform_device *pdev)
 {
-	struct device_node *child;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device *parent;
+	struct regmap *map;
+	struct syscon_led *sled;
+	const char *state;
 	int ret;
 
-	for_each_available_child_of_node(np, child) {
-		struct syscon_led *sled;
-		const char *state;
-
-		/* Only check for register-bit-leds */
-		if (of_property_match_string(child, "compatible",
-					     "register-bit-led") < 0)
-			continue;
-
-		sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
-		if (!sled)
-			return -ENOMEM;
-
-		sled->map = map;
-
-		if (of_property_read_u32(child, "offset", &sled->offset))
-			return -EINVAL;
-		if (of_property_read_u32(child, "mask", &sled->mask))
-			return -EINVAL;
-		sled->cdev.name =
-			of_get_property(child, "label", NULL) ? : child->name;
-		sled->cdev.default_trigger =
-			of_get_property(child, "linux,default-trigger", NULL);
-
-		state = of_get_property(child, "default-state", NULL);
-		if (state) {
-			if (!strcmp(state, "keep")) {
-				u32 val;
-
-				ret = regmap_read(map, sled->offset, &val);
-				if (ret < 0)
-					return ret;
-				sled->state = !!(val & sled->mask);
-			} else if (!strcmp(state, "on")) {
-				sled->state = true;
-				ret = regmap_update_bits(map, sled->offset,
-							 sled->mask,
-							 sled->mask);
-				if (ret < 0)
-					return ret;
-			} else {
-				sled->state = false;
-				ret = regmap_update_bits(map, sled->offset,
-							 sled->mask, 0);
-				if (ret < 0)
-					return ret;
-			}
+	parent = dev->parent;
+	if (!parent) {
+		dev_err(dev, "no parent for syscon LED\n");
+		return -ENODEV;
+	}
+	map = syscon_node_to_regmap(parent->of_node);
+	if (!map) {
+		dev_err(dev, "no regmap for syscon LED parent\n");
+		return -ENODEV;
+	}
+
+	sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
+	if (!sled)
+		return -ENOMEM;
+
+	sled->map = map;
+
+	if (of_property_read_u32(np, "offset", &sled->offset))
+		return -EINVAL;
+	if (of_property_read_u32(np, "mask", &sled->mask))
+		return -EINVAL;
+	sled->cdev.name =
+		of_get_property(np, "label", NULL) ? : np->name;
+	sled->cdev.default_trigger =
+		of_get_property(np, "linux,default-trigger", NULL);
+
+	state = of_get_property(np, "default-state", NULL);
+	if (state) {
+		if (!strcmp(state, "keep")) {
+			u32 val;
+
+			ret = regmap_read(map, sled->offset, &val);
+			if (ret < 0)
+				return ret;
+			sled->state = !!(val & sled->mask);
+		} else if (!strcmp(state, "on")) {
+			sled->state = true;
+			ret = regmap_update_bits(map, sled->offset,
+						 sled->mask,
+						 sled->mask);
+			if (ret < 0)
+				return ret;
+		} else {
+			sled->state = false;
+			ret = regmap_update_bits(map, sled->offset,
+						 sled->mask, 0);
+			if (ret < 0)
+				return ret;
 		}
-		sled->cdev.brightness_set = syscon_led_set;
+	}
+	sled->cdev.brightness_set = syscon_led_set;
 
-		ret = led_classdev_register(dev, &sled->cdev);
-		if (ret < 0)
-			return ret;
+	ret = led_classdev_register(dev, &sled->cdev);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, sled);
+	dev_info(dev, "registered LED %s\n", sled->cdev.name);
 
-		dev_info(dev, "registered LED %s\n", sled->cdev.name);
-	}
 	return 0;
 }
 
-static int __init syscon_leds_init(void)
+static int syscon_led_remove(struct platform_device *pdev)
 {
-	struct device_node *np;
-
-	for_each_of_allnodes(np) {
-		struct platform_device *pdev;
-		struct regmap *map;
-		int ret;
+	struct syscon_led *sled = platform_get_drvdata(pdev);
 
-		if (!of_device_is_compatible(np, "syscon"))
-			continue;
+	led_classdev_unregister(&sled->cdev);
+	/* Turn it off */
+	regmap_update_bits(sled->map, sled->offset, sled->mask, 0);
+	return 0;
+}
 
