staging: rts5208: add support for rts5208 and rts5288

There are still many rts5208/5288 card readers being used, but no
drivers are supported them in kernel now. This driver can make a
great convenience for people who use them.

Many other rts-series card reader are supported by mfd driver, but due
to much difference with others, rts5208/5288 can not add into mfd driver
pretty now, so we provide a separated driver here to support the device.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/Kconfig

@@ -54,6 +54,8 @@ source "drivers/staging/rtl8188eu/Kconfig"
 
 source "drivers/staging/rts5139/Kconfig"
 
+source "drivers/staging/rts5208/Kconfig"
+
 source "drivers/staging/frontier/Kconfig"
 
 source "drivers/staging/phison/Kconfig"

drivers/staging/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_RTL8192E)		+= rtl8192e/
 obj-$(CONFIG_R8712U)		+= rtl8712/
 obj-$(CONFIG_R8188EU)		+= rtl8188eu/
 obj-$(CONFIG_RTS5139)		+= rts5139/
+obj-$(CONFIG_RTS5208)		+= rts5208/
 obj-$(CONFIG_TRANZPORT)		+= frontier/
 obj-$(CONFIG_IDE_PHISON)	+= phison/
 obj-$(CONFIG_LINE6_USB)		+= line6/

drivers/staging/rts5208/Kconfig

+config RTS5208
+	tristate "Realtek PCI-E Card Reader RTS5208/5288 support"
+	depends on PCI && SCSI
+	help
+	  Say Y here to include driver code to support the Realtek
+	  PCI-E card reader rts5208/rts5288.
+
+	  If this driver is compiled as a module, it will be named rts5208.
+
+config RTS5208_DEBUG
+	bool "Realtek PCI-E Card Reader RTS5208/5288 verbose debug"
+	depends on RTS5208
+	help
+	  Say Y here in order to have the rts5208 code generate
+	  verbose debugging messages.

drivers/staging/rts5208/Makefile

+obj-$(CONFIG_RTS5208) := rts5208.o
+
+ccflags-y := -Idrivers/scsi
+
+rts5208-y := rtsx.o rtsx_chip.o rtsx_transport.o rtsx_scsi.o \
+	rtsx_card.o general.o sd.o xd.o ms.o spi.o

drivers/staging/rts5208/TODO

+TODO:
+- use kernel coding style
+- checkpatch.pl fixes
+- We will use the stack in drivers/mmc to implement
+  rts5208/5288 in the future
+
+Micky Ching <micky_ching@realsil.com.cn>
\ No newline at end of file

drivers/staging/rts5208/debug.h

+/* Driver for Realtek PCI-Express card reader
+ * Header file
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG (wei_wang@realsil.com.cn)
+ *   Micky Ching (micky_ching@realsil.com.cn)
+ */
+
+#ifndef __REALTEK_RTSX_DEBUG_H
+#define __REALTEK_RTSX_DEBUG_H
+
+#include <linux/kernel.h>
+
+#define RTSX_STOR "rts5208: "
+
+#ifdef CONFIG_RTS5208_DEBUG
+#define RTSX_DEBUGP(x...) pr_debug(RTSX_STOR x)
+#define RTSX_DEBUGPN(x...) pr_debug(x)
+#define RTSX_DEBUGPX(x...) printk(x)
+#define RTSX_DEBUG(x) x
+#else
+#define RTSX_DEBUGP(x...)
+#define RTSX_DEBUGPN(x...)
+#define RTSX_DEBUGPX(x...)
+#define RTSX_DEBUG(x)
+#endif
+
+#endif   /* __REALTEK_RTSX_DEBUG_H */

drivers/staging/rts5208/general.c

+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG (wei_wang@realsil.com.cn)
+ *   Micky Ching (micky_ching@realsil.com.cn)
+ */
+
+#include "general.h"
+
+int bit1cnt_long(u32 data)
+{
+	int i, cnt = 0;
+	for (i = 0; i < 32; i++) {
+		if (data & 0x01)
+			cnt++;
+		data >>= 1;
+	}
+	return cnt;
+}
+

drivers/staging/rts5208/general.h

+/* Driver for Realtek PCI-Express card reader
+ * Header file
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG (wei_wang@realsil.com.cn)
+ *   Micky Ching (micky_ching@realsil.com.cn)
+ */
+
+#ifndef __RTSX_GENERAL_H
+#define __RTSX_GENERAL_H
+
+#include "rtsx.h"
+
+int bit1cnt_long(u32 data);
+
+#endif /* __RTSX_GENERAL_H */

drivers/staging/rts5208/ms.h

+/* Driver for Realtek PCI-Express card reader
+ * Header file
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG (wei_wang@realsil.com.cn)
+ *   Micky Ching (micky_ching@realsil.com.cn)
+ */
+
+#ifndef __REALTEK_RTSX_MS_H
+#define __REALTEK_RTSX_MS_H
+
+#define MS_DELAY_WRITE
+
+#define	MS_MAX_RETRY_COUNT	3
+
+#define	MS_EXTRA_SIZE		0x9
+
+#define	WRT_PRTCT		0x01
+
+/* Error Code */
+#define	MS_NO_ERROR				0x00
+#define	MS_CRC16_ERROR				0x80
+#define	MS_TO_ERROR				0x40
+#define	MS_NO_CARD				0x20
+#define	MS_NO_MEMORY				0x10
+#define	MS_CMD_NK				0x08
+#define	MS_FLASH_READ_ERROR			0x04
+#define	MS_FLASH_WRITE_ERROR			0x02
+#define	MS_BREQ_ERROR				0x01
+#define	MS_NOT_FOUND				0x03
+
+/* Transfer Protocol Command */
+#define READ_PAGE_DATA				0x02
+#define READ_REG				0x04
+#define	GET_INT					0x07
+#define WRITE_PAGE_DATA				0x0D
+#define WRITE_REG				0x0B
+#define SET_RW_REG_ADRS				0x08
+#define SET_CMD					0x0E
+
+#define	PRO_READ_LONG_DATA			0x02
+#define	PRO_READ_SHORT_DATA			0x03
+#define PRO_READ_REG				0x04
+#define	PRO_READ_QUAD_DATA			0x05
+#define PRO_GET_INT				0x07
+#define	PRO_WRITE_LONG_DATA			0x0D
+#define	PRO_WRITE_SHORT_DATA			0x0C
+#define	PRO_WRITE_QUAD_DATA			0x0A
+#define PRO_WRITE_REG				0x0B
+#define PRO_SET_RW_REG_ADRS			0x08
+#define PRO_SET_CMD				0x0E
+#define PRO_EX_SET_CMD				0x09
+
+#ifdef SUPPORT_MAGIC_GATE
+
+#define MG_GET_ID		0x40
+#define MG_SET_LID		0x41
+#define MG_GET_LEKB		0x42
+#define MG_SET_RD		0x43
+#define MG_MAKE_RMS		0x44
+#define MG_MAKE_KSE		0x45
+#define MG_SET_IBD		0x46
+#define MG_GET_IBD		0x47
+
+#endif
+
+#ifdef XC_POWERCLASS
+#define XC_CHG_POWER		0x16
+#endif
+
+#define BLOCK_READ	0xAA
+#define	BLOCK_WRITE	0x55
+#define BLOCK_END	0x33
+#define BLOCK_ERASE	0x99
+#define FLASH_STOP	0xCC
+
+#define SLEEP		0x5A
+#define CLEAR_BUF	0xC3
+#define MS_RESET	0x3C
+
+#define PRO_READ_DATA		0x20
+#define	PRO_WRITE_DATA		0x21
+#define PRO_READ_ATRB		0x24
+#define PRO_STOP		0x25
+#define PRO_ERASE		0x26
+#define	PRO_READ_2K_DATA	0x27
+#define	PRO_WRITE_2K_DATA	0x28
+
+#define PRO_FORMAT		0x10
+#define PRO_SLEEP		0x11
+
+#define	IntReg			0x01
+#define StatusReg0		0x02
+#define StatusReg1		0x03
+
+#define SystemParm		0x10
+#define BlockAdrs		0x11
+#define CMDParm			0x14
+#define PageAdrs		0x15
+
+#define OverwriteFlag		0x16
+#define ManagemenFlag		0x17
+#define LogicalAdrs		0x18
+#define ReserveArea		0x1A
+
+#define	Pro_IntReg		0x01
+#define Pro_StatusReg		0x02
+#define Pro_TypeReg		0x04
+#define	Pro_IFModeReg		0x05
+#define Pro_CatagoryReg		0x06
+#define Pro_ClassReg		0x07
+
+
+#define Pro_SystemParm		0x10
+#define Pro_DataCount1		0x11
+#define Pro_DataCount0		0x12
+#define Pro_DataAddr3		0x13
