Skip to content

L
linux
Commit f6e79a06 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files
Options

I2C: clean up the drivers/i2c/Kconfig file

parent 89a544fd
Hide whitespace changes
Inline Side-by-side
Showing with 38 additions and 64 deletions
drivers/i2c/Kconfig
View file @ f6e79a06
......@@ -22,10 +22,20 @@ config I2C
If you want I2C support, you should say Y here and also to the
specific driver for your bus adapter(s) below.
This I2C support is also available as a module. If you want to
compile it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called i2c-core.
This I2C support can also be built as a module. If so, the module
will be called i2c-core.
config I2C_CHARDEV
tristate "I2C device interface"
depends on I2C
help
Say Y here to use i2c-* device files, usually found in the /dev
directory on your system. They make it possible to have user-space
programs use the I2C bus. Information on how to do this is
contained in the file <file:Documentation/i2c/dev-interface>.
This support is also available as a module. If so, the module
will be called i2c-dev.
config I2C_ALGOBIT
tristate "I2C bit-banging interfaces"
......@@ -35,10 +45,8 @@ config I2C_ALGOBIT
adapters. Say Y if you own an I2C adapter belonging to this class
and then say Y to the specific driver for you adapter below.
This support is also available as a module. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called i2c-algo-bit.
This support is also available as a module. If so, the module
will be called i2c-algo-bit.
config I2C_PROSAVAGE
tristate "S3/VIA (Pro)Savage"
......@@ -51,14 +59,8 @@ config I2C_PROSAVAGE
S3/VIA KM266/VT8375 aka ProSavage8
S3/VIA KM133/VT8365 aka Savage4
This can also be built as a module which can be inserted and removed
while the kernel is running. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
The module will be called i2c-prosavage.
You will also need the latest user-space utilties: you can find them
in the lm_sensors package, which you can download at
http://www.lm-sensors.nu
This support is also available as a module. If so, the module
will be called i2c-prosavage.
config I2C_PHILIPSPAR
tristate "Philips style parallel port adapter"
......@@ -67,13 +69,8 @@ config I2C_PHILIPSPAR
This supports parallel-port I2C adapters made by Philips. Say Y if
you own such an adapter.
This driver is also available as a module. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called i2c-philips-par.
Note that if you want support for different parallel port devices,
life will be much easier if you compile them all as modules.
This support is also available as a module. If so, the module
will be called i2c-philips-par.
config I2C_ELV
tristate "ELV adapter"
......@@ -82,10 +79,8 @@ config I2C_ELV
This supports parallel-port I2C adapters called ELV. Say Y if you
own such an adapter.
This driver is also available as a module. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called i2c-elv.
This support is also available as a module. If so, the module
will be called i2c-elv.
config I2C_VELLEMAN
tristate "Velleman K9000 adapter"
......@@ -94,10 +89,8 @@ config I2C_VELLEMAN
This supports the Velleman K9000 parallel-port I2C adapter. Say Y
if you own such an adapter.
This driver is also available as a module. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called i2c-velleman.
This support is also available as a module. If so, the module
will be called i2c-velleman.
config SCx200_I2C
tristate "NatSemi SCx200 I2C using GPIO pins"
......@@ -107,7 +100,8 @@ config SCx200_I2C
If you don't know what to do here, say N.
If compiled as a module, it will be called scx200_i2c.
This support is also available as a module. If so, the module
will be called scx200_i2c.
config SCx200_I2C_SCL
int "GPIO pin used for SCL"
......@@ -133,7 +127,8 @@ config SCx200_ACB
If you don't know what to do here, say N.
If compiled as a module, it will be called scx200_acb.
This support is also available as a module. If so, the module
will be called scx200_acb.
config I2C_ALGOPCF
tristate "I2C PCF 8584 interfaces"
......@@ -143,10 +138,8 @@ config I2C_ALGOPCF
Say Y if you own an I2C adapter belonging to this class and then say
Y to the specific driver for you adapter below.
This support is also available as a module. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called i2c-algo-pcf.
This support is also available as a module. If so, the module
will be called i2c-algo-pcf.
config I2C_ELEKTOR
tristate "Elektor ISA card"
......@@ -155,10 +148,8 @@ config I2C_ELEKTOR
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
such an adapter.
This driver is also available as a module. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called i2c-elektor.
This support is also available as a module. If so, the module
will be called i2c-elektor.
config I2C_KEYWEST
tristate "Powermac Keywest I2C interface"
......@@ -167,9 +158,8 @@ config I2C_KEYWEST
This supports the use of the I2C interface in the combo-I/O
chip on recent Apple machines. Say Y if you have such a machine.
This driver is also available as a module. If you want to compile
it as a module, say M here and read Documentation/modules.txt.
The module will be called i2c-keywest.
This support is also available as a module. If so, the module
will be called i2c-keywest.
config ITE_I2C_ALGO
tristate "ITE I2C Algorithm"
......@@ -179,9 +169,8 @@ config ITE_I2C_ALGO
systems. Say Y if you have one of these. You should also say Y for
the ITE I2C peripheral driver support below.
This support is also available as a module. If you want to compile
it as a module, say M here and read Documentation/modules.txt.
The module will be called i2c-algo-ite.
This support is also available as a module. If so, the module
will be called i2c-algo-ite.
config ITE_I2C_ADAP
tristate "ITE I2C Adapter"
......@@ -191,9 +180,8 @@ config ITE_I2C_ADAP
systems. Say Y if you have one of these. You should also say Y for
the ITE I2C driver algorithm support above.
This support is also available as a module. If you want to compile
it as a module, say M here and read Documentation/modules.txt.
The module will be called i2c-adap-ite.
This support is also available as a module. If so, the module
will be called i2c-adap-ite.
config I2C_ALGO8XX
tristate "MPC8xx CPM I2C interface"
......@@ -211,20 +199,6 @@ config I2C_IOP3XX
tristate "Intel XScale IOP3xx on-chip I2C interface"
depends on ARCH_IOP3XX && I2C
config I2C_CHARDEV
tristate "I2C device interface"
depends on I2C
help
Say Y here to use i2c-* device files, usually found in the /dev
directory on your system. They make it possible to have user-space
programs use the I2C bus. Information on how to do this is
contained in the file <file:Documentation/i2c/dev-interface>.
This code is also available as a module. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called i2c-dev.
source drivers/i2c/busses/Kconfig
source drivers/i2c/chips/Kconfig
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7