Merge commit 'jwb/jwb-next'

arch/powerpc/boot/dts/arches.dts

+/*
+ * Device Tree Source for AMCC Arches (dual 460GT board)
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Victor Gallardo <vgallardo@amcc.com>
+ * Adam Graham <agraham@amcc.com>
+ *
+ * Based on the glacier.dts file
+ *   Stefan Roese <sr@denx.de>
+ *   Copyright 2008 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,arches";
+	compatible = "amcc,arches";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <3>;
+			num-rx-chans = <24>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "sgmii";
+				phy-map = <0xffffffff>;
+				gpcs-address = <0x0000000a>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "sgmii";
+				phy-map = <0x00000000>;
+				gpcs-address = <0x0000000b>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "sgmii";
+				phy-map = <0x00000001>;
+				gpcs-address = <0x0000000C>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+	};
+};

arch/powerpc/include/asm/dcr-regs.h

@@ -68,6 +68,17 @@
 #define SDR0_UART3		0x0123
 #define SDR0_CUST0		0x4000
 
+/* SDR for 405EZ */
+#define DCRN_SDR_ICINTSTAT	0x4510
+#define ICINTSTAT_ICRX	0x80000000
+#define ICINTSTAT_ICTX0	0x40000000
+#define ICINTSTAT_ICTX1 0x20000000
+#define ICINTSTAT_ICTX	0x60000000
+
+/* SDRs (460EX/460GT) */
+#define SDR0_ETH_CFG		0x4103
+#define SDR0_ETH_CFG_ECS	0x00000100	/* EMAC int clk source */
+
 /*
  * All those DCR register addresses are offsets from the base address
  * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is

arch/powerpc/platforms/44x/Kconfig

@@ -81,6 +81,17 @@ config WARP
 	  See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
 	  Telephony Developers" link for more information.
 
+config ARCHES
+	bool "Arches"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 460EX # Odd since it uses 460GT but the effects are the same
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the AMCC Dual PPC460GT evaluation board.
+
 config CANYONLANDS
 	bool "Canyonlands"
 	depends on 44x
@@ -89,6 +100,8 @@ config CANYONLANDS
 	select 460EX
 	select PCI
 	select PPC4xx_PCI_EXPRESS
+	select IBM_NEW_EMAC_RGMII
+	select IBM_NEW_EMAC_ZMII
 	help
 	  This option enables support for the AMCC PPC460EX evaluation board.
 
@@ -100,6 +113,8 @@ config GLACIER
 	select 460EX # Odd since it uses 460GT but the effects are the same
 	select PCI
 	select PPC4xx_PCI_EXPRESS
+	select IBM_NEW_EMAC_RGMII
+	select IBM_NEW_EMAC_ZMII
 	help
 	  This option enables support for the AMCC PPC460GT evaluation board.
 
@@ -195,8 +210,6 @@ config 460EX
 	bool
 	select PPC_FPU
 	select IBM_NEW_EMAC_EMAC4
-	select IBM_NEW_EMAC_RGMII
-	select IBM_NEW_EMAC_ZMII
 	select IBM_NEW_EMAC_TAH
 
 # 44x errata/workaround config symbols, selected by the CPU models above

arch/powerpc/platforms/44x/ppc44x_simple.c

@@ -50,8 +50,9 @@ machine_device_initcall(ppc44x_simple, ppc44x_device_probe);
  * board.c file for it rather than adding it to this list.
  */
 static char *board[] __initdata = {
+	"amcc,arches",
 	"amcc,bamboo",
-	"amcc,cayonlands",
+	"amcc,canyonlands",
 	"amcc,glacier",
 	"ibm,ebony",
 	"amcc,katmai",

arch/powerpc/sysdev/ppc4xx_pci.c

@@ -276,9 +276,16 @@ static void __init ppc4xx_probe_pci_bridge(struct device_node *np)
 	const int *bus_range;
 	int primary = 0;
 
+	/* Check if device is enabled */
+	if (!of_device_is_available(np)) {
+		printk(KERN_INFO "%s: Port disabled via device-tree\n",
+		       np->full_name);
+		return;
+	}
+
 	/* Fetch config space registers address */
 	if (of_address_to_resource(np, 0, &rsrc_cfg)) {
-		printk(KERN_ERR "%s:Can't get PCI config register base !",
+		printk(KERN_ERR "%s: Can't get PCI config register base !",
 		       np->full_name);
 		return;
 	}

drivers/net/ibm_newemac/Kconfig

@@ -62,3 +62,15 @@ config IBM_NEW_EMAC_TAH
 config IBM_NEW_EMAC_EMAC4
 	bool
 	default n
+
+config IBM_NEW_EMAC_NO_FLOW_CTRL
+	bool
+	default n
+
+config IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+	bool
+	default n
+
+config IBM_NEW_EMAC_MAL_COMMON_ERR
+	bool
+	default n

drivers/net/ibm_newemac/core.c

@@ -130,6 +130,7 @@ static inline void emac_report_timeout_error(struct emac_instance *dev,
 					     const char *error)
 {
 	if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
+				  EMAC_FTR_460EX_PHY_CLK_FIX |
 				  EMAC_FTR_440EP_PHY_CLK_FIX))
 		DBG(dev, "%s" NL, error);
 	else if (net_ratelimit())
@@ -201,13 +202,15 @@ static inline int emac_phy_supports_gige(int phy_mode)
 {
 	return  phy_mode == PHY_MODE_GMII ||
 		phy_mode == PHY_MODE_RGMII ||
+		phy_mode == PHY_MODE_SGMII ||
 		phy_mode == PHY_MODE_TBI ||
 		phy_mode == PHY_MODE_RTBI;
 }
 
 static inline int emac_phy_gpcs(int phy_mode)
 {
-	return  phy_mode == PHY_MODE_TBI ||
+	return  phy_mode == PHY_MODE_SGMII ||
+		phy_mode == PHY_MODE_TBI ||
 		phy_mode == PHY_MODE_RTBI;
 }
 
@@ -351,10 +354,24 @@ static int emac_reset(struct emac_instance *dev)
 		emac_tx_disable(dev);
 	}
 
+#ifdef CONFIG_PPC_DCR_NATIVE
+	/* Enable internal clock source */
+	if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
+		dcri_clrset(SDR0, SDR0_ETH_CFG,
+			    0, SDR0_ETH_CFG_ECS << dev->cell_index);
+#endif
+
 	out_be32(&p->mr0, EMAC_MR0_SRST);
 	while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
 		--n;
 
+#ifdef CONFIG_PPC_DCR_NATIVE
+	 /* Enable external clock source */
+	if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
+		dcri_clrset(SDR0, SDR0_ETH_CFG,
+			    SDR0_ETH_CFG_ECS << dev->cell_index, 0);
+#endif
+
 	if (n) {
 		dev->reset_failed = 0;
 		return 0;
@@ -547,8 +564,9 @@ static int emac_configure(struct emac_instance *dev)
 	switch (dev->phy.speed) {
 	case SPEED_1000:
 		if (emac_phy_gpcs(dev->phy.mode)) {
-			mr1 |= EMAC_MR1_MF_1000GPCS |
-				EMAC_MR1_MF_IPPA(dev->phy.address);
+			mr1 |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_MF_IPPA(
+				(dev->phy.gpcs_address != 0xffffffff) ?
+				 dev->phy.gpcs_address : dev->phy.address);
 
 			/* Put some arbitrary OUI, Manuf & Rev IDs so we can
 			 * identify this GPCS PHY later.
@@ -660,8 +678,12 @@ static int emac_configure(struct emac_instance *dev)
 	out_be32(&p->iser,  r);
 
 	/* We need to take GPCS PHY out of isolate mode after EMAC reset */
-	if (emac_phy_gpcs(dev->phy.mode))
-		emac_mii_reset_phy(&dev->phy);
+	if (emac_phy_gpcs(dev->phy.mode)) {
+		if (dev->phy.gpcs_address != 0xffffffff)
+			emac_mii_reset_gpcs(&dev->phy);
+		else
+			emac_mii_reset_phy(&dev->phy);
+	}
 
 	return 0;
 }
@@ -866,7 +888,9 @@ static int emac_mdio_read(struct net_device *ndev, int id, int reg)
 	struct emac_instance *dev = netdev_priv(ndev);
 	int res;
 
-	res = __emac_mdio_read(dev->mdio_instance ? dev->mdio_instance : dev,
+	res = __emac_mdio_read((dev->mdio_instance &&
+				dev->phy.gpcs_address != id) ?
+				dev->mdio_instance : dev,
 			       (u8) id, (u8) reg);
 	return res;
 }
@@ -875,7 +899,9 @@ static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val)
 {
 	struct emac_instance *dev = netdev_priv(ndev);
 
-	__emac_mdio_write(dev->mdio_instance ? dev->mdio_instance : dev,
+	__emac_mdio_write((dev->mdio_instance &&
+			   dev->phy.gpcs_address != id) ?
+			   dev->mdio_instance : dev,
 			  (u8) id, (u8) reg, (u16) val);
 }
 
@@ -2367,7 +2393,11 @@ static int __devinit emac_init_phy(struct emac_instance *dev)
 		 * XXX I probably should move these settings to the dev tree
 		 */
 		dev->phy.address = -1;
-		dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII;
+		dev->phy.features = SUPPORTED_MII;
+		if (emac_phy_supports_gige(dev->phy_mode))
+			dev->phy.features |= SUPPORTED_1000baseT_Full;
+		else
+			dev->phy.features |= SUPPORTED_100baseT_Full;
 		dev->phy.pause = 1;
 
 		return 0;
@@ -2406,7 +2436,9 @@ static int __devinit emac_init_phy(struct emac_instance *dev)
 		 * Note that the busy_phy_map is currently global
 		 * while it should probably be per-ASIC...
 		 */
-		dev->phy.address = dev->cell_index;
+		dev->phy.gpcs_address = dev->gpcs_address;
+		if (dev->phy.gpcs_address == 0xffffffff)
+			dev->phy.address = dev->cell_index;
 	}
 
 	emac_configure(dev);
@@ -2516,6 +2548,8 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 		dev->phy_address = 0xffffffff;
 	if (emac_read_uint_prop(np, "phy-map", &dev->phy_map, 0))
 		dev->phy_map = 0xffffffff;
+	if (emac_read_uint_prop(np, "gpcs-address", &dev->gpcs_address, 0))
+		dev->gpcs_address = 0xffffffff;
 	if (emac_read_uint_prop(np->parent, "clock-frequency", &dev->opb_bus_freq, 1))
 		return -ENXIO;
 	if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0))
@@ -2559,6 +2593,9 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 	/* Check EMAC version */
 	if (of_device_is_compatible(np, "ibm,emac4sync")) {
 		dev->features |= (EMAC_FTR_EMAC4 | EMAC_FTR_EMAC4SYNC);
+		if (of_device_is_compatible(np, "ibm,emac-460ex") ||
+		    of_device_is_compatible(np, "ibm,emac-460gt"))
+			dev->features |= EMAC_FTR_460EX_PHY_CLK_FIX;
 	} else if (of_device_is_compatible(np, "ibm,emac4")) {
 		dev->features |= EMAC_FTR_EMAC4;
 		if (of_device_is_compatible(np, "ibm,emac-440gx"))
@@ -2567,6 +2604,8 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 		if (of_device_is_compatible(np, "ibm,emac-440ep") ||
 		    of_device_is_compatible(np, "ibm,emac-440gr"))
 			dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
+		if (of_device_is_compatible(np, "ibm,emac-405ez"))
+			dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x;
 	}
 
 	/* Fixup some feature bits based on the device tree */
@@ -2824,6 +2863,9 @@ static int __devinit emac_probe(struct of_device *ofdev,
 	       ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
 	       ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
 
+	if (dev->phy_mode == PHY_MODE_SGMII)
+		printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name);
+
 	if (dev->phy.address >= 0)
 		printk("%s: found %s PHY (0x%02x)\n", ndev->name,
 		       dev->phy.def->name, dev->phy.address);

drivers/net/ibm_newemac/core.h

@@ -190,6 +190,9 @@ struct emac_instance {
 	struct delayed_work		link_work;
 	int				link_polling;
 