-		map = syscon_node_to_regmap(np);
-		if (IS_ERR(map)) {
-			pr_err("error getting regmap for syscon LEDs\n");
-			continue;
-		}
+static const struct of_device_id of_syscon_leds_match[] = {
+	{ .compatible = "register-bit-led", },
+	{},
+};
 
-		/*
-		 * If the map is there, the device should be there, we allocate
-		 * memory on the syscon device's behalf here.
-		 */
-		pdev = of_find_device_by_node(np);
-		if (!pdev)
-			return -ENODEV;
-		ret = syscon_leds_spawn(np, &pdev->dev, map);
-		if (ret)
-			dev_err(&pdev->dev, "could not spawn syscon LEDs\n");
-	}
+MODULE_DEVICE_TABLE(of, of_syscon_leds_match);
 
-	return 0;
-}
-device_initcall(syscon_leds_init);
+static struct platform_driver syscon_led_driver = {
+	.probe		= syscon_led_probe,
+	.remove		= syscon_led_remove,
+	.driver		= {
+		.name	= "leds-syscon",
+		.of_match_table = of_syscon_leds_match,
+	},
+};
+module_platform_driver(syscon_led_driver);

drivers/memory/tegra/Kconfig

@@ -5,3 +5,13 @@ config TEGRA_MC
 	help
 	  This driver supports the Memory Controller (MC) hardware found on
 	  NVIDIA Tegra SoCs.
+
+config TEGRA124_EMC
+	bool "NVIDIA Tegra124 External Memory Controller driver"
+	default y
+	depends on TEGRA_MC && ARCH_TEGRA_124_SOC
+	help
+	  This driver is for the External Memory Controller (EMC) found on
+	  Tegra124 chips. The EMC controls the external DRAM on the board.
+	  This driver is required to change memory timings / clock rate for
+	  external memory.

drivers/memory/tegra/Makefile

@@ -3,5 +3,8 @@ tegra-mc-y := mc.o
 tegra-mc-$(CONFIG_ARCH_TEGRA_3x_SOC)  += tegra30.o
 tegra-mc-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114.o
 tegra-mc-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra124.o
 
 obj-$(CONFIG_TEGRA_MC) += tegra-mc.o
+
+obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o

drivers/memory/tegra/mc.c

@@ -13,6 +13,9 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/sort.h>
+
+#include <soc/tegra/fuse.h>
 
 #include "mc.h"
 
@@ -48,6 +51,9 @@
 #define  MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK	0x1ff
 #define MC_EMEM_ARB_MISC0 0xd8
 
+#define MC_EMEM_ADR_CFG 0x54
+#define MC_EMEM_ADR_CFG_EMEM_NUMDEV BIT(0)
+
 static const struct of_device_id tegra_mc_of_match[] = {
 #ifdef CONFIG_ARCH_TEGRA_3x_SOC
 	{ .compatible = "nvidia,tegra30-mc", .data = &tegra30_mc_soc },
@@ -57,6 +63,9 @@ static const struct of_device_id tegra_mc_of_match[] = {
 #endif
 #ifdef CONFIG_ARCH_TEGRA_124_SOC
 	{ .compatible = "nvidia,tegra124-mc", .data = &tegra124_mc_soc },
+#endif
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+	{ .compatible = "nvidia,tegra132-mc", .data = &tegra132_mc_soc },
 #endif
 	{ }
 };
@@ -91,6 +100,130 @@ static int tegra_mc_setup_latency_allowance(struct tegra_mc *mc)
 	return 0;
 }
 
