[ARM PATCH] 2231/1: remove unused file in iop321 port

Patch from Dave Jiang

Remove nolonger used file from arch/arm/mach-iop3xx/mm-321.c

Signed-off-by: Dave Jiang
Signed-off-by: Russell King

arch/arm/mach-iop3xx/mm-321.c

-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for IOP321 based systems
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/config.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * Standard IO mapping for all IOP321 based systems
- */
-static struct map_desc iop80321_std_desc[] __initdata = {
- /* virtual     physical      length      type */
-
- /* mem mapped registers */
- { IOP321_VIRT_MEM_BASE,  IOP321_PHY_MEM_BASE,   0x00002000,  MT_DEVICE },
-
- /* PCI IO space */
- { 0xfe000000,  0x90000000,   0x00020000,  MT_DEVICE }
-};
-
-void __init iop321_map_io(void)
-{
-	iotable_init(iop80321_std_desc, ARRAY_SIZE(iop80321_std_desc));
-}
-
-/*
- * IQ80321 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-#ifdef CONFIG_ARCH_IQ80321
-static struct map_desc iq80321_io_desc[] __initdata = {
- /* virtual     physical      length        type */
-
- /* on-board devices */
- { 0xfe800000,  IQ80321_UART1,   0x00100000,   MT_DEVICE }
-};
-
-void __init iq80321_map_io(void)
-{
-	iop321_map_io();
-
-	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
-#endif // CONFIG_ARCH_IQ80321