Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Fix modular build of ide-pmac when mediabay is built in
  powerpc/pasemi: Fix build error on UP
  powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK
  maintainers: Fix PS3 patterns
  powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning
  powerpc/32: Don't clobber personality flags on exec
  powerpc: Fix crash on CPU hotplug
  powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover
  powerpc/85xx: Added SMP defconfig
  powerpc/85xx: Enabled a bunch of FSL specific drivers/options
  powerpc/85xx: Updated generic mpc85xx_defconfig
  powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD
  fsl_rio: Pass the proper device to dma mapping routines
  powerpc: Fix of_node_put() exit path in of_irq_map_one()
  powerpc/5200: defconfig updates
  powerpc/5200: Add FLASH nodes to lite5200 device tree
  powerpc/device-tree: Document MTD nodes with multiple "reg" tuples
  powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of
  powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back

Documentation/powerpc/booting-without-of.txt

@@ -43,12 +43,11 @@ Table of Contents
     2) Representing devices without a current OF specification
       a) PHY nodes
       b) Interrupt controllers
-      c) CFI or JEDEC memory-mapped NOR flash
-      d) 4xx/Axon EMAC ethernet nodes
-      e) Xilinx IP cores
-      f) USB EHCI controllers
-      g) MDIO on GPIOs
-      h) SPI busses
+      c) 4xx/Axon EMAC ethernet nodes
+      d) Xilinx IP cores
+      e) USB EHCI controllers
+      f) MDIO on GPIOs
+      g) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -1287,71 +1286,7 @@ platforms are moved over to use the flattened-device-tree model.
 		device_type = "open-pic";
 	};
 
-   c) CFI or JEDEC memory-mapped NOR flash
-
-    Flash chips (Memory Technology Devices) are often used for solid state
-    file systems on embedded devices.
-
-     - compatible : should contain the specific model of flash chip(s)
-       used, if known, followed by either "cfi-flash" or "jedec-flash"
-     - reg : Address range of the flash chip
-     - bank-width : Width (in bytes) of the flash bank.  Equal to the
-       device width times the number of interleaved chips.
-     - device-width : (optional) Width of a single flash chip.  If
-       omitted, assumed to be equal to 'bank-width'.
-     - #address-cells, #size-cells : Must be present if the flash has
-       sub-nodes representing partitions (see below).  In this case
-       both #address-cells and #size-cells must be equal to 1.
-
-    For JEDEC compatible devices, the following additional properties
-    are defined:
-
-     - vendor-id : Contains the flash chip's vendor id (1 byte).
-     - device-id : Contains the flash chip's device id (1 byte).
-
-    In addition to the information on the flash bank itself, the
-    device tree may optionally contain additional information
-    describing partitions of the flash address space.  This can be
-    used on platforms which have strong conventions about which
-    portions of the flash are used for what purposes, but which don't
-    use an on-flash partition table such as RedBoot.
-
-    Each partition is represented as a sub-node of the flash device.
-    Each node's name represents the name of the corresponding
-    partition of the flash device.
-
-    Flash partitions
-     - reg : The partition's offset and size within the flash bank.
-     - label : (optional) The label / name for this flash partition.
-       If omitted, the label is taken from the node name (excluding
-       the unit address).
-     - read-only : (optional) This parameter, if present, is a hint to
-       Linux that this flash partition should only be mounted
-       read-only.  This is usually used for flash partitions
-       containing early-boot firmware images or data which should not
-       be clobbered.
-
-    Example:
-
-	flash@ff000000 {
-		compatible = "amd,am29lv128ml", "cfi-flash";
-		reg = <ff000000 01000000>;
-		bank-width = <4>;
-		device-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		fs@0 {
-			label = "fs";
-			reg = <0 f80000>;
-		};
-		firmware@f80000 {
-			label ="firmware";
-			reg = <f80000 80000>;
-			read-only;
-		};
-	};
-
-    d) 4xx/Axon EMAC ethernet nodes
+    c) 4xx/Axon EMAC ethernet nodes
 
     The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
     the Axon bridge.  To operate this needs to interact with a ths
@@ -1499,7 +1434,7 @@ platforms are moved over to use the flattened-device-tree model.
 			   available.
 			   For Axon: 0x0000012a
 
-   e) Xilinx IP cores
+   d) Xilinx IP cores
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
@@ -1793,7 +1728,7 @@ platforms are moved over to use the flattened-device-tree model.
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
 
-    f) USB EHCI controllers
+    e) USB EHCI controllers
 
     Required properties:
       - compatible : should be "usb-ehci".
@@ -1819,7 +1754,7 @@ platforms are moved over to use the flattened-device-tree model.
 		   big-endian;
 	   };
 
-   g) MDIO on GPIOs
+   f) MDIO on GPIOs
 
    Currently defined compatibles:
    - virtual,gpio-mdio
@@ -1839,7 +1774,7 @@ platforms are moved over to use the flattened-device-tree model.
 			 &qe_pio_c 6>;
 	};
 
-    h) SPI (Serial Peripheral Interface) busses
+    g) SPI (Serial Peripheral Interface) busses
 
     SPI busses can be described with a node for the SPI master device
     and a set of child nodes for each SPI slave on the bus.  For this

Documentation/powerpc/dts-bindings/mtd-physmap.txt

+CFI or JEDEC memory-mapped NOR flash
+
+Flash chips (Memory Technology Devices) are often used for solid state
+file systems on embedded devices.
+
+ - compatible : should contain the specific model of flash chip(s)
+   used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range(s) of the flash chip(s)
+   It's possible to (optionally) define multiple "reg" tuples so that
+   non-identical NOR chips can be described in one flash node.
+ - bank-width : Width (in bytes) of the flash bank.  Equal to the
+   device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip.  If
+   omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+   sub-nodes representing partitions (see below).  In this case
+   both #address-cells and #size-cells must be equal to 1.
+
+For JEDEC compatible devices, the following additional properties
+are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+In addition to the information on the flash bank itself, the
+device tree may optionally contain additional information
+describing partitions of the flash address space.  This can be
+used on platforms which have strong conventions about which
+portions of the flash are used for what purposes, but which don't
+use an on-flash partition table such as RedBoot.
+
+Each partition is represented as a sub-node of the flash device.
+Each node's name represents the name of the corresponding
+partition of the flash device.
+
+Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+   If omitted, the label is taken from the node name (excluding
+   the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+   Linux that this flash partition should only be mounted
+   read-only.  This is usually used for flash partitions
+   containing early-boot firmware images or data which should not
+   be clobbered.
+
+Example:
+
+	flash@ff000000 {
+		compatible = "amd,am29lv128ml", "cfi-flash";
+		reg = <ff000000 01000000>;
+		bank-width = <4>;
+		device-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		fs@0 {
+			label = "fs";
+			reg = <0 f80000>;
+		};
+		firmware@f80000 {
+			label ="firmware";
+			reg = <f80000 80000>;
+			read-only;
+		};
+	};
+
+Here an example with multiple "reg" tuples:
+
+	flash@f0000000,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "intel,PC48F4400P0VB", "cfi-flash";
+		reg = <0 0x00000000 0x02000000
+		       0 0x02000000 0x02000000>;
+		bank-width = <2>;
+		partition@0 {
+			label = "test-part1";
+			reg = <0 0x04000000>;
+		};
+	};

MAINTAINERS

@@ -1337,12 +1337,9 @@ L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 F:	arch/powerpc/include/asm/cell*.h
-F:	arch/powerpc/include/asm/lv1call.h
-F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/include/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
-F:	arch/powerpc/platforms/ps3/
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 P:	David Vrabel
@@ -4507,7 +4504,9 @@ F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/platforms/ps3/
 F:	drivers/*/ps3*
 F:	drivers/ps3/
+F:	drivers/rtc/rtc-ps3.c
 F:	drivers/usb/host/*ps3.c
+F:	sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
 P:	Jim Paris

arch/powerpc/boot/dts/lite5200b.dts

@@ -293,4 +293,43 @@ pci@f0000d00 {
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xfe000000 0x02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <1>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "rootfs";
+				reg = <0x00200000 0x01d00000>;
+			};
+			partition@1f00000 {
+				label = "u-boot";
+				reg = <0x01f00000 0x00060000>;
+			};
+			partition@1f60000 {
+				label = "u-boot-env";
+				reg = <0x01f60000 0x00020000>;
+			};
+			partition@1f80000 {
+				label = "dtb";
+				reg = <0x01f80000 0x00080000>;
+			};
+		};
+	};
+
 };

arch/powerpc/configs/52xx/cm5200_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:47:44 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,10 +120,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 # CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -232,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,7 +286,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -440,7 +450,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -505,10 +514,12 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -537,6 +548,8 @@ CONFIG_LXT_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -555,7 +568,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -657,7 +669,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -786,11 +797,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -831,7 +842,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -846,6 +856,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -853,6 +864,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -863,6 +875,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -884,6 +897,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -941,6 +959,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -953,7 +972,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1024,6 +1042,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1039,11 +1058,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1061,6 +1081,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1089,9 +1112,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1099,17 +1125,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1140,10 +1168,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1211,6 +1241,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #

arch/powerpc/configs/52xx/pcm030_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:33 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:42 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,6 +71,7 @@ CONFIG_LOCALVERSION="trunk"
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -97,18 +100,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -117,10 +120,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,6 +134,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -141,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,8 +167,6 @@ CONFIG_DEFAULT_IOSCHED="noop"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -171,6 +174,7 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 # CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -181,6 +185,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -242,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -290,7 +300,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -340,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -352,7 +362,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -451,7 +460,6 @@ CONFIG_MTD_PHYSMAP=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -504,6 +512,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -580,6 +589,7 @@ CONFIG_PATA_MPC52xx=m
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -613,6 +623,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -636,7 +648,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -702,6 +713,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -767,7 +779,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -889,11 +900,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -934,7 +945,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -949,6 +959,7 @@ CONFIG_USB_STORAGE=m
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1007,8 +1018,9 @@ CONFIG_RTC_DRV_PCF8563=m
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1019,6 +1031,7 @@ CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1039,6 +1052,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1096,6 +1114,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1107,7 +1126,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1162,6 +1180,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1177,11 +1196,11 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1200,13 +1219,25 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64

arch/powerpc/include/asm/elf.h

@@ -258,7 +258,8 @@ do {								\
 # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
 		(exec_stk != EXSTACK_DISABLE_X) : 0)
 #else 
-# define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+# define SET_PERSONALITY(ex) \
+  set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 #endif /* __powerpc64__ */
 
 extern int dcache_bsize;

arch/powerpc/kernel/prom_parse.c

@@ -971,7 +971,7 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
 	struct device_node *p;
 	const u32 *intspec, *tmp, *addr;
 	u32 intsize, intlen;
-	int res;
+	int res = -EINVAL;
 
 	DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
 
@@ -995,21 +995,20 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
 
 	/* Get size of interrupt specifier */
 	tmp = of_get_property(p, "#interrupt-cells", NULL);
-	if (tmp == NULL) {
-		of_node_put(p);
-		return -EINVAL;
-	}
+	if (tmp == NULL)
+		goto out;
 	intsize = *tmp;
 
 	DBG(" intsize=%d intlen=%d\n", intsize, intlen);
 
 	/* Check index */
 	if ((index + 1) * intsize > intlen)
-		return -EINVAL;
+		goto out;
 
 	/* Get new specifier and map it */
 	res = of_irq_map_raw(p, intspec + index * intsize, intsize,
 			     addr, out_irq);
+out:
 	of_node_put(p);
 	return res;
 }

arch/powerpc/mm/hash_utils_64.c

@@ -753,7 +753,7 @@ void __init early_init_mmu(void)
 }
 
 #ifdef CONFIG_SMP
-void __init early_init_mmu_secondary(void)
+void __cpuinit early_init_mmu_secondary(void)
 {
 	/* Initialize hash table for that CPU */
 	if (!firmware_has_feature(FW_FEATURE_LPAR))

arch/powerpc/platforms/fsl_uli1575.c

@@ -275,11 +275,6 @@ static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
 	if (!machine_is(mpc86xx_hpcd))
 		return;
 
-	/* Interrupt Disable, Needed when SATA disabled */
-	pci_read_config_word(dev, PCI_COMMAND, &temp);
-	temp |= 1<<10;
-	pci_write_config_word(dev, PCI_COMMAND, temp);
-
 	pci_read_config_byte(dev, 0x83, &c);
 	c |= 0x80;
 	pci_write_config_byte(dev, 0x83, c);

arch/powerpc/platforms/pasemi/setup.c

@@ -44,10 +44,6 @@
 
 #include "pasemi.h"
 
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
 /* SDC reset register, must be pre-mapped at reset time */
 static void __iomem *reset_reg;
 

arch/powerpc/platforms/ps3/os-area.c

@@ -578,7 +578,7 @@ static void os_area_db_init(struct os_area_db *db)
  *
  */
 
-static void update_flash_db(void)
+static void __maybe_unused update_flash_db(void)
 {
 	int result;
 	int file;

arch/powerpc/sysdev/fsl_rio.c

@@ -18,6 +18,7 @@
 #include <linux/types.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include <linux/rio.h>
 #include <linux/rio_drv.h>
 #include <linux/of_platform.h>
@@ -159,6 +160,7 @@ struct rio_msg_rx_ring {
 };
 
 struct rio_priv {
+	struct device *dev;
 	void __iomem *regs_win;
 	struct rio_atmu_regs __iomem *atmu_regs;
 	struct rio_atmu_regs __iomem *maint_atmu_regs;
@@ -484,13 +486,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
 
 	for (i = 0; i < priv->msg_tx_ring.size; i++) {
 		priv->msg_tx_ring.virt_buffer[i] =
-			dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+			dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
 				&priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
 		if (!priv->msg_tx_ring.virt_buffer[i]) {
 			rc = -ENOMEM;
 			for (j = 0; j < priv->msg_tx_ring.size; j++)
 				if (priv->msg_tx_ring.virt_buffer[j])
-					dma_free_coherent(NULL,
+					dma_free_coherent(priv->dev,
 							RIO_MSG_BUFFER_SIZE,
 							priv->msg_tx_ring.
 							virt_buffer[j],
@@ -501,7 +503,7 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
 	}
 
 	/* Initialize outbound message descriptor ring */
-	priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+	priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
 				priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
 				&priv->msg_tx_ring.phys, GFP_KERNEL);
 	if (!priv->msg_tx_ring.virt) {
@@ -549,12 +551,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
 	return rc;
 
       out_irq:
-	dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+	dma_free_coherent(priv->dev,
+			  priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
 			  priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
 
       out_dma:
 	for (i = 0; i < priv->msg_tx_ring.size; i++)
-		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
 				  priv->msg_tx_ring.virt_buffer[i],
 				  priv->msg_tx_ring.phys_buffer[i]);
 
@@ -576,7 +579,8 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
 	out_be32(&priv->msg_regs->omr, 0);
 
 	/* Free ring */
-	dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+	dma_free_coherent(priv->dev,
+			  priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
 			  priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
 
 	/* Free interrupt */
@@ -654,7 +658,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
 		priv->msg_rx_ring.virt_buffer[i] = NULL;
 
 	/* Initialize inbound message ring */
-	priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+	priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
 				priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
 				&priv->msg_rx_ring.phys, GFP_KERNEL);
 	if (!priv->msg_rx_ring.virt) {
@@ -673,7 +677,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
 	rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
 			 "msg_rx", (void *)mport);
 	if (rc < 0) {
-		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
 				  priv->msg_tx_ring.virt_buffer[i],
 				  priv->msg_tx_ring.phys_buffer[i]);
 		goto out;
@@ -713,7 +717,7 @@ void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
 	out_be32(&priv->msg_regs->imr, 0);
 
 	/* Free ring */
-	dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+	dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
 			  priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
 
 	/* Free interrupt */
@@ -890,7 +894,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport)
 	}
 
 	/* Initialize inbound doorbells */
-	priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 *
+	priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
 		    DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
 	if (!priv->dbell_ring.virt) {
 		printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
@@ -911,7 +915,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport)
 			 "dbell_rx", (void *)mport);
 	if (rc < 0) {
 		iounmap(priv->dbell_win);
-		dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+		dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
 				  priv->dbell_ring.virt, priv->dbell_ring.phys);
 		printk(KERN_ERR
 		       "MPC85xx RIO: unable to request inbound doorbell irq");
@@ -1087,6 +1091,8 @@ int fsl_rio_setup(struct of_device *dev)
 	rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
 	strcpy(port->name, "RIO0 mport");
 
+	priv->dev = &dev->dev;
+
 	port->ops = ops;
 	port->host_deviceid = fsl_rio_get_hdid(port->id);
 

drivers/macintosh/Kconfig

@@ -123,7 +123,7 @@ config PMAC_APM_EMU
 
 config PMAC_MEDIABAY
 	bool "Support PowerBook hotswap media bay"
-	depends on PPC_PMAC && PPC32
+	depends on PPC_PMAC && PPC32 && BLOCK
 	help
 	  This option adds support for older PowerBook's hotswap media bay
 	  that can contains batteries, floppy drives, or IDE devices. PCI

drivers/macintosh/mediabay.c

@@ -447,6 +447,7 @@ int check_media_bay_by_base(unsigned long base, int what)
 
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(check_media_bay_by_base);
 
 int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
 			    int irq, ide_hwif_t *hwif)
@@ -486,6 +487,7 @@ int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
 
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
 #endif /* CONFIG_BLK_DEV_IDE_PMAC */
 
 static void media_bay_step(int i)

include/linux/fsl_devices.h

@@ -79,6 +79,10 @@ struct fsl_spi_platform_data {
 	u16	max_chipselect;
 	void	(*cs_control)(struct spi_device *spi, bool on);
 	u32	sysclk;
+
+	/* Legacy hooks, used by mpc52xx_psc_spi driver. */
+	void	(*activate_cs)(u8 cs, u8 polarity);
+	void	(*deactivate_cs)(u8 cs, u8 polarity);
 };
 
 struct mpc8xx_pcmcia_ops {