Merge branch 'drm-intel-fixes' of...

Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: fix corruptions on i8xx due to relaxed fencing
  drm/i915: skip FDI & PCH enabling for DP_A
  agp/intel: Experiment with a 855GM GWB bit
  drm/i915: don't enable FDI & transcoder interrupts after all
  drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch

drivers/char/agp/intel-agp.h

@@ -130,6 +130,7 @@
 #define INTEL_GMCH_GMS_STOLEN_352M	(0xd << 4)
 
 #define I915_IFPADDR    0x60
+#define I830_HIC        0x70
 
 /* Intel 965G registers */
 #define I965_MSAC 0x62

drivers/char/agp/intel-gtt.c

@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/pagemap.h>
 #include <linux/agp_backend.h>
+#include <linux/delay.h>
 #include <asm/smp.h>
 #include "agp.h"
 #include "intel-agp.h"
@@ -70,12 +71,8 @@ static struct _intel_private {
 	u32 __iomem *gtt;		/* I915G */
 	bool clear_fake_agp; /* on first access via agp, fill with scratch */
 	int num_dcache_entries;
-	union {
-		void __iomem *i9xx_flush_page;
-		void *i8xx_flush_page;
-	};
+	void __iomem *i9xx_flush_page;
 	char *i81x_gtt_table;
-	struct page *i8xx_page;
 	struct resource ifp_resource;
 	int resource_valid;
 	struct page *scratch_page;
@@ -722,28 +719,6 @@ static int intel_fake_agp_fetch_size(void)
 
 static void i830_cleanup(void)
 {
-	if (intel_private.i8xx_flush_page) {
-		kunmap(intel_private.i8xx_flush_page);
-		intel_private.i8xx_flush_page = NULL;
-	}
-
-	__free_page(intel_private.i8xx_page);
-	intel_private.i8xx_page = NULL;
-}
-
-static void intel_i830_setup_flush(void)
-{
-	/* return if we've already set the flush mechanism up */
-	if (intel_private.i8xx_page)
-		return;
-
-	intel_private.i8xx_page = alloc_page(GFP_KERNEL);
-	if (!intel_private.i8xx_page)
-		return;
-
-	intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page);
-	if (!intel_private.i8xx_flush_page)
-		i830_cleanup();
 }
 
 /* The chipset_flush interface needs to get data that has already been
@@ -758,14 +733,27 @@ static void intel_i830_setup_flush(void)
  */
 static void i830_chipset_flush(void)
 {
-	unsigned int *pg = intel_private.i8xx_flush_page;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+
+	/* Forcibly evict everything from the CPU write buffers.
+	 * clflush appears to be insufficient.
+	 */
+	wbinvd_on_all_cpus();
+
+	/* Now we've only seen documents for this magic bit on 855GM,
+	 * we hope it exists for the other gen2 chipsets...
+	 *
+	 * Also works as advertised on my 845G.
+	 */
+	writel(readl(intel_private.registers+I830_HIC) | (1<<31),
+	       intel_private.registers+I830_HIC);
 
-	memset(pg, 0, 1024);
+	while (readl(intel_private.registers+I830_HIC) & (1<<31)) {
+		if (time_after(jiffies, timeout))
+			break;
 
-	if (cpu_has_clflush)
-		clflush_cache_range(pg, 1024);
-	else if (wbinvd_on_all_cpus() != 0)
-		printk(KERN_ERR "Timed out waiting for cache flush.\n");
+		udelay(50);
+	}
 }
 
 static void i830_write_entry(dma_addr_t addr, unsigned int entry,
@@ -849,8 +837,6 @@ static int i830_setup(void)
 
 	intel_private.gtt_bus_addr = reg_addr + I810_PTE_BASE;
 
-	intel_i830_setup_flush();
-
 	return 0;
 }
 

drivers/gpu/drm/i915/i915_gem_tiling.c

@@ -184,7 +184,7 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 static bool
 i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
 {
-	int tile_width;
+	int tile_width, tile_height;
 
 	/* Linear is always fine */
 	if (tiling_mode == I915_TILING_NONE)
@@ -215,6 +215,20 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
 		}
 	}
 
+	if (IS_GEN2(dev) ||
+	    (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
+		tile_height = 32;
+	else
+		tile_height = 8;
+	/* i8xx is strange: It has 2 interleaved rows of tiles, so needs an even
+	 * number of tile rows. */
+	if (IS_GEN2(dev))
+		tile_height *= 2;
+
+	/* Size needs to be aligned to a full tile row */
+	if (size & (tile_height * stride - 1))
+		return false;
+
 	/* 965+ just needs multiples of tile width */
 	if (INTEL_INFO(dev)->gen >= 4) {
 		if (stride & (tile_width - 1))

drivers/gpu/drm/i915/i915_irq.c

@@ -316,6 +316,8 @@ static void i915_hotplug_work_func(struct work_struct *work)
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct intel_encoder *encoder;
 
+	DRM_DEBUG_KMS("running encoder hotplug functions\n");
+
 	list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
 		if (encoder->hot_plug)
 			encoder->hot_plug(encoder);
@@ -1649,9 +1651,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 	} else {
 		hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
 			       SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
-		hotplug_mask |= SDE_AUX_MASK | SDE_FDI_MASK | SDE_TRANS_MASK;
-		I915_WRITE(FDI_RXA_IMR, 0);
-		I915_WRITE(FDI_RXB_IMR, 0);
+		hotplug_mask |= SDE_AUX_MASK;
 	}
 
 	dev_priv->pch_irq_mask = ~hotplug_mask;

drivers/gpu/drm/i915/intel_display.c

@@ -1630,19 +1630,19 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
 
 		wait_event(dev_priv->pending_flip_queue,
+			   atomic_read(&dev_priv->mm.wedged) ||
 			   atomic_read(&obj->pending_flip) == 0);
 
 		/* Big Hammer, we also need to ensure that any pending
 		 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
 		 * current scanout is retired before unpinning the old
 		 * framebuffer.
+		 *
+		 * This should only fail upon a hung GPU, in which case we
+		 * can safely continue.
 		 */
 		ret = i915_gem_object_flush_gpu(obj, false);
-		if (ret) {
-			i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
-			mutex_unlock(&dev->struct_mutex);
-			return ret;
-		}
+		(void) ret;
 	}
 
 	ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
@@ -2045,6 +2045,31 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
 		   atomic_read(&obj->pending_flip) == 0);
 }
 
+static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+
+	/*
+	 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
+	 * must be driven by its own crtc; no sharing is possible.
+	 */
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+		if (encoder->base.crtc != crtc)
+			continue;
+
+		switch (encoder->type) {
+		case INTEL_OUTPUT_EDP:
+			if (!intel_encoder_is_pch_edp(&encoder->base))
+				return false;
+			continue;
+		}
+	}
+
+	return true;
+}
+
 static void ironlake_crtc_enable(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -2053,6 +2078,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	u32 reg, temp;
+	bool is_pch_port = false;
 
 	if (intel_crtc->active)
 		return;
@@ -2066,7 +2092,56 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 			I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
 	}
 
-	ironlake_fdi_enable(crtc);
+	is_pch_port = intel_crtc_driving_pch(crtc);
+
+	if (is_pch_port)
+		ironlake_fdi_enable(crtc);
+	else {
+		/* disable CPU FDI tx and PCH FDI rx */
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
+		POSTING_READ(reg);
+
+		reg = FDI_RX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~(0x7 << 16);
+		temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+		I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
+
+		POSTING_READ(reg);
+		udelay(100);
+
+		/* Ironlake workaround, disable clock pointer after downing FDI */
+		if (HAS_PCH_IBX(dev))
+			I915_WRITE(FDI_RX_CHICKEN(pipe),
+				   I915_READ(FDI_RX_CHICKEN(pipe) &
+					     ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+
+		/* still set train pattern 1 */
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+		I915_WRITE(reg, temp);
+
+		reg = FDI_RX_CTL(pipe);
+		temp = I915_READ(reg);
+		if (HAS_PCH_CPT(dev)) {
+			temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+			temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+		} else {
+			temp &= ~FDI_LINK_TRAIN_NONE;
+			temp |= FDI_LINK_TRAIN_PATTERN_1;
+		}
+		/* BPC in FDI rx is consistent with that in PIPECONF */
+		temp &= ~(0x07 << 16);
+		temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		udelay(100);
+	}
 
 	/* Enable panel fitting for LVDS */
 	if (dev_priv->pch_pf_size &&
@@ -2100,6 +2175,10 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 		intel_flush_display_plane(dev, plane);
 	}
 
+	/* Skip the PCH stuff if possible */
+	if (!is_pch_port)
+		goto done;
+
 	/* For PCH output, training FDI link */
 	if (IS_GEN6(dev))
 		gen6_fdi_link_train(crtc);
@@ -2184,7 +2263,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	I915_WRITE(reg, temp | TRANS_ENABLE);
 	if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
 		DRM_ERROR("failed to enable transcoder %d\n", pipe);
-
+done:
 	intel_crtc_load_lut(crtc);
 	intel_update_fbc(dev);
 	intel_crtc_update_cursor(crtc, true);