Commit f89ab84a authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab

media: imx: imx7-mipi-csis: Don't use imx-media-utils helpers

The imx7-mipi-csis only uses the imx_media_init_mbus_fmt() function from
the imx-media-utils helpers. The helpers don't support all the media bus
formats used by this driver, and are thus a bad fit. As the MIPI CSIS is
a standalone IP core that could be integrated in other SoCs, let's not
use the helper.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: default avatarRui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
parent 9994e00d
......@@ -28,8 +28,6 @@
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>
#include "imx-media.h"
#define CSIS_DRIVER_NAME "imx7-mipi-csis"
#define CSIS_SUBDEV_NAME CSIS_DRIVER_NAME
......@@ -709,15 +707,21 @@ static int mipi_csis_init_cfg(struct v4l2_subdev *mipi_sd,
struct v4l2_mbus_framefmt *fmt_sink;
struct v4l2_mbus_framefmt *fmt_source;
enum v4l2_subdev_format_whence which;
int ret;
which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
fmt_sink = mipi_csis_get_format(state, cfg, which, CSIS_PAD_SINK);
ret = imx_media_init_mbus_fmt(fmt_sink, MIPI_CSIS_DEF_PIX_WIDTH,
MIPI_CSIS_DEF_PIX_HEIGHT, 0,
V4L2_FIELD_NONE, NULL);
if (ret < 0)
return ret;
fmt_sink->code = MEDIA_BUS_FMT_UYVY8_2X8;
fmt_sink->width = MIPI_CSIS_DEF_PIX_WIDTH;
fmt_sink->height = MIPI_CSIS_DEF_PIX_HEIGHT;
fmt_sink->field = V4L2_FIELD_NONE;
fmt_sink->colorspace = V4L2_COLORSPACE_SMPTE170M;
fmt_sink->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt_sink->colorspace);
fmt_sink->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt_sink->colorspace);
fmt_sink->quantization =
V4L2_MAP_QUANTIZATION_DEFAULT(false, fmt_sink->colorspace,
fmt_sink->ycbcr_enc);
/*
* When called from mipi_csis_subdev_init() to initialize the active
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment