Commit f9ada374 authored by Erik Andrén's avatar Erik Andrén Committed by Mauro Carvalho Chehab

[media] gspca-stv06xx: Simplify register writes by avoiding special data structures

Signed-off-by: default avatarErik Andrén <erik.andren@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 664a41b8
...@@ -37,6 +37,8 @@ ...@@ -37,6 +37,8 @@
#define STV_ISOC_ENDPOINT_ADDR 0x81 #define STV_ISOC_ENDPOINT_ADDR 0x81
#define STV_R 0x0509
#define STV_REG23 0x0423 #define STV_REG23 0x0423
/* Control registers of the STV0600 ASIC */ /* Control registers of the STV0600 ASIC */
...@@ -61,7 +63,9 @@ ...@@ -61,7 +63,9 @@
/* Refers to the CIF 352x288 and QCIF 176x144 */ /* Refers to the CIF 352x288 and QCIF 176x144 */
/* 1: 288 lines, 2: 144 lines */ /* 1: 288 lines, 2: 144 lines */
#define STV_Y_CTRL 0x15c3 #define STV_Y_CTRL 0x15c3
#define STV_RESET 0x1620
/* 0xa: 352 columns, 0x6: 176 columns */ /* 0xa: 352 columns, 0x6: 176 columns */
#define STV_X_CTRL 0x1680 #define STV_X_CTRL 0x1680
......
...@@ -216,22 +216,23 @@ struct stv_init { ...@@ -216,22 +216,23 @@ struct stv_init {
u8 len; u8 len;
}; };
static const u8 x1500[] = { /* 0x1500 - 0x150f */
0x0b, 0xa7, 0xb7, 0x00, 0x00
};
static const u8 x1536[] = { /* 0x1536 - 0x153b */
0x02, 0x00, 0x60, 0x01, 0x20, 0x01
};
static const struct stv_init stv_bridge_init[] = { static const struct stv_init stv_bridge_init[] = {
/* This reg is written twice. Some kind of reset? */ /* This reg is written twice. Some kind of reset? */
{NULL, 0x1620, 0x80}, {NULL, STV_RESET, 0x80},
{NULL, 0x1620, 0x00}, {NULL, STV_RESET, 0x00},
{NULL, 0x1443, 0x00}, {NULL, STV_SCAN_RATE, 0x00},
{NULL, 0x1423, 0x04}, {NULL, STV_I2C_FLUSH, 0x04},
{x1500, 0x1500, ARRAY_SIZE(x1500)}, {NULL, STV_REG00, 0x0b},
{x1536, 0x1536, ARRAY_SIZE(x1536)}, {NULL, STV_REG01, 0xa7},
{NULL, STV_REG02, 0xb7},
{NULL, STV_REG03, 0x00},
{NULL, STV_REG04, 0x00},
{NULL, 0x1536, 0x02},
{NULL, 0x1537, 0x00},
{NULL, 0x1538, 0x60},
{NULL, 0x1539, 0x01},
{NULL, 0x153a, 0x20},
{NULL, 0x153b, 0x01},
}; };
static const u8 vv6410_sensor_init[][2] = { static const u8 vv6410_sensor_init[][2] = {
...@@ -240,7 +241,7 @@ static const u8 vv6410_sensor_init[][2] = { ...@@ -240,7 +241,7 @@ static const u8 vv6410_sensor_init[][2] = {
{VV6410_SETUP0, VV6410_LOW_POWER_MODE}, {VV6410_SETUP0, VV6410_LOW_POWER_MODE},
/* Use shuffled read-out mode */ /* Use shuffled read-out mode */
{VV6410_SETUP1, BIT(6)}, {VV6410_SETUP1, BIT(6)},
/* All modes to 1 */ /* All modes to 1, FST, Fast QCK, Free running QCK, Free running LST, FST will qualify visible pixels */
{VV6410_FGMODES, BIT(6) | BIT(4) | BIT(2) | BIT(0)}, {VV6410_FGMODES, BIT(6) | BIT(4) | BIT(2) | BIT(0)},
{VV6410_PINMAPPING, 0x00}, {VV6410_PINMAPPING, 0x00},
/* Pre-clock generator divide off */ /* Pre-clock generator divide off */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment