[PATCH] input / keyboard / Scancode Set 3 support broken

If somebody uses keyboard scancode set 3 it is necessary to explicitly
program the keyboard to send make/break codes for all keys and to set
autorepeat for all keys.

This is critical for some people.  One example is the LK461/46W series
of keyboards from Digital Equipment Corporations.  These are VMS
keyboards that are also usable on a normal PC.

These keyboards support Scancode Set 2, but for some keys this support
is screwed up -- some function keys (e.g.  F18/F20) report the same
scancode sequence combined with both alt and shift keys. 

Scancode Set 3 works perfectly if all keys are programmed to give
make/break codes. 

A lot of keyboards manufactured by Cherry only make/break for some (not all!)
modifyer keys in scancode set 3 without this fix.

drivers/input/keyboard/atkbd.c

@@ -111,6 +111,7 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_CMD_SETREP	0x10f3
 #define ATKBD_CMD_ENABLE	0x00f4
 #define ATKBD_CMD_RESET_DIS	0x00f5
+#define ATKBD_CMD_SETALL_MBR	0x00fa
 #define ATKBD_CMD_RESET_BAT	0x02ff
 #define ATKBD_CMD_RESEND	0x00fe
 #define ATKBD_CMD_EX_ENABLE	0x10ea
@@ -520,6 +521,8 @@ static int atkbd_set_3(struct atkbd *atkbd)
 		return 2;
 	}
 
+	atkbd_command(atkbd, param, ATKBD_CMD_SETALL_MBR);
+
 	return 3;
 }