Merge tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...

Documentation/ABI/stable/sysfs-driver-w1_ds28e04

+What:		/sys/bus/w1/devices/.../pio
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the two PIO's of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100
+
+
+
+What:		/sys/bus/w1/devices/.../eeprom
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the EEPROM memory of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100

Documentation/ABI/testing/dev-kmsg

@@ -58,16 +58,18 @@ Description:	The /dev/kmsg character device node provides userspace access
 
 		The output format consists of a prefix carrying the syslog
 		prefix including priority and facility, the 64 bit message
-		sequence number and the monotonic timestamp in microseconds.
-		The values are separated by a ','. Future extensions might
-		add more comma separated values before the terminating ';'.
-		Unknown values should be gracefully ignored.
+		sequence number and the monotonic timestamp in microseconds,
+		and a flag field. All fields are separated by a ','.
+
+		Future extensions might add more comma separated values before
+		the terminating ';'. Unknown fields and values should be
+		gracefully ignored.
 
 		The human readable text string starts directly after the ';'
 		and is terminated by a '\n'. Untrusted values derived from
 		hardware or other facilities are printed, therefore
-		all non-printable characters in the log message are escaped
-		by "\x00" C-style hex encoding.
+		all non-printable characters and '\' itself in the log message
+		are escaped by "\x00" C-style hex encoding.
 
 		A line starting with ' ', is a continuation line, adding
 		key/value pairs to the log message, which provide the machine
@@ -75,11 +77,11 @@ Description:	The /dev/kmsg character device node provides userspace access
 		userspace.
 
 		Example:
-		7,160,424069;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
+		7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
 		 SUBSYSTEM=acpi
 		 DEVICE=+acpi:PNP0A03:00
-		6,339,5140900;NET: Registered protocol family 10
-		30,340,5690716;udevd[80]: starting version 181
+		6,339,5140900,-;NET: Registered protocol family 10
+		30,340,5690716,-;udevd[80]: starting version 181
 
 		The DEVICE= key uniquely identifies devices the following way:
 		  b12:8        - block dev_t
@@ -87,4 +89,13 @@ Description:	The /dev/kmsg character device node provides userspace access
 		  n8           - netdev ifindex
 		  +sound:card0 - subsystem:devname
 
+		The flags field carries '-' by default. A 'c' indicates a
+		fragment of a line. All following fragments are flagged with
+		'+'. Note, that these hints about continuation lines are not
+		neccessarily correct, and the stream could be interleaved with
+		unrelated messages, but merging the lines in the output
+		usually produces better human readable results. A similar
+		logic is used internally when messages are printed to the
+		console, /proc/kmsg or the syslog() syscall.
+
 Users:		dmesg(1), userspace kernel log consumers

Documentation/stable_kernel_rules.txt

-Everything you ever wanted to know about Linux 2.6 -stable releases.
+Everything you ever wanted to know about Linux -stable releases.
 
 Rules on what kind of patches are accepted, and which ones are not, into the
 "-stable" tree:
@@ -42,10 +42,10 @@ Procedure for submitting patches to the -stable tree:
    cherry-picked than this can be specified in the following format in
    the sign-off area:
 
-     Cc: <stable@vger.kernel.org> # .32.x: a1f84a3: sched: Check for idle
-     Cc: <stable@vger.kernel.org> # .32.x: 1b9508f: sched: Rate-limit newidle
-     Cc: <stable@vger.kernel.org> # .32.x: fd21073: sched: Fix affinity logic
-     Cc: <stable@vger.kernel.org> # .32.x
+     Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle
+     Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle
+     Cc: <stable@vger.kernel.org> # 3.3.x: fd21073: sched: Fix affinity logic
+     Cc: <stable@vger.kernel.org> # 3.3.x
     Signed-off-by: Ingo Molnar <mingo@elte.hu>
 
    The tag sequence has the meaning of:
@@ -79,6 +79,15 @@ Review cycle:
    security kernel team, and not go through the normal review cycle.
    Contact the kernel security team for more details on this procedure.
 
+Trees:
+
+ - The queues of patches, for both completed versions and in progress
+   versions can be found at:
+	http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
+ - The finalized and tagged releases of all stable kernels can be found
+   in separate branches per version at:
+	http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git
+
 
 Review committee:
 

Documentation/w1/slaves/w1_ds28e04

+Kernel driver w1_ds28e04
+========================
+
+Supported chips:
+  * Maxim DS28E04-100 4096-Bit Addressable 1-Wire EEPROM with PIO
+
+supported family codes:
+	W1_FAMILY_DS28E04	0x1C
+
+Author: Markus Franke, <franke.m@sebakmt.com> <franm@hrz.tu-chemnitz.de>
+
+Description
+-----------
+
+Support is provided through the sysfs files "eeprom" and "pio". CRC checking
+during memory accesses can optionally be enabled/disabled via the device
+attribute "crccheck". The strong pull-up can optionally be enabled/disabled
+via the module parameter "w1_strong_pullup".
+
+Memory Access
+
+	A read operation on the "eeprom" file reads the given amount of bytes
+	from the EEPROM of the DS28E04.
+
+	A write operation on the "eeprom" file writes the given byte sequence
+	to the EEPROM of the DS28E04. If CRC checking mode is enabled only
+	fully alligned blocks of 32 bytes with valid CRC16 values (in bytes 30
+	and 31) are allowed to be written.
+
+PIO Access
+
+	The 2 PIOs of the DS28E04-100 are accessible via the "pio" sysfs file.
+
+	The current status of the PIO's is returned as an 8 bit value. Bit 0/1
+	represent the state of PIO_0/PIO_1. Bits 2..7 do not care. The PIO's are
+	driven low-active, i.e. the driver delivers/expects low-active values.

MAINTAINERS

@@ -2728,6 +2728,14 @@ M:	Mimi Zohar <zohar@us.ibm.com>
 S:	Supported
 F:	security/integrity/evm/
 
+EXTERNAL CONNECTOR SUBSYSTEM (EXTCON)
+M:	MyungJoo Ham <myungjoo.ham@samsung.com>
+M:	Chanwoo Choi <cw00.choi@samsung.com>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	drivers/extcon/
+F:	Documentation/extcon/
+
 EXYNOS DP DRIVER
 M:	Jingoo Han <jg1.han@samsung.com>
 L:	linux-fbdev@vger.kernel.org

drivers/base/bus.c

@@ -743,7 +743,6 @@ int bus_add_driver(struct device_driver *drv)
 		}
 	}
 
-	kobject_uevent(&priv->kobj, KOBJ_ADD);
 	return 0;
 
 out_unregister:

drivers/base/core.c

@@ -85,14 +85,13 @@ const char *dev_driver_string(const struct device *dev)
 }
 EXPORT_SYMBOL(dev_driver_string);
 
-#define to_dev(obj) container_of(obj, struct device, kobj)
 #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
 
 static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
 			     char *buf)
 {
 	struct device_attribute *dev_attr = to_dev_attr(attr);
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	ssize_t ret = -EIO;
 
 	if (dev_attr->show)
@@ -108,7 +107,7 @@ static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr,
 			      const char *buf, size_t count)
 {
 	struct device_attribute *dev_attr = to_dev_attr(attr);
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	ssize_t ret = -EIO;
 
 	if (dev_attr->store)
@@ -182,7 +181,7 @@ EXPORT_SYMBOL_GPL(device_show_int);
  */
 static void device_release(struct kobject *kobj)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct device_private *p = dev->p;
 
 	if (dev->release)
@@ -200,7 +199,7 @@ static void device_release(struct kobject *kobj)
 
 static const void *device_namespace(struct kobject *kobj)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	const void *ns = NULL;
 
 	if (dev->class && dev->class->ns_type)
@@ -221,7 +220,7 @@ static int dev_uevent_filter(struct kset *kset, struct kobject *kobj)
 	struct kobj_type *ktype = get_ktype(kobj);
 
 	if (ktype == &device_ktype) {
-		struct device *dev = to_dev(kobj);
+		struct device *dev = kobj_to_dev(kobj);
 		if (dev->bus)
 			return 1;
 		if (dev->class)
@@ -232,7 +231,7 @@ static int dev_uevent_filter(struct kset *kset, struct kobject *kobj)
 
 static const char *dev_uevent_name(struct kset *kset, struct kobject *kobj)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 
 	if (dev->bus)
 		return dev->bus->name;
@@ -244,7 +243,7 @@ static const char *dev_uevent_name(struct kset *kset, struct kobject *kobj)
 static int dev_uevent(struct kset *kset, struct kobject *kobj,
 		      struct kobj_uevent_env *env)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	int retval = 0;
 
 	/* add device node properties if present */
@@ -1132,7 +1131,7 @@ int device_register(struct device *dev)
  */
 struct device *get_device(struct device *dev)
 {
-	return dev ? to_dev(kobject_get(&dev->kobj)) : NULL;
+	return dev ? kobj_to_dev(kobject_get(&dev->kobj)) : NULL;
 }
 
 /**
@@ -1754,25 +1753,25 @@ int device_move(struct device *dev, struct device *new_parent,
 		set_dev_node(dev, dev_to_node(new_parent));
 	}
 
-	if (!dev->class)
-		goto out_put;
-	error = device_move_class_links(dev, old_parent, new_parent);
-	if (error) {
-		/* We ignore errors on cleanup since we're hosed anyway... */
-		device_move_class_links(dev, new_parent, old_parent);
-		if (!kobject_move(&dev->kobj, &old_parent->kobj)) {
-			if (new_parent)
-				klist_remove(&dev->p->knode_parent);
-			dev->parent = old_parent;
-			if (old_parent) {
-				klist_add_tail(&dev->p->knode_parent,
-					       &old_parent->p->klist_children);
-				set_dev_node(dev, dev_to_node(old_parent));
+	if (dev->class) {
+		error = device_move_class_links(dev, old_parent, new_parent);
+		if (error) {
+			/* We ignore errors on cleanup since we're hosed anyway... */
+			device_move_class_links(dev, new_parent, old_parent);
+			if (!kobject_move(&dev->kobj, &old_parent->kobj)) {
+				if (new_parent)
+					klist_remove(&dev->p->knode_parent);
+				dev->parent = old_parent;
+				if (old_parent) {
+					klist_add_tail(&dev->p->knode_parent,
+						       &old_parent->p->klist_children);
+					set_dev_node(dev, dev_to_node(old_parent));
+				}
 			}
+			cleanup_glue_dir(dev, new_parent_kobj);
+			put_device(new_parent);
+			goto out;
 		}
-		cleanup_glue_dir(dev, new_parent_kobj);
-		put_device(new_parent);
-		goto out;
 	}
 	switch (dpm_order) {
 	case DPM_ORDER_NONE:
@@ -1787,7 +1786,7 @@ int device_move(struct device *dev, struct device *new_parent,
 		device_pm_move_last(dev);
 		break;
 	}
-out_put:
+
 	put_device(old_parent);
 out:
 	device_pm_unlock();
@@ -1812,6 +1811,13 @@ void device_shutdown(void)
 	while (!list_empty(&devices_kset->list)) {
 		dev = list_entry(devices_kset->list.prev, struct device,
 				kobj.entry);
+
+		/*
+		 * hold reference count of device's parent to
+		 * prevent it from being freed because parent's
+		 * lock is to be held
+		 */
+		get_device(dev->parent);
 		get_device(dev);
 		/*
 		 * Make sure the device is off the kset list, in the
@@ -1820,6 +1826,11 @@ void device_shutdown(void)
 		list_del_init(&dev->kobj.entry);
 		spin_unlock(&devices_kset->list_lock);
 
+		/* hold lock to avoid race with probe/release */
+		if (dev->parent)
+			device_lock(dev->parent);
+		device_lock(dev);
+
 		/* Don't allow any more runtime suspends */
 		pm_runtime_get_noresume(dev);
 		pm_runtime_barrier(dev);
@@ -1831,7 +1842,13 @@ void device_shutdown(void)
 			dev_dbg(dev, "shutdown\n");
 			dev->driver->shutdown(dev);
 		}
+
+		device_unlock(dev);
+		if (dev->parent)
+			device_unlock(dev->parent);
+
 		put_device(dev);
+		put_device(dev->parent);
 
 		spin_lock(&devices_kset->list_lock);
 	}

drivers/base/dd.c

@@ -85,8 +85,20 @@ static void deferred_probe_work_func(struct work_struct *work)
 		 * manipulate the deferred list
 		 */
 		mutex_unlock(&deferred_probe_mutex);
+
+		/*
+		 * Force the device to the end of the dpm_list since
+		 * the PM code assumes that the order we add things to
+		 * the list is a good order for suspend but deferred
+		 * probe makes that very unsafe.
+		 */
+		device_pm_lock();
+		device_pm_move_last(dev);
+		device_pm_unlock();
+
 		dev_dbg(dev, "Retrying from deferred list\n");
 		bus_probe_device(dev);
+
 		mutex_lock(&deferred_probe_mutex);
 
 		put_device(dev);
@@ -283,6 +295,7 @@ static int really_probe(struct device *dev, struct device_driver *drv)
 	devres_release_all(dev);
 	driver_sysfs_remove(dev);
 	dev->driver = NULL;
+	dev_set_drvdata(dev, NULL);
 
 	if (ret == -EPROBE_DEFER) {
 		/* Driver requested deferred probing */
@@ -356,10 +369,9 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)
 	pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
 		 drv->bus->name, __func__, dev_name(dev), drv->name);
 
-	pm_runtime_get_noresume(dev);
 	pm_runtime_barrier(dev);
 	ret = really_probe(dev, drv);
-	pm_runtime_put_sync(dev);
+	pm_runtime_idle(dev);
 
 	return ret;
 }
@@ -406,9 +418,8 @@ int device_attach(struct device *dev)
 			ret = 0;
 		}
 	} else {
-		pm_runtime_get_noresume(dev);
 		ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
-		pm_runtime_put_sync(dev);
+		pm_runtime_idle(dev);
 	}
 out_unlock:
 	device_unlock(dev);
@@ -487,6 +498,7 @@ static void __device_release_driver(struct device *dev)
 			drv->remove(dev);
 		devres_release_all(dev);
 		dev->driver = NULL;
+		dev_set_drvdata(dev, NULL);
 		klist_remove(&dev->p->knode_driver);
 		if (dev->bus)
 			blocking_notifier_call_chain(&dev->bus->p->bus_notifier,

drivers/base/dma-buf.c

@@ -493,6 +493,7 @@ EXPORT_SYMBOL_GPL(dma_buf_vmap);
 /**
  * dma_buf_vunmap - Unmap a vmap obtained by dma_buf_vmap.
  * @dmabuf:	[in]	buffer to vunmap
+ * @vaddr:	[in]	vmap to vunmap
  */
 void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr)
 {

drivers/base/dma-coherent.c

@@ -186,6 +186,7 @@ EXPORT_SYMBOL(dma_release_from_coherent);
  * @vma:	vm_area for the userspace memory
  * @vaddr:	cpu address returned by dma_alloc_from_coherent
  * @size:	size of the memory buffer allocated by dma_alloc_from_coherent
+ * @ret:	result from remap_pfn_range()
  *
  * This checks whether the memory was allocated from the per-device
  * coherent memory pool and if so, maps that memory to the provided vma.

drivers/base/driver.c

@@ -185,8 +185,12 @@ int driver_register(struct device_driver *drv)
 	if (ret)
 		return ret;
 	ret = driver_add_groups(drv, drv->groups);
-	if (ret)
+	if (ret) {
 		bus_remove_driver(drv);
+		return ret;
+	}
+	kobject_uevent(&drv->p->kobj, KOBJ_ADD);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(driver_register);

drivers/base/firmware_class.c

@@ -22,8 +22,6 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 
-#define to_dev(obj) container_of(obj, struct device, kobj)
-
 MODULE_AUTHOR("Manuel Estrada Sainz");
 MODULE_DESCRIPTION("Multi purpose firmware loading support");
 MODULE_LICENSE("GPL");
@@ -290,7 +288,7 @@ static ssize_t firmware_data_read(struct file *filp, struct kobject *kobj,
 				  struct bin_attribute *bin_attr,
 				  char *buffer, loff_t offset, size_t count)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct firmware_priv *fw_priv = to_firmware_priv(dev);
 	struct firmware *fw;
 	ssize_t ret_count;
@@ -384,7 +382,7 @@ static ssize_t firmware_data_write(struct file *filp, struct kobject *kobj,
 				   struct bin_attribute *bin_attr,
 				   char *buffer, loff_t offset, size_t count)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct firmware_priv *fw_priv = to_firmware_priv(dev);
 	struct firmware *fw;
 	ssize_t retval;

drivers/extcon/Kconfig

@@ -21,6 +21,16 @@ config EXTCON_GPIO
 	  Say Y here to enable GPIO based extcon support. Note that GPIO
 	  extcon supports single state per extcon instance.
 
+config EXTCON_MAX77693
+	tristate "MAX77693 EXTCON Support"
+	depends on MFD_MAX77693
+	select IRQ_DOMAIN
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the MUIC device of
+	  Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory
+	  detector and switch.
+
 config EXTCON_MAX8997
 	tristate "MAX8997 EXTCON Support"
 	depends on MFD_MAX8997
@@ -29,4 +39,12 @@ config EXTCON_MAX8997
 	  Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
 	  detector and switch.
 
+config EXTCON_ARIZONA
+	tristate "Wolfson Arizona EXTCON support"
+	depends on MFD_ARIZONA
+	help
+	  Say Y here to enable support for external accessory detection
+	  with Wolfson Arizona devices. These are audio CODECs with
+	  advanced audio accessory detection support.
+
 endif # MULTISTATE_SWITCH

drivers/extcon/Makefile

@@ -4,4 +4,6 @@
 
 obj-$(CONFIG_EXTCON)		+= extcon_class.o
 obj-$(CONFIG_EXTCON_GPIO)	+= extcon_gpio.o
+obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
 obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
+obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o

drivers/extcon/extcon_class.c

@@ -65,7 +65,7 @@ const char *extcon_cable_name[] = {
 	NULL,
 };
 
-struct class *extcon_class;
+static struct class *extcon_class;
 #if defined(CONFIG_ANDROID)
 static struct class_compat *switch_class;
 #endif /* CONFIG_ANDROID */

drivers/extcon/extcon_gpio.c

@@ -105,25 +105,25 @@ static int __devinit gpio_extcon_probe(struct platform_device *pdev)
 
 	ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
 	if (ret < 0)
-		goto err_extcon_dev_register;
+		return ret;
 
 	ret = gpio_request_one(extcon_data->gpio, GPIOF_DIR_IN, pdev->name);
 	if (ret < 0)
-		goto err_request_gpio;
+		goto err;
 
 	INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
 
 	extcon_data->irq = gpio_to_irq(extcon_data->gpio);
 	if (extcon_data->irq < 0) {
 		ret = extcon_data->irq;
-		goto err_detect_irq_num_failed;
+		goto err;
 	}
 
 	ret = request_any_context_irq(extcon_data->irq, gpio_irq_handler,
 				      pdata->irq_flags, pdev->name,
 				      extcon_data);
 	if (ret < 0)
-		goto err_request_irq;
+		goto err;
 
 	platform_set_drvdata(pdev, extcon_data);
 	/* Perform initial detection */
@@ -131,13 +131,8 @@ static int __devinit gpio_extcon_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_request_irq:
-err_detect_irq_num_failed:
-	gpio_free(extcon_data->gpio);
-err_request_gpio:
+err:
 	extcon_dev_unregister(&extcon_data->edev);
-err_extcon_dev_register:
-	devm_kfree(&pdev->dev, extcon_data);
 
 	return ret;
 }
@@ -148,9 +143,7 @@ static int __devexit gpio_extcon_remove(struct platform_device *pdev)
 
 	cancel_delayed_work_sync(&extcon_data->work);
 	free_irq(extcon_data->irq, extcon_data);
-	gpio_free(extcon_data->gpio);
 	extcon_dev_unregister(&extcon_data->edev);
-	devm_kfree(&pdev->dev, extcon_data);
 
 	return 0;
 }

drivers/hv/hyperv_vmbus.h

@@ -411,7 +411,7 @@ enum {
 #define HV_PRESENT_BIT			0x80000000
 
 #define HV_LINUX_GUEST_ID_LO		0x00000000
-#define HV_LINUX_GUEST_ID_HI		0xB16B00B5
+#define HV_LINUX_GUEST_ID_HI		2976579765
 #define HV_LINUX_GUEST_ID		(((u64)HV_LINUX_GUEST_ID_HI << 32) | \
 					   HV_LINUX_GUEST_ID_LO)
 

drivers/power/ds2780_battery.c

@@ -39,7 +39,6 @@ struct ds2780_device_info {
 	struct device *dev;
 	struct power_supply bat;
 	struct device *w1_dev;
-	struct task_struct *mutex_holder;
 };
 
 enum current_types {
@@ -64,10 +63,7 @@ static inline struct power_supply *to_power_supply(struct device *dev)
 static inline int ds2780_battery_io(struct ds2780_device_info *dev_info,
 	char *buf, int addr, size_t count, int io)
 {
-	if (dev_info->mutex_holder == current)
-		return w1_ds2780_io_nolock(dev_info->w1_dev, buf, addr, count, io);
-	else
-		return w1_ds2780_io(dev_info->w1_dev, buf, addr, count, io);
+	return w1_ds2780_io(dev_info->w1_dev, buf, addr, count, io);
 }
 
 static inline int ds2780_read8(struct ds2780_device_info *dev_info, u8 *val,
@@ -779,7 +775,6 @@ static int __devinit ds2780_battery_probe(struct platform_device *pdev)
 	dev_info->bat.properties	= ds2780_battery_props;
 	dev_info->bat.num_properties	= ARRAY_SIZE(ds2780_battery_props);
 	dev_info->bat.get_property	= ds2780_battery_get_property;
-	dev_info->mutex_holder		= current;
 
 	ret = power_supply_register(&pdev->dev, &dev_info->bat);
 	if (ret) {
@@ -809,8 +804,6 @@ static int __devinit ds2780_battery_probe(struct platform_device *pdev)
 		goto fail_remove_bin_file;
 	}
 
-	dev_info->mutex_holder = NULL;
-
 	return 0;
 
 fail_remove_bin_file:
@@ -830,8 +823,6 @@ static int __devexit ds2780_battery_remove(struct platform_device *pdev)
 {
 	struct ds2780_device_info *dev_info = platform_get_drvdata(pdev);
 
-	dev_info->mutex_holder = current;
-
 	/* remove attributes */
 	sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
 

drivers/power/ds2781_battery.c

@@ -37,7 +37,6 @@ struct ds2781_device_info {
 	struct device *dev;
 	struct power_supply bat;
 	struct device *w1_dev;
-	struct task_struct *mutex_holder;
 };
 
 enum current_types {
@@ -62,11 +61,7 @@ static inline struct power_supply *to_power_supply(struct device *dev)
 static inline int ds2781_battery_io(struct ds2781_device_info *dev_info,
 	char *buf, int addr, size_t count, int io)
 {
-	if (dev_info->mutex_holder == current)
-		return w1_ds2781_io_nolock(dev_info->w1_dev, buf, addr,
-				count, io);
-	else
-		return w1_ds2781_io(dev_info->w1_dev, buf, addr, count, io);
+	return w1_ds2781_io(dev_info->w1_dev, buf, addr, count, io);
 }
 
 int w1_ds2781_read(struct ds2781_device_info *dev_info, char *buf,
@@ -775,7 +770,6 @@ static int __devinit ds2781_battery_probe(struct platform_device *pdev)
 	dev_info->bat.properties	= ds2781_battery_props;
 	dev_info->bat.num_properties	= ARRAY_SIZE(ds2781_battery_props);
 	dev_info->bat.get_property	= ds2781_battery_get_property;
-	dev_info->mutex_holder		= current;
 
 	ret = power_supply_register(&pdev->dev, &dev_info->bat);
 	if (ret) {
@@ -805,8 +799,6 @@ static int __devinit ds2781_battery_probe(struct platform_device *pdev)
 		goto fail_remove_bin_file;
 	}
 
-	dev_info->mutex_holder = NULL;
-
 	return 0;
 
 fail_remove_bin_file:
@@ -826,8 +818,6 @@ static int __devexit ds2781_battery_remove(struct platform_device *pdev)
 {
 	struct ds2781_device_info *dev_info = platform_get_drvdata(pdev);
 
-	dev_info->mutex_holder = current;
-
 	/* remove attributes */
 	sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
 

drivers/w1/masters/ds1wm.c

@@ -334,7 +334,9 @@ static void ds1wm_search(void *data, struct w1_master *master_dev,
 			return;
 		}
 
+		mutex_lock(&master_dev->bus_mutex);
 		if (ds1wm_reset(ds1wm_data)) {
+			mutex_unlock(&master_dev->bus_mutex);
 			dev_dbg(&ds1wm_data->pdev->dev,
 				"pass: %d reset error (or no slaves)\n", pass);
 			break;
@@ -387,6 +389,7 @@ static void ds1wm_search(void *data, struct w1_master *master_dev,
 
 		}
 		if (ds1wm_data->read_error) {
+			mutex_unlock(&master_dev->bus_mutex);
 			dev_err(&ds1wm_data->pdev->dev,
 				"pass: %d read error, retrying\n", pass);
 			break;
@@ -400,6 +403,7 @@ static void ds1wm_search(void *data, struct w1_master *master_dev,
 		dev_dbg(&ds1wm_data->pdev->dev,
 			"pass: %d resetting bus\n", pass);
 		ds1wm_reset(ds1wm_data);
+		mutex_unlock(&master_dev->bus_mutex);
 		if ((r_prime & ((u64)1 << 63)) && (d & ((u64)1 << 63))) {
 			dev_err(&ds1wm_data->pdev->dev,
 				"pass: %d bus error, retrying\n", pass);

drivers/w1/masters/omap_hdq.c

@@ -178,6 +178,7 @@ static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
 		hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
 	if (ret == 0) {
 		dev_dbg(hdq_data->dev, "TX wait elapsed\n");
+		ret = -ETIMEDOUT;
 		goto out;
 	}
 
@@ -185,7 +186,7 @@ static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
 	/* check irqstatus */
 	if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) {
 		dev_dbg(hdq_data->dev, "timeout waiting for"
-			"TXCOMPLETE/RXCOMPLETE, %x", *status);
+			" TXCOMPLETE/RXCOMPLETE, %x", *status);
 		ret = -ETIMEDOUT;
 		goto out;
 	}
@@ -196,7 +197,7 @@ static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
 			OMAP_HDQ_FLAG_CLEAR, &tmp_status);
 	if (ret) {
 		dev_dbg(hdq_data->dev, "timeout waiting GO bit"
-			"return to zero, %x", tmp_status);
+			" return to zero, %x", tmp_status);
 	}
 
 out:
@@ -339,7 +340,7 @@ static int omap_hdq_break(struct hdq_data *hdq_data)
 			&tmp_status);
 	if (ret)
 		dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits"
-			"return to zero, %x", tmp_status);
+			" return to zero, %x", tmp_status);
 
 out:
 	mutex_unlock(&hdq_data->hdq_mutex);
@@ -351,7 +352,6 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 {
 	int ret = 0;
 	u8 status;
-	unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
 
 	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
 	if (ret < 0) {
@@ -369,22 +369,20 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 			OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO,
 			OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
 		/*
-		 * The RX comes immediately after TX. It
-		 * triggers another interrupt before we
-		 * sleep. So we have to wait for RXCOMPLETE bit.
+		 * The RX comes immediately after TX.
 		 */
-		while (!(hdq_data->hdq_irqstatus
-			& OMAP_HDQ_INT_STATUS_RXCOMPLETE)
-			&& time_before(jiffies, timeout)) {
-			schedule_timeout_uninterruptible(1);
-		}
+		wait_event_timeout(hdq_wait_queue,
+				   (hdq_data->hdq_irqstatus
+				    & OMAP_HDQ_INT_STATUS_RXCOMPLETE),
+				   OMAP_HDQ_TIMEOUT);
+
 		hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0,
 			OMAP_HDQ_CTRL_STATUS_DIR);
 		status = hdq_data->hdq_irqstatus;
 		/* check irqstatus */
 		if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
 			dev_dbg(hdq_data->dev, "timeout waiting for"
-				"RXCOMPLETE, %x", status);
+				" RXCOMPLETE, %x", status);
 			ret = -ETIMEDOUT;
 			goto out;
 		}
@@ -394,7 +392,7 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 out:
 	mutex_unlock(&hdq_data->hdq_mutex);
 rtn:
-	return 0;
+	return ret;
 
 }
 
@@ -456,7 +454,7 @@ static int omap_hdq_put(struct hdq_data *hdq_data)
 
 	if (0 == hdq_data->hdq_usecount) {
 		dev_dbg(hdq_data->dev, "attempt to decrement use count"
-			"when it is zero");
+			" when it is zero");
 		ret = -EINVAL;
 	} else {
 		hdq_data->hdq_usecount--;
@@ -524,7 +522,7 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
 	mutex_unlock(&hdq_data->hdq_mutex);
 
 	ret = hdq_write_byte(hdq_data, byte, &status);
-	if (ret == 0) {
+	if (ret < 0) {
 		dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status);
 		return;
 	}

drivers/w1/slaves/Kconfig

@@ -94,6 +94,19 @@ config W1_SLAVE_DS2781
 
 	  If you are unsure, say N.
 
+config W1_SLAVE_DS28E04
+	tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)"
+	depends on W1
+	select CRC16
+	help
+	  If you enable this you will have the DS28E04-100
+	  chip support.
+
+	  Say Y here if you want to use a 1-wire
+	  4kb EEPROM with PIO family device (DS28E04).
+
+	  If you are unsure, say N.
+
 config W1_SLAVE_BQ27000
 	tristate "BQ27000 slave support"
 	depends on W1

drivers/w1/slaves/Makefile

@@ -12,3 +12,4 @@ obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
 obj-$(CONFIG_W1_SLAVE_BQ27000)	+= w1_bq27000.o
+obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o

drivers/w1/slaves/w1_bq27000.c

@@ -31,10 +31,10 @@ static int w1_bq27000_read(struct device *dev, unsigned int reg)
 	u8 val;
 	struct w1_slave *sl = container_of(dev->parent, struct w1_slave, dev);
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 	w1_write_8(sl->master, HDQ_CMD_READ | reg);
 	val = w1_read_8(sl->master);
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return val;
 }

drivers/w1/slaves/w1_ds2408.c

@@ -52,11 +52,11 @@ static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf)
 	if (!buf)
 		return -EINVAL;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 	dev_dbg(&sl->dev, "mutex locked");
 
 	if (w1_reset_select_slave(sl)) {
-		mutex_unlock(&sl->master->mutex);
+		mutex_unlock(&sl->master->bus_mutex);
 		return -EIO;
 	}
 
@@ -66,7 +66,7 @@ static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf)
 	w1_write_block(sl->master, wrbuf, 3);
 	*buf = w1_read_8(sl->master);
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	dev_dbg(&sl->dev, "mutex unlocked");
 	return 1;
 }
@@ -165,7 +165,7 @@ static ssize_t w1_f29_write_output(
 		return -EFAULT;
 
 	dev_dbg(&sl->dev, "locking mutex for write_output");
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 	dev_dbg(&sl->dev, "mutex locked");
 
 	if (w1_reset_select_slave(sl))
@@ -200,14 +200,14 @@ static ssize_t w1_f29_write_output(
 		/* read the result of the READ_PIO_REGS command */
 		if (w1_read_8(sl->master) == *buf) {
 			/* success! */
-			mutex_unlock(&sl->master->mutex);
+			mutex_unlock(&sl->master->bus_mutex);
 			dev_dbg(&sl->dev,
 				"mutex unlocked, retries:%d", retries);
 			return 1;
 		}
 	}
 error:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	dev_dbg(&sl->dev, "mutex unlocked in error, retries:%d", retries);
 
 	return -EIO;
@@ -228,7 +228,7 @@ static ssize_t w1_f29_write_activity(
 	if (count != 1 || off != 0)
 		return -EFAULT;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (w1_reset_select_slave(sl))
 		goto error;
@@ -236,7 +236,7 @@ static ssize_t w1_f29_write_activity(
 	while (retries--) {
 		w1_write_8(sl->master, W1_F29_FUNC_RESET_ACTIVITY_LATCHES);
 		if (w1_read_8(sl->master) == W1_F29_SUCCESS_CONFIRM_BYTE) {
-			mutex_unlock(&sl->master->mutex);
+			mutex_unlock(&sl->master->bus_mutex);
 			return 1;
 		}
 		if (w1_reset_resume_command(sl->master))
@@ -244,7 +244,7 @@ static ssize_t w1_f29_write_activity(
 	}
 
 error:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	return -EIO;
 }
 
@@ -263,7 +263,7 @@ static ssize_t w1_f29_write_status_control(
 	if (count != 1 || off != 0)
 		return -EFAULT;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (w1_reset_select_slave(sl))
 		goto error;
@@ -285,12 +285,12 @@ static ssize_t w1_f29_write_status_control(
 		w1_write_block(sl->master, w1_buf, 3);
 		if (w1_read_8(sl->master) == *buf) {
 			/* success! */
-			mutex_unlock(&sl->master->mutex);
+			mutex_unlock(&sl->master->bus_mutex);
 			return 1;
 		}
 	}
 error:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return -EIO;
 }

drivers/w1/slaves/w1_ds2423.c

@@ -66,7 +66,7 @@ static ssize_t w1_counter_read(struct device *device,
 	wrbuf[0]	= 0xA5;
 	wrbuf[1]	= rom_addr & 0xFF;
 	wrbuf[2]	= rom_addr >> 8;
-	mutex_lock(&dev->mutex);
+	mutex_lock(&dev->bus_mutex);
 	if (!w1_reset_select_slave(sl)) {
 		w1_write_block(dev, wrbuf, 3);
 		read_byte_count = 0;
@@ -124,7 +124,7 @@ static ssize_t w1_counter_read(struct device *device,
 	} else {
 		c -= snprintf(out_buf + PAGE_SIZE - c, c, "Connection error");
 	}
-	mutex_unlock(&dev->mutex);
+	mutex_unlock(&dev->bus_mutex);
 	return PAGE_SIZE - c;
 }
 

drivers/w1/slaves/w1_ds2431.c

@@ -107,7 +107,7 @@ static ssize_t w1_f2d_read_bin(struct file *filp, struct kobject *kobj,
 	if (count == 0)
 		return 0;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	/* read directly from the EEPROM in chunks of W1_F2D_READ_MAXLEN */
 	while (todo > 0) {
@@ -126,7 +126,7 @@ static ssize_t w1_f2d_read_bin(struct file *filp, struct kobject *kobj,
 		off += W1_F2D_READ_MAXLEN;
 	}
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return count;
 }
@@ -214,7 +214,7 @@ static ssize_t w1_f2d_write_bin(struct file *filp, struct kobject *kobj,
 	if (count == 0)
 		return 0;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	/* Can only write data in blocks of the size of the scratchpad */
 	addr = off;
@@ -259,7 +259,7 @@ static ssize_t w1_f2d_write_bin(struct file *filp, struct kobject *kobj,
 	}
 
 out_up:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return count;
 }

drivers/w1/slaves/w1_ds2433.c

@@ -107,7 +107,7 @@ static ssize_t w1_f23_read_bin(struct file *filp, struct kobject *kobj,
 	if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
 		return 0;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 #ifdef CONFIG_W1_SLAVE_DS2433_CRC
 
@@ -138,7 +138,7 @@ static ssize_t w1_f23_read_bin(struct file *filp, struct kobject *kobj,
 #endif	/* CONFIG_W1_SLAVE_DS2433_CRC */
 
 out_up:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return count;
 }
@@ -233,7 +233,7 @@ static ssize_t w1_f23_write_bin(struct file *filp, struct kobject *kobj,
 	}
 #endif	/* CONFIG_W1_SLAVE_DS2433_CRC */
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	/* Can only write data to one page at a time */
 	idx = 0;
@@ -251,7 +251,7 @@ static ssize_t w1_f23_write_bin(struct file *filp, struct kobject *kobj,
 	}
 
 out_up:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return count;
 }

drivers/w1/slaves/w1_ds2760.c

@@ -31,7 +31,7 @@ static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
 	if (!dev)
 		return 0;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (addr > DS2760_DATA_SIZE || addr < 0) {
 		count = 0;
@@ -54,7 +54,7 @@ static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
 	}
 
 out:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return count;
 }
@@ -76,14 +76,14 @@ static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
 	if (!dev)
 		return -EINVAL;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (w1_reset_select_slave(sl) == 0) {
 		w1_write_8(sl->master, cmd);
 		w1_write_8(sl->master, addr);
 	}
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	return 0;
 }
 

drivers/w1/slaves/w1_ds2780.c

@@ -60,30 +60,16 @@ int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
 	if (!dev)
 		return -ENODEV;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	ret = w1_ds2780_do_io(dev, buf, addr, count, io);
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return ret;
 }
 EXPORT_SYMBOL(w1_ds2780_io);
 
-int w1_ds2780_io_nolock(struct device *dev, char *buf, int addr, size_t count,
-			int io)
-{
-	int ret;
-
-	if (!dev)
-		return -ENODEV;
-
-	ret = w1_ds2780_do_io(dev, buf, addr, count, io);
-
-	return ret;
-}
-EXPORT_SYMBOL(w1_ds2780_io_nolock);
-
 int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd)
 {
 	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
@@ -91,14 +77,14 @@ int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd)
 	if (!dev)
 		return -EINVAL;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (w1_reset_select_slave(sl) == 0) {
 		w1_write_8(sl->master, cmd);
 		w1_write_8(sl->master, addr);
 	}
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	return 0;
 }
 EXPORT_SYMBOL(w1_ds2780_eeprom_cmd);

drivers/w1/slaves/w1_ds2780.h

@@ -124,8 +124,6 @@
 
 extern int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
 			int io);
-extern int w1_ds2780_io_nolock(struct device *dev, char *buf, int addr,
-			size_t count, int io);
 extern int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd);
 
 #endif /* !_W1_DS2780_H */

drivers/w1/slaves/w1_ds2781.c

@@ -58,30 +58,16 @@ int w1_ds2781_io(struct device *dev, char *buf, int addr, size_t count,
 	if (!dev)
 		return -ENODEV;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	ret = w1_ds2781_do_io(dev, buf, addr, count, io);
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return ret;
 }
 EXPORT_SYMBOL(w1_ds2781_io);
 
-int w1_ds2781_io_nolock(struct device *dev, char *buf, int addr, size_t count,
-			int io)
-{
-	int ret;
-
-	if (!dev)
-		return -ENODEV;
-
-	ret = w1_ds2781_do_io(dev, buf, addr, count, io);
-
-	return ret;
-}
-EXPORT_SYMBOL(w1_ds2781_io_nolock);
-
 int w1_ds2781_eeprom_cmd(struct device *dev, int addr, int cmd)
 {
 	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
@@ -89,14 +75,14 @@ int w1_ds2781_eeprom_cmd(struct device *dev, int addr, int cmd)
 	if (!dev)
 		return -EINVAL;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (w1_reset_select_slave(sl) == 0) {
 		w1_write_8(sl->master, cmd);
 		w1_write_8(sl->master, addr);
 	}
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	return 0;
 }
 EXPORT_SYMBOL(w1_ds2781_eeprom_cmd);

drivers/w1/slaves/w1_ds2781.h

@@ -129,8 +129,6 @@
 
 extern int w1_ds2781_io(struct device *dev, char *buf, int addr, size_t count,
 			int io);
-extern int w1_ds2781_io_nolock(struct device *dev, char *buf, int addr,
-			size_t count, int io);
 extern int w1_ds2781_eeprom_cmd(struct device *dev, int addr, int cmd);
 
 #endif /* !_W1_DS2781_H */

drivers/w1/slaves/w1_therm.c

@@ -179,7 +179,7 @@ static ssize_t w1_therm_read(struct device *device,
 	int i, max_trying = 10;
 	ssize_t c = PAGE_SIZE;
 
-	i = mutex_lock_interruptible(&dev->mutex);
+	i = mutex_lock_interruptible(&dev->bus_mutex);
 	if (i != 0)
 		return i;
 
@@ -207,19 +207,19 @@ static ssize_t w1_therm_read(struct device *device,
 			w1_write_8(dev, W1_CONVERT_TEMP);
 
 			if (external_power) {
-				mutex_unlock(&dev->mutex);
+				mutex_unlock(&dev->bus_mutex);
 
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0)
 					return -EINTR;
 
-				i = mutex_lock_interruptible(&dev->mutex);
+				i = mutex_lock_interruptible(&dev->bus_mutex);
 				if (i != 0)
 					return i;
 			} else if (!w1_strong_pullup) {
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0) {
-					mutex_unlock(&dev->mutex);
+					mutex_unlock(&dev->bus_mutex);
 					return -EINTR;
 				}
 			}
@@ -258,7 +258,7 @@ static ssize_t w1_therm_read(struct device *device,
 
 	c -= snprintf(buf + PAGE_SIZE - c, c, "t=%d\n",
 		w1_convert_temp(rom, sl->family->fid));
-	mutex_unlock(&dev->mutex);
+	mutex_unlock(&dev->bus_mutex);
 
 	return PAGE_SIZE - c;
 }

drivers/w1/w1.c

@@ -557,7 +557,7 @@ static int w1_uevent(struct device *dev, struct kobj_uevent_env *env)
 	struct w1_master *md = NULL;
 	struct w1_slave *sl = NULL;
 	char *event_owner, *name;
-	int err;
+	int err = 0;
 
 	if (dev->driver == &w1_master_driver) {
 		md = container_of(dev, struct w1_master, dev);
@@ -576,19 +576,17 @@ static int w1_uevent(struct device *dev, struct kobj_uevent_env *env)
 			event_owner, name, dev_name(dev));
 
 	if (dev->driver != &w1_slave_driver || !sl)
-		return 0;
+		goto end;
 
 	err = add_uevent_var(env, "W1_FID=%02X", sl->reg_num.family);
 	if (err)
-		return err;
+		goto end;
 
 	err = add_uevent_var(env, "W1_SLAVE_ID=%024LX",
 			     (unsigned long long)sl->reg_num.id);
-	if (err)
-		return err;
-
-	return 0;
-};
+end:
+	return err;
+}
 #else
 static int w1_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
@@ -887,16 +885,21 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
 		 *
 		 * Return 0 - device(s) present, 1 - no devices present.
 		 */
+		mutex_lock(&dev->bus_mutex);
 		if (w1_reset_bus(dev)) {
+			mutex_unlock(&dev->bus_mutex);
 			dev_dbg(&dev->dev, "No devices present on the wire.\n");
 			break;
 		}
 
 		/* Do fast search on single slave bus */
 		if (dev->max_slave_count == 1) {
+			int rv;
 			w1_write_8(dev, W1_READ_ROM);
+			rv = w1_read_block(dev, (u8 *)&rn, 8);
+			mutex_unlock(&dev->bus_mutex);
 
-			if (w1_read_block(dev, (u8 *)&rn, 8) == 8 && rn)
+			if (rv == 8 && rn)
 				cb(dev, rn);
 
 			break;
@@ -929,10 +932,12 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
 			rn |= (tmp64 << i);
 
 			if (kthread_should_stop()) {
+				mutex_unlock(&dev->bus_mutex);
 				dev_dbg(&dev->dev, "Abort w1_search\n");
 				return;
 			}
 		}
+		mutex_unlock(&dev->bus_mutex);
 
 		if ( (triplet_ret & 0x03) != 0x03 ) {
 			if ( (desc_bit == last_zero) || (last_zero < 0))

drivers/w1/w1.h

@@ -180,6 +180,7 @@ struct w1_master
 
 	struct task_struct	*thread;
 	struct mutex		mutex;
+	struct mutex		bus_mutex;
 
 	struct device_driver	*driver;
 	struct device		dev;

drivers/w1/w1_family.h

@@ -30,6 +30,7 @@
 #define W1_FAMILY_SMEM_01	0x01
 #define W1_FAMILY_SMEM_81	0x81
 #define W1_THERM_DS18S20 	0x10
+#define W1_FAMILY_DS28E04	0x1C
 #define W1_COUNTER_DS2423	0x1D
 #define W1_THERM_DS1822  	0x22
 #define W1_EEPROM_DS2433  	0x23

drivers/w1/w1_int.c

@@ -76,6 +76,7 @@ static struct w1_master * w1_alloc_dev(u32 id, int slave_count, int slave_ttl,
 
 	INIT_LIST_HEAD(&dev->slist);
 	mutex_init(&dev->mutex);
+	mutex_init(&dev->bus_mutex);
 
 	memcpy(&dev->dev, device, sizeof(struct device));
 	dev_set_name(&dev->dev, "w1_bus_master%u", dev->id);
@@ -117,7 +118,7 @@ int w1_add_master_device(struct w1_bus_master *master)
 		return(-EINVAL);
         }
 	/* While it would be electrically possible to make a device that
-	 * generated a strong pullup in bit bang mode, only hardare that
+	 * generated a strong pullup in bit bang mode, only hardware that
 	 * controls 1-wire time frames are even expected to support a strong
 	 * pullup.  w1_io.c would need to support calling set_pullup before
 	 * the last write_bit operation of a w1_write_8 which it currently

fs/debugfs/inode.c

@@ -495,7 +495,7 @@ void debugfs_remove(struct dentry *dentry)
 	struct dentry *parent;
 	int ret;
 
-	if (!dentry)
+	if (IS_ERR_OR_NULL(dentry))
 		return;
 
 	parent = dentry->d_parent;
@@ -527,7 +527,7 @@ void debugfs_remove_recursive(struct dentry *dentry)
 	struct dentry *child;
 	struct dentry *parent;
 
-	if (!dentry)
+	if (IS_ERR_OR_NULL(dentry))
 		return;
 
 	parent = dentry->d_parent;

fs/sysfs/dir.c

@@ -307,6 +307,7 @@ static int sysfs_dentry_revalidate(struct dentry *dentry, unsigned int flags)
 {
 	struct sysfs_dirent *sd;
 	int is_dir;
+	int type;
 
 	if (flags & LOOKUP_RCU)
 		return -ECHILD;
@@ -326,6 +327,15 @@ static int sysfs_dentry_revalidate(struct dentry *dentry, unsigned int flags)
 	if (strcmp(dentry->d_name.name, sd->s_name) != 0)
 		goto out_bad;
 
+	/* The sysfs dirent has been moved to a different namespace */
+	type = KOBJ_NS_TYPE_NONE;
+	if (sd->s_parent) {
+		type = sysfs_ns_type(sd->s_parent);
+		if (type != KOBJ_NS_TYPE_NONE &&
+				sysfs_info(dentry->d_sb)->ns[type] != sd->s_ns)
+			goto out_bad;
+	}
+
 	mutex_unlock(&sysfs_mutex);
 out_valid:
 	return 1;

include/linux/device.h

@@ -691,6 +691,11 @@ struct device {
 	struct iommu_group	*iommu_group;
 };
 
+static inline struct device *kobj_to_dev(struct kobject *kobj)
+{
+	return container_of(kobj, struct device, kobj);
+}
+
 /* Get the wakeup routines, which depend on struct device */
 #include <linux/pm_wakeup.h>
 

include/linux/extcon/extcon_gpio.h

@@ -31,7 +31,7 @@
  * @irq_flags	IRQ Flags (e.g., IRQF_TRIGGER_LOW).
  * @state_on	print_state is overriden with state_on if attached. If Null,
  *		default method of extcon class is used.
- * @state_off	print_state is overriden with state_on if dettached. If Null,
+ * @state_off	print_state is overriden with state_on if detached. If Null,
  *		default method of extcon class is used.
  *
  * Note that in order for state_on or state_off to be valid, both state_on

include/linux/genhd.h

@@ -16,7 +16,6 @@
 
 #ifdef CONFIG_BLOCK
 
-#define kobj_to_dev(k)		container_of((k), struct device, kobj)
 #define dev_to_disk(device)	container_of((device), struct gendisk, part0.__dev)
 #define dev_to_part(device)	container_of((device), struct hd_struct, __dev)
 #define disk_to_dev(disk)	(&(disk)->part0.__dev)

kernel/printk.c

@@ -216,6 +216,7 @@ struct log {
  */
 static DEFINE_RAW_SPINLOCK(logbuf_lock);
 
+#ifdef CONFIG_PRINTK
 /* the next printk record to read by syslog(READ) or /proc/kmsg */
 static u64 syslog_seq;
 static u32 syslog_idx;
@@ -228,14 +229,19 @@ static u32 log_first_idx;
 
 /* index and sequence number of the next record to store in the buffer */
 static u64 log_next_seq;
-#ifdef CONFIG_PRINTK
 static u32 log_next_idx;
 
+/* the next printk record to write to the console */
+static u64 console_seq;
+static u32 console_idx;
+static enum log_flags console_prev;
+
 /* the next printk record to read after the last 'clear' command */
 static u64 clear_seq;
 static u32 clear_idx;
 
-#define LOG_LINE_MAX 1024
+#define PREFIX_MAX		32
+#define LOG_LINE_MAX		1024 - PREFIX_MAX
 
 /* record buffer */
 #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
@@ -360,6 +366,7 @@ static void log_store(int facility, int level,
 struct devkmsg_user {
 	u64 seq;
 	u32 idx;
+	enum log_flags prev;
 	struct mutex lock;
 	char buf[8192];
 };
@@ -425,6 +432,7 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf,
 	struct log *msg;
 	u64 ts_usec;
 	size_t i;
+	char cont = '-';
 	size_t len;
 	ssize_t ret;
 
@@ -462,8 +470,25 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf,
 	msg = log_from_idx(user->idx);
 	ts_usec = msg->ts_nsec;
 	do_div(ts_usec, 1000);
-	len = sprintf(user->buf, "%u,%llu,%llu;",
-		      (msg->facility << 3) | msg->level, user->seq, ts_usec);
+
+	/*
+	 * If we couldn't merge continuation line fragments during the print,
+	 * export the stored flags to allow an optional external merge of the
+	 * records. Merging the records isn't always neccessarily correct, like
+	 * when we hit a race during printing. In most cases though, it produces
+	 * better readable output. 'c' in the record flags mark the first
+	 * fragment of a line, '+' the following.
+	 */
+	if (msg->flags & LOG_CONT && !(user->prev & LOG_CONT))
+		cont = 'c';
+	else if ((msg->flags & LOG_CONT) ||
+		 ((user->prev & LOG_CONT) && !(msg->flags & LOG_PREFIX)))
+		cont = '+';
+
+	len = sprintf(user->buf, "%u,%llu,%llu,%c;",
+		      (msg->facility << 3) | msg->level,
+		      user->seq, ts_usec, cont);
+	user->prev = msg->flags;
 
 	/* escape non-printable characters */
 	for (i = 0; i < msg->text_len; i++) {
@@ -646,6 +671,15 @@ void log_buf_kexec_setup(void)
 	VMCOREINFO_SYMBOL(log_buf_len);
 	VMCOREINFO_SYMBOL(log_first_idx);
 	VMCOREINFO_SYMBOL(log_next_idx);
+	/*
+	 * Export struct log size and field offsets. User space tools can
+	 * parse it and detect any changes to structure down the line.
+	 */
+	VMCOREINFO_STRUCT_SIZE(log);
+	VMCOREINFO_OFFSET(log, ts_nsec);
+	VMCOREINFO_OFFSET(log, len);
+	VMCOREINFO_OFFSET(log, text_len);
+	VMCOREINFO_OFFSET(log, dict_len);
 }
 #endif
 
@@ -876,7 +910,7 @@ static size_t msg_print_text(const struct log *msg, enum log_flags prev,
 
 		if (buf) {
 			if (print_prefix(msg, syslog, NULL) +
-			    text_len + 1>= size - len)
+			    text_len + 1 >= size - len)
 				break;
 
 			if (prefix)
@@ -907,7 +941,7 @@ static int syslog_print(char __user *buf, int size)
 	struct log *msg;
 	int len = 0;
 
-	text = kmalloc(LOG_LINE_MAX, GFP_KERNEL);
+	text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL);
 	if (!text)
 		return -ENOMEM;
 
@@ -930,7 +964,8 @@ static int syslog_print(char __user *buf, int size)
 
 		skip = syslog_partial;
 		msg = log_from_idx(syslog_idx);
-		n = msg_print_text(msg, syslog_prev, true, text, LOG_LINE_MAX);
+		n = msg_print_text(msg, syslog_prev, true, text,
+				   LOG_LINE_MAX + PREFIX_MAX);
 		if (n - syslog_partial <= size) {
 			/* message fits into buffer, move forward */
 			syslog_idx = log_next(syslog_idx);
@@ -969,7 +1004,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 	char *text;
 	int len = 0;
 
-	text = kmalloc(LOG_LINE_MAX, GFP_KERNEL);
+	text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL);
 	if (!text)
 		return -ENOMEM;
 
@@ -1022,7 +1057,8 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 			struct log *msg = log_from_idx(idx);
 			int textlen;
 
-			textlen = msg_print_text(msg, prev, true, text, LOG_LINE_MAX);
+			textlen = msg_print_text(msg, prev, true, text,
+						 LOG_LINE_MAX + PREFIX_MAX);
 			if (textlen < 0) {
 				len = textlen;
 				break;
@@ -1349,20 +1385,36 @@ static struct cont {
 	u64 ts_nsec;			/* time of first print */
 	u8 level;			/* log level of first message */
 	u8 facility;			/* log level of first message */
+	enum log_flags flags;		/* prefix, newline flags */
 	bool flushed:1;			/* buffer sealed and committed */
 } cont;
 
-static void cont_flush(void)
+static void cont_flush(enum log_flags flags)
 {
 	if (cont.flushed)
 		return;
 	if (cont.len == 0)
 		return;
 
-	log_store(cont.facility, cont.level, LOG_NOCONS, cont.ts_nsec,
-		  NULL, 0, cont.buf, cont.len);
-
-	cont.flushed = true;
+	if (cont.cons) {
+		/*
+		 * If a fragment of this line was directly flushed to the
+		 * console; wait for the console to pick up the rest of the
+		 * line. LOG_NOCONS suppresses a duplicated output.
+		 */
+		log_store(cont.facility, cont.level, flags | LOG_NOCONS,
+			  cont.ts_nsec, NULL, 0, cont.buf, cont.len);
+		cont.flags = flags;
+		cont.flushed = true;
+	} else {
+		/*
+		 * If no fragment of this line ever reached the console,
+		 * just submit it to the store and free the buffer.
+		 */
+		log_store(cont.facility, cont.level, flags, 0,
+			  NULL, 0, cont.buf, cont.len);
+		cont.len = 0;
+	}
 }
 
 static bool cont_add(int facility, int level, const char *text, size_t len)
@@ -1371,7 +1423,8 @@ static bool cont_add(int facility, int level, const char *text, size_t len)
 		return false;
 
 	if (cont.len + len > sizeof(cont.buf)) {
-		cont_flush();
+		/* the line gets too long, split it up in separate records */
+		cont_flush(LOG_CONT);
 		return false;
 	}
 
@@ -1380,12 +1433,17 @@ static bool cont_add(int facility, int level, const char *text, size_t len)
 		cont.level = level;
 		cont.owner = current;
 		cont.ts_nsec = local_clock();
+		cont.flags = 0;
 		cont.cons = 0;
 		cont.flushed = false;
 	}
 
 	memcpy(cont.buf + cont.len, text, len);
 	cont.len += len;
+
+	if (cont.len > (sizeof(cont.buf) * 80) / 100)
+		cont_flush(LOG_CONT);
+
 	return true;
 }
 
@@ -1394,7 +1452,7 @@ static size_t cont_print_text(char *text, size_t size)
 	size_t textlen = 0;
 	size_t len;
 
-	if (cont.cons == 0) {
+	if (cont.cons == 0 && (console_prev & LOG_NEWLINE)) {
 		textlen += print_time(cont.ts_nsec, text);
 		size -= textlen;
 	}
@@ -1409,7 +1467,8 @@ static size_t cont_print_text(char *text, size_t size)
 	}
 
 	if (cont.flushed) {
-		text[textlen++] = '\n';
+		if (cont.flags & LOG_NEWLINE)
+			text[textlen++] = '\n';
 		/* got everything, release buffer */
 		cont.len = 0;
 	}
@@ -1507,7 +1566,7 @@ asmlinkage int vprintk_emit(int facility, int level,
 		 * or another task also prints continuation lines.
 		 */
 		if (cont.len && (lflags & LOG_PREFIX || cont.owner != current))
-			cont_flush();
+			cont_flush(LOG_NEWLINE);
 
 		/* buffer line if possible, otherwise store it right away */
 		if (!cont_add(facility, level, text, text_len))
@@ -1525,7 +1584,7 @@ asmlinkage int vprintk_emit(int facility, int level,
 		if (cont.len && cont.owner == current) {
 			if (!(lflags & LOG_PREFIX))
 				stored = cont_add(facility, level, text, text_len);
-			cont_flush();
+			cont_flush(LOG_NEWLINE);
 		}
 
 		if (!stored)
@@ -1616,9 +1675,20 @@ asmlinkage int printk(const char *fmt, ...)
 }
 EXPORT_SYMBOL(printk);
 
-#else
+#else /* CONFIG_PRINTK */
 
+#define LOG_LINE_MAX		0
+#define PREFIX_MAX		0
 #define LOG_LINE_MAX 0
+static u64 syslog_seq;
+static u32 syslog_idx;
+static u64 console_seq;
+static u32 console_idx;
+static enum log_flags syslog_prev;
+static u64 log_first_seq;
+static u32 log_first_idx;
+static u64 log_next_seq;
+static enum log_flags console_prev;
 static struct cont {
 	size_t len;
 	size_t cons;
@@ -1902,10 +1972,34 @@ void wake_up_klogd(void)
 		this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
 }
 
-/* the next printk record to write to the console */
-static u64 console_seq;
-static u32 console_idx;
-static enum log_flags console_prev;
+static void console_cont_flush(char *text, size_t size)
+{
+	unsigned long flags;
+	size_t len;
+
+	raw_spin_lock_irqsave(&logbuf_lock, flags);
+
+	if (!cont.len)
+		goto out;
+
+	/*
+	 * We still queue earlier records, likely because the console was
+	 * busy. The earlier ones need to be printed before this one, we
+	 * did not flush any fragment so far, so just let it queue up.
+	 */
+	if (console_seq < log_next_seq && !cont.cons)
+		goto out;
+
+	len = cont_print_text(text, size);
+	raw_spin_unlock(&logbuf_lock);
+	stop_critical_timings();
+	call_console_drivers(cont.level, text, len);
+	start_critical_timings();
+	local_irq_restore(flags);
+	return;
+out:
+	raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+}
 
 /**
  * console_unlock - unlock the console system
@@ -1923,7 +2017,7 @@ static enum log_flags console_prev;
  */
 void console_unlock(void)
 {
-	static char text[LOG_LINE_MAX];
+	static char text[LOG_LINE_MAX + PREFIX_MAX];
 	static u64 seen_seq;
 	unsigned long flags;
 	bool wake_klogd = false;
@@ -1937,19 +2031,7 @@ void console_unlock(void)
 	console_may_schedule = 0;
 
 	/* flush buffered message fragment immediately to console */
-	raw_spin_lock_irqsave(&logbuf_lock, flags);
-	if (cont.len && (cont.cons < cont.len || cont.flushed)) {
-		size_t len;
-
-		len = cont_print_text(text, sizeof(text));
-		raw_spin_unlock(&logbuf_lock);
-		stop_critical_timings();
-		call_console_drivers(cont.level, text, len);
-		start_critical_timings();
-		local_irq_restore(flags);
-	} else
-		raw_spin_unlock_irqrestore(&logbuf_lock, flags);
-
+	console_cont_flush(text, sizeof(text));
 again:
 	for (;;) {
 		struct log *msg;
@@ -1986,6 +2068,7 @@ void console_unlock(void)
 			 * will properly dump everything later.
 			 */
 			msg->flags &= ~LOG_NOCONS;
+			console_prev = msg->flags;
 			goto skip;
 		}