kbuild: Introduced extra-y, as replacement for EXTRA_TARGETS

EXTRA_TARGETS has been overloaded with functionality.
This is now split in two:
targets := list targets kbuild did not know of otherwise
extra-y := list targets to be build when not building modules only.
extra-y is mainly used to list .o files that is not to be included
in the fnal built-in.o file for a directory.

arch/alpha/kernel/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_TARGETS	:= head.o
+extra-y		:= head.o
 EXTRA_AFLAGS	:= $(CFLAGS)
 EXTRA_CFLAGS	:= -Werror -Wno-sign-compare
 

arch/arm/boot/bootp/Makefile

@@ -7,7 +7,7 @@ ZLDFLAGS	=-p -X -T $(obj)/bootp.lds \
 		 --defsym initrd_addr=$(INITRD_PHYS) \
 		 --defsym params=$(PARAMS_PHYS)
 
-EXTRA_TARGETS := bootp
+extra-y := bootp
 
 # Note that bootp.lds picks up kernel.o and initrd.o
 $(obj)/bootp:	$(addprefix $(obj)/,init.o kernel.o initrd.o bootp.lds)

arch/arm/kernel/Makefile

@@ -11,9 +11,6 @@ AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR)
 obj-y		:= arch.o compat.o dma.o $(ENTRY_OBJ) entry-common.o irq.o   \
 		   process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \
 		   time.o traps.o
-obj-m		:=
-obj-n		:=
-obj-		:=
 
 obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_PM)		+= pm.o
@@ -35,7 +32,7 @@ head-y			:= head.o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 endif
 
-EXTRA_TARGETS := $(head-y) init_task.o
+extra-y := $(head-y) init_task.o
 
 # Spell out some dependencies that `make dep' doesn't spot
 $(obj)/entry-armv.o: 	$(obj)/entry-header.S include/asm-arm/constants.h

arch/arm/mach-arc/Makefile

@@ -6,12 +6,9 @@
 
 obj-y			:= arch.o dma.o fault.o irq.o mm.o oldlatches.o \
 			   small_page.o
-obj-m			:=
-obj-n			:=
-obj-			:=
 
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 
-EXTRA_TARGETS 		:= head.o
+extra-y 		:= head.o
 
 AFLAGS_head.o		:= -DTEXTADDR=$(TEXTADDR)

arch/cris/kernel/Makefile

@@ -3,7 +3,7 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_TARGETS	:= head.o
+extra-y	:= head.o
 
 obj-y   := process.o signal.o entry.o traps.o irq.o \
            ptrace.o setup.o time.o sys_cris.o shadows.o \

arch/i386/kernel/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_TARGETS := head.o init_task.o
+extra-y := head.o init_task.o
 
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_i386.o \

arch/ia64/kernel/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_TARGETS	:= head.o init_task.o
+extra-y	:= head.o init_task.o
 
 obj-y := acpi.o entry.o gate.o efi.o efi_stub.o ia64_ksyms.o \
 	 irq.o irq_ia64.o irq_lsapic.o ivt.o \

arch/m68k/kernel/Makefile

@@ -3,9 +3,9 @@
 #
 
 ifndef CONFIG_SUN3
-  EXTRA_TARGETS := head.o
+  extra-y := head.o
 else
-  EXTRA_TARGETS := sun3-head.o
+  extra-y := sun3-head.o
 endif 
 
 obj-y		:= entry.o process.o traps.o ints.o signal.o ptrace.o \

arch/m68knommu/platform/5206/Makefile

@@ -18,4 +18,4 @@ endif
 
 obj-y := config.o
 
-EXTRA_TARGETS := $(BOARD)/crt0_$(MODEL).o
+extra-y := $(BOARD)/crt0_$(MODEL).o

arch/m68knommu/platform/5206e/Makefile

@@ -18,4 +18,4 @@ endif
 
 obj-y := config.o
 
-EXTRA_TARGETS := $(BOARD)/crt0_$(MODEL).o
+extra-y := $(BOARD)/crt0_$(MODEL).o

arch/m68knommu/platform/5249/Makefile

@@ -18,4 +18,4 @@ endif
 
 obj-y := config.o
 
-EXTRA_TARGETS := $(BOARD)/crt0_$(MODEL).o
+extra-y := $(BOARD)/crt0_$(MODEL).o

arch/m68knommu/platform/5272/Makefile

@@ -18,4 +18,4 @@ endif
 
 obj-y := config.o
 
-EXTRA_TARGETS := $(BOARD)/crt0_$(MODEL).o
+extra-y := $(BOARD)/crt0_$(MODEL).o

arch/m68knommu/platform/5307/Makefile

@@ -20,5 +20,5 @@ obj-$(CONFIG_COLDFIRE)	+= entry.o
 obj-$(CONFIG_M5307)	+= config.o
 
 ifeq ($(CONFIG_M5307),y)
-EXTRA_TARGETS := $(BOARD)/crt0_$(MODEL).o
+extra-y := $(BOARD)/crt0_$(MODEL).o
 endif

arch/m68knommu/platform/5407/Makefile

@@ -18,4 +18,4 @@ endif
 
 obj-y := config.o
 
-EXTRA_TARGETS := $(BOARD)/crt0_$(MODEL).o
+extra-y := $(BOARD)/crt0_$(MODEL).o

arch/m68knommu/platform/68328/Makefile

@@ -7,7 +7,7 @@ obj-$(CONFIG_M68EZ328)	+= entry.o ints.o
 obj-$(CONFIG_M68VZ328)	+= entry.o ints.o
 
 ifeq ($(CONFIG_M68328),y)
-EXTRA_TARGETS := $(BOARD)/bootlogo.rh $(BOARD)/crt0_$(MODEL).o
+extra-y := $(BOARD)/bootlogo.rh $(BOARD)/crt0_$(MODEL).o
 endif
 
 $(obj)/$(BOARD)/bootlogo.rh: $(src)/bootlogo.h

arch/m68knommu/platform/68360/Makefile

@@ -4,4 +4,4 @@
 
 obj-y := config.o commproc.o entry.o ints.o
 
-EXTRA_TARGETS := $(BOARD)/crt0_$(MODEL).o
+extra-y := $(BOARD)/crt0_$(MODEL).o

arch/m68knommu/platform/68EZ328/Makefile

@@ -4,7 +4,7 @@
 
 obj-y := config.o
 
-EXTRA_TARGETS := $(BOARD)/bootlogo.rh $(BOARD)/crt0_$(MODEL).o
+extra-y := $(BOARD)/bootlogo.rh $(BOARD)/crt0_$(MODEL).o
 
 $(obj)/$(BOARD)/bootlogo.rh: $(src)/bootlogo.h
 	perl $(src)/../68328/bootlogo.pl < $(src)/bootlogo.h \

arch/m68knommu/platform/68VZ328/Makefile

@@ -4,7 +4,7 @@
 
 obj-y := $(BOARD)/config.o
 
-EXTRA_TARGETS := $(BOARD)/bootlogo.rh $(BOARD)/crt0_$(MODEL).o
+extra-y := $(BOARD)/bootlogo.rh $(BOARD)/crt0_$(MODEL).o
 
 $(obj)/$(BOARD)/bootlogo.rh: $(src)/../68EZ328/bootlogo.h
 	perl $(src)/../68328/bootlogo.pl < $(src)/../68EZ328/bootlogo.h \

arch/mips/kernel/Makefile

@@ -4,7 +4,7 @@
 
 # EXTRA_AFLAGS = -mips3 -mcpu=r4000 # not used?
 
-EXTRA_TARGETS	:= head.o init_task.o
+extra-y				:= head.o init_task.o
 obj-y				+= branch.o process.o signal.o entry.o \
 				   traps.o ptrace.o vm86.o ioport.o reset.o \
 				   semaphore.o setup.o syscall.o sysmips.o \

arch/mips64/kernel/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the Linux/MIPS kernel.
 #
 
-EXTRA_TARGETS	:= head.o init_task.o
+extra-y	:= head.o init_task.o
 
 obj-y	:= branch.o entry.o proc.o process.o ptrace.o r4k_cache.o r4k_fpu.o \
 	   r4k_genex.o r4k_switch.o r4k_tlb.o r4k_tlb_debug.o r4k_tlb_glue.o \

arch/mips64/sgi-ip32/Makefile

@@ -3,7 +3,7 @@
 # under Linux.
 #
 
-EXTRA_TARGETS	:= ip32-irq-glue.o
+extra-y		:= ip32-irq-glue.o
 
 obj-y		+= ip32-irq.o ip32-rtc.o ip32-setup.o ip32-irq-glue.o \
 	 	   ip32-berr.o ip32-timer.o crime.o

arch/parisc/kernel/Makefile

@@ -4,7 +4,8 @@
 
 head-y			:= head.o
 head-$(CONFIG_PARISC64)	:= head64.o
-EXTRA_TARGETS	:= init_task.o pdc_cons.o process.o unaligned.o $(head-y)
+extra-y			:= init_task.o pdc_cons.o process.o
+			   unaligned.o $(head-y)
 
 AFLAGS_entry.o	:= -traditional
 AFLAGS_pacache.o := -traditional

arch/ppc/kernel/Makefile

@@ -15,7 +15,7 @@ HEAD-$(CONFIG_40x)		:= head_4xx.o
 HEAD-$(CONFIG_8xx)		:= head_8xx.o
 HEAD-$(CONFIG_6xx)		+= idle_6xx.o
 
-EXTRA_TARGETS	:= $(HEAD-y)
+extra-y	:= $(HEAD-y)
 
 obj-y				:= entry.o traps.o irq.o idle.o time.o misc.o \
 					process.o signal.o ptrace.o align.o \

arch/ppc64/boot/Makefile

@@ -64,7 +64,7 @@ targets 		+= zImage zImage.initrd imagesize.c \
 			   $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \
 			   $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \
 			   vmlinux.sm vmlinux.initrd vmlinux.sminitrd
-EXTRA_TARGETS		:= sysmap.o initrd.o
+extra-y			:= sysmap.o initrd.o
 
 quiet_cmd_sysmap = SYSMAP   $@
       cmd_sysmap = $(obj)/addSystemMap System.map $< $@

arch/ppc64/kernel/Makefile

@@ -3,7 +3,7 @@
 #
 
 EXTRA_CFLAGS	+= -mno-minimal-toc
-EXTRA_TARGETS	:= head.o
+extra-y		:= head.o
 obj-y               :=	setup.o entry.o traps.o irq.o idle.o \
 			time.o process.o signal.o syscalls.o misc.o ptrace.o \
 			align.o semaphore.o bitops.o stab.o htab.o pacaData.o \

arch/s390/kernel/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_TARGETS	:= head.o init_task.o
+extra-y		:= head.o init_task.o
 EXTRA_AFLAGS	:= -traditional
 
 obj-y	:= entry.o bitmap.o traps.o time.o process.o \

arch/s390x/kernel/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_TARGETS	:= head.o init_task.o
+extra-y		:= head.o init_task.o
 EXTRA_AFLAGS	:= -traditional
 
 obj-y		:= entry.o bitmap.o traps.o time.o process.o \

arch/sh/kernel/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the Linux/SuperH kernel.
 #
 
-EXTRA_TARGETS	:= head.o init_task.o
+extra-y	:= head.o init_task.o
 
 obj-y	:= process.o signal.o entry.o traps.o irq.o irq_ipr.o \
 	ptrace.o setup.o time.o sys_sh.o semaphore.o \

arch/sparc/kernel/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_TARGETS	:= head.o init_task.o
+extra-y		:= head.o init_task.o
 
 EXTRA_AFLAGS	:= -ansi
 

arch/sparc64/kernel/Makefile

@@ -5,7 +5,7 @@
 EXTRA_AFLAGS := -ansi
 EXTRA_CFLAGS := -Werror
 
-EXTRA_TARGETS	:= head.o init_task.o
+extra-y		:= head.o init_task.o
 
 obj-y		:= process.o setup.o cpu.o idprom.o \
 		   traps.o devices.o auxio.o \

arch/um/kernel/tt/Makefile

@@ -3,7 +3,7 @@
 # Licensed under the GPL
 #
 
-EXTRA_TARGETS := unmap_fin.o
+extra-y := unmap_fin.o
 
 obj-y = exec_kern.o exec_user.o gdb.o ksyms.o mem.o mem_user.o process_kern.o \
 	syscall_kern.o syscall_user.o time.o tlb.o tracer.o trap_user.o \

arch/v850/kernel/Makefile

@@ -9,7 +9,7 @@
 # for more details.
 #
 
-EXTRA_TARGETS := head.o init_task.o
+extra-y := head.o init_task.o
 
 obj-y += intv.o entry.o process.o syscalls.o time.o semaphore.o setup.o \
 	 signal.o irq.o mach.o ptrace.o bug.o

arch/x86_64/kernel/Makefile

@@ -2,8 +2,8 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_TARGETS 	:= head.o head64.o init_task.o
-EXTRA_AFLAGS  := -traditional
+extra-y 	:= head.o head64.o init_task.o
+EXTRA_AFLAGS	:= -traditional
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_x86_64.o \
 		pci-dma.o x8664_ksyms.o i387.o syscall.o vsyscall.o \

scripts/Makefile.build

@@ -15,6 +15,10 @@ include $(obj)/Makefile
 
 include scripts/Makefile.lib
 
+ifdef EXTRA_TARGETS
+$(warning kbuild: $(obj)/Makefile - Usage of EXTRA_TARGETS is obsolete in 2.5. Please fix!)
+endif
+
 ifdef export-objs
 $(warning kbuild: $(obj)/Makefile - Usage of export-objs is obsolete in 2.5. Please fix!)
 endif
@@ -53,7 +57,7 @@ endif
 
 touch-module = @echo $(@:.o=.ko) > $(MODVERDIR)/$(@F:.o=.mod)
 
-__build: $(if $(KBUILD_BUILTIN),$(O_TARGET) $(L_TARGET) $(EXTRA_TARGETS)) \
+__build: $(if $(KBUILD_BUILTIN),$(O_TARGET) $(L_TARGET) $(extra-y)) \
 	 $(if $(KBUILD_MODULES),$(obj-m)) \
 	 $(subdir-ym) $(build-targets)
 	@:
@@ -198,7 +202,7 @@ cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
 %.o: %.S FORCE
 	$(call if_changed_dep,as_o_S)
 
-targets += $(real-objs-y) $(real-objs-m) $(EXTRA_TARGETS) $(MAKECMDGOALS) \
+targets += $(real-objs-y) $(real-objs-m) $(extra-y) $(MAKECMDGOALS) \
 	   $(build-targets)
 
 # Build the compiled-in targets

scripts/Makefile.clean

@@ -28,7 +28,7 @@ subdir-ymn      := $(sort $(subdir-ym) $(subdir-n) $(subdir-))
 
 # Add subdir path
 
-EXTRA_TARGETS	:= $(addprefix $(obj)/,$(EXTRA_TARGETS))
+extra-y		:= $(addprefix $(obj)/,$(extra-y) $(EXTRA_TARGETS))
 targets		:= $(addprefix $(obj)/,$(targets))
 clean-files	:= $(addprefix $(obj)/,$(clean-files))
 host-progs	:= $(addprefix $(obj)/,$(host-progs))
@@ -36,7 +36,7 @@ subdir-ymn	:= $(addprefix $(obj)/,$(subdir-ymn))
 
 # ==========================================================================
 
-__clean-files := $(wildcard $(EXTRA_TARGETS) $(host-progs) $(clean-files) $(targets))
+__clean-files := $(wildcard $(extra-y) $(host-progs) $(clean-files) $(targets))
 
 quiet_cmd_clean = CLEAN   $(obj)
       cmd_clean = rm -f $(__clean-files); $(clean-rule)

scripts/Makefile.lib

@@ -8,6 +8,8 @@ comma   := ,
 empty   :=
 space   := $(empty) $(empty)
 
+# Backward compatibility - to be removed...
+extra-y	+= $(EXTRA_TARGETS)
 # Figure out what we need to build from the various variables
 # ===========================================================================
 
@@ -51,7 +53,7 @@ multi-objs   := $(multi-objs-y) $(multi-objs-m)
 subdir-obj-y := $(foreach o,$(obj-y),$(if $(filter-out $(o),$(notdir $(o))),$(o)))
 
 # Replace multi-part objects by their individual parts, look at local dir only
-real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(EXTRA_TARGETS)
+real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
 real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
 
 # C code
@@ -84,7 +86,7 @@ host-cshobjs	:= $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
 
 # Add subdir path
 
-EXTRA_TARGETS	:= $(addprefix $(obj)/,$(EXTRA_TARGETS))
+extra-y		:= $(addprefix $(obj)/,$(extra-y))
 build-targets	:= $(addprefix $(obj)/,$(build-targets))
 targets		:= $(addprefix $(obj)/,$(targets))
 obj-y		:= $(addprefix $(obj)/,$(obj-y))