Commit fd9071ec authored by Masanari Iida's avatar Masanari Iida Committed by David S. Miller

net: Fix spelling typo in net

Correct spelling typo within drivers/net.
Signed-off-by: default avatarMasanari Iida <standby24x7@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a8cb05b2
......@@ -83,7 +83,7 @@ static const char main_strings[][ETH_GSTRING_LEN] = {
#define NUM_ALL_STATS (NUM_MAIN_STATS + NUM_PORT_STATS + NUM_PKT_STATS + NUM_PERF_STATS)
static const char mlx4_en_test_names[][ETH_GSTRING_LEN]= {
"Interupt Test",
"Interrupt Test",
"Link Test",
"Speed Test",
"Register Test",
......
......@@ -3845,7 +3845,7 @@ static int ql_wol(struct ql_adapter *qdev)
if (qdev->wol & (WAKE_ARP | WAKE_MAGICSECURE | WAKE_PHY | WAKE_UCAST |
WAKE_MCAST | WAKE_BCAST)) {
netif_err(qdev, ifdown, qdev->ndev,
"Unsupported WOL paramter. qdev->wol = 0x%x.\n",
"Unsupported WOL parameter. qdev->wol = 0x%x.\n",
qdev->wol);
return -EINVAL;
}
......
......@@ -1317,7 +1317,7 @@ static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len,
static void print_rxfd(struct rxf_desc *rxfd)
{
DBG("=== RxF desc CHIP ORDER/ENDIANESS =============\n"
DBG("=== RxF desc CHIP ORDER/ENDIANNESS =============\n"
"info 0x%x va_lo %u pa_lo 0x%x pa_hi 0x%x len 0x%x\n",
rxfd->info, rxfd->va_lo, rxfd->pa_lo, rxfd->pa_hi, rxfd->len);
}
......
......@@ -2545,7 +2545,7 @@ static void tlan_phy_reset(struct net_device *dev)
phy = priv->phy[priv->phy_num];
TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Reseting PHY.\n", dev->name);
TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Resetting PHY.\n", dev->name);
tlan_mii_sync(dev->base_addr);
value = MII_GC_LOOPBK | MII_GC_RESET;
tlan_mii_write_reg(dev, phy, MII_GEN_CTL, value);
......
......@@ -737,7 +737,7 @@ static int sh_irda_stop(struct net_device *ndev)
netif_stop_queue(ndev);
pm_runtime_put_sync(&self->pdev->dev);
dev_info(&ndev->dev, "stoped\n");
dev_info(&ndev->dev, "stopped\n");
return 0;
}
......
......@@ -685,7 +685,7 @@ static int sh_sir_stop(struct net_device *ndev)
netif_stop_queue(ndev);
dev_info(&ndev->dev, "stoped\n");
dev_info(&ndev->dev, "stopped\n");
return 0;
}
......
......@@ -1120,7 +1120,7 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/
{
lmc_softc_t *sc = dev_to_sc(dev);
lmc_trace(dev, "lmc_runnig_reset in");
lmc_trace(dev, "lmc_running_reset in");
/* stop interrupts */
/* Clear the interrupt mask */
......
......@@ -695,7 +695,7 @@ int i2400mu_resume(struct usb_interface *iface)
d_fnstart(3, dev, "(iface %p)\n", iface);
rmb(); /* see i2400m->updown's documentation */
if (i2400m->updown == 0) {
d_printf(1, dev, "fw was down, no resume neeed\n");
d_printf(1, dev, "fw was down, no resume needed\n");
goto out;
}
d_printf(1, dev, "fw was up, resuming\n");
......
......@@ -3785,7 +3785,7 @@ IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
IPW2100_ORD(COUNTRY_CODE,
"IEEE country code as recv'd from beacon"),
IPW2100_ORD(COUNTRY_CHANNELS,
"channels suported by country"),
"channels supported by country"),
IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
IPW2100_ORD(ANTENNA_DIVERSITY,
......@@ -4074,7 +4074,7 @@ static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
ipw2100_firmware.version = 0;
#endif
printk(KERN_INFO "%s: Reseting on mode change.\n", priv->net_dev->name);
printk(KERN_INFO "%s: Resetting on mode change.\n", priv->net_dev->name);
priv->reset_backoff = 0;
schedule_reset(priv);
......
......@@ -7024,7 +7024,7 @@ static int ipw_qos_activate(struct ipw_priv *priv,
cpu_to_le16(burst_duration);
} else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
if (type == IEEE_B) {
IPW_DEBUG_QOS("QoS activate IBSS nework mode %d\n",
IPW_DEBUG_QOS("QoS activate IBSS network mode %d\n",
type);
if (priv->qos_data.qos_enable == 0)
active_one = &def_parameters_CCK;
......
......@@ -1745,7 +1745,7 @@ static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
break;
default:
chipver |= CHIP_92D_D_CUT;
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unkown CUT!\n");
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown CUT!\n");
break;
}
rtlpriv->rtlhal.version = chipver;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment