Skip to content

L
linux
Commit fd8d4735 authored by Krzysztof Helt's avatar Krzysztof Helt Committed by Takashi Iwai
Browse files
Options

ALSA: opti92x: use PnP data to select Master Control port 

The Master Control port (MC) is available as the last
PnP resource (OPT005). Use this value instead fo guessing.

Also, add some comments to the code.
Signed-off-by: default avatarKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 864c1108
Hide whitespace changes
Inline Side-by-side
Showing with 79 additions and 43 deletions
sound/isa/opti9xx/miro.c
View file @ fd8d4735
......@@ -1558,7 +1558,7 @@ static int __devinit snd_card_miro_pnp(struct snd_miro *chip,
err = pnp_activate_dev(devmc);
if (err < 0) {
snd_printk(KERN_ERR "OPL syntg pnp configure failure: %d\n",
snd_printk(KERN_ERR "MC pnp configure failure: %d\n",
err);
return err;
}
......
sound/isa/opti9xx/opti92x-ad1848.c
View file @ fd8d4735
......@@ -144,12 +144,8 @@ struct snd_opti9xx {
spinlock_t lock;
long wss_base;
int irq;
#ifdef CONFIG_PNP
struct pnp_dev *dev;
struct pnp_dev *devmpu;
#endif /* CONFIG_PNP */
};
static int snd_opti9xx_pnp_is_probed;
......@@ -159,12 +155,17 @@ static int snd_opti9xx_pnp_is_probed;
static struct pnp_card_device_id snd_opti9xx_pnpids[] = {
#ifndef OPTi93X
/* OPTi 82C924 */
{ .id = "OPT0924", .devs = { { "OPT0000" }, { "OPT0002" } }, .driver_data = 0x0924 },
{ .id = "OPT0924",
.devs = { { "OPT0000" }, { "OPT0002" }, { "OPT0005" } },
.driver_data = 0x0924 },
/* OPTi 82C925 */
{ .id = "OPT0925", .devs = { { "OPT9250" }, { "OPT0002" } }, .driver_data = 0x0925 },
{ .id = "OPT0925",
.devs = { { "OPT9250" }, { "OPT0002" }, { "OPT0005" } },
.driver_data = 0x0925 },
#else
/* OPTi 82C931/3 */
{ .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } }, .driver_data = 0x0931 },
{ .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } },
.driver_data = 0x0931 },
#endif /* OPTi93X */
{ .id = "" }
};
......@@ -207,24 +208,34 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip,
chip->hardware = hardware;
strcpy(chip->name, snd_opti9xx_names[hardware]);
chip->mc_base_size = opti9xx_mc_size[hardware];
spin_lock_init(&chip->lock);
chip->irq = -1;
#ifndef OPTi93X
#ifdef CONFIG_PNP
if (isapnp && chip->mc_base)
/* PnP resource gives the least 10 bits */
chip->mc_base |= 0xc00;
#endif /* CONFIG_PNP */
else {
chip->mc_base = 0xf8c;
chip->mc_base_size = opti9xx_mc_size[hardware];
}
#else
chip->mc_base_size = opti9xx_mc_size[hardware];
#endif
switch (hardware) {
#ifndef OPTi93X
case OPTi9XX_HW_82C928:
case OPTi9XX_HW_82C929:
chip->mc_base = 0xf8c;
chip->password = (hardware == OPTi9XX_HW_82C928) ? 0xe2 : 0xe3;
chip->pwd_reg = 3;
break;
case OPTi9XX_HW_82C924:
case OPTi9XX_HW_82C925:
chip->mc_base = 0xf8c;
chip->password = 0xe5;
chip->pwd_reg = 3;
break;
......@@ -292,7 +303,7 @@ static unsigned char snd_opti9xx_read(struct snd_opti9xx *chip,
spin_unlock_irqrestore(&chip->lock, flags);
return retval;
}
static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
unsigned char value)
{
......@@ -341,7 +352,7 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
long wss_base,
long port,
int irq, int dma1, int dma2,
long mpu_port, int mpu_irq)
{
......@@ -354,16 +365,23 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
switch (chip->hardware) {
#ifndef OPTi93X
case OPTi9XX_HW_82C924:
/* opti 929 mode (?), OPL3 clock output, audio enable */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(4), 0xf0, 0xfc);
/* enable wave audio */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x02);
case OPTi9XX_HW_82C925:
/* enable WSS mode */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
/* OPL3 FM synthesis */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), 0x00, 0x20);
/* disable Sound Blaster IRQ and DMA */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
#ifdef CS4231
/* cs4231/4248 fix enabled */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
#else
/* cs4231/4248 fix disabled */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x00, 0x02);
#endif /* CS4231 */
break;
......@@ -411,21 +429,26 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
return -EINVAL;
}
switch (wss_base) {
case 0x530:
/* PnP resource says it decodes only 10 bits of address */
switch (port & 0x3ff) {
case 0x130:
chip->wss_base = 0x530;
wss_base_bits = 0x00;
break;
case 0x604:
case 0x204:
chip->wss_base = 0x604;
wss_base_bits = 0x03;
break;
case 0xe80:
case 0x280:
chip->wss_base = 0xe80;
wss_base_bits = 0x01;
break;
case 0xf40:
case 0x340:
chip->wss_base = 0xf40;
wss_base_bits = 0x02;
break;
default:
snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base);
snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", port);
goto __skip_base;
}
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
......@@ -487,7 +510,7 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
#endif /* CS4231 || OPTi93X */
#ifndef OPTi93X
outb(irq_bits << 3 | dma_bits, wss_base);
outb(irq_bits << 3 | dma_bits, chip->wss_base);
#else /* OPTi93X */
snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits));
#endif /* OPTi93X */
......@@ -729,15 +752,15 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
{
struct pnp_dev *pdev;
int err;
struct pnp_dev *devmpu;
#ifndef OPTi93X
struct pnp_dev *devmc;
#endif
chip->dev = pnp_request_card_device(card, pid->devs[0].id, NULL);
if (chip->dev == NULL)
pdev = pnp_request_card_device(card, pid->devs[0].id, NULL);
if (pdev == NULL)
return -EBUSY;
chip->devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
pdev = chip->dev;
err = pnp_activate_dev(pdev);
if (err < 0) {
snd_printk(KERN_ERR "AUDIO pnp configure failure: %d\n", err);
......@@ -750,9 +773,24 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
chip->mc_indir_index = pnp_port_start(pdev, 3) + 2;
chip->mc_indir_size = pnp_port_len(pdev, 3) - 2;
#else
if (pid->driver_data != 0x0924)
port = pnp_port_start(pdev, 1);
devmc = pnp_request_card_device(card, pid->devs[2].id, NULL);
if (devmc == NULL)
return -EBUSY;
err = pnp_activate_dev(devmc);
if (err < 0) {
snd_printk(KERN_ERR "MC pnp configure failure: %d\n", err);
return err;
}
port = pnp_port_start(pdev, 1);
fm_port = pnp_port_start(pdev, 2) + 8;
/*
* The MC(0) is never accessed and card does not
* include it in the PnP resource range. OPTI93x include it.
*/
chip->mc_base = pnp_port_start(devmc, 0) - 1;
chip->mc_base_size = pnp_port_len(devmc, 0) + 1;
#endif /* OPTi93X */
irq = pnp_irq(pdev, 0);
dma1 = pnp_dma(pdev, 0);
......@@ -760,16 +798,16 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
dma2 = pnp_dma(pdev, 1);
#endif /* CS4231 || OPTi93X */
pdev = chip->devmpu;
if (pdev && mpu_port > 0) {
err = pnp_activate_dev(pdev);
devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
if (devmpu && mpu_port > 0) {
err = pnp_activate_dev(devmpu);
if (err < 0) {
snd_printk(KERN_ERR "AUDIO pnp configure failure\n");
snd_printk(KERN_ERR "MPU401 pnp configure failure\n");
mpu_port = -1;
chip->devmpu = NULL;
} else {
mpu_port = pnp_port_start(pdev, 0);
mpu_irq = pnp_irq(pdev, 0);
mpu_port = pnp_port_start(devmpu, 0);
mpu_irq = pnp_irq(devmpu, 0);
}
}
return pid->driver_data;
......@@ -824,7 +862,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
if (error)
return error;
error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2,
error = snd_wss_create(card, chip->wss_base + 4, -1, irq, dma1, xdma2,
#ifdef OPTi93X
WSS_HW_OPTI93X, WSS_HWSHARE_IRQ,
#else
......@@ -865,10 +903,11 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
sprintf(card->shortname, "OPTi %s", card->driver);
#if defined(CS4231) || defined(OPTi93X)
sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d",
card->shortname, pcm->name, port + 4, irq, dma1, xdma2);
card->shortname, pcm->name,
chip->wss_base + 4, irq, dma1, xdma2);
#else
sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d",
card->shortname, pcm->name, port + 4, irq, dma1);
card->shortname, pcm->name, chip->wss_base + 4, irq, dma1);
#endif /* CS4231 || OPTi93X */
if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT)
......@@ -1062,9 +1101,6 @@ static int __devinit snd_opti9xx_pnp_probe(struct pnp_card_link *pcard,
snd_card_free(card);
return error;
}
if (hw <= OPTi9XX_HW_82C930)
chip->mc_base -= 0x80;
error = snd_opti9xx_read_check(chip);
if (error) {
snd_printk(KERN_ERR "OPTI chip not found\n");
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7