drm/i915/skl: Buffer translation improvements

This patch adds support for 0.85V VccIO on Skylake Y,
separate buffer translation tables for Skylake U,
and support for I_boost for the entries that needs this.

Changes in v2:
* Refactored the code a bit to move all DDI signal level setup to
  intel_ddi.c

Issue: VIZ-5677
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
[danvet: Apply style polish checkpatch suggested.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -2436,6 +2436,14 @@ struct drm_i915_cmd_table {
 /* ULX machines are also considered ULT. */
 #define IS_HSW_ULX(dev)		(INTEL_DEVID(dev) == 0x0A0E || \
 				 INTEL_DEVID(dev) == 0x0A1E)
+#define IS_SKL_ULT(dev)		(INTEL_DEVID(dev) == 0x1906 || \
+				 INTEL_DEVID(dev) == 0x1913 || \
+				 INTEL_DEVID(dev) == 0x1916 || \
+				 INTEL_DEVID(dev) == 0x1921 || \
+				 INTEL_DEVID(dev) == 0x1926)
+#define IS_SKL_ULX(dev)		(INTEL_DEVID(dev) == 0x190E || \
+				 INTEL_DEVID(dev) == 0x1915 || \
+				 INTEL_DEVID(dev) == 0x191E)
 #define IS_PRELIMINARY_HW(intel_info) ((intel_info)->is_preliminary)
 
 #define SKL_REVID_A0		(0x0)

drivers/gpu/drm/i915/i915_reg.h

@@ -1384,6 +1384,18 @@ enum skl_disp_power_wells {
 							_PORT_TX_DW14_LN0_C) + \
 					 _BXT_LANE_OFFSET(lane))
 
+/* UAIMI scratch pad register 1 */
+#define UAIMI_SPR1			0x4F074
+/* SKL VccIO mask */
+#define SKL_VCCIO_MASK			0x1
+/* SKL balance leg register */
+#define DISPIO_CR_TX_BMU_CR0		0x6C00C
+/* I_boost values */
+#define BALANCE_LEG_SHIFT(port)		(8+3*(port))
+#define BALANCE_LEG_MASK(port)		(7<<(8+3*(port)))
+/* Balance leg disable bits */
+#define BALANCE_LEG_DISABLE_SHIFT	23
+
 /*
  * Fence registers
  */

drivers/gpu/drm/i915/intel_dp.c

@@ -3424,92 +3424,6 @@ gen7_edp_signal_levels(uint8_t train_set)
 	}
 }
 
-/* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
-static uint32_t
-hsw_signal_levels(uint8_t train_set)
-{
-	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
-					 DP_TRAIN_PRE_EMPHASIS_MASK);
-	switch (signal_levels) {
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
-		return DDI_BUF_TRANS_SELECT(0);
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
-		return DDI_BUF_TRANS_SELECT(1);
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
-		return DDI_BUF_TRANS_SELECT(2);
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3:
-		return DDI_BUF_TRANS_SELECT(3);
-
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
-		return DDI_BUF_TRANS_SELECT(4);
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
-		return DDI_BUF_TRANS_SELECT(5);
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2:
-		return DDI_BUF_TRANS_SELECT(6);
-
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
-		return DDI_BUF_TRANS_SELECT(7);
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
-		return DDI_BUF_TRANS_SELECT(8);
-
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0:
-		return DDI_BUF_TRANS_SELECT(9);
-	default:
-		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
-			      "0x%x\n", signal_levels);
-		return DDI_BUF_TRANS_SELECT(0);
-	}
-}
-
-static void bxt_signal_levels(struct intel_dp *intel_dp)
-{
-	struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
-	enum port port = dport->port;
-	struct drm_device *dev = dport->base.base.dev;
-	struct intel_encoder *encoder = &dport->base;
-	uint8_t train_set = intel_dp->train_set[0];
-	uint32_t level = 0;
-
-	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
-					 DP_TRAIN_PRE_EMPHASIS_MASK);
-	switch (signal_levels) {
-	default:
-		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emph level\n");
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
-		level = 0;
-		break;
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
-		level = 1;
-		break;
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
-		level = 2;
-		break;
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3:
-		level = 3;
-		break;
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
-		level = 4;
-		break;
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
-		level = 5;
-		break;
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2:
-		level = 6;
-		break;
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
-		level = 7;
-		break;
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
-		level = 8;
-		break;
-	case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0:
-		level = 9;
-		break;
-	}
-
-	bxt_ddi_vswing_sequence(dev, level, port, encoder->type);
-}
-
 /* Properly updates "DP" with the correct signal levels. */
 static void
 intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
@@ -3517,22 +3431,20 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	enum port port = intel_dig_port->port;
 	struct drm_device *dev = intel_dig_port->base.base.dev;
-	uint32_t signal_levels, mask;
+	uint32_t signal_levels, mask = 0;
 	uint8_t train_set = intel_dp->train_set[0];
 
-	if (IS_BROXTON(dev)) {
-		signal_levels = 0;
-		bxt_signal_levels(intel_dp);
-		mask = 0;
-	} else if (HAS_DDI(dev)) {
-		signal_levels = hsw_signal_levels(train_set);
-		mask = DDI_BUF_EMP_MASK;
+	if (HAS_DDI(dev)) {
+		signal_levels = ddi_signal_levels(intel_dp);
+
+		if (IS_BROXTON(dev))
+			signal_levels = 0;
+		else
+			mask = DDI_BUF_EMP_MASK;
 	} else if (IS_CHERRYVIEW(dev)) {
 		signal_levels = chv_signal_levels(intel_dp);
-		mask = 0;
 	} else if (IS_VALLEYVIEW(dev)) {
 		signal_levels = vlv_signal_levels(intel_dp);
-		mask = 0;
 	} else if (IS_GEN7(dev) && port == PORT_A) {
 		signal_levels = gen7_edp_signal_levels(train_set);
 		mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;

drivers/gpu/drm/i915/intel_drv.h

@@ -968,8 +968,7 @@ void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder);
 void intel_ddi_clock_get(struct intel_encoder *encoder,
 			 struct intel_crtc_state *pipe_config);
 void intel_ddi_set_vc_payload_alloc(struct drm_crtc *crtc, bool state);
-void bxt_ddi_vswing_sequence(struct drm_device *dev, u32 level,
-				enum port port, int type);
+uint32_t ddi_signal_levels(struct intel_dp *intel_dp);
 
 /* intel_frontbuffer.c */
 void intel_fb_obj_invalidate(struct drm_i915_gem_object *obj,