Merge tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc cleanups, part 2, from Arnd Bergmann:
 "These omap cleanups have dependencies on earlier omap branches that in
  turn depend on other cleanups, so they could not go into the same
  branch."

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP: sdrc: Fix the build break for OMAP4 only builds
  ARM: OMAP2+: dmtimer: cleanup fclk usage
  ARM: OMAP2+: Fix mismerge for omap_hwmod_get_main_clk() API
  ARM: OMAP2+: Remove unnecessary ifdef around __omap2_set_globals
  ARM: OMAP2+: am33xx: Change cpu_is_am33xx to soc_is_am33xx
  ARM: OMAP2+: am33xx: Make am33xx as a separate class
  ARM: OMAP2+: Move omap3 dpll ops to dpll3xxx.c
  ARM: OMAP2+: All OMAP2PLUS uses omap-device.o target so add one entry
  ARM: OMAP: dmtimer: use devm_ API and do some cleanup in probe()
  ARM: OMAP2+: hwmod code: add support to set dmadisable in hwmod framework
  ARM: OMAP2+: PRM/CM: Move the stubbed prm and cm functions to prcm.c file and make them __weak
  ARM: OMAP2+: hwmod: add omap_hwmod_get_main_clk() API
  ARM: OMAP3+: dpll: optimize noncore dpll locking logic
  ARM: OMAP3: control: add definition for CONTROL_CAMERA_PHY_CTRL
  ARM: OMAP2+: powerdomain code: Fix Wake-up power domain power status
  ARM: OMAP4: clockdomain/CM code: Update supported transition modes
  ARM: OMAP3/4: omap_hwmod: Add rstst_offs field to struct omap_hwmod_omap4_prcm
  ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx

arch/arm/mach-omap2/Kconfig

@@ -21,12 +21,16 @@ config ARCH_OMAP2PLUS_TYPICAL
 	help
 	  Compile a kernel suitable for booting most boards
 
+config SOC_HAS_OMAP2_SDRC
+	bool "OMAP2 SDRAM Controller support"
+
 config ARCH_OMAP2
 	bool "TI OMAP2"
 	depends on ARCH_OMAP2PLUS
 	default y
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
+	select SOC_HAS_OMAP2_SDRC
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
@@ -39,6 +43,7 @@ config ARCH_OMAP3
 	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM
 	select MULTI_IRQ_HANDLER
+	select SOC_HAS_OMAP2_SDRC
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
@@ -66,16 +71,19 @@ config SOC_OMAP2420
 	depends on ARCH_OMAP2
 	default y
 	select OMAP_DM_TIMER
+	select SOC_HAS_OMAP2_SDRC
 
 config SOC_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
 	default y
+	select SOC_HAS_OMAP2_SDRC
 
 config SOC_OMAP3430
 	bool "OMAP3430 support"
 	depends on ARCH_OMAP3
 	default y
+	select SOC_HAS_OMAP2_SDRC
 
 config SOC_TI81XX
 	bool "TI81XX support"
@@ -84,8 +92,10 @@ config SOC_TI81XX
 
 config SOC_AM33XX
 	bool "AM33XX support"
-	depends on ARCH_OMAP3
 	default y
+	select CPU_V7
+	select ARM_CPU_SUSPEND if PM
+	select MULTI_IRQ_HANDLER
 
 config OMAP_PACKAGE_ZAF
        bool

arch/arm/mach-omap2/Makefile

@@ -6,7 +6,7 @@
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o
 hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o
 clock-common				= clock.o clock_common_data.o \
@@ -16,12 +16,14 @@ secure-common				= omap-smc.o omap-secure.o
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
 endif
 
 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # SMP support ONLY available for OMAP4
 
@@ -103,6 +105,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= voltagedomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= voltagedomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(voltagedomain-common)
 obj-$(CONFIG_SOC_AM33XX)                += voltagedomains33xx_data.o
 
 # OMAP powerdomain framework
@@ -118,6 +121,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= powerdomain44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomain33xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
 
@@ -135,6 +139,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomain33xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
 
@@ -154,6 +159,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o clock3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o

arch/arm/mach-omap2/clock.c

@@ -398,24 +398,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	return omap2_clksel_set_parent(clk, new_parent);
 }
 
-/* OMAP3/4 non-CORE DPLL clkops */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-
-const struct clkops clkops_omap3_noncore_dpll_ops = {
-	.enable		= omap3_noncore_dpll_enable,
-	.disable	= omap3_noncore_dpll_disable,
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
-
-const struct clkops clkops_omap3_core_dpll_ops = {
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
-
-#endif
-
 /*
  * OMAP2+ clock reset and init functions
  */

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3495,7 +3495,7 @@ int __init omap3xxx_clk_init(void)
 	} else if (cpu_is_ti816x()) {
 		cpu_mask = RATE_IN_TI816X;
 		cpu_clkflg = CK_TI816X;
-	} else if (cpu_is_am33xx()) {
+	} else if (soc_is_am33xx()) {
 		cpu_mask = RATE_IN_AM33XX;
 	} else if (cpu_is_ti814x()) {
 		cpu_mask = RATE_IN_TI814X;

arch/arm/mach-omap2/clock44xx_data.c

@@ -3299,17 +3299,17 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"smartreflex_core_fck",		&smartreflex_core_fck,	CK_443X),
 	CLK(NULL,	"smartreflex_iva_fck",		&smartreflex_iva_fck,	CK_443X),
 	CLK(NULL,	"smartreflex_mpu_fck",		&smartreflex_mpu_fck,	CK_443X),
-	CLK(NULL,	"gpt1_fck",			&timer1_fck,	CK_443X),
-	CLK(NULL,	"gpt10_fck",			&timer10_fck,	CK_443X),
-	CLK(NULL,	"gpt11_fck",			&timer11_fck,	CK_443X),
-	CLK(NULL,	"gpt2_fck",			&timer2_fck,	CK_443X),
-	CLK(NULL,	"gpt3_fck",			&timer3_fck,	CK_443X),
-	CLK(NULL,	"gpt4_fck",			&timer4_fck,	CK_443X),
-	CLK(NULL,	"gpt5_fck",			&timer5_fck,	CK_443X),
-	CLK(NULL,	"gpt6_fck",			&timer6_fck,	CK_443X),
-	CLK(NULL,	"gpt7_fck",			&timer7_fck,	CK_443X),
-	CLK(NULL,	"gpt8_fck",			&timer8_fck,	CK_443X),
-	CLK(NULL,	"gpt9_fck",			&timer9_fck,	CK_443X),
+	CLK(NULL,	"timer1_fck",			&timer1_fck,	CK_443X),
+	CLK(NULL,	"timer10_fck",			&timer10_fck,	CK_443X),
+	CLK(NULL,	"timer11_fck",			&timer11_fck,	CK_443X),
+	CLK(NULL,	"timer2_fck",			&timer2_fck,	CK_443X),
+	CLK(NULL,	"timer3_fck",			&timer3_fck,	CK_443X),
+	CLK(NULL,	"timer4_fck",			&timer4_fck,	CK_443X),
+	CLK(NULL,	"timer5_fck",			&timer5_fck,	CK_443X),
+	CLK(NULL,	"timer6_fck",			&timer6_fck,	CK_443X),
+	CLK(NULL,	"timer7_fck",			&timer7_fck,	CK_443X),
+	CLK(NULL,	"timer8_fck",			&timer8_fck,	CK_443X),
+	CLK(NULL,	"timer9_fck",			&timer9_fck,	CK_443X),
 	CLK(NULL,	"uart1_fck",			&uart1_fck,	CK_443X),
 	CLK(NULL,	"uart2_fck",			&uart2_fck,	CK_443X),
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),

arch/arm/mach-omap2/clockdomain44xx.c

@@ -70,7 +70,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
 
 static int omap4_clkdm_sleep(struct clockdomain *clkdm)
 {
-	omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
+	omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
 					clkdm->cm_inst, clkdm->clkdm_offs);
 	return 0;
 }
@@ -90,8 +90,12 @@ static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
 
 static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
 {
-	omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		omap4_clkdm_wakeup(clkdm);
+	else
+		omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+						 clkdm->cm_inst,
+						 clkdm->clkdm_offs);
 }
 
 static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)

arch/arm/mach-omap2/cminst44xx.c

@@ -234,20 +234,6 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
 }
 
-/**
- * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle
- * No return value.
- */
-void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs)
-{
-	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
-}
-
 /**
  * omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
  * @part: PRCM partition ID that the clockdomain registers exist in

arch/arm/mach-omap2/cminst44xx.h

@@ -16,38 +16,13 @@ extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
-
 extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-
-# ifdef CONFIG_ARCH_OMAP4
 extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
 					 u16 clkctrl_offs);
-
 extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
 				       u16 clkctrl_offs);
 extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
 					u16 clkctrl_offs);
-
-# else
-
-static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-	return 0;
-}
-
-static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
-				s16 cdoffs, u16 clkctrl_offs)
-{
-}
-
-static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-				 u16 clkctrl_offs)
-{
-}
-
-# endif
-
 /*
  * In an ideal world, we would not export these low-level functions,
  * but this will probably take some time to fix properly

arch/arm/mach-omap2/common.c

@@ -29,8 +29,6 @@
 
 /* Global address base setup code */
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
 static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 {
 	omap2_set_globals_tap(omap2_globals);
@@ -39,8 +37,6 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 	omap2_set_globals_prcm(omap2_globals);
 }
 
-#endif
-
 #if defined(CONFIG_SOC_OMAP2420)
 
 static struct omap_globals omap242x_globals = {
@@ -134,7 +130,9 @@ void __init ti81xx_map_io(void)
 {
 	omapti81xx_map_common_io();
 }
+#endif
 
+#if defined(CONFIG_SOC_AM33XX)
 #define AM33XX_TAP_BASE		(AM33XX_CTRL_BASE + \
 				TI81XX_CONTROL_DEVICE_ID - 0x204)
 
@@ -171,9 +169,7 @@ static struct omap_globals omap4_globals = {
 
 void __init omap2_set_globals_443x(void)
 {
-	omap2_set_globals_tap(&omap4_globals);
-	omap2_set_globals_control(&omap4_globals);
-	omap2_set_globals_prcm(&omap4_globals);
+	__omap2_set_globals(&omap4_globals);
 }
 
 void __init omap4_map_io(void)

arch/arm/mach-omap2/common.h

@@ -174,7 +174,12 @@ void omap2_set_globals_am33xx(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
+#if defined(CONFIG_SOC_HAS_OMAP2_SDRC)
 void omap2_set_globals_sdrc(struct omap_globals *);
+#else
+static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
+{ }
+#endif
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
 

arch/arm/mach-omap2/control.h

@@ -188,6 +188,7 @@
 #define OMAP3630_CONTROL_FUSE_OPP120_VDD1       (OMAP2_CONTROL_GENERAL + 0x0120)
 #define OMAP3630_CONTROL_FUSE_OPP50_VDD2        (OMAP2_CONTROL_GENERAL + 0x0128)
 #define OMAP3630_CONTROL_FUSE_OPP100_VDD2       (OMAP2_CONTROL_GENERAL + 0x012C)
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL	(OMAP2_CONTROL_GENERAL + 0x02f0)
 
 /* OMAP44xx control efuse offsets */
 #define OMAP44XX_CONTROL_FUSE_IVA_OPP50		0x22C

arch/arm/mach-omap2/dpll3xxx.c

@@ -135,11 +135,20 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
  */
 static int _omap3_noncore_dpll_lock(struct clk *clk)
 {
+	const struct dpll_data *dd;
 	u8 ai;
-	int r;
+	u8 state = 1;
+	int r = 0;
 
 	pr_debug("clock: locking DPLL %s\n", clk->name);
 
+	dd = clk->dpll_data;
+	state <<= __ffs(dd->idlest_mask);
+
+	/* Check if already locked */
+	if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
+		goto done;
+
 	ai = omap3_dpll_autoidle_read(clk);
 
 	if (ai)
@@ -152,6 +161,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 	if (ai)
 		omap3_dpll_allow_idle(clk);
 