+#define Pro_DataAddr2		0x14
+#define Pro_DataAddr1		0x15
+#define Pro_DataAddr0		0x16
+
+#define Pro_TPCParm		0x17
+#define Pro_CMDParm		0x18
+
+#define	INT_REG_CED		0x80
+#define	INT_REG_ERR		0x40
+#define	INT_REG_BREQ		0x20
+#define	INT_REG_CMDNK		0x01
+
+#define	BLOCK_BOOT		0xC0
+#define	BLOCK_OK		0x80
+#define	PAGE_OK			0x60
+#define	DATA_COMPL		0x10
+
+#define	NOT_BOOT_BLOCK		0x4
+#define	NOT_TRANSLATION_TABLE	0x8
+
+#define	HEADER_ID0		PPBUF_BASE2
+#define	HEADER_ID1		(PPBUF_BASE2 + 1)
+#define	DISABLED_BLOCK0		(PPBUF_BASE2 + 0x170 + 4)
+#define	DISABLED_BLOCK1		(PPBUF_BASE2 + 0x170 + 5)
+#define	DISABLED_BLOCK2		(PPBUF_BASE2 + 0x170 + 6)
+#define	DISABLED_BLOCK3		(PPBUF_BASE2 + 0x170 + 7)
+#define	BLOCK_SIZE_0		(PPBUF_BASE2 + 0x1a0 + 2)
+#define	BLOCK_SIZE_1		(PPBUF_BASE2 + 0x1a0 + 3)
+#define	BLOCK_COUNT_0		(PPBUF_BASE2 + 0x1a0 + 4)
+#define	BLOCK_COUNT_1		(PPBUF_BASE2 + 0x1a0 + 5)
+#define	EBLOCK_COUNT_0		(PPBUF_BASE2 + 0x1a0 + 6)
+#define	EBLOCK_COUNT_1		(PPBUF_BASE2 + 0x1a0 + 7)
+#define	PAGE_SIZE_0		(PPBUF_BASE2 + 0x1a0 + 8)
+#define	PAGE_SIZE_1		(PPBUF_BASE2 + 0x1a0 + 9)
+
+#define MS_Device_Type		(PPBUF_BASE2 + 0x1D8)
+
+#define	MS_4bit_Support		(PPBUF_BASE2 + 0x1D3)
+
+#define setPS_NG	1
+#define setPS_Error	0
+
+#define	PARALLEL_8BIT_IF	0x40
+#define	PARALLEL_4BIT_IF	0x00
+#define	SERIAL_IF		0x80
+
+#define BUF_FULL	0x10
+#define BUF_EMPTY	0x20
+
+#define	MEDIA_BUSY	0x80
+#define	FLASH_BUSY	0x40
+#define	DATA_ERROR	0x20
+#define	STS_UCDT	0x10
+#define	EXTRA_ERROR	0x08
+#define	STS_UCEX	0x04
+#define	FLAG_ERROR	0x02
+#define	STS_UCFG	0x01
+
+#define MS_SHORT_DATA_LEN	32
+
+#define FORMAT_SUCCESS		0
+#define FORMAT_FAIL		1
+#define FORMAT_IN_PROGRESS	2
+
+#define	MS_SET_BAD_BLOCK_FLG(ms_card)	((ms_card)->multi_flag |= 0x80)
+#define MS_CLR_BAD_BLOCK_FLG(ms_card)	((ms_card)->multi_flag &= 0x7F)
+#define MS_TST_BAD_BLOCK_FLG(ms_card)	((ms_card)->multi_flag & 0x80)
+
+void mspro_polling_format_status(struct rtsx_chip *chip);
+
+void mspro_stop_seq_mode(struct rtsx_chip *chip);
+int reset_ms_card(struct rtsx_chip *chip);
+int ms_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip,
+	u32 start_sector, u16 sector_cnt);
+int mspro_format(struct scsi_cmnd *srb, struct rtsx_chip *chip,
+		int short_data_len, int quick_format);
+void ms_free_l2p_tbl(struct rtsx_chip *chip);
+void ms_cleanup_work(struct rtsx_chip *chip);
+int ms_power_off_card3v3(struct rtsx_chip *chip);
+int release_ms_card(struct rtsx_chip *chip);
+#ifdef MS_DELAY_WRITE
+int ms_delay_write(struct rtsx_chip *chip);
+#endif
+
+#ifdef SUPPORT_MAGIC_GATE
+int mg_set_leaf_id(struct scsi_cmnd *srb, struct rtsx_chip *chip);
+int mg_get_local_EKB(struct scsi_cmnd *srb, struct rtsx_chip *chip);
+int mg_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip);
+int mg_get_rsp_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip);
+int mg_rsp(struct scsi_cmnd *srb, struct rtsx_chip *chip);
+int mg_get_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip);
+int mg_set_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip);
+#endif
+
+#endif  /* __REALTEK_RTSX_MS_H */

