Commit f6aaaac9 authored by Guennadi Liakhovetski's avatar Guennadi Liakhovetski Committed by Laurent Pinchart

sh-pfc: r8a7790: add pin definitions for the I2C3 interface

There are four I2C interfaces on r8a7790, each of them can be connected to
one of the two respective I2C controllers, e.g. interface #0 can be
configured to work with I2C0 or with IIC0. Additionally some of those
interfaces can also use one of several pin sets. Interface #3 is special,
because it can be used in automatic mode for DVFS. It only has one set
of pins available and those pins cannot be used for anything else, they
also lack the GPIO function.

This patch uses the sh-pfc ability to configure pins, not associated with
GPIOs and adds support for I2C3 to the r8a7790 PFC set up.
Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
parent 70702bfc
......@@ -781,6 +781,8 @@ enum {
ADICS_SAMP_MARK, DU2_CDE_MARK, QPOLB_MARK, SCIFA2_RXD_B_MARK,
USB1_PWEN_MARK, AUDIO_CLKOUT_D_MARK, USB1_OVC_MARK,
TCLK1_B_MARK,
I2C3_SCL_MARK, I2C3_SDA_MARK,
PINMUX_MARK_END,
};
......@@ -1719,10 +1721,22 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_DATA(IP16_6, AUDIO_CLKOUT_D),
PINMUX_IPSR_DATA(IP16_7, USB1_OVC),
PINMUX_IPSR_MODSEL_DATA(IP16_7, TCLK1_B, SEL_TMU1_1),
PINMUX_DATA(I2C3_SCL_MARK, FN_SEL_IICDVFS_1),
PINMUX_DATA(I2C3_SDA_MARK, FN_SEL_IICDVFS_1),
};
/* R8A7790 has 6 banks with 32 GPIOs in each = 192 GPIOs */
#define ROW_GROUP_A(r) ('Z' - 'A' + 1 + (r))
#define PIN_NUMBER(r, c) (((r) - 'A') * 31 + (c) + 200)
#define PIN_A_NUMBER(r, c) PIN_NUMBER(ROW_GROUP_A(r), c)
static struct sh_pfc_pin pinmux_pins[] = {
PINMUX_GPIO_GP_ALL(),
/* Pins not associated with a GPIO port */
SH_PFC_PIN_NAMED(ROW_GROUP_A('J'), 15, AJ15),
SH_PFC_PIN_NAMED(ROW_GROUP_A('H'), 15, AH15),
};
/* - DU RGB ----------------------------------------------------------------- */
......@@ -2048,6 +2062,14 @@ static const unsigned int i2c2_e_pins[] = {
static const unsigned int i2c2_e_mux[] = {
I2C2_SCL_E_MARK, I2C2_SDA_E_MARK,
};
/* - I2C3 ------------------------------------------------------------------- */
static const unsigned int i2c3_pins[] = {
/* SCL, SDA */
PIN_A_NUMBER('J', 15), PIN_A_NUMBER('H', 15),
};
static const unsigned int i2c3_mux[] = {
I2C3_SCL_MARK, I2C3_SDA_MARK,
};
/* - INTC ------------------------------------------------------------------- */
static const unsigned int intc_irq0_pins[] = {
/* IRQ */
......@@ -3113,6 +3135,7 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(i2c2_c),
SH_PFC_PIN_GROUP(i2c2_d),
SH_PFC_PIN_GROUP(i2c2_e),
SH_PFC_PIN_GROUP(i2c3),
SH_PFC_PIN_GROUP(intc_irq0),
SH_PFC_PIN_GROUP(intc_irq1),
SH_PFC_PIN_GROUP(intc_irq2),
......@@ -3323,6 +3346,10 @@ static const char * const i2c2_groups[] = {
"i2c2_e",
};
static const char * const i2c3_groups[] = {
"i2c3",
};
static const char * const intc_groups[] = {
"intc_irq0",
"intc_irq1",
......@@ -3551,6 +3578,7 @@ static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(hscif1),
SH_PFC_FUNCTION(i2c1),
SH_PFC_FUNCTION(i2c2),
SH_PFC_FUNCTION(i2c3),
SH_PFC_FUNCTION(intc),
SH_PFC_FUNCTION(mmc0),
SH_PFC_FUNCTION(mmc1),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment