Commit fb896c91 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master

Pull ARM SoC DT fixes from Arnd Bergmann:
 "These are the latest device tree fixes for Arm SoCs:

   - TI Keystone2 ethernet regressed after a driver change broke with
     incorrect phy-mode in a board's DT source.

   - A similar fix is needed for two i.MX boards that were missed in an
     earlier bugfix.

   - DT change for Armada 38x allowing to add the register needed to fix
     NETA lockup when repeatedly switching speed.

   - One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
     detect work correctly.

   - Two fixes for the Allwinner SoCs, one to relax the CMA allocation
     ranges that were failing on older SoCs and one to fix Cedrus on the
     H6"

* tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phy
  ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds
  ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect
  ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2
  ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2
  arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage
  ARM: dts sunxi: Relax a bit the CMA pool allocation range
parents 4764e61e fe1d899f
......@@ -47,6 +47,9 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: Phandle to the device SRAM
iommus:
maxItems: 1
memory-region:
description:
CMA pool to use for buffers allocation instead of the default
......
......@@ -342,7 +342,8 @@ gateclk: clock-gating-control@18220 {
comphy: phy@18300 {
compatible = "marvell,armada-380-comphy";
reg = <0x18300 0x100>;
reg-names = "comphy", "conf";
reg = <0x18300 0x100>, <0x18460 4>;
#address-cells = <1>;
#size-cells = <0>;
......
......@@ -397,7 +397,7 @@ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
......@@ -409,6 +409,7 @@ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
>;
};
......
......@@ -99,7 +99,7 @@ ethphy1: ethernet-phy@1 {
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
......
......@@ -213,7 +213,7 @@ ethphy2: ethernet-phy@2 {
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&ethphy2>;
status = "okay";
};
......
......@@ -402,7 +402,7 @@ ethphy0: ethernet-phy@0 {
&gbe0 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-id";
phy-mode = "rgmii-rxid";
status = "okay";
};
......
......@@ -198,7 +198,7 @@ reserved-memory {
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
alloc-ranges = <0x4a000000 0x6000000>;
alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
......
......@@ -117,7 +117,7 @@ reserved-memory {
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
alloc-ranges = <0x4a000000 0x6000000>;
alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
......
......@@ -181,7 +181,7 @@ reserved-memory {
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
alloc-ranges = <0x4a000000 0x6000000>;
alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
......
......@@ -161,6 +161,7 @@ video-codec@1c0e000 {
resets = <&ccu RST_BUS_VE>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
allwinner,sram = <&ve_sram 1>;
iommus = <&iommu 3>;
};
gpu: gpu@1800000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment