Commit f70e9d88 authored by Zhangfei Gao's avatar Zhangfei Gao Committed by David S. Miller

Documentation: add Device tree bindings for Hisilicon hix5hd2 ethernet

Signed-off-by: default avatarZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 014b2013
Hisilicon hix5hd2 gmac controller
Required properties:
- compatible: should be "hisilicon,hix5hd2-gmac".
- reg: specifies base physical address(s) and size of the device registers.
The first region is the MAC register base and size.
The second region is external interface control register.
- interrupts: should contain the MAC interrupt.
- #address-cells: must be <1>.
- #size-cells: must be <0>.
- phy-mode: see ethernet.txt [1].
- phy-handle: see ethernet.txt [1].
- mac-address: see ethernet.txt [1].
- clocks: clock phandle and specifier pair.
- PHY subnode: inherits from phy binding [2]
[1] Documentation/devicetree/bindings/net/ethernet.txt
[2] Documentation/devicetree/bindings/net/phy.txt
Example:
gmac0: ethernet@f9840000 {
compatible = "hisilicon,hix5hd2-gmac";
reg = <0xf9840000 0x1000>,<0xf984300c 0x4>;
interrupts = <0 71 4>;
#address-cells = <1>;
#size-cells = <0>;
phy-mode = "mii";
phy-handle = <&phy2>;
mac-address = [00 00 00 00 00 00];
clocks = <&clock HIX5HD2_MAC0_CLK>;
phy2: ethernet-phy@2 {
reg = <2>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment