V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/bt8xx/bttv-cards.c

@@ -4209,7 +4209,7 @@ static int tea5757_read(struct bttv *btv)
 	bus_low(btv,btv->mbox_clk);
 
 	udelay(10);
-	timeout= jiffies + HZ;
+	timeout= jiffies + msecs_to_jiffies(1000);
 
 	/* wait for DATA line to go low; error if it doesn't */
 	while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))

drivers/media/video/bt8xx/bttv-input.c

@@ -153,7 +153,7 @@ static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
 {
 	if (ir->polling) {
 		setup_timer(&ir->timer, bttv_input_timer, (unsigned long)btv);
-		ir->timer.expires  = jiffies + HZ;
+		ir->timer.expires  = jiffies + msecs_to_jiffies(1000);
 		add_timer(&ir->timer);
 	} else if (ir->rc5_gpio) {
 		/* set timer_end for code completion */

drivers/media/video/bt8xx/bttvp.h

@@ -284,8 +284,8 @@ extern int fini_bttv_i2c(struct bttv *btv);
 #define d2printk if (bttv_debug >= 2) printk
 
 #define BTTV_MAX_FBUF   0x208000
-#define BTTV_TIMEOUT    (HZ/2) /* 0.5 seconds */
-#define BTTV_FREE_IDLE  (HZ)   /* one second */
+#define BTTV_TIMEOUT    msecs_to_jiffies(500)    /* 0.5 seconds */
+#define BTTV_FREE_IDLE  msecs_to_jiffies(1000)   /* one second */
 
 
 struct bttv_pll_info {

drivers/media/video/cx88/cx88.h

@@ -259,7 +259,7 @@ struct cx88_subid {
 #define RESOURCE_VIDEO         2
 #define RESOURCE_VBI           4
 
-#define BUFFER_TIMEOUT     (HZ/2)  /* 0.5 seconds */
+#define BUFFER_TIMEOUT     msecs_to_jiffies(500