Commit fa5527cd authored by Ivan Kalvachev's avatar Ivan Kalvachev Committed by Mauro Carvalho Chehab

[media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)

It is mostly copy/paste of the 520e code with setting GPIO7 removed
(no LED light).

I've worked on just released vanilla linux-3.3.0 kernel, so there may
be 1/2 lines offset to the internal working source, but most of the
code should apply cleanly.

I was able to get the DVB-C working (tuned and watched TV). Haven't
tested DVB-T (no signal atm).

Special thanks to everybody who worked on the code and to Antti
Palosaari and Devin Heitmueller who provided essential support on irc.

Hardware is based of:
Empia EM2884
Micronas DRX 3926K
NXP TDA18271HDC2
AVF4910 (not used atm)
Signed-off-by: default avatarIvan Kalvachev <ikalvachev@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent c247d7b1
...@@ -364,6 +364,19 @@ static struct em28xx_reg_seq maxmedia_ub425_tc[] = { ...@@ -364,6 +364,19 @@ static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
{-1, -1, -1, -1}, {-1, -1, -1, -1},
}; };
/* 2304:0242 PCTV QuatroStick (510e)
* GPIO_2: decoder reset, 0=active
* GPIO_4: decoder suspend, 0=active
* GPIO_6: demod reset, 0=active
* GPIO_7: LED, 1=active
*/
static struct em28xx_reg_seq pctv_510e[] = {
{EM2874_R80_GPIO, 0x10, 0xff, 100},
{EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
{EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
{ -1, -1, -1, -1},
};
/* 2013:0251 PCTV QuatroStick nano (520e) /* 2013:0251 PCTV QuatroStick nano (520e)
* GPIO_2: decoder reset, 0=active * GPIO_2: decoder reset, 0=active
* GPIO_4: decoder suspend, 0=active * GPIO_4: decoder suspend, 0=active
...@@ -1944,6 +1957,18 @@ struct em28xx_board em28xx_boards[] = { ...@@ -1944,6 +1957,18 @@ struct em28xx_board em28xx_boards[] = {
EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ, EM28XX_I2C_FREQ_400_KHZ,
}, },
/* 2304:0242 PCTV QuatroStick (510e)
* Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
[EM2884_BOARD_PCTV_510E] = {
.name = "PCTV QuatroStick (510e)",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_510e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
/* 2013:0251 PCTV QuatroStick nano (520e) /* 2013:0251 PCTV QuatroStick nano (520e)
* Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
[EM2884_BOARD_PCTV_520E] = { [EM2884_BOARD_PCTV_520E] = {
...@@ -2109,6 +2134,8 @@ struct usb_device_id em28xx_id_table[] = { ...@@ -2109,6 +2134,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2860_BOARD_EASYCAP }, .driver_info = EM2860_BOARD_EASYCAP },
{ USB_DEVICE(0x1b80, 0xe425), { USB_DEVICE(0x1b80, 0xe425),
.driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
{ USB_DEVICE(0x2304, 0x0242),
.driver_info = EM2884_BOARD_PCTV_510E },
{ USB_DEVICE(0x2013, 0x0251), { USB_DEVICE(0x2013, 0x0251),
.driver_info = EM2884_BOARD_PCTV_520E }, .driver_info = EM2884_BOARD_PCTV_520E },
{ }, { },
......
...@@ -338,6 +338,13 @@ struct drxk_config pctv_520e_drxk = { ...@@ -338,6 +338,13 @@ struct drxk_config pctv_520e_drxk = {
.chunk_size = 58, .chunk_size = 58,
}; };
struct drxk_config pctv_520e_drxk = {
.adr = 0x29,
.single_master = 1,
.microcode_name = "dvb-demod-drxk-pctv.fw",
.chunk_size = 58,
};
static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
{ {
struct em28xx_dvb *dvb = fe->sec_priv; struct em28xx_dvb *dvb = fe->sec_priv;
...@@ -498,6 +505,33 @@ static void pctv_520e_init(struct em28xx *dev) ...@@ -498,6 +505,33 @@ static void pctv_520e_init(struct em28xx *dev)
i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len); i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
}; };
static void pctv_520e_init(struct em28xx *dev)
{
/*
* Init TDA8295(?) analog demodulator. Looks like I2C traffic to
* digital demodulator and tuner are routed via TDA8295.
*/
int i;
struct {
unsigned char r[4];
int len;
} regs[] = {
{{ 0x06, 0x02, 0x00, 0x31 }, 4},
{{ 0x01, 0x02 }, 2},
{{ 0x01, 0x02, 0x00, 0xc6 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0xff, 0xaf }, 4},
{{ 0x01, 0x00, 0x03, 0xa0 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0x73, 0xaf }, 4},
};
dev->i2c_client.addr = 0x82 >> 1; /* 0x41 */
for (i = 0; i < ARRAY_SIZE(regs); i++)
i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
};
static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe) static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe)
{ {
/* Values extracted from a USB trace of the Terratec Windows driver */ /* Values extracted from a USB trace of the Terratec Windows driver */
...@@ -1002,6 +1036,25 @@ static int em28xx_dvb_init(struct em28xx *dev) ...@@ -1002,6 +1036,25 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2884_BOARD_PCTV_520E: case EM2884_BOARD_PCTV_520E:
pctv_520e_init(dev); pctv_520e_init(dev);
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &pctv_520e_drxk,
&dev->i2c_adap);
if (dvb->fe[0]) {
/* attach tuner */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
&dev->i2c_adap,
&em28xx_cxd2820r_tda18271_config)) {
dvb_frontend_detach(dvb->fe[0]);
result = -EINVAL;
goto out_free;
}
}
break;
case EM2884_BOARD_PCTV_510E:
case EM2884_BOARD_PCTV_520E:
pctv_520e_init(dev);
/* attach demodulator */ /* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &pctv_520e_drxk, dvb->fe[0] = dvb_attach(drxk_attach, &pctv_520e_drxk,
&dev->i2c_adap); &dev->i2c_adap);
......
...@@ -126,7 +126,8 @@ ...@@ -126,7 +126,8 @@
#define EM2884_BOARD_CINERGY_HTC_STICK 82 #define EM2884_BOARD_CINERGY_HTC_STICK 82
#define EM2860_BOARD_HT_VIDBOX_NW03 83 #define EM2860_BOARD_HT_VIDBOX_NW03 83
#define EM2874_BOARD_MAXMEDIA_UB425_TC 84 #define EM2874_BOARD_MAXMEDIA_UB425_TC 84
#define EM2884_BOARD_PCTV_520E 85 #define EM2884_BOARD_PCTV_510E 85
#define EM2884_BOARD_PCTV_520E 86
/* Limits minimum and default number of buffers */ /* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4 #define EM28XX_MIN_BUF 4
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment