drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge

Add a new DRM bridge driver for Cadence MHDP8546 DPTX IP used in TI J721E
SoC. MHDP DPTX IP is the component that complies with VESA DisplayPort (DP)
and embedded Display Port (eDP) standards. It integrates uCPU running the
embedded Firmware (FW) interfaced over APB interface.

Basically, it takes a DPI stream as input and outputs it encoded in DP
format. Currently, it supports only SST mode.
Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Co-developed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drivers/gpu/drm/bridge/Kconfig

@@ -241,6 +241,8 @@ source "drivers/gpu/drm/bridge/analogix/Kconfig"
 
 source "drivers/gpu/drm/bridge/adv7511/Kconfig"
 
+source "drivers/gpu/drm/bridge/cadence/Kconfig"
+
 source "drivers/gpu/drm/bridge/synopsys/Kconfig"
 
 endmenu

drivers/gpu/drm/bridge/Makefile

@@ -25,4 +25,5 @@ obj-$(CONFIG_DRM_TI_TPD12S015) += ti-tpd12s015.o
 obj-$(CONFIG_DRM_NWL_MIPI_DSI) += nwl-dsi.o
 
 obj-y += analogix/
+obj-y += cadence/
 obj-y += synopsys/

drivers/gpu/drm/bridge/cadence/Kconfig

+# SPDX-License-Identifier: GPL-2.0-only
+config DRM_CDNS_MHDP8546
+	tristate "Cadence DPI/DP bridge"
+	select DRM_KMS_HELPER
+	select DRM_PANEL_BRIDGE
+	depends on OF
+	help
+	  Support Cadence DPI to DP bridge. This is an internal
+	  bridge and is meant to be directly embedded in a SoC.
+	  It takes a DPI stream as input and outputs it encoded
+	  in DP format.

drivers/gpu/drm/bridge/cadence/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_DRM_CDNS_MHDP8546) += cdns-mhdp8546.o
+cdns-mhdp8546-y := cdns-mhdp8546-core.o