drivers/staging/rts5208/rtsx.h

+/* Driver for Realtek PCI-Express card reader
+ * Header file
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG (wei_wang@realsil.com.cn)
+ *   Micky Ching (micky_ching@realsil.com.cn)
+ */
+
+#ifndef __REALTEK_RTSX_H
+#define __REALTEK_RTSX_H
+
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/mutex.h>
+#include <linux/cdrom.h>
+#include <linux/workqueue.h>
+#include <linux/timer.h>
+#include <linux/time.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_devinfo.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+
+#include "debug.h"
+#include "trace.h"
+#include "general.h"
+
+#define CR_DRIVER_NAME		"rts5208"
+
+#define pci_get_bus_and_slot(bus, devfn)	\
+	pci_get_domain_bus_and_slot(0, (bus), (devfn))
+
+/*
+ * macros for easy use
+ */
+#define rtsx_writel(chip, reg, value) \
+	iowrite32(value, (chip)->rtsx->remap_addr + reg)
+#define rtsx_readl(chip, reg) \
+	ioread32((chip)->rtsx->remap_addr + reg)
+#define rtsx_writew(chip, reg, value) \
+	iowrite16(value, (chip)->rtsx->remap_addr + reg)
+#define rtsx_readw(chip, reg) \
+	ioread16((chip)->rtsx->remap_addr + reg)
+#define rtsx_writeb(chip, reg, value) \
+	iowrite8(value, (chip)->rtsx->remap_addr + reg)
+#define rtsx_readb(chip, reg) \
+	ioread8((chip)->rtsx->remap_addr + reg)
+
+#define rtsx_read_config_byte(chip, where, val) \
+	pci_read_config_byte((chip)->rtsx->pci, where, val)
+
+#define rtsx_write_config_byte(chip, where, val) \
+	pci_write_config_byte((chip)->rtsx->pci, where, val)
+
+#define wait_timeout_x(task_state, msecs)		\
+do {							\
+		set_current_state((task_state));	\
+		schedule_timeout((msecs) * HZ / 1000);	\
+} while (0)
+#define wait_timeout(msecs)	wait_timeout_x(TASK_INTERRUPTIBLE, (msecs))
+
+
+#define STATE_TRANS_NONE	0
+#define STATE_TRANS_CMD		1
+#define STATE_TRANS_BUF		2
+#define STATE_TRANS_SG		3
+
+#define TRANS_NOT_READY		0
+#define TRANS_RESULT_OK		1
+#define TRANS_RESULT_FAIL	2
+
+#define SCSI_LUN(srb)		((srb)->device->lun)
+
+typedef unsigned long DELAY_PARA_T;
+
+struct rtsx_chip;
+
+struct rtsx_dev {
+	struct pci_dev *pci;
+
+	/* pci resources */
+	unsigned long		addr;
+	void __iomem		*remap_addr;
+	int irq;
+
+	/* locks */
+	spinlock_t		reg_lock;
+
+	struct task_struct	*ctl_thread;	 /* the control thread   */
+	struct task_struct	*polling_thread; /* the polling thread   */
+
+	/* mutual exclusion and synchronization structures */
+	struct completion	cmnd_ready;	 /* to sleep thread on	    */
+	struct completion	control_exit;	 /* control thread exit	    */
+	struct completion	polling_exit;	 /* polling thread exit	    */
+	struct completion	notify;		 /* thread begin/end	    */
+	struct completion	scanning_done;	 /* wait for scan thread    */
+
+	wait_queue_head_t	delay_wait;	 /* wait during scan, reset */
+	struct mutex		dev_mutex;
+
+	/* host reserved buffer */
+	void			*rtsx_resv_buf;
+	dma_addr_t		rtsx_resv_buf_addr;
+
+	char			trans_result;
+	char			trans_state;
+
+	struct completion	*done;
+	/* Whether interrupt handler should care card cd info */
+	u32			check_card_cd;
+
+	struct rtsx_chip	*chip;
+};
+
+typedef struct rtsx_dev rtsx_dev_t;
+
+/* Convert between rtsx_dev and the corresponding Scsi_Host */
+static inline struct Scsi_Host *rtsx_to_host(struct rtsx_dev *dev)
+{
+	return container_of((void *) dev, struct Scsi_Host, hostdata);
+}
+static inline struct rtsx_dev *host_to_rtsx(struct Scsi_Host *host)
+{
+	return (struct rtsx_dev *) host->hostdata;
+}
+
+static inline void get_current_time(u8 *timeval_buf, int buf_len)
+{
+	struct timeval tv;
+
+	if (!timeval_buf || (buf_len < 8))
+		return;
+
+	do_gettimeofday(&tv);
+
+	timeval_buf[0] = (u8)(tv.tv_sec >> 24);
+	timeval_buf[1] = (u8)(tv.tv_sec >> 16);
+	timeval_buf[2] = (u8)(tv.tv_sec >> 8);
+	timeval_buf[3] = (u8)(tv.tv_sec);
+	timeval_buf[4] = (u8)(tv.tv_usec >> 24);
+	timeval_buf[5] = (u8)(tv.tv_usec >> 16);
+	timeval_buf[6] = (u8)(tv.tv_usec >> 8);
+	timeval_buf[7] = (u8)(tv.tv_usec);
+}
+
+/* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
+ * single queue element srb for write access */
+#define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
+#define scsi_lock(host)		spin_lock_irq(host->host_lock)
+
+#define lock_state(chip)	spin_lock_irq(&((chip)->rtsx->reg_lock))
+#define unlock_state(chip)	spin_unlock_irq(&((chip)->rtsx->reg_lock))
+
+/* struct scsi_cmnd transfer buffer access utilities */
+enum xfer_buf_dir	{TO_XFER_BUF, FROM_XFER_BUF};
+
+int rtsx_read_pci_cfg_byte(u8 bus, u8 dev, u8 func, u8 offset, u8 *val);
+
+#endif  /* __REALTEK_RTSX_H */

drivers/staging/rts5208/rtsx_sys.h

+/* Driver for Realtek PCI-Express card reader
+ * Header file
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG (wei_wang@realsil.com.cn)
+ *   Micky Ching (micky_ching@realsil.com.cn)
+ */
+
+#ifndef __RTSX_SYS_H
+#define __RTSX_SYS_H
+
+#include "rtsx.h"
+#include "rtsx_chip.h"
+#include "rtsx_card.h"
+
+typedef dma_addr_t ULONG_PTR;
+
+static inline void rtsx_exclusive_enter_ss(struct rtsx_chip *chip)
+{
+	struct rtsx_dev *dev = chip->rtsx;
+
+	spin_lock(&(dev->reg_lock));
+	rtsx_enter_ss(chip);
+	spin_unlock(&(dev->reg_lock));
+}
+
+static inline void rtsx_reset_detected_cards(struct rtsx_chip *chip, int flag)
+{
+	rtsx_reset_cards(chip);
+}
+
+#define RTSX_MSG_IN_INT(x)
+
+#endif  /* __RTSX_SYS_H */
+

drivers/staging/rts5208/rtsx_transport.h

+/* Driver for Realtek PCI-Express card reader
+ * Header file
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG (wei_wang@realsil.com.cn)
+ *   Micky Ching (micky_ching@realsil.com.cn)
+ */
+
+#ifndef __REALTEK_RTSX_TRANSPORT_H
+#define __REALTEK_RTSX_TRANSPORT_H
+
+#include "rtsx.h"
+#include "rtsx_chip.h"
+
+#define WAIT_TIME	2000
+
+unsigned int rtsx_stor_access_xfer_buf(unsigned char *buffer,
+	unsigned int buflen, struct scsi_cmnd *srb, unsigned int *index,
+	unsigned int *offset, enum xfer_buf_dir dir);
+void rtsx_stor_set_xfer_buf(unsigned char *buffer,
+	unsigned int buflen, struct scsi_cmnd *srb);
+void rtsx_stor_get_xfer_buf(unsigned char *buffer,
+	unsigned int buflen, struct scsi_cmnd *srb);
+void rtsx_invoke_transport(struct scsi_cmnd *srb, struct rtsx_chip *chip);
+
+
+#define rtsx_init_cmd(chip)			((chip)->ci = 0)
+
+void rtsx_add_cmd(struct rtsx_chip *chip,
+		u8 cmd_type, u16 reg_addr, u8 mask, u8 data);
+void rtsx_send_cmd_no_wait(struct rtsx_chip *chip);
+int rtsx_send_cmd(struct rtsx_chip *chip, u8 card, int timeout);
+
+extern inline u8 *rtsx_get_cmd_data(struct rtsx_chip *chip)
+{
+#ifdef CMD_USING_SG
+	return (u8 *)(chip->host_sg_tbl_ptr);
+#else
+	return (u8 *)(chip->host_cmds_ptr);
+#endif
+}
+
+int rtsx_transfer_data(struct rtsx_chip *chip, u8 card, void *buf, size_t len,
+		int use_sg, enum dma_data_direction dma_dir, int timeout);
+
+int rtsx_transfer_data_partial(struct rtsx_chip *chip, u8 card,
+			void *buf, size_t len,
+			int use_sg, unsigned int *index, unsigned int *offset,
+			enum dma_data_direction dma_dir, int timeout);
+
+#endif   /* __REALTEK_RTSX_TRANSPORT_H */