+	/* GPCS PHY infos */
+	u32				gpcs_address;
+
 	/* Shared MDIO if any */
 	u32				mdio_ph;
 	struct of_device		*mdio_dev;
@@ -317,6 +320,10 @@ struct emac_instance {
  * The 405EX and 460EX contain the EMAC4SYNC core
  */
 #define EMAC_FTR_EMAC4SYNC		0x00000200
+/*
+ * Set if we need phy clock workaround for 460ex or 460gt
+ */
+#define EMAC_FTR_460EX_PHY_CLK_FIX	0x00000400
 
 
 /* Right now, we don't quite handle the always/possible masks on the
@@ -341,6 +348,10 @@ enum {
 #ifdef CONFIG_IBM_NEW_EMAC_RGMII
 	    EMAC_FTR_HAS_RGMII	|
 #endif
+#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL
+	    EMAC_FTR_NO_FLOW_CONTROL_40x |
+#endif
+	EMAC_FTR_460EX_PHY_CLK_FIX |
 	EMAC_FTR_440EP_PHY_CLK_FIX,
 };
 

drivers/net/ibm_newemac/mal.c

@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 
 #include "core.h"
+#include <asm/dcr-regs.h>
 
 static int mal_count;
 
@@ -279,6 +280,10 @@ static irqreturn_t mal_txeob(int irq, void *dev_instance)
 	mal_schedule_poll(mal);
 	set_mal_dcrn(mal, MAL_TXEOBISR, r);
 
+	if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT))
+		mtdcri(SDR0, DCRN_SDR_ICINTSTAT,
+				(mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICTX));
+
 	return IRQ_HANDLED;
 }
 
@@ -293,6 +298,10 @@ static irqreturn_t mal_rxeob(int irq, void *dev_instance)
 	mal_schedule_poll(mal);
 	set_mal_dcrn(mal, MAL_RXEOBISR, r);
 
+	if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT))
+		mtdcri(SDR0, DCRN_SDR_ICINTSTAT,
+				(mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICRX));
+
 	return IRQ_HANDLED;
 }
 
@@ -336,6 +345,25 @@ static irqreturn_t mal_rxde(int irq, void *dev_instance)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t mal_int(int irq, void *dev_instance)
+{
+	struct mal_instance *mal = dev_instance;
+	u32 esr = get_mal_dcrn(mal, MAL_ESR);
+
+	if (esr & MAL_ESR_EVB) {
+		/* descriptor error */
+		if (esr & MAL_ESR_DE) {
+			if (esr & MAL_ESR_CIDT)
+				return mal_rxde(irq, dev_instance);
+			else
+				return mal_txde(irq, dev_instance);
+		} else { /* SERR */
+			return mal_serr(irq, dev_instance);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
 void mal_poll_disable(struct mal_instance *mal, struct mal_commac *commac)
 {
 	/* Spinlock-type semantics: only one caller disable poll at a time */
@@ -493,6 +521,8 @@ static int __devinit mal_probe(struct of_device *ofdev,
 	unsigned int dcr_base;
 	const u32 *prop;
 	u32 cfg;
+	unsigned long irqflags;
+	irq_handler_t hdlr_serr, hdlr_txde, hdlr_rxde;
 
 	mal = kzalloc(sizeof(struct mal_instance), GFP_KERNEL);
 	if (!mal) {
@@ -542,11 +572,21 @@ static int __devinit mal_probe(struct of_device *ofdev,
 		goto fail;
 	}
 
+	if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez"))
+		mal->features |= (MAL_FTR_CLEAR_ICINTSTAT |
+				MAL_FTR_COMMON_ERR_INT);
+
 	mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0);
 	mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1);
 	mal->serr_irq = irq_of_parse_and_map(ofdev->node, 2);
-	mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3);
-	mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4);
+
+	if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
+		mal->txde_irq = mal->rxde_irq = mal->serr_irq;
+	} else {
+		mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3);
+		mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4);
+	}
+
 	if (mal->txeob_irq == NO_IRQ || mal->rxeob_irq == NO_IRQ ||
 	    mal->serr_irq == NO_IRQ || mal->txde_irq == NO_IRQ ||
 	    mal->rxde_irq == NO_IRQ) {
@@ -608,16 +648,26 @@ static int __devinit mal_probe(struct of_device *ofdev,
 			     sizeof(struct mal_descriptor) *
 			     mal_rx_bd_offset(mal, i));
 
-	err = request_irq(mal->serr_irq, mal_serr, 0, "MAL SERR", mal);
+	if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
+		irqflags = IRQF_SHARED;
+		hdlr_serr = hdlr_txde = hdlr_rxde = mal_int;
+	} else {
+		irqflags = 0;
+		hdlr_serr = mal_serr;
+		hdlr_txde = mal_txde;
+		hdlr_rxde = mal_rxde;
+	}
+
+	err = request_irq(mal->serr_irq, hdlr_serr, irqflags, "MAL SERR", mal);
 	if (err)
 		goto fail2;
-	err = request_irq(mal->txde_irq, mal_txde, 0, "MAL TX DE", mal);
+	err = request_irq(mal->txde_irq, hdlr_txde, irqflags, "MAL TX DE", mal);
 	if (err)
 		goto fail3;
 	err = request_irq(mal->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
 	if (err)
 		goto fail4;
-	err = request_irq(mal->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
+	err = request_irq(mal->rxde_irq, hdlr_rxde, irqflags, "MAL RX DE", mal);
 	if (err)
 		goto fail5;
 	err = request_irq(mal->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);

drivers/net/ibm_newemac/mal.h

@@ -213,6 +213,8 @@ struct mal_instance {
 	struct of_device	*ofdev;
 	int			index;
 	spinlock_t		lock;
+
+	unsigned int features;
 };
 
 static inline u32 get_mal_dcrn(struct mal_instance *mal, int reg)
@@ -225,6 +227,38 @@ static inline void set_mal_dcrn(struct mal_instance *mal, int reg, u32 val)
 	dcr_write(mal->dcr_host, reg, val);
 }
 
+/* Features of various MAL implementations */
+
+/* Set if you have interrupt coalescing and you have to clear the SDR
+ * register for TXEOB and RXEOB interrupts to work
+ */
+#define MAL_FTR_CLEAR_ICINTSTAT	0x00000001
+
+/* Set if your MAL has SERR, TXDE, and RXDE OR'd into a single UIC
+ * interrupt
+ */
+#define MAL_FTR_COMMON_ERR_INT	0x00000002
+
+enum {
+	MAL_FTRS_ALWAYS = 0,
+
+	MAL_FTRS_POSSIBLE =
+#ifdef CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+		MAL_FTR_CLEAR_ICINTSTAT |
+#endif
+#ifdef CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR
+		MAL_FTR_COMMON_ERR_INT |
+#endif
+		0,
+};
+
+static inline int mal_has_feature(struct mal_instance *dev,
+		unsigned long feature)
+{
+	return (MAL_FTRS_ALWAYS & feature) ||
+		(MAL_FTRS_POSSIBLE & dev->features & feature);
+}
+
 /* Register MAL devices */
 int mal_init(void);
 void mal_exit(void);

drivers/net/ibm_newemac/phy.c

@@ -38,6 +38,16 @@ static inline void phy_write(struct mii_phy *phy, int reg, int val)
 	phy->mdio_write(phy->dev, phy->address, reg, val);
 }
 
+static inline int gpcs_phy_read(struct mii_phy *phy, int reg)
+{
+	return phy->mdio_read(phy->dev, phy->gpcs_address, reg);
+}
+
+static inline void gpcs_phy_write(struct mii_phy *phy, int reg, int val)
+{
+	phy->mdio_write(phy->dev, phy->gpcs_address, reg, val);
+}
+
 int emac_mii_reset_phy(struct mii_phy *phy)
 {
 	int val;
@@ -62,6 +72,37 @@ int emac_mii_reset_phy(struct mii_phy *phy)
 	return limit <= 0;
 }
 
+int emac_mii_reset_gpcs(struct mii_phy *phy)
+{
+	int val;
+	int limit = 10000;
+
+	val = gpcs_phy_read(phy, MII_BMCR);
+	val &= ~(BMCR_ISOLATE | BMCR_ANENABLE);
+	val |= BMCR_RESET;
+	gpcs_phy_write(phy, MII_BMCR, val);
+
+	udelay(300);
+
+	while (limit--) {
+		val = gpcs_phy_read(phy, MII_BMCR);
+		if (val >= 0 && (val & BMCR_RESET) == 0)
+			break;
+		udelay(10);
+	}
+	if ((val & BMCR_ISOLATE) && limit > 0)
+		gpcs_phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
+
+	if (limit > 0 && phy->mode == PHY_MODE_SGMII) {
+		/* Configure GPCS interface to recommended setting for SGMII */
+		gpcs_phy_write(phy, 0x04, 0x8120); /* AsymPause, FDX */
+		gpcs_phy_write(phy, 0x07, 0x2801); /* msg_pg, toggle */
+		gpcs_phy_write(phy, 0x00, 0x0140); /* 1Gbps, FDX     */
+	}
+
+	return limit <= 0;
+}
+
 static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
 {
 	int ctl, adv;
@@ -332,6 +373,33 @@ static int m88e1111_init(struct mii_phy *phy)
 	return  0;
 }
 
+static int m88e1112_init(struct mii_phy *phy)
+{
+	/*
+	 * Marvell 88E1112 PHY needs to have the SGMII MAC
+	 * interace (page 2) properly configured to
+	 * communicate with the 460EX/GT GPCS interface.
+	 */
+
+	u16 reg_short;
+
+	pr_debug("%s: Marvell 88E1112 Ethernet\n", __func__);
+
+	/* Set access to Page 2 */
+	phy_write(phy, 0x16, 0x0002);
+
+	phy_write(phy, 0x00, 0x0040); /* 1Gbps */
+	reg_short = (u16)(phy_read(phy, 0x1a));
+	reg_short |= 0x8000; /* bypass Auto-Negotiation */
+	phy_write(phy, 0x1a, reg_short);
+	emac_mii_reset_phy(phy); /* reset MAC interface */
+
+	/* Reset access to Page 0 */
+	phy_write(phy, 0x16, 0x0000);
+
+	return  0;
+}
+
 static int et1011c_init(struct mii_phy *phy)
 {
 	u16 reg_short;
@@ -384,11 +452,27 @@ static struct mii_phy_def m88e1111_phy_def = {
 	.ops		= &m88e1111_phy_ops,
 };
 
+static struct mii_phy_ops m88e1112_phy_ops = {
+	.init		= m88e1112_init,
+	.setup_aneg	= genmii_setup_aneg,
+	.setup_forced	= genmii_setup_forced,
+	.poll_link	= genmii_poll_link,
+	.read_link	= genmii_read_link
+};
+
+static struct mii_phy_def m88e1112_phy_def = {
+	.phy_id		= 0x01410C90,
+	.phy_id_mask	= 0x0ffffff0,
+	.name		= "Marvell 88E1112 Ethernet",
+	.ops		= &m88e1112_phy_ops,
+};
+
 static struct mii_phy_def *mii_phy_table[] = {
 	&et1011c_phy_def,
 	&cis8201_phy_def,
 	&bcm5248_phy_def,
 	&m88e1111_phy_def,
+	&m88e1112_phy_def,
 	&genmii_phy_def,
 	NULL
 };

drivers/net/ibm_newemac/phy.h

@@ -57,6 +57,7 @@ struct mii_phy {
 				   or determined automaticaly */
 	int address;		/* PHY address */
 	int mode;		/* PHY mode */
+	int gpcs_address;	/* GPCS PHY address */
 
 	/* 1: autoneg enabled, 0: disabled */
 	int autoneg;
@@ -81,5 +82,6 @@ struct mii_phy {
  */
 int emac_mii_phy_probe(struct mii_phy *phy, int address);
 int emac_mii_reset_phy(struct mii_phy *phy);
+int emac_mii_reset_gpcs(struct mii_phy *phy);
 
 #endif /* __IBM_NEWEMAC_PHY_H */