Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel

arch/arm/common/clkdev.c

@@ -62,9 +62,8 @@ static struct clk *clk_find(const char *dev_id, const char *con_id)
 	return clk;
 }
 
-struct clk *clk_get(struct device *dev, const char *con_id)
+struct clk *clk_get_sys(const char *dev_id, const char *con_id)
 {
-	const char *dev_id = dev ? dev_name(dev) : NULL;
 	struct clk *clk;
 
 	mutex_lock(&clocks_mutex);
@@ -75,6 +74,14 @@ struct clk *clk_get(struct device *dev, const char *con_id)
 
 	return clk ? clk : ERR_PTR(-ENOENT);
 }
+EXPORT_SYMBOL(clk_get_sys);
+
+struct clk *clk_get(struct device *dev, const char *con_id)
+{
+	const char *dev_id = dev ? dev_name(dev) : NULL;
+
+	return clk_get_sys(dev_id, con_id);
+}
 EXPORT_SYMBOL(clk_get);
 
 void clk_put(struct clk *clk)

arch/arm/mach-imx/generic.c

@@ -29,7 +29,6 @@
 #include <linux/string.h>
 
 #include <asm/errno.h>
-#include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/imx-regs.h>
 
@@ -245,43 +244,8 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
 	imx_mmc_device.dev.platform_data = info;
 }
 
-static struct imx_fb_platform_data imx_fb_info;
-
-void __init set_imx_fb_info(struct imx_fb_platform_data *hard_imx_fb_info)
-{
-	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imx_fb_platform_data));
-}
-
-static struct resource imxfb_resources[] = {
-	[0] = {
-		.start	= 0x00205000,
-		.end	= 0x002050FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LCDC_INT,
-		.end	= LCDC_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 fb_dma_mask = ~(u64)0;
-
-static struct platform_device imxfb_device = {
-	.name		= "imx-fb",
-	.id		= 0,
-	.dev		= {
- 		.platform_data	= &imx_fb_info,
-		.dma_mask	= &fb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(imxfb_resources),
-	.resource	= imxfb_resources,
-};
-
 static struct platform_device *devices[] __initdata = {
 	&imx_mmc_device,
-	&imxfb_device,
 };
 
 static struct map_desc imx_io_desc[] __initdata = {

arch/arm/mach-mx2/Makefile

@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y	:=  system.o generic.o devices.o serial.o
+obj-y	:=  generic.o devices.o serial.o
 
 obj-$(CONFIG_MACH_MX21) += clock_imx21.o
 

arch/arm/mach-mx2/devices.c

@@ -229,7 +229,6 @@ struct platform_device mxc_nand_device = {
 	.resource = mxc_nand_resources,
 };
 
-#ifdef CONFIG_FB_IMX
 /*
  * lcdc:
  * - i.MX1: the basic controller
@@ -259,7 +258,6 @@ struct platform_device mxc_fb_device = {
 		.coherent_dma_mask = 0xFFFFFFFF,
 	},
 };
-#endif
 
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_fec_resources[] = {

arch/arm/plat-mxc/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o
+obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o

arch/arm/plat-mxc/include/mach/system.h

@@ -26,9 +26,6 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	cpu_reset(0);
-}
+void arch_reset(char mode, const char *cmd);
 
 #endif /* __ASM_ARCH_MXC_SYSTEM_H__ */

arch/arm/mach-mx2/system.c → arch/arm/plat-mxc/system.c

@@ -3,6 +3,7 @@
  * Copyright (C) 2000 Deep Blue Solutions Ltd
  * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,42 +23,45 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
-/*
- * Put the CPU into idle mode. It is called by default_idle()
- * in process.c file.
- */
-void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks.
-	 */
-	cpu_do_idle();
-}
-
-#define WDOG_WCR_REG                    IO_ADDRESS(WDOG_BASE_ADDR)
-#define WDOG_WCR_SRS                    (1 << 4)
+#ifdef CONFIG_ARCH_MX1
+#define WDOG_WCR_REG		IO_ADDRESS(WDT_BASE_ADDR)
+#define WDOG_WCR_ENABLE		(1 << 0)
+#else
+#define WDOG_WCR_REG		IO_ADDRESS(WDOG_BASE_ADDR)
+#define WDOG_WCR_ENABLE		(1 << 2)
+#endif
 
 /*
  * Reset the system. It is called by machine_restart().
  */
 void arch_reset(char mode, const char *cmd)
 {
-	struct clk *clk;
+	if (!cpu_is_mx1()) {
+		struct clk *clk;
 
-	clk = clk_get(NULL, "wdog_clk");
-	if (!clk) {
-		printk(KERN_ERR"Cannot activate the watchdog. Giving up\n");
-		return;
+		clk = clk_get_sys("imx-wdt.0", NULL);
+		if (!IS_ERR(clk))
+			clk_enable(clk);
 	}
 
-	clk_enable(clk);
-
 	/* Assert SRS signal */
-	__raw_writew(__raw_readw(WDOG_WCR_REG) & ~WDOG_WCR_SRS, WDOG_WCR_REG);
+	__raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+
+	/* we'll take a jump through zero as a poor second */
+	cpu_reset(0);
 }

drivers/video/imxfb.c

@@ -26,9 +26,11 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
+#include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
+#include <linux/math64.h>
 
 #include <mach/imxfb.h>
 
@@ -141,6 +143,7 @@ struct imxfb_rgb {
 struct imxfb_info {
 	struct platform_device  *pdev;
 	void __iomem		*regs;
+	struct clk		*clk;
 
 	u_int			max_bpp;
 	u_int			max_xres;
@@ -324,7 +327,7 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		break;
 	case 16:
 	default:
-		if (readl(fbi->regs + LCDC_PCR) & PCR_TFT)
+		if (fbi->pcr & PCR_TFT)
 			rgb = &def_rgb_16_tft;
 		else
 			rgb = &def_rgb_16_stn;
@@ -403,6 +406,8 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 
 	writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR);
 
+	clk_enable(fbi->clk);
+
 	if (fbi->backlight_power)
 		fbi->backlight_power(1);
 	if (fbi->lcd_power)
@@ -418,6 +423,8 @@ static void imxfb_disable_controller(struct imxfb_info *fbi)
 	if (fbi->lcd_power)
 		fbi->lcd_power(0);
 
+	clk_disable(fbi->clk);
+
 	writel(0, fbi->regs + LCDC_RMCR);
 }
 
@@ -461,6 +468,9 @@ static struct fb_ops imxfb_ops = {
 static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	struct imxfb_info *fbi = info->par;
+	unsigned int pcr, lcd_clk;
+	unsigned long long tmp;
+
 	pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n",
 		var->xres, var->hsync_len,
 		var->left_margin, var->right_margin);
@@ -507,7 +517,23 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 
 	writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres),
 			fbi->regs + LCDC_SIZE);
-	writel(fbi->pcr, fbi->regs + LCDC_PCR);
+
+	lcd_clk = clk_get_rate(fbi->clk);
+	tmp = var->pixclock * (unsigned long long)lcd_clk;
+	do_div(tmp, 1000000);
+	if (do_div(tmp, 1000000) > 500000)
+		tmp++;
+	pcr = (unsigned int)tmp;
+	if (--pcr > 0x3F) {
+		pcr = 0x3F;
+		printk(KERN_WARNING "Must limit pixel clock to %uHz\n",
+				lcd_clk / pcr);
+	}
+
+	/* add sync polarities */
+	pcr |= fbi->pcr & ~0x3F;
+
+	writel(pcr, fbi->regs + LCDC_PCR);
 	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
@@ -649,6 +675,13 @@ static int __init imxfb_probe(struct platform_device *pdev)
 		goto failed_req;
 	}
 
+	fbi->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(fbi->clk)) {
+		ret = PTR_ERR(fbi->clk);;
+		dev_err(&pdev->dev, "unable to get clock: %d\n", ret);
+		goto failed_getclock;
+	}
+
 	fbi->regs = ioremap(res->start, resource_size(res));
 	if (fbi->regs == NULL) {
 		printk(KERN_ERR"Cannot map frame buffer registers\n");
@@ -717,6 +750,8 @@ static int __init imxfb_probe(struct platform_device *pdev)
 		dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu,
 			fbi->map_dma);
 failed_map:
+	clk_put(fbi->clk);
+failed_getclock:
 	iounmap(fbi->regs);
 failed_ioremap:
 	release_mem_region(res->start, res->end - res->start);
@@ -751,6 +786,9 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 
 	iounmap(fbi->regs);
 	release_mem_region(res->start, res->end - res->start + 1);
+	clk_disable(fbi->clk);
+	clk_put(fbi->clk);
+
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;

include/linux/clk.h

@@ -125,4 +125,21 @@ int clk_set_parent(struct clk *clk, struct clk *parent);
  */
 struct clk *clk_get_parent(struct clk *clk);
 
+/**
+ * clk_get_sys - get a clock based upon the device name
+ * @dev_id: device name
+ * @con_id: connection ID
+ *
+ * Returns a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev_id and @con_id to determine the clock consumer, and
+ * thereby the clock producer. In contrast to clk_get() this function
+ * takes the device name instead of the device itself for identification.
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_get_sys should not be called from within interrupt context.
+ */
+struct clk *clk_get_sys(const char *dev_id, const char *con_id);
+
 #endif