+void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate)
+{
+	unsigned int i;
+	struct tegra_mc_timing *timing = NULL;
+
+	for (i = 0; i < mc->num_timings; i++) {
+		if (mc->timings[i].rate == rate) {
+			timing = &mc->timings[i];
+			break;
+		}
+	}
+
+	if (!timing) {
+		dev_err(mc->dev, "no memory timing registered for rate %lu\n",
+			rate);
+		return;
+	}
+
+	for (i = 0; i < mc->soc->num_emem_regs; ++i)
+		mc_writel(mc, timing->emem_data[i], mc->soc->emem_regs[i]);
+}
+
+unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc)
+{
+	u8 dram_count;
+
+	dram_count = mc_readl(mc, MC_EMEM_ADR_CFG);
+	dram_count &= MC_EMEM_ADR_CFG_EMEM_NUMDEV;
+	dram_count++;
+
+	return dram_count;
+}
+
+static int load_one_timing(struct tegra_mc *mc,
+			   struct tegra_mc_timing *timing,
+			   struct device_node *node)
+{
+	int err;
+	u32 tmp;
+
+	err = of_property_read_u32(node, "clock-frequency", &tmp);
+	if (err) {
+		dev_err(mc->dev,
+			"timing %s: failed to read rate\n", node->name);
+		return err;
+	}
+
+	timing->rate = tmp;
+	timing->emem_data = devm_kcalloc(mc->dev, mc->soc->num_emem_regs,
+					 sizeof(u32), GFP_KERNEL);
+	if (!timing->emem_data)
+		return -ENOMEM;
+
+	err = of_property_read_u32_array(node, "nvidia,emem-configuration",
+					 timing->emem_data,
+					 mc->soc->num_emem_regs);
+	if (err) {
+		dev_err(mc->dev,
+			"timing %s: failed to read EMEM configuration\n",
+			node->name);
+		return err;
+	}
+
+	return 0;
+}
+
+static int load_timings(struct tegra_mc *mc, struct device_node *node)
+{
+	struct device_node *child;
+	struct tegra_mc_timing *timing;
+	int child_count = of_get_child_count(node);
+	int i = 0, err;
+
+	mc->timings = devm_kcalloc(mc->dev, child_count, sizeof(*timing),
+				   GFP_KERNEL);
+	if (!mc->timings)
+		return -ENOMEM;
+
+	mc->num_timings = child_count;
+
+	for_each_child_of_node(node, child) {
+		timing = &mc->timings[i++];
+
+		err = load_one_timing(mc, timing, child);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int tegra_mc_setup_timings(struct tegra_mc *mc)
+{
+	struct device_node *node;
+	u32 ram_code, node_ram_code;
+	int err;
+
+	ram_code = tegra_read_ram_code();
+
+	mc->num_timings = 0;
+
+	for_each_child_of_node(mc->dev->of_node, node) {
+		err = of_property_read_u32(node, "nvidia,ram-code",
+					   &node_ram_code);
+		if (err || (node_ram_code != ram_code)) {
+			of_node_put(node);
+			continue;
+		}
+
+		err = load_timings(mc, node);
+		if (err)
+			return err;
+		of_node_put(node);
+		break;
+	}
+
+	if (mc->num_timings == 0)
+		dev_warn(mc->dev,
+			 "no memory timings for RAM code %u registered\n",
+			 ram_code);
+
+	return 0;
+}
+
 static const char *const status_names[32] = {
 	[ 1] = "External interrupt",
 	[ 6] = "EMEM address decode error",
@@ -248,6 +381,12 @@ static int tegra_mc_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	err = tegra_mc_setup_timings(mc);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to setup timings: %d\n", err);
+		return err;
+	}
+
 	if (IS_ENABLED(CONFIG_TEGRA_IOMMU_SMMU)) {
 		mc->smmu = tegra_smmu_probe(&pdev->dev, mc->soc->smmu, mc);
 		if (IS_ERR(mc->smmu)) {
@@ -273,8 +412,8 @@ static int tegra_mc_probe(struct platform_device *pdev)
 
 	value = MC_INT_DECERR_MTS | MC_INT_SECERR_SEC | MC_INT_DECERR_VPR |
 		MC_INT_INVALID_APB_ASID_UPDATE | MC_INT_INVALID_SMMU_PAGE |
-		MC_INT_ARBITRATION_EMEM | MC_INT_SECURITY_VIOLATION |
-		MC_INT_DECERR_EMEM;
+		MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM;
+
 	mc_writel(mc, value, MC_INTMASK);
 
 	return 0;

drivers/memory/tegra/mc.h

@@ -37,4 +37,8 @@ extern const struct tegra_mc_soc tegra114_mc_soc;
 extern const struct tegra_mc_soc tegra124_mc_soc;
 #endif
 
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+extern const struct tegra_mc_soc tegra132_mc_soc;
+#endif
+
 #endif /* MEMORY_TEGRA_MC_H */

drivers/memory/tegra/tegra114.c

@@ -896,22 +896,22 @@ static const struct tegra_mc_client tegra114_mc_clients[] = {
 };
 
 static const struct tegra_smmu_swgroup tegra114_swgroups[] = {
-	{ .swgroup = TEGRA_SWGROUP_DC,        .reg = 0x240 },
-	{ .swgroup = TEGRA_SWGROUP_DCB,       .reg = 0x244 },
-	{ .swgroup = TEGRA_SWGROUP_EPP,       .reg = 0x248 },
-	{ .swgroup = TEGRA_SWGROUP_G2,        .reg = 0x24c },
-	{ .swgroup = TEGRA_SWGROUP_AVPC,      .reg = 0x23c },
-	{ .swgroup = TEGRA_SWGROUP_NV,        .reg = 0x268 },
-	{ .swgroup = TEGRA_SWGROUP_HDA,       .reg = 0x254 },
-	{ .swgroup = TEGRA_SWGROUP_HC,        .reg = 0x250 },
-	{ .swgroup = TEGRA_SWGROUP_MSENC,     .reg = 0x264 },
-	{ .swgroup = TEGRA_SWGROUP_PPCS,      .reg = 0x270 },
-	{ .swgroup = TEGRA_SWGROUP_VDE,       .reg = 0x27c },
-	{ .swgroup = TEGRA_SWGROUP_VI,        .reg = 0x280 },
-	{ .swgroup = TEGRA_SWGROUP_ISP,       .reg = 0x258 },
-	{ .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
-	{ .swgroup = TEGRA_SWGROUP_XUSB_DEV,  .reg = 0x28c },
-	{ .swgroup = TEGRA_SWGROUP_TSEC,      .reg = 0x294 },
+	{ .name = "dc",        .swgroup = TEGRA_SWGROUP_DC,        .reg = 0x240 },
+	{ .name = "dcb",       .swgroup = TEGRA_SWGROUP_DCB,       .reg = 0x244 },
+	{ .name = "epp",       .swgroup = TEGRA_SWGROUP_EPP,       .reg = 0x248 },
+	{ .name = "g2",        .swgroup = TEGRA_SWGROUP_G2,        .reg = 0x24c },
+	{ .name = "avpc",      .swgroup = TEGRA_SWGROUP_AVPC,      .reg = 0x23c },
+	{ .name = "nv",        .swgroup = TEGRA_SWGROUP_NV,        .reg = 0x268 },
+	{ .name = "hda",       .swgroup = TEGRA_SWGROUP_HDA,       .reg = 0x254 },
+	{ .name = "hc",        .swgroup = TEGRA_SWGROUP_HC,        .reg = 0x250 },
+	{ .name = "msenc",     .swgroup = TEGRA_SWGROUP_MSENC,     .reg = 0x264 },
+	{ .name = "ppcs",      .swgroup = TEGRA_SWGROUP_PPCS,      .reg = 0x270 },
+	{ .name = "vde",       .swgroup = TEGRA_SWGROUP_VDE,       .reg = 0x27c },
+	{ .name = "vi",        .swgroup = TEGRA_SWGROUP_VI,        .reg = 0x280 },
+	{ .name = "isp",       .swgroup = TEGRA_SWGROUP_ISP,       .reg = 0x258 },
+	{ .name = "xusb_host", .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
+	{ .name = "xusb_dev",  .swgroup = TEGRA_SWGROUP_XUSB_DEV,  .reg = 0x28c },
+	{ .name = "tsec",      .swgroup = TEGRA_SWGROUP_TSEC,      .reg = 0x294 },
 };
 
 static void tegra114_flush_dcache(struct page *page, unsigned long offset,

drivers/memory/tegra/tegra124.c

@@ -15,6 +15,48 @@
 
 #include "mc.h"
 
+#define MC_EMEM_ARB_CFG				0x90
+#define MC_EMEM_ARB_OUTSTANDING_REQ		0x94
+#define MC_EMEM_ARB_TIMING_RCD			0x98
+#define MC_EMEM_ARB_TIMING_RP			0x9c
+#define MC_EMEM_ARB_TIMING_RC			0xa0
+#define MC_EMEM_ARB_TIMING_RAS			0xa4
+#define MC_EMEM_ARB_TIMING_FAW			0xa8
+#define MC_EMEM_ARB_TIMING_RRD			0xac
+#define MC_EMEM_ARB_TIMING_RAP2PRE		0xb0
+#define MC_EMEM_ARB_TIMING_WAP2PRE		0xb4
+#define MC_EMEM_ARB_TIMING_R2R			0xb8
+#define MC_EMEM_ARB_TIMING_W2W			0xbc
+#define MC_EMEM_ARB_TIMING_R2W			0xc0
+#define MC_EMEM_ARB_TIMING_W2R			0xc4
+#define MC_EMEM_ARB_DA_TURNS			0xd0
+#define MC_EMEM_ARB_DA_COVERS			0xd4
+#define MC_EMEM_ARB_MISC0			0xd8
+#define MC_EMEM_ARB_MISC1			0xdc
+#define MC_EMEM_ARB_RING1_THROTTLE		0xe0
+
+static const unsigned long tegra124_mc_emem_regs[] = {
+	MC_EMEM_ARB_CFG,
+	MC_EMEM_ARB_OUTSTANDING_REQ,
+	MC_EMEM_ARB_TIMING_RCD,
+	MC_EMEM_ARB_TIMING_RP,
+	MC_EMEM_ARB_TIMING_RC,
+	MC_EMEM_ARB_TIMING_RAS,
+	MC_EMEM_ARB_TIMING_FAW,
+	MC_EMEM_ARB_TIMING_RRD,
+	MC_EMEM_ARB_TIMING_RAP2PRE,
+	MC_EMEM_ARB_TIMING_WAP2PRE,
+	MC_EMEM_ARB_TIMING_R2R,
+	MC_EMEM_ARB_TIMING_W2W,
+	MC_EMEM_ARB_TIMING_R2W,
+	MC_EMEM_ARB_TIMING_W2R,
+	MC_EMEM_ARB_DA_TURNS,
+	MC_EMEM_ARB_DA_COVERS,
+	MC_EMEM_ARB_MISC0,
+	MC_EMEM_ARB_MISC1,
+	MC_EMEM_ARB_RING1_THROTTLE
+};
+
 static const struct tegra_mc_client tegra124_mc_clients[] = {
 	{
 		.id = 0x00,
@@ -934,29 +976,29 @@ static const struct tegra_mc_client tegra124_mc_clients[] = {
 };
 
 static const struct tegra_smmu_swgroup tegra124_swgroups[] = {
-	{ .swgroup = TEGRA_SWGROUP_DC,        .reg = 0x240 },
-	{ .swgroup = TEGRA_SWGROUP_DCB,       .reg = 0x244 },
-	{ .swgroup = TEGRA_SWGROUP_AFI,       .reg = 0x238 },
-	{ .swgroup = TEGRA_SWGROUP_AVPC,      .reg = 0x23c },
-	{ .swgroup = TEGRA_SWGROUP_HDA,       .reg = 0x254 },
-	{ .swgroup = TEGRA_SWGROUP_HC,        .reg = 0x250 },
-	{ .swgroup = TEGRA_SWGROUP_MSENC,     .reg = 0x264 },
-	{ .swgroup = TEGRA_SWGROUP_PPCS,      .reg = 0x270 },
-	{ .swgroup = TEGRA_SWGROUP_SATA,      .reg = 0x274 },
-	{ .swgroup = TEGRA_SWGROUP_VDE,       .reg = 0x27c },
-	{ .swgroup = TEGRA_SWGROUP_ISP2,      .reg = 0x258 },
-	{ .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
-	{ .swgroup = TEGRA_SWGROUP_XUSB_DEV,  .reg = 0x28c },
-	{ .swgroup = TEGRA_SWGROUP_ISP2B,     .reg = 0xaa4 },
-	{ .swgroup = TEGRA_SWGROUP_TSEC,      .reg = 0x294 },
-	{ .swgroup = TEGRA_SWGROUP_A9AVP,     .reg = 0x290 },
-	{ .swgroup = TEGRA_SWGROUP_GPU,       .reg = 0xaac },
-	{ .swgroup = TEGRA_SWGROUP_SDMMC1A,   .reg = 0xa94 },
-	{ .swgroup = TEGRA_SWGROUP_SDMMC2A,   .reg = 0xa98 },
-	{ .swgroup = TEGRA_SWGROUP_SDMMC3A,   .reg = 0xa9c },
-	{ .swgroup = TEGRA_SWGROUP_SDMMC4A,   .reg = 0xaa0 },
-	{ .swgroup = TEGRA_SWGROUP_VIC,       .reg = 0x284 },
-	{ .swgroup = TEGRA_SWGROUP_VI,        .reg = 0x280 },
+	{ .name = "dc",        .swgroup = TEGRA_SWGROUP_DC,        .reg = 0x240 },
+	{ .name = "dcb",       .swgroup = TEGRA_SWGROUP_DCB,       .reg = 0x244 },
+	{ .name = "afi",       .swgroup = TEGRA_SWGROUP_AFI,       .reg = 0x238 },
+	{ .name = "avpc",      .swgroup = TEGRA_SWGROUP_AVPC,      .reg = 0x23c },
+	{ .name = "hda",       .swgroup = TEGRA_SWGROUP_HDA,       .reg = 0x254 },
+	{ .name = "hc",        .swgroup = TEGRA_SWGROUP_HC,        .reg = 0x250 },
+	{ .name = "msenc",     .swgroup = TEGRA_SWGROUP_MSENC,     .reg = 0x264 },
+	{ .name = "ppcs",      .swgroup = TEGRA_SWGROUP_PPCS,      .reg = 0x270 },
+	{ .name = "sata",      .swgroup = TEGRA_SWGROUP_SATA,      .reg = 0x274 },
+	{ .name = "vde",       .swgroup = TEGRA_SWGROUP_VDE,       .reg = 0x27c },
+	{ .name = "isp2",      .swgroup = TEGRA_SWGROUP_ISP2,      .reg = 0x258 },
+	{ .name = "xusb_host", .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
+	{ .name = "xusb_dev",  .swgroup = TEGRA_SWGROUP_XUSB_DEV,  .reg = 0x28c },
+	{ .name = "isp2b",     .swgroup = TEGRA_SWGROUP_ISP2B,     .reg = 0xaa4 },
+	{ .name = "tsec",      .swgroup = TEGRA_SWGROUP_TSEC,      .reg = 0x294 },
+	{ .name = "a9avp",     .swgroup = TEGRA_SWGROUP_A9AVP,     .reg = 0x290 },
+	{ .name = "gpu",       .swgroup = TEGRA_SWGROUP_GPU,       .reg = 0xaac },
+	{ .name = "sdmmc1a",   .swgroup = TEGRA_SWGROUP_SDMMC1A,   .reg = 0xa94 },
+	{ .name = "sdmmc2a",   .swgroup = TEGRA_SWGROUP_SDMMC2A,   .reg = 0xa98 },
+	{ .name = "sdmmc3a",   .swgroup = TEGRA_SWGROUP_SDMMC3A,   .reg = 0xa9c },
+	{ .name = "sdmmc4a",   .swgroup = TEGRA_SWGROUP_SDMMC4A,   .reg = 0xaa0 },
+	{ .name = "vic",       .swgroup = TEGRA_SWGROUP_VIC,       .reg = 0x284 },
+	{ .name = "vi",        .swgroup = TEGRA_SWGROUP_VI,        .reg = 0x280 },
 };
 
 #ifdef CONFIG_ARCH_TEGRA_124_SOC
@@ -991,5 +1033,40 @@ const struct tegra_mc_soc tegra124_mc_soc = {
 	.num_address_bits = 34,
 	.atom_size = 32,
 	.smmu = &tegra124_smmu_soc,
+	.emem_regs = tegra124_mc_emem_regs,
+	.num_emem_regs = ARRAY_SIZE(tegra124_mc_emem_regs),
 };
 #endif /* CONFIG_ARCH_TEGRA_124_SOC */
+
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+static void tegra132_flush_dcache(struct page *page, unsigned long offset,
+				  size_t size)
+{
+	void *virt = page_address(page) + offset;
+
+	__flush_dcache_area(virt, size);
+}
+
+static const struct tegra_smmu_ops tegra132_smmu_ops = {
+	.flush_dcache = tegra132_flush_dcache,
+};
+
+static const struct tegra_smmu_soc tegra132_smmu_soc = {
+	.clients = tegra124_mc_clients,
+	.num_clients = ARRAY_SIZE(tegra124_mc_clients),
+	.swgroups = tegra124_swgroups,
+	.num_swgroups = ARRAY_SIZE(tegra124_swgroups),
+	.supports_round_robin_arbitration = true,
+	.supports_request_limit = true,
+	.num_asids = 128,
+	.ops = &tegra132_smmu_ops,
+};
+
+const struct tegra_mc_soc tegra132_mc_soc = {
+	.clients = tegra124_mc_clients,
+	.num_clients = ARRAY_SIZE(tegra124_mc_clients),
+	.num_address_bits = 34,
+	.atom_size = 32,
+	.smmu = &tegra132_smmu_soc,
+};
+#endif /* CONFIG_ARCH_TEGRA_132_SOC */

drivers/soc/sunxi/Makefile

+obj-$(CONFIG_SUNXI_SRAM) +=	sunxi_sram.o