omapfb: copy omapdss & displays for omapfb

This patch makes a copy of the omapdss driver and the omap panel &
encoder drivers for omapfb. The purpose is to separate omapdrm and
omapfb drivers from each other.

Note that this patch only does a direct copy of the files without any
other modifications. The files are not yet used.

The original files are in:

drivers/video/fbdev/omap2/dss/
drivers/video/fbdev/omap2/displays-new/

Here's a more detailed explanation about this and the following patches,
from the introduction mail of the patch series:

A short background on the current status. We have the following
entities:

* omapdss, located in drivers/video/fbdev/omap2/dss/. This is a driver for the
  display subsystem IPs used on OMAP (and related) SoCs. It offers only a
  kernel internal API, and does not implement anything for fbdev or drm.

* omapdss panels and encoders, located in
  drivers/video/fbdev/omap2/displays-new/. These are panel and external encoder
  drivers, which use APIs offered by omapdss driver. These also don't implement
  anything for fbdev or drm.

* omapdrm, located in drivers/gpu/drm/omapdrm/. This is a drm driver, which
  uses omapdss and the panel/encoder drivers to operate the hardware.

* omapfb, located in drivers/video/fbdev/omap2/omapfb/. This is an fbdev
  driver, which uses omapdss and the panel/encoder drivers to operate the
  hardware.

* omap_vout, located in drivers/media/platform/omap/. This is a v4l2 driver,
  which uses omapdss and omapfb to implement a v4l2 API for the video overlays.

So, on the top level, we have either omapdrm, or omapfb+omap_vout. Both of
those use the same low level drivers. Without going to the historical details
why the architecture is like that, I think it's finally time to change that.

The situation with omapfb+omap_vout is that it still works, but no new features
have been added for a long time, and I want to keep it working as it's still
being used.  At some point in the future I'd like to remove omapfb and
omap_vout altogether.

Omapdrm, on the other hand, is being actively developed. Sharing the low level
parts with omapfb makes that development more difficult than it should be. It
also "hides" half of the development, as everything happening in the low level
parts resides under fbdev directory, not in the drm directory.

I've been wanting to clean this up for a long time, but I haven't figured out a
very good way to do it. I still haven't, but here's the best way I have come up
with.

This series makes a full copy of the low level parts, omapdss and panel/encoder
drivers. Both omapfb+omap_vout and omapdrm will have their own versions. The
copy omapfb+omap_vout get is a new copy, and the copy that omapdrm gets is just
the current files moved. This way git will associate the omapdrm version with
the old files.

The omapfb+omap_vout versions won't be touched unless there are some big issues
there.

The omapdrm versions can be refactored and cleaned up, as the omapfb support
code is no longer needed. We can perhaps also merge omapdss and omapdrm into
the same kernel module.

This series only does the copy, and the absolutely necessary parts. No further
cleanups are done yet.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>

drivers/video/fbdev/omap2/omapfb/displays/Kconfig

+menu "OMAP Display Device Drivers (new device model)"
+        depends on OMAP2_DSS
+
+config DISPLAY_ENCODER_OPA362
+	tristate "OPA362 external analog amplifier"
+	help
+	  Driver for OPA362 external analog TV amplifier controlled
+	  through a GPIO.
+
+config DISPLAY_ENCODER_TFP410
+        tristate "TFP410 DPI to DVI Encoder"
+	help
+	  Driver for TFP410 DPI to DVI encoder.
+
+config DISPLAY_ENCODER_TPD12S015
+        tristate "TPD12S015 HDMI ESD protection and level shifter"
+	help
+	  Driver for TPD12S015, which offers HDMI ESD protection and level
+	  shifting.
+
+config DISPLAY_CONNECTOR_DVI
+        tristate "DVI Connector"
+	depends on I2C
+	help
+	  Driver for a generic DVI connector.
+
+config DISPLAY_CONNECTOR_HDMI
+        tristate "HDMI Connector"
+	help
+	  Driver for a generic HDMI connector.
+
+config DISPLAY_CONNECTOR_ANALOG_TV
+        tristate "Analog TV Connector"
+	help
+	  Driver for a generic analog TV connector.
+
+config DISPLAY_PANEL_DPI
+	tristate "Generic DPI panel"
+	help
+	  Driver for generic DPI panels.
+
+config DISPLAY_PANEL_DSI_CM
+	tristate "Generic DSI Command Mode Panel"
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Driver for generic DSI command mode panels.
+
+config DISPLAY_PANEL_SONY_ACX565AKM
+	tristate "ACX565AKM Panel"
+	depends on SPI && BACKLIGHT_CLASS_DEVICE
+	help
+	  This is the LCD panel used on Nokia N900
+
+config DISPLAY_PANEL_LGPHILIPS_LB035Q02
+	tristate "LG.Philips LB035Q02 LCD Panel"
+	depends on SPI
+	help
+	  LCD Panel used on the Gumstix Overo Palo35
+
+config DISPLAY_PANEL_SHARP_LS037V7DW01
+        tristate "Sharp LS037V7DW01 LCD Panel"
+        depends on BACKLIGHT_CLASS_DEVICE
+        help
+          LCD Panel used in TI's SDP3430 and EVM boards
+
+config DISPLAY_PANEL_TPO_TD028TTEC1
+        tristate "TPO TD028TTEC1 LCD Panel"
+        depends on SPI
+        help
+          LCD panel used in Openmoko.
+
+config DISPLAY_PANEL_TPO_TD043MTEA1
+        tristate "TPO TD043MTEA1 LCD Panel"
+        depends on SPI
+        help
+          LCD Panel used in OMAP3 Pandora
+
+config DISPLAY_PANEL_NEC_NL8048HL11
+	tristate "NEC NL8048HL11 Panel"
+	depends on SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+		This NEC NL8048HL11 panel is TFT LCD used in the
+		Zoom2/3/3630 sdp boards.
+
+endmenu

drivers/video/fbdev/omap2/omapfb/displays/Makefile

+obj-$(CONFIG_DISPLAY_ENCODER_OPA362) += encoder-opa362.o
+obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
+obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
+obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o
+obj-$(CONFIG_DISPLAY_CONNECTOR_HDMI) += connector-hdmi.o
+obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
+obj-$(CONFIG_DISPLAY_PANEL_DPI) += panel-dpi.o
+obj-$(CONFIG_DISPLAY_PANEL_DSI_CM) += panel-dsi-cm.o
+obj-$(CONFIG_DISPLAY_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
+obj-$(CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
+obj-$(CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+obj-$(CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
+obj-$(CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
+obj-$(CONFIG_DISPLAY_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o

drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c

+/*
+ * Analog TV Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct device *dev;
+
+	struct omap_video_timings timings;
+
+	enum omap_dss_venc_type connector_type;
+	bool invert_polarity;
+};
+
+static const struct omap_video_timings tvc_pal_timings = {
+	.x_res		= 720,
+	.y_res		= 574,
+	.pixelclock	= 13500000,
+	.hsw		= 64,
+	.hfp		= 12,
+	.hbp		= 68,
+	.vsw		= 5,
+	.vfp		= 5,
+	.vbp		= 41,
+
+	.interlace	= true,
+};
+
+static const struct of_device_id tvc_of_match[];
+
+struct tvc_of_data {
+	enum omap_dss_venc_type connector_type;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tvc_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.atv->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void tvc_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disconnect\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.atv->disconnect(in, dssdev);
+}
+
+static int tvc_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.atv->set_timings(in, &ddata->timings);
+
+	if (!ddata->dev->of_node) {
+		in->ops.atv->set_type(in, ddata->connector_type);
+
+		in->ops.atv->invert_vid_out_polarity(in,
+			ddata->invert_polarity);
+	}
+
+	r = in->ops.atv->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return r;
+}
+
+static void tvc_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.atv->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tvc_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.atv->set_timings(in, timings);
+}
+
+static void tvc_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int tvc_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.atv->check_timings(in, timings);
+}
+
+static u32 tvc_get_wss(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.atv->get_wss(in);
+}
+
+static int tvc_set_wss(struct omap_dss_device *dssdev, u32 wss)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.atv->set_wss(in, wss);
+}
+
+static struct omap_dss_driver tvc_driver = {
+	.connect		= tvc_connect,
+	.disconnect		= tvc_disconnect,
+
+	.enable			= tvc_enable,
+	.disable		= tvc_disable,
+
+	.set_timings		= tvc_set_timings,
+	.get_timings		= tvc_get_timings,
+	.check_timings		= tvc_check_timings,
+
+	.get_resolution		= omapdss_default_get_resolution,
+
+	.get_wss		= tvc_get_wss,
+	.set_wss		= tvc_set_wss,
+};
+
+static int tvc_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct connector_atv_platform_data *pdata;
+	struct omap_dss_device *in, *dssdev;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->connector_type = pdata->connector_type;
+	ddata->invert_polarity = pdata->invert_polarity;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int tvc_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int tvc_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+	ddata->dev = &pdev->dev;
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = tvc_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = tvc_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->timings = tvc_pal_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->driver = &tvc_driver;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = tvc_pal_timings;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit tvc_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(&ddata->dssdev);
+
+	tvc_disable(dssdev);
+	tvc_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id tvc_of_match[] = {
+	{ .compatible = "omapdss,svideo-connector", },
+	{ .compatible = "omapdss,composite-video-connector", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tvc_of_match);
+
+static struct platform_driver tvc_connector_driver = {
+	.probe	= tvc_probe,
+	.remove	= __exit_p(tvc_remove),
+	.driver	= {
+		.name	= "connector-analog-tv",
+		.of_match_table = tvc_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(tvc_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Analog TV Connector driver");
+MODULE_LICENSE("GPL");

drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c

+/*
+ * Generic DVI Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <drm/drm_edid.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static const struct omap_video_timings dvic_default_timings = {
+	.x_res		= 640,
+	.y_res		= 480,
+
+	.pixelclock	= 23500000,
+
+	.hfp		= 48,
+	.hsw		= 32,
+	.hbp		= 80,
+
+	.vfp		= 3,
+	.vsw		= 4,
+	.vbp		= 7,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings timings;
+
+	struct i2c_adapter *i2c_adapter;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int dvic_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dvi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void dvic_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dvi->disconnect(in, dssdev);
+}
+
+static int dvic_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dvi->set_timings(in, &ddata->timings);
+
+	r = in->ops.dvi->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void dvic_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.dvi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void dvic_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dvi->set_timings(in, timings);
+}
+
+static void dvic_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int dvic_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dvi->check_timings(in, timings);
+}
+
+static int dvic_ddc_read(struct i2c_adapter *adapter,
+		unsigned char *buf, u16 count, u8 offset)
+{
+	int r, retries;
+
+	for (retries = 3; retries > 0; retries--) {
+		struct i2c_msg msgs[] = {
+			{
+				.addr   = DDC_ADDR,
+				.flags  = 0,
+				.len    = 1,
+				.buf    = &offset,
+			}, {
+				.addr   = DDC_ADDR,
+				.flags  = I2C_M_RD,
+				.len    = count,
+				.buf    = buf,
+			}
+		};
+
+		r = i2c_transfer(adapter, msgs, 2);
+		if (r == 2)
+			return 0;
+
+		if (r != -EAGAIN)
+			break;
+	}
+
+	return r < 0 ? r : -EIO;
+}
+
+static int dvic_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	int r, l, bytes_read;
+
+	if (!ddata->i2c_adapter)
+		return -ENODEV;
+
+	l = min(EDID_LENGTH, len);
+	r = dvic_ddc_read(ddata->i2c_adapter, edid, l, 0);
+	if (r)
+		return r;
+
+	bytes_read = l;
+
+	/* if there are extensions, read second block */
+	if (len > EDID_LENGTH && edid[0x7e] > 0) {
+		l = min(EDID_LENGTH, len - EDID_LENGTH);
+
+		r = dvic_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
+				l, EDID_LENGTH);
+		if (r)
+			return r;
+
+		bytes_read += l;
+	}
+
+	return bytes_read;
+}
+
+static bool dvic_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	unsigned char out;
+	int r;
+
+	if (!ddata->i2c_adapter)
+		return true;
+
+	r = dvic_ddc_read(ddata->i2c_adapter, &out, 1, 0);
+
+	return r == 0;
+}
+
+static struct omap_dss_driver dvic_driver = {
+	.connect	= dvic_connect,
+	.disconnect	= dvic_disconnect,
+
+	.enable		= dvic_enable,
+	.disable	= dvic_disable,
+
+	.set_timings	= dvic_set_timings,
+	.get_timings	= dvic_get_timings,
+	.check_timings	= dvic_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+
+	.read_edid	= dvic_read_edid,
+	.detect		= dvic_detect,
+};
+
+static int dvic_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct connector_dvi_platform_data *pdata;
+	struct omap_dss_device *in, *dssdev;
+	int i2c_bus_num;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	i2c_bus_num = pdata->i2c_bus_num;
+
+	if (i2c_bus_num != -1) {
+		struct i2c_adapter *adapter;
+
+		adapter = i2c_get_adapter(i2c_bus_num);
+		if (!adapter) {
+			dev_err(&pdev->dev,
+					"Failed to get I2C adapter, bus %d\n",
+					i2c_bus_num);
+			return -EPROBE_DEFER;
+		}
+
+		ddata->i2c_adapter = adapter;
+	}
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		i2c_put_adapter(ddata->i2c_adapter);
+
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int dvic_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	struct device_node *adapter_node;
+	struct i2c_adapter *adapter;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
+	if (adapter_node) {
+		adapter = of_get_i2c_adapter_by_node(adapter_node);
+		if (adapter == NULL) {
+			dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n");
+			omap_dss_put_device(ddata->in);
+			return -EPROBE_DEFER;
+		}
+
+		ddata->i2c_adapter = adapter;
+	}
+
+	return 0;
+}
+
+static int dvic_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = dvic_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = dvic_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->timings = dvic_default_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->driver = &dvic_driver;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_DVI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = dvic_default_timings;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	omap_dss_put_device(ddata->in);
+
+	i2c_put_adapter(ddata->i2c_adapter);
+
+	return r;
+}
+
+static int __exit dvic_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(&ddata->dssdev);
+
+	dvic_disable(dssdev);
+	dvic_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	i2c_put_adapter(ddata->i2c_adapter);
+
+	return 0;
+}
+
+static const struct of_device_id dvic_of_match[] = {
+	{ .compatible = "omapdss,dvi-connector", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dvic_of_match);
+
+static struct platform_driver dvi_connector_driver = {
+	.probe	= dvic_probe,
+	.remove	= __exit_p(dvic_remove),
+	.driver	= {
+		.name	= "connector-dvi",
+		.of_match_table = dvic_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(dvi_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic DVI Connector driver");
+MODULE_LICENSE("GPL");

drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c

+/*
+ * HDMI Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+#include <drm/drm_edid.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static const struct omap_video_timings hdmic_default_timings = {
+	.x_res		= 640,
+	.y_res		= 480,
+	.pixelclock	= 25175000,
+	.hsw		= 96,
+	.hfp		= 16,
+	.hbp		= 48,
+	.vsw		= 2,
+	.vfp		= 11,
+	.vbp		= 31,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+
+	.interlace	= false,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct device *dev;
+
+	struct omap_video_timings timings;
+
+	int hpd_gpio;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int hdmic_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.hdmi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void hdmic_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disconnect\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.hdmi->disconnect(in, dssdev);
+}
+
+static int hdmic_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.hdmi->set_timings(in, &ddata->timings);
+
+	r = in->ops.hdmi->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return r;
+}
+
+static void hdmic_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.hdmi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void hdmic_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.hdmi->set_timings(in, timings);
+}
+
+static void hdmic_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int hdmic_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->check_timings(in, timings);
+}
+
+static int hdmic_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->read_edid(in, edid, len);
+}
+
+static bool hdmic_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (gpio_is_valid(ddata->hpd_gpio))
+		return gpio_get_value_cansleep(ddata->hpd_gpio);
+	else
+		return in->ops.hdmi->detect(in);
+}
+
+static int hdmic_set_hdmi_mode(struct omap_dss_device *dssdev, bool hdmi_mode)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->set_hdmi_mode(in, hdmi_mode);
+}
+
+static int hdmic_set_infoframe(struct omap_dss_device *dssdev,
+		const struct hdmi_avi_infoframe *avi)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->set_infoframe(in, avi);
+}
+
+static struct omap_dss_driver hdmic_driver = {
+	.connect		= hdmic_connect,
+	.disconnect		= hdmic_disconnect,
+
+	.enable			= hdmic_enable,
+	.disable		= hdmic_disable,
+
+	.set_timings		= hdmic_set_timings,
+	.get_timings		= hdmic_get_timings,
+	.check_timings		= hdmic_check_timings,
+
+	.get_resolution		= omapdss_default_get_resolution,
+
+	.read_edid		= hdmic_read_edid,
+	.detect			= hdmic_detect,
+	.set_hdmi_mode		= hdmic_set_hdmi_mode,
+	.set_hdmi_infoframe	= hdmic_set_infoframe,
+};
+
+static int hdmic_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct connector_hdmi_platform_data *pdata;
+	struct omap_dss_device *in, *dssdev;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	ddata->hpd_gpio = -ENODEV;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int hdmic_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int gpio;
+
+	/* HPD GPIO */
+	gpio = of_get_named_gpio(node, "hpd-gpios", 0);
+	if (gpio_is_valid(gpio))
+		ddata->hpd_gpio = gpio;
+	else
+		ddata->hpd_gpio = -ENODEV;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int hdmic_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+	ddata->dev = &pdev->dev;
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = hdmic_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = hdmic_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->hpd_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
+				GPIOF_DIR_IN, "hdmi_hpd");
+		if (r)
+			goto err_reg;
+	}
+
+	ddata->timings = hdmic_default_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->driver = &hdmic_driver;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = hdmic_default_timings;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit hdmic_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(&ddata->dssdev);
+
+	hdmic_disable(dssdev);
+	hdmic_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id hdmic_of_match[] = {
+	{ .compatible = "omapdss,hdmi-connector", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, hdmic_of_match);
+
+static struct platform_driver hdmi_connector_driver = {
+	.probe	= hdmic_probe,
+	.remove	= __exit_p(hdmic_remove),
+	.driver	= {
+		.name	= "connector-hdmi",
+		.of_match_table = hdmic_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(hdmi_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("HDMI Connector driver");
+MODULE_LICENSE("GPL");

drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c

+/*
+ * OPA362 analog video amplifier with output/power control
+ *
+ * Copyright (C) 2014 Golden Delicious Computers
+ * Author: H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * based on encoder-tfp410
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct gpio_desc *enable_gpio;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int opa362_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(dssdev->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return -EBUSY;
+
+	r = in->ops.atv->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->src = dssdev;
+	dssdev->dst = dst;
+
+	return 0;
+}
+
+static void opa362_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "disconnect\n");
+
+	WARN_ON(!omapdss_device_is_connected(dssdev));
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	WARN_ON(dst != dssdev->dst);
+	if (dst != dssdev->dst)
+		return;
+
+	dst->src = NULL;
+	dssdev->dst = NULL;
+
+	in->ops.atv->disconnect(in, &ddata->dssdev);
+}
+
+static int opa362_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(dssdev->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.atv->set_timings(in, &ddata->timings);
+
+	r = in->ops.atv->enable(in);
+	if (r)
+		return r;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void opa362_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+
+	in->ops.atv->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void opa362_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "set_timings\n");
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.atv->set_timings(in, timings);
+}
+
+static void opa362_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	dev_dbg(dssdev->dev, "get_timings\n");
+
+	*timings = ddata->timings;
+}
+
+static int opa362_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "check_timings\n");
+
+	return in->ops.atv->check_timings(in, timings);
+}
+
+static void opa362_set_type(struct omap_dss_device *dssdev,
+		enum omap_dss_venc_type type)
+{
+	/* we can only drive a COMPOSITE output */
+	WARN_ON(type != OMAP_DSS_VENC_TYPE_COMPOSITE);
+
+}
+
+static const struct omapdss_atv_ops opa362_atv_ops = {
+	.connect	= opa362_connect,
+	.disconnect	= opa362_disconnect,
+
+	.enable		= opa362_enable,
+	.disable	= opa362_disable,
+
+	.check_timings	= opa362_check_timings,
+	.set_timings	= opa362_set_timings,
+	.get_timings	= opa362_get_timings,
+
+	.set_type	= opa362_set_type,
+};
+
+static int opa362_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev, *in;
+	struct gpio_desc *gpio;
+	int r;
+
+	dev_dbg(&pdev->dev, "probe\n");
+
+	if (node == NULL) {
+		dev_err(&pdev->dev, "Unable to find device tree\n");
+		return -EINVAL;
+	}
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+
+	ddata->enable_gpio = gpio;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.atv = &opa362_atv_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->owner = THIS_MODULE;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit opa362_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		opa362_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		opa362_disconnect(dssdev, dssdev->dst);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id opa362_of_match[] = {
+	{ .compatible = "omapdss,ti,opa362", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, opa362_of_match);
+
+static struct platform_driver opa362_driver = {
+	.probe	= opa362_probe,
+	.remove	= __exit_p(opa362_remove),
+	.driver	= {
+		.name	= "amplifier-opa362",
+		.of_match_table = opa362_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(opa362_driver);
+
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_DESCRIPTION("OPA362 analog video amplifier with output/power control");
+MODULE_LICENSE("GPL v2");

drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c

+/*
+ * TFP410 DPI-to-DVI encoder driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	int pd_gpio;
+	int data_lines;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tfp410_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return -EBUSY;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->src = dssdev;
+	dssdev->dst = dst;
+
+	return 0;
+}
+
+static void tfp410_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	WARN_ON(!omapdss_device_is_connected(dssdev));
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	WARN_ON(dst != dssdev->dst);
+	if (dst != dssdev->dst)
+		return;
+
+	dst->src = NULL;
+	dssdev->dst = NULL;
+
+	in->ops.dpi->disconnect(in, &ddata->dssdev);
+}
+
+static int tfp410_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dpi->set_timings(in, &ddata->timings);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value_cansleep(ddata->pd_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void tfp410_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value_cansleep(ddata->pd_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tfp410_fix_timings(struct omap_video_timings *timings)
+{
+	timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+	timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+	timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+}
+
+static void tfp410_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	tfp410_fix_timings(timings);
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void tfp410_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int tfp410_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	tfp410_fix_timings(timings);
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static const struct omapdss_dvi_ops tfp410_dvi_ops = {
+	.connect	= tfp410_connect,
+	.disconnect	= tfp410_disconnect,
+
+	.enable		= tfp410_enable,
+	.disable	= tfp410_disable,
+
+	.check_timings	= tfp410_check_timings,
+	.set_timings	= tfp410_set_timings,
+	.get_timings	= tfp410_get_timings,
+};
+
+static int tfp410_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct encoder_tfp410_platform_data *pdata;
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	ddata->pd_gpio = pdata->power_down_gpio;
+
+	ddata->data_lines = pdata->data_lines;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -ENODEV;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int tfp410_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
+
+	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
+		ddata->pd_gpio = gpio;
+	} else {
+		dev_err(&pdev->dev, "failed to parse PD gpio\n");
+		return gpio;
+	}
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int tfp410_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = tfp410_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = tfp410_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->pd_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->pd_gpio,
+				GPIOF_OUT_INIT_LOW, "tfp410 PD");
+		if (r) {
+			dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
+					ddata->pd_gpio);
+			goto err_gpio;
+		}
+	}
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.dvi = &tfp410_dvi_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+	dssdev->port_num = 1;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit tfp410_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		tfp410_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		tfp410_disconnect(dssdev, dssdev->dst);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id tfp410_of_match[] = {
+	{ .compatible = "omapdss,ti,tfp410", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tfp410_of_match);
+
+static struct platform_driver tfp410_driver = {
+	.probe	= tfp410_probe,
+	.remove	= __exit_p(tfp410_remove),
+	.driver	= {
+		.name	= "tfp410",
+		.of_match_table = tfp410_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(tfp410_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("TFP410 DPI to DVI encoder driver");
+MODULE_LICENSE("GPL");

drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015.c

+/*
+ * TPD12S015 HDMI ESD protection & level shifter chip driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct gpio_desc *ct_cp_hpd_gpio;
+	struct gpio_desc *ls_oe_gpio;
+	struct gpio_desc *hpd_gpio;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tpd_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	r = in->ops.hdmi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->src = dssdev;
+	dssdev->dst = dst;
+
+	if (ddata->ct_cp_hpd_gpio) {
+		gpiod_set_value_cansleep(ddata->ct_cp_hpd_gpio, 1);
+		/* DC-DC converter needs at max 300us to get to 90% of 5V */
+		udelay(300);
+	}
+
+	return 0;
+}
+
+static void tpd_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	WARN_ON(dst != dssdev->dst);
+
+	if (dst != dssdev->dst)
+		return;
+
+	gpiod_set_value_cansleep(ddata->ct_cp_hpd_gpio, 0);
+
+	dst->src = NULL;
+	dssdev->dst = NULL;
+
+	in->ops.hdmi->disconnect(in, &ddata->dssdev);
+}
+
+static int tpd_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		return 0;
+
+	in->ops.hdmi->set_timings(in, &ddata->timings);
+
+	r = in->ops.hdmi->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return r;
+}
+
+static void tpd_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return;
+
+	in->ops.hdmi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tpd_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.hdmi->set_timings(in, timings);
+}
+
+static void tpd_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int tpd_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	r = in->ops.hdmi->check_timings(in, timings);
+
+	return r;
+}
+
+static int tpd_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!gpiod_get_value_cansleep(ddata->hpd_gpio))
+		return -ENODEV;
+
+	gpiod_set_value_cansleep(ddata->ls_oe_gpio, 1);
+
+	r = in->ops.hdmi->read_edid(in, edid, len);
+
+	gpiod_set_value_cansleep(ddata->ls_oe_gpio, 0);
+
+	return r;
+}
+
+static bool tpd_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	return gpiod_get_value_cansleep(ddata->hpd_gpio);
+}
+
+static int tpd_set_infoframe(struct omap_dss_device *dssdev,
+		const struct hdmi_avi_infoframe *avi)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->set_infoframe(in, avi);
+}
+
+static int tpd_set_hdmi_mode(struct omap_dss_device *dssdev,
+		bool hdmi_mode)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->set_hdmi_mode(in, hdmi_mode);
+}
+
+static const struct omapdss_hdmi_ops tpd_hdmi_ops = {
+	.connect		= tpd_connect,
+	.disconnect		= tpd_disconnect,
+
+	.enable			= tpd_enable,
+	.disable		= tpd_disable,
+
+	.check_timings		= tpd_check_timings,
+	.set_timings		= tpd_set_timings,
+	.get_timings		= tpd_get_timings,
+
+	.read_edid		= tpd_read_edid,
+	.detect			= tpd_detect,
+	.set_infoframe		= tpd_set_infoframe,
+	.set_hdmi_mode		= tpd_set_hdmi_mode,
+};
+
+static int tpd_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int tpd_probe(struct platform_device *pdev)
+{
+	struct omap_dss_device *in, *dssdev;
+	struct panel_drv_data *ddata;
+	int r;
+	struct gpio_desc *gpio;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (pdev->dev.of_node) {
+		r = tpd_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+
+	gpio = devm_gpiod_get_index_optional(&pdev->dev, NULL, 0,
+		GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		goto err_gpio;
+
+	ddata->ct_cp_hpd_gpio = gpio;
+
+	gpio = devm_gpiod_get_index_optional(&pdev->dev, NULL, 1,
+		GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		goto err_gpio;
+
+	ddata->ls_oe_gpio = gpio;
+
+	gpio = devm_gpiod_get_index(&pdev->dev, NULL, 2,
+		GPIOD_IN);
+	if (IS_ERR(gpio))
+		goto err_gpio;
+
+	ddata->hpd_gpio = gpio;
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.hdmi = &tpd_hdmi_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_HDMI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->port_num = 1;
+
+	in = ddata->in;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit tpd_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		tpd_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		tpd_disconnect(dssdev, dssdev->dst);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id tpd_of_match[] = {
+	{ .compatible = "omapdss,ti,tpd12s015", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tpd_of_match);
+
+static struct platform_driver tpd_driver = {
+	.probe	= tpd_probe,
+	.remove	= __exit_p(tpd_remove),
+	.driver	= {
+		.name	= "tpd12s015",
+		.of_match_table = tpd_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(tpd_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("TPD12S015 driver");
+MODULE_LICENSE("GPL");

drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c

+/*
+ * Generic MIPI DPI Panel Driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+#include <video/of_display_timing.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	/* used for non-DT boot, to be removed */
+	int backlight_gpio;
+
+	struct gpio_desc *enable_gpio;
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int panel_dpi_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void panel_dpi_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int panel_dpi_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	gpiod_set_value_cansleep(ddata->enable_gpio, 1);
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void panel_dpi_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
+
+	gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void panel_dpi_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int panel_dpi_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver panel_dpi_ops = {
+	.connect	= panel_dpi_connect,
+	.disconnect	= panel_dpi_disconnect,
+
+	.enable		= panel_dpi_enable,
+	.disable	= panel_dpi_disable,
+
+	.set_timings	= panel_dpi_set_timings,
+	.get_timings	= panel_dpi_get_timings,
+	.check_timings	= panel_dpi_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static int panel_dpi_probe_pdata(struct platform_device *pdev)
+{
+	const struct panel_dpi_platform_data *pdata;
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev, *in;
+	struct videomode vm;
+	int r;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	videomode_from_timing(pdata->display_timing, &vm);
+	videomode_to_omap_video_timings(&vm, &ddata->videomode);
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	r = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
+					GPIOF_OUT_INIT_LOW, "panel enable");
+	if (r)
+		goto err_gpio;
+
+	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
+	ddata->backlight_gpio = pdata->backlight_gpio;
+
+	return 0;
+
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int panel_dpi_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int r;
+	struct display_timing timing;
+	struct videomode vm;
+	struct gpio_desc *gpio;
+
+	gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+
+	ddata->enable_gpio = gpio;
+
+	ddata->backlight_gpio = -ENOENT;
+
+	r = of_get_display_timing(node, "panel-timing", &timing);
+	if (r) {
+		dev_err(&pdev->dev, "failed to get video timing\n");
+		return r;
+	}
+
+	videomode_from_timing(&timing, &vm);
+	videomode_to_omap_video_timings(&vm, &ddata->videomode);
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int panel_dpi_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = panel_dpi_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = panel_dpi_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->backlight_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
+				GPIOF_OUT_INIT_LOW, "panel backlight");
+		if (r)
+			goto err_gpio;
+	}
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &pdev->dev;
+	dssdev->driver = &panel_dpi_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit panel_dpi_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(dssdev);
+
+	panel_dpi_disable(dssdev);
+	panel_dpi_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id panel_dpi_of_match[] = {
+	{ .compatible = "omapdss,panel-dpi", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, panel_dpi_of_match);
+
+static struct platform_driver panel_dpi_driver = {
+	.probe = panel_dpi_probe,
+	.remove = __exit_p(panel_dpi_remove),
+	.driver = {
+		.name = "panel-dpi",
+		.of_match_table = panel_dpi_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(panel_dpi_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver");
+MODULE_LICENSE("GPL");

drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c

+/*
+ * LG.Philips LB035Q02 LCD Panel driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ * Based on a driver by: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static struct omap_video_timings lb035q02_timings = {
+	.x_res = 320,
+	.y_res = 240,
+
+	.pixelclock	= 6500000,
+
+	.hsw		= 2,
+	.hfp		= 20,
+	.hbp		= 68,
+
+	.vsw		= 2,
+	.vfp		= 4,
+	.vbp		= 18,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct spi_device *spi;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	/* used for non-DT boot, to be removed */
+	int backlight_gpio;
+
+	struct gpio_desc *enable_gpio;
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
+{
+	struct spi_message msg;
+	struct spi_transfer index_xfer = {
+		.len		= 3,
+		.cs_change	= 1,
+	};
+	struct spi_transfer value_xfer = {
+		.len		= 3,
+	};
+	u8	buffer[16];
+
+	spi_message_init(&msg);
+
+	/* register index */
+	buffer[0] = 0x70;
+	buffer[1] = 0x00;
+	buffer[2] = reg & 0x7f;
+	index_xfer.tx_buf = buffer;
+	spi_message_add_tail(&index_xfer, &msg);
+
+	/* register value */
+	buffer[4] = 0x72;
+	buffer[5] = val >> 8;
+	buffer[6] = val;
+	value_xfer.tx_buf = buffer + 4;
+	spi_message_add_tail(&value_xfer, &msg);
+
+	return spi_sync(spi, &msg);
+}
+
+static void init_lb035q02_panel(struct spi_device *spi)
+{
+	/* Init sequence from page 28 of the lb035q02 spec */
+	lb035q02_write_reg(spi, 0x01, 0x6300);
+	lb035q02_write_reg(spi, 0x02, 0x0200);
+	lb035q02_write_reg(spi, 0x03, 0x0177);
+	lb035q02_write_reg(spi, 0x04, 0x04c7);
+	lb035q02_write_reg(spi, 0x05, 0xffc0);
+	lb035q02_write_reg(spi, 0x06, 0xe806);
+	lb035q02_write_reg(spi, 0x0a, 0x4008);
+	lb035q02_write_reg(spi, 0x0b, 0x0000);
+	lb035q02_write_reg(spi, 0x0d, 0x0030);
+	lb035q02_write_reg(spi, 0x0e, 0x2800);
+	lb035q02_write_reg(spi, 0x0f, 0x0000);
+	lb035q02_write_reg(spi, 0x16, 0x9f80);
+	lb035q02_write_reg(spi, 0x17, 0x0a0f);
+	lb035q02_write_reg(spi, 0x1e, 0x00c1);
+	lb035q02_write_reg(spi, 0x30, 0x0300);
+	lb035q02_write_reg(spi, 0x31, 0x0007);
+	lb035q02_write_reg(spi, 0x32, 0x0000);
+	lb035q02_write_reg(spi, 0x33, 0x0000);
+	lb035q02_write_reg(spi, 0x34, 0x0707);
+	lb035q02_write_reg(spi, 0x35, 0x0004);
+	lb035q02_write_reg(spi, 0x36, 0x0302);
+	lb035q02_write_reg(spi, 0x37, 0x0202);
+	lb035q02_write_reg(spi, 0x3a, 0x0a0d);
+	lb035q02_write_reg(spi, 0x3b, 0x0806);
+}
+
+static int lb035q02_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	init_lb035q02_panel(ddata->spi);
+
+	return 0;
+}
+
+static void lb035q02_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int lb035q02_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void lb035q02_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void lb035q02_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void lb035q02_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int lb035q02_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver lb035q02_ops = {
+	.connect	= lb035q02_connect,
+	.disconnect	= lb035q02_disconnect,
+
+	.enable		= lb035q02_enable,
+	.disable	= lb035q02_disable,
+
+	.set_timings	= lb035q02_set_timings,
+	.get_timings	= lb035q02_get_timings,
+	.check_timings	= lb035q02_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static int lb035q02_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_lb035q02_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+	int r;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	r = devm_gpio_request_one(&spi->dev, pdata->enable_gpio,
+					GPIOF_OUT_INIT_LOW, "panel enable");
+	if (r)
+		goto err_gpio;
+
+	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
+	ddata->backlight_gpio = pdata->backlight_gpio;
+
+	return 0;
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int lb035q02_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+	struct gpio_desc *gpio;
+
+	gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio)) {
+		dev_err(&spi->dev, "failed to parse enable gpio\n");
+		return PTR_ERR(gpio);
+	}
+
+	ddata->enable_gpio = gpio;
+
+	ddata->backlight_gpio = -ENOENT;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int lb035q02_panel_spi_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi = spi;
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = lb035q02_probe_pdata(spi);
+		if (r)
+			return r;
+	} else if (spi->dev.of_node) {
+		r = lb035q02_probe_of(spi);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->backlight_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
+				GPIOF_OUT_INIT_LOW, "panel backlight");
+		if (r)
+			goto err_gpio;
+	}
+
+	ddata->videomode = lb035q02_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &lb035q02_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int lb035q02_panel_spi_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(dssdev);
+
+	lb035q02_disable(dssdev);
+	lb035q02_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id lb035q02_of_match[] = {
+	{ .compatible = "omapdss,lgphilips,lb035q02", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, lb035q02_of_match);
+
+static struct spi_driver lb035q02_spi_driver = {
+	.probe		= lb035q02_panel_spi_probe,
+	.remove		= lb035q02_panel_spi_remove,
+	.driver		= {
+		.name	= "panel_lgphilips_lb035q02",
+		.of_match_table = lb035q02_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_spi_driver(lb035q02_spi_driver);
+
+MODULE_ALIAS("spi:lgphilips,lb035q02");
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
+MODULE_LICENSE("GPL");

drivers/video/fbdev/omap2/omapfb/dss/Kconfig

+config OMAP2_DSS_INIT
+	bool
+
+menuconfig OMAP2_DSS
+        tristate "OMAP2+ Display Subsystem support"
+	select VIDEOMODE_HELPERS
+	select OMAP2_DSS_INIT
+	select HDMI
+        help
+	  OMAP2+ Display Subsystem support.
+
+if OMAP2_DSS
+
+config OMAP2_DSS_DEBUG
+	bool "Debug support"
+	default n
+	help
+	  This enables printing of debug messages. Alternatively, debug messages
+	  can also be enabled by setting CONFIG_DYNAMIC_DEBUG and then setting
+	  appropriate flags in <debugfs>/dynamic_debug/control.
+
+config OMAP2_DSS_DEBUGFS
+	bool "Debugfs filesystem support"
+	depends on DEBUG_FS
+	default n
+	help
+	  This enables debugfs for OMAPDSS at <debugfs>/omapdss. This enables
+	  querying about clock configuration and register configuration of dss,
+	  dispc, dsi, hdmi and rfbi.
+
+config OMAP2_DSS_COLLECT_IRQ_STATS
+	bool "Collect DSS IRQ statistics"
+	depends on OMAP2_DSS_DEBUGFS
+	default n
+	help
+	  Collect DSS IRQ statistics, printable via debugfs.
+
+	  The statistics can be found from
+	  <debugfs>/omapdss/dispc_irq for DISPC interrupts, and
+	  <debugfs>/omapdss/dsi_irq for DSI interrupts.
+
+config OMAP2_DSS_DPI
+	bool "DPI support"
+	default y
+	help
+	  DPI Interface. This is the Parallel Display Interface.
+
+config OMAP2_DSS_RFBI
+	bool "RFBI support"
+	depends on BROKEN
+        default n
+	help
+	  MIPI DBI support (RFBI, Remote Framebuffer Interface, in Texas
+	  Instrument's terminology).
+
+	  DBI is a bus between the host processor and a peripheral,
+	  such as a display or a framebuffer chip.
+
+	  See http://www.mipi.org/ for DBI specifications.
+
+config OMAP2_DSS_VENC
+	bool "VENC support"
+        default y
+	help
+	  OMAP Video Encoder support for S-Video and composite TV-out.
+
+config OMAP2_DSS_HDMI_COMMON
+	bool
+
+config OMAP4_DSS_HDMI
+	bool "HDMI support for OMAP4"
+        default y
+	select OMAP2_DSS_HDMI_COMMON
+	help
+	  HDMI support for OMAP4 based SoCs.
+
+config OMAP5_DSS_HDMI
+	bool "HDMI support for OMAP5"
+	default n
+	select OMAP2_DSS_HDMI_COMMON
+	help
+	  HDMI Interface for OMAP5 and similar cores. This adds the High
+	  Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI
+	  specification.
+
+config OMAP2_DSS_SDI
+	bool "SDI support"
+        default n
+	help
+	  SDI (Serial Display Interface) support.
+
+	  SDI is a high speed one-way display serial bus between the host
+	  processor and a display.
+
+config OMAP2_DSS_DSI
+	bool "DSI support"
+        default n
+	help
+	  MIPI DSI (Display Serial Interface) support.
+
+	  DSI is a high speed half-duplex serial interface between the host
+	  processor and a peripheral, such as a display or a framebuffer chip.
+
+	  See http://www.mipi.org/ for DSI specifications.
+
+config OMAP2_DSS_MIN_FCK_PER_PCK
+	int "Minimum FCK/PCK ratio (for scaling)"
+	range 0 32
+	default 0
+	help
+	  This can be used to adjust the minimum FCK/PCK ratio.
+
+	  With this you can make sure that DISPC FCK is at least
+	  n x PCK. Video plane scaling requires higher FCK than
+	  normally.
+
+	  If this is set to 0, there's no extra constraint on the
+	  DISPC FCK. However, the FCK will at minimum be
+	  2xPCK (if active matrix) or 3xPCK (if passive matrix).
+
+	  Max FCK is 173MHz, so this doesn't work if your PCK
+	  is very high.
+
+config OMAP2_DSS_SLEEP_AFTER_VENC_RESET
+	bool "Sleep 20ms after VENC reset"
+	default y
+	help
+	  There is a 20ms sleep after VENC reset which seemed to fix the
+	  reset. The reason for the bug is unclear, and it's also unclear
+	  on what platforms this happens.
+
+	  This option enables the sleep, and is enabled by default. You can
+	  disable the sleep if it doesn't cause problems on your platform.
+
+endif

drivers/video/fbdev/omap2/omapfb/dss/Makefile

+obj-$(CONFIG_OMAP2_DSS_INIT) += omapdss-boot-init.o
+obj-$(CONFIG_OMAP2_DSS) += omapdss.o
+# Core DSS files
+omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
+	output.o dss-of.o pll.o video-pll.o
+# DSS compat layer files
+omapdss-y += manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o \
+	dispc-compat.o display-sysfs.o
+omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
+omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
+omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
+omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
+omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
+omapdss-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += hdmi_common.o hdmi_wp.o hdmi_pll.o \
+	hdmi_phy.o
+omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi4.o hdmi4_core.o
+omapdss-$(CONFIG_OMAP5_DSS_HDMI) += hdmi5.o hdmi5_core.o
+ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG

drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.h

+/*
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP2_DSS_DISPC_COMPAT_H
+#define __OMAP2_DSS_DISPC_COMPAT_H
+
+void dispc_mgr_enable_sync(enum omap_channel channel);
+void dispc_mgr_disable_sync(enum omap_channel channel);
+
+int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
+		unsigned long timeout);
+
+int dss_dispc_initialize_irq(void);
+void dss_dispc_uninitialize_irq(void);
+
+#endif

drivers/video/fbdev/omap2/omapfb/dss/dss_features.h

+/*
+ * linux/drivers/video/omap2/dss/dss_features.h
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Archit Taneja <archit@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP2_DSS_FEATURES_H
+#define __OMAP2_DSS_FEATURES_H
+
+#define MAX_DSS_MANAGERS	4
+#define MAX_DSS_OVERLAYS	4
+#define MAX_DSS_LCD_MANAGERS	3
+#define MAX_NUM_DSI		2
+
+/* DSS has feature id */
+enum dss_feat_id {
+	FEAT_LCDENABLEPOL,
+	FEAT_LCDENABLESIGNAL,
+	FEAT_PCKFREEENABLE,
+	FEAT_FUNCGATED,
+	FEAT_MGR_LCD2,
+	FEAT_MGR_LCD3,
+	FEAT_LINEBUFFERSPLIT,
+	FEAT_ROWREPEATENABLE,
+	FEAT_RESIZECONF,
+	/* Independent core clk divider */
+	FEAT_CORE_CLK_DIV,
+	FEAT_LCD_CLK_SRC,
+	/* DSI-PLL power command 0x3 is not working */
+	FEAT_DSI_PLL_PWR_BUG,
+	FEAT_DSI_DCS_CMD_CONFIG_VC,
+	FEAT_DSI_VC_OCP_WIDTH,
+	FEAT_DSI_REVERSE_TXCLKESC,
+	FEAT_DSI_GNQ,
+	FEAT_DPI_USES_VDDS_DSI,
+	FEAT_HDMI_CTS_SWMODE,
+	FEAT_HDMI_AUDIO_USE_MCLK,
+	FEAT_HANDLE_UV_SEPARATE,
+	FEAT_ATTR2,
+	FEAT_VENC_REQUIRES_TV_DAC_CLK,
+	FEAT_CPR,
+	FEAT_PRELOAD,
+	FEAT_FIR_COEF_V,
+	FEAT_ALPHA_FIXED_ZORDER,
+	FEAT_ALPHA_FREE_ZORDER,
+	FEAT_FIFO_MERGE,
+	/* An unknown HW bug causing the normal FIFO thresholds not to work */
+	FEAT_OMAP3_DSI_FIFO_BUG,
+	FEAT_BURST_2D,
+	FEAT_DSI_PHY_DCC,
+	FEAT_MFLAG,
+};
+
+/* DSS register field id */
+enum dss_feat_reg_field {
+	FEAT_REG_FIRHINC,
+	FEAT_REG_FIRVINC,
+	FEAT_REG_FIFOHIGHTHRESHOLD,
+	FEAT_REG_FIFOLOWTHRESHOLD,
+	FEAT_REG_FIFOSIZE,
+	FEAT_REG_HORIZONTALACCU,
+	FEAT_REG_VERTICALACCU,
+	FEAT_REG_DISPC_CLK_SWITCH,
+};
+
+enum dss_range_param {
+	FEAT_PARAM_DSS_FCK,
+	FEAT_PARAM_DSS_PCD,
+	FEAT_PARAM_DSIPLL_LPDIV,
+	FEAT_PARAM_DSI_FCK,
+	FEAT_PARAM_DOWNSCALE,
+	FEAT_PARAM_LINEWIDTH,
+};
+
+/* DSS Feature Functions */
+unsigned long dss_feat_get_param_min(enum dss_range_param param);
+unsigned long dss_feat_get_param_max(enum dss_range_param param);
+enum omap_overlay_caps dss_feat_get_overlay_caps(enum omap_plane plane);
+bool dss_feat_color_mode_supported(enum omap_plane plane,
+		enum omap_color_mode color_mode);
+const char *dss_feat_get_clk_source_name(enum omap_dss_clk_source id);
+
+u32 dss_feat_get_buffer_size_unit(void);	/* in bytes */
+u32 dss_feat_get_burst_size_unit(void);		/* in bytes */
+
+bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type);
+
+bool dss_has_feature(enum dss_feat_id id);
+void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
+void dss_features_init(enum omapdss_version version);
+
+enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel);
+enum omap_dss_output_id dss_feat_get_supported_outputs(enum omap_channel channel);
+
+#endif