+done:
 	return r;
 }
 
@@ -628,3 +638,17 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 		rate = clk->parent->rate * 2;
 	return rate;
 }
+
+/* OMAP3/4 non-CORE DPLL clkops */
+
+const struct clkops clkops_omap3_noncore_dpll_ops = {
+	.enable		= omap3_noncore_dpll_enable,
+	.disable	= omap3_noncore_dpll_disable,
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};
+
+const struct clkops clkops_omap3_core_dpll_ops = {
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};

arch/arm/mach-omap2/id.c

@@ -44,7 +44,7 @@ int omap_type(void)
 
 	if (cpu_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-	} else if (cpu_is_am33xx()) {
+	} else if (soc_is_am33xx()) {
 		val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
 	} else if (cpu_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
@@ -189,7 +189,7 @@ static void __init omap3_cpuinfo(void)
 		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
 	} else if (cpu_is_ti816x()) {
 		cpu_name = "TI816X";
-	} else if (cpu_is_am335x()) {
+	} else if (soc_is_am335x()) {
 		cpu_name =  "AM335X";
 	} else if (cpu_is_ti814x()) {
 		cpu_name = "TI814X";

arch/arm/mach-omap2/omap_hwmod.c

@@ -415,6 +415,49 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
+/**
+ * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
+ * @oh: struct omap_hwmod *
+ *
+ * The DMADISABLE bit is a semi-automatic bit present in sysconfig register
+ * of some modules. When the DMA must perform read/write accesses, the
+ * DMADISABLE bit is cleared by the hardware. But when the DMA must stop
+ * for power management, software must set the DMADISABLE bit back to 1.
+ *
+ * Set the DMADISABLE bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_dmadisable(struct omap_hwmod *oh)
+{
+	u32 v;
+	u32 dmadisable_mask;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE))
+		return -EINVAL;
+
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+		return -EINVAL;
+	}
+
+	/* clocks must be on for this operation */
+	if (oh->_state != _HWMOD_STATE_ENABLED) {
+		pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name);
+
+	v = oh->_sysc_cache;
+	dmadisable_mask =
+		(0x1 << oh->class->sysc->sysc_fields->dmadisable_shift);
+	v |= dmadisable_mask;
+	_write_sysconfig(v, oh);
+
+	return 0;
+}
+
 /**
  * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
  * @oh: struct omap_hwmod *
@@ -1668,11 +1711,17 @@ static int _ocp_softreset(struct omap_hwmod *oh)
  * therefore have no OCP header registers to access.  Others (like the
  * IVA) have idiosyncratic reset sequences.  So for these relatively
  * rare cases, custom reset code can be supplied in the struct
- * omap_hwmod_class .reset function pointer.  Passes along the return
- * value from either _ocp_softreset() or the custom reset function -
- * these must return -EINVAL if the hwmod cannot be reset this way or
- * if the hwmod is in the wrong state, -ETIMEDOUT if the module did
- * not reset in time, or 0 upon success.
+ * omap_hwmod_class .reset function pointer.
+ *
+ * _set_dmadisable() is called to set the DMADISABLE bit so that it
+ * does not prevent idling of the system. This is necessary for cases
+ * where ROMCODE/BOOTLOADER uses dma and transfers control to the
+ * kernel without disabling dma.
+ *
+ * Passes along the return value from either _ocp_softreset() or the
+ * custom reset function - these must return -EINVAL if the hwmod
+ * cannot be reset this way or if the hwmod is in the wrong state,
+ * -ETIMEDOUT if the module did not reset in time, or 0 upon success.
  */
 static int _reset(struct omap_hwmod *oh)
 {
@@ -1694,6 +1743,8 @@ static int _reset(struct omap_hwmod *oh)
 		}
 	}
 
+	_set_dmadisable(oh);
+
 	/*
 	 * OCP_SYSCONFIG bits need to be reprogrammed after a
 	 * softreset.  The _enable() function should be split to avoid
@@ -3598,3 +3649,18 @@ void __init omap_hwmod_init(void)
 
 	inited = true;
 }
+
+/**
+ * omap_hwmod_get_main_clk - get pointer to main clock name
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the main clock name assocated with @oh upon success,
+ * or NULL if @oh is NULL.
+ */
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return NULL;
+
+	return oh->main_clk;
+}

