iwlwifi: yoyo: add PCI config space region type

Add a new region type that allows us to dump the PCI config space.
This is mostly the same as dumping a memory region, but reading from
the device's config space instead.

In order to make this generic and independent of the trans type, we
make a function called iwl_dump_ini_config_iter() that calls a new op
in the transport to read its config space.

Change-Id: I15151bddf589f13b0e0a45c28b96bbcd73bcfdeb
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

drivers/net/wireless/intel/iwlwifi/fw/dbg.c

@@ -1108,6 +1108,38 @@ static int iwl_dump_ini_csr_iter(struct iwl_fw_runtime *fwrt,
 	return sizeof(*range) + le32_to_cpu(range->range_data_size);
 }
 
+static int iwl_dump_ini_config_iter(struct iwl_fw_runtime *fwrt,
+				    struct iwl_dump_ini_region_data *reg_data,
+				    void *range_ptr, int idx)
+{
+	struct iwl_trans *trans = fwrt->trans;
+	struct iwl_fw_ini_region_tlv *reg = (void *)reg_data->reg_tlv->data;
+	struct iwl_fw_ini_error_dump_range *range = range_ptr;
+	__le32 *val = range->data;
+	u32 addr = le32_to_cpu(reg->addrs[idx]) +
+		   le32_to_cpu(reg->dev_addr.offset);
+	int i;
+
+	/* we shouldn't get here if the trans doesn't have read_config32 */
+	if (WARN_ON_ONCE(!trans->ops->read_config32))
+		return -EOPNOTSUPP;
+
+	range->internal_base_addr = cpu_to_le32(addr);
+	range->range_data_size = reg->dev_addr.size;
+	for (i = 0; i < le32_to_cpu(reg->dev_addr.size); i += 4) {
+		int ret;
+		u32 tmp;
+
+		ret = trans->ops->read_config32(trans, addr + i, &tmp);
+		if (ret < 0)
+			return ret;
+
+		*val++ = cpu_to_le32(tmp);
+	}
+
+	return sizeof(*range) + le32_to_cpu(range->range_data_size);
+}
+
 static int iwl_dump_ini_dev_mem_iter(struct iwl_fw_runtime *fwrt,
 				     struct iwl_dump_ini_region_data *reg_data,
 				     void *range_ptr, int idx)
@@ -2052,7 +2084,12 @@ static const struct iwl_dump_ini_mem_ops iwl_dump_ini_region_ops[] = {
 		.fill_range = iwl_dump_ini_csr_iter,
 	},
 	[IWL_FW_INI_REGION_DRAM_IMR] = {},
-	[IWL_FW_INI_REGION_PCI_IOSF_CONFIG] = {},
+	[IWL_FW_INI_REGION_PCI_IOSF_CONFIG] = {
+		.get_num_of_ranges = iwl_dump_ini_mem_ranges,
+		.get_size = iwl_dump_ini_mem_get_size,
+		.fill_mem_hdr = iwl_dump_ini_mem_fill_header,
+		.fill_range = iwl_dump_ini_config_iter,
+	},
 };
 
 static u32 iwl_dump_ini_trigger(struct iwl_fw_runtime *fwrt,

drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c

@@ -236,6 +236,12 @@ static int iwl_dbg_tlv_alloc_region(struct iwl_trans *trans,
 		return -EINVAL;
 	}
 
+	if (type == IWL_FW_INI_REGION_PCI_IOSF_CONFIG &&
+	    !trans->ops->read_config32) {
+		IWL_ERR(trans, "WRT: Unsupported region type %u\n", type);
+		return -EOPNOTSUPP;
+	}
+
 	active_reg = &trans->dbg.active_regions[id];
 	if (*active_reg) {
 		IWL_WARN(trans, "WRT: Overriding region id %u\n", id);

drivers/net/wireless/intel/iwlwifi/iwl-trans.h

@@ -544,6 +544,8 @@ struct iwl_trans_rxq_dma_data {
  * @read_mem: read device's SRAM in DWORD
  * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
  *	will be zeroed.
+ * @read_config32: read a u32 value from the device's config space at
+ *	the given offset.
  * @configure: configure parameters required by the transport layer from
  *	the op_mode. May be called several times before start_fw, can't be
  *	called after that.
@@ -614,6 +616,7 @@ struct iwl_trans_ops {
 			void *buf, int dwords);
 	int (*write_mem)(struct iwl_trans *trans, u32 addr,
 			 const void *buf, int dwords);
+	int (*read_config32)(struct iwl_trans *trans, u32 ofs, u32 *val);
 	void (*configure)(struct iwl_trans *trans,
 			  const struct iwl_trans_config *trans_cfg);
 	void (*set_pmi)(struct iwl_trans *trans, bool state);