arch/arm/mach-omap2/omap_hwmod_common_data.c

@@ -47,6 +47,16 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
 	.midle_shift	= SYSC_TYPE2_MIDLEMODE_SHIFT,
 	.sidle_shift	= SYSC_TYPE2_SIDLEMODE_SHIFT,
 	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
+	.dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT,
+};
+
+/**
+ * struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme.
+ * Used by some IPs on AM33xx
+ */
+struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3 = {
+	.midle_shift	= SYSC_TYPE3_MIDLEMODE_SHIFT,
+	.sidle_shift	= SYSC_TYPE3_SIDLEMODE_SHIFT,
 };
 
 struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {

arch/arm/mach-omap2/powerdomain.c

@@ -526,7 +526,8 @@ int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
  *
  * Return the powerdomain @pwrdm's current power state.	Returns -EINVAL
  * if the powerdomain pointer is null or returns the current power state
- * upon success.
+ * upon success. Note that if the power domain only supports the ON state
+ * then just return ON as the current state.
  */
 int pwrdm_read_pwrst(struct powerdomain *pwrdm)
 {
@@ -535,6 +536,9 @@ int pwrdm_read_pwrst(struct powerdomain *pwrdm)
 	if (!pwrdm)
 		return -EINVAL;
 
+	if (pwrdm->pwrsts == PWRSTS_ON)
+		return PWRDM_POWER_ON;
+
 	if (arch_pwrdm && arch_pwrdm->pwrdm_read_pwrst)
 		ret = arch_pwrdm->pwrdm_read_pwrst(pwrdm);
 

arch/arm/mach-omap2/prcm.c

@@ -35,6 +35,7 @@
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"
 #include "prminst44xx.h"
+#include "cminst44xx.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
@@ -164,3 +165,25 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 		omap_cm_base_init();
 	}
 }
+
+/*
+ * Stubbed functions so that common files continue to build when
+ * custom builds are used
+ * XXX These are temporary and should be removed at the earliest possible
+ * opportunity
+ */
+int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
+					u16 clkctrl_offs)
+{
+	return 0;
+}
+
+void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+				s16 cdoffs, u16 clkctrl_offs)
+{
+}
+
+void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+				 u16 clkctrl_offs)
+{
+}

arch/arm/mach-omap2/prm2xxx_3xxx.h

@@ -228,68 +228,6 @@
 
 
 #ifndef __ASSEMBLER__
-/*
- * Stub omap2xxx/omap3xxx functions so that common files
- * continue to build when custom builds are used
- */
-#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) ||	\
-					defined(CONFIG_ARCH_OMAP3))
-static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-}
-static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
-		s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
-						u8 st_shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-#else
 /* Power/reset management domain register get/set */
 extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
 extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
@@ -320,9 +258,6 @@ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
 extern void omap3xxx_prm_ocp_barrier(void);
 extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
 extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-
-#endif	/* CONFIG_ARCH_OMAP4 */
-
 #endif
 
 /*

arch/arm/mach-omap2/prm_common.c

@@ -319,3 +319,65 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 	omap_prcm_irq_cleanup();
 	return -ENOMEM;
 }
+
+/*
+ * Stubbed functions so that common files continue to build when
+ * custom builds are used
+ * XXX These are temporary and should be removed at the earliest possible
+ * opportunity
+ */
+u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+}
+
+u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
+		s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
+						u8 st_shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+

arch/arm/mach-omap2/timer.c

@@ -168,8 +168,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 		return -ENXIO;
 
 	/* After the dmtimer is using hwmod these clocks won't be needed */
-	sprintf(name, "gpt%d_fck", gptimer_id);
-	timer->fclk = clk_get(NULL, name);
+	timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
 	if (IS_ERR(timer->fclk))
 		return -ENODEV;
 

arch/arm/plat-omap/Makefile

@@ -10,9 +10,7 @@ obj-n :=
 obj-  :=
 
 # omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
 
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o

arch/arm/plat-omap/dmtimer.c

@@ -37,7 +37,7 @@
 
 #include <linux/module.h>
 #include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 
@@ -689,49 +689,39 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
  */
 static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 {
-	int ret;
 	unsigned long flags;
 	struct omap_dm_timer *timer;
-	struct resource *mem, *irq, *ioarea;
+	struct resource *mem, *irq;
+	struct device *dev = &pdev->dev;
 	struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
 
 	if (!pdata) {
-		dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
+		dev_err(dev, "%s: no platform data.\n", __func__);
 		return -ENODEV;
 	}
 
 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (unlikely(!irq)) {
-		dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+		dev_err(dev, "%s: no IRQ resource.\n", __func__);
 		return -ENODEV;
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (unlikely(!mem)) {
-		dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+		dev_err(dev, "%s: no memory resource.\n", __func__);
 		return -ENODEV;
 	}
 
-	ioarea = request_mem_region(mem->start, resource_size(mem),
-			pdev->name);
-	if (!ioarea) {
-		dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
-		return -EBUSY;
-	}
-
-	timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+	timer = devm_kzalloc(dev, sizeof(struct omap_dm_timer), GFP_KERNEL);
 	if (!timer) {
-		dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
-			__func__);
-		ret = -ENOMEM;
-		goto err_free_ioregion;
+		dev_err(dev, "%s: memory alloc failed!\n", __func__);
+		return  -ENOMEM;
 	}
 
-	timer->io_base = ioremap(mem->start, resource_size(mem));
+	timer->io_base = devm_request_and_ioremap(dev, mem);
 	if (!timer->io_base) {
-		dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
-		ret = -ENOMEM;
-		goto err_free_mem;
+		dev_err(dev, "%s: region already claimed.\n", __func__);
+		return -ENOMEM;
 	}
 
 	timer->id = pdev->id;
@@ -742,14 +732,14 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 
 	/* Skip pm_runtime_enable for OMAP1 */
 	if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
-		pm_runtime_enable(&pdev->dev);
-		pm_runtime_irq_safe(&pdev->dev);
+		pm_runtime_enable(dev);
+		pm_runtime_irq_safe(dev);
 	}
 
 	if (!timer->reserved) {
-		pm_runtime_get_sync(&pdev->dev);
+		pm_runtime_get_sync(dev);
 		__omap_dm_timer_init_regs(timer);
-		pm_runtime_put(&pdev->dev);
+		pm_runtime_put(dev);
 	}
 
 	/* add the timer element to the list */
@@ -757,17 +747,9 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 	list_add_tail(&timer->node, &omap_timer_list);
 	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
-	dev_dbg(&pdev->dev, "Device Probed.\n");
+	dev_dbg(dev, "Device Probed.\n");
 
 	return 0;
-
-err_free_mem:
-	kfree(timer);
-
-err_free_ioregion:
-	release_mem_region(mem->start, resource_size(mem));
-
-	return ret;
 }
 
 /**
@@ -788,7 +770,6 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
 	list_for_each_entry(timer, &omap_timer_list, node)
 		if (timer->pdev->id == pdev->id) {
 			list_del(&timer->node);
-			kfree(timer);
 			ret = 0;
 			break;
 		}

arch/arm/plat-omap/include/plat/cpu.h

@@ -150,8 +150,8 @@ IS_AM_SUBCLASS(335x, 0x335)
 #define cpu_is_ti816x()			0
 #define cpu_is_ti814x()			0
 #define soc_is_am35xx()			0
-#define cpu_is_am33xx()			0
-#define cpu_is_am335x()			0
+#define soc_is_am33xx()			0
+#define soc_is_am335x()			0
 #define cpu_is_omap44xx()		0
 #define cpu_is_omap443x()		0
 #define cpu_is_omap446x()		0
@@ -328,8 +328,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 # undef cpu_is_ti816x
 # undef cpu_is_ti814x
 # undef soc_is_am35xx
-# undef cpu_is_am33xx
-# undef cpu_is_am335x
 # define cpu_is_omap3430()		is_omap3430()
 # undef cpu_is_omap3630
 # define cpu_is_omap3630()		is_omap363x()
@@ -337,8 +335,13 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_ti816x()		is_ti816x()
 # define cpu_is_ti814x()		is_ti814x()
 # define soc_is_am35xx()		is_am35xx()
-# define cpu_is_am33xx()		is_am33xx()
-# define cpu_is_am335x()		is_am335x()
+#endif
+
+# if defined(CONFIG_SOC_AM33XX)
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx()		is_am33xx()
+# define soc_is_am335x()		is_am335x()
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
@@ -392,7 +395,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define AM35XX_REV_ES1_0	AM35XX_CLASS
 #define AM35XX_REV_ES1_1	(AM35XX_CLASS | (0x1 << 8))
 
-#define AM335X_CLASS		0x33500034
+#define AM335X_CLASS		0x33500033
 #define AM335X_REV_ES1_0	AM335X_CLASS
 
 #define OMAP443X_CLASS		0x44300044

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -41,6 +41,7 @@ struct omap_device;
 
 extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
 extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
 
 /*
  * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
@@ -69,6 +70,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
 #define SYSC_TYPE2_SIDLEMODE_MASK	(0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
 #define SYSC_TYPE2_MIDLEMODE_SHIFT	4
 #define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
+#define SYSC_TYPE2_DMADISABLE_SHIFT	16
+#define SYSC_TYPE2_DMADISABLE_MASK	(0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE3.
+ * This is applicable for some IPs present in AM33XX
+ */
+#define SYSC_TYPE3_SIDLEMODE_SHIFT	0
+#define SYSC_TYPE3_SIDLEMODE_MASK	(0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
+#define SYSC_TYPE3_MIDLEMODE_SHIFT	2
+#define SYSC_TYPE3_MIDLEMODE_MASK	(0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
 
 /* OCP SYSSTATUS bit shifts/masks */
 #define SYSS_RESETDONE_SHIFT		0
@@ -283,6 +295,7 @@ struct omap_hwmod_ocp_if {
 #define SYSS_HAS_RESET_STATUS	(1 << 7)
 #define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
 #define SYSC_HAS_RESET_STATUS	(1 << 9)
+#define SYSC_HAS_DMADISABLE	(1 << 10)
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH	0x0
@@ -298,6 +311,7 @@ struct omap_hwmod_ocp_if {
  * @enwkup_shift: Offset of the enawakeup bit
  * @srst_shift: Offset of the softreset bit
  * @autoidle_shift: Offset of the autoidle bit
+ * @dmadisable_shift: Offset of the dmadisable bit
  */
 struct omap_hwmod_sysc_fields {
 	u8 midle_shift;
@@ -306,6 +320,7 @@ struct omap_hwmod_sysc_fields {
 	u8 enwkup_shift;
 	u8 srst_shift;
 	u8 autoidle_shift;
+	u8 dmadisable_shift;
 };
 
 /**
@@ -374,11 +389,13 @@ struct omap_hwmod_omap2_prcm {
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
  * @clkctrl_reg: PRCM address of the clock control register
  * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
+ * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
 	u16		clkctrl_offs;
 	u16		rstctrl_offs;
+	u16		rstst_offs;
 	u16		context_offs;
 	u8		submodule_wkdep_bit;
 	u8		modulemode;
@@ -631,6 +648,8 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
 
 extern void __init omap_hwmod_init(void);
 
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
+
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out

arch/arm/plat-omap/include/plat/sdrc.h

@@ -123,7 +123,7 @@ struct omap_sdrc_params {
 	u32 mr;
 };
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
 void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 			    struct omap_sdrc_params *sdrc_cs1);
 #else

arch/arm/plat-omap/sram.c

@@ -85,7 +85,7 @@ static int is_sram_locked(void)
 			__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
 			__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
 		}
-		if (cpu_is_omap34xx() && !cpu_is_am33xx()) {
+		if (cpu_is_omap34xx()) {
 			__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
 			__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
 			__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
@@ -123,7 +123,7 @@ static void __init omap_detect_sram(void)
 				omap_sram_size = 0x800; /* 2K */
 			}
 		} else {
-			if (cpu_is_am33xx()) {
+			if (soc_is_am33xx()) {
 				omap_sram_start = AM33XX_SRAM_PA;
 				omap_sram_size = 0x10000; /* 64K */
 			} else if (cpu_is_omap34xx()) {
@@ -386,7 +386,7 @@ int __init omap_sram_init(void)
 		omap242x_sram_init();
 	else if (cpu_is_omap2430())
 		omap243x_sram_init();
-	else if (cpu_is_am33xx())
+	else if (soc_is_am33xx())
 		am33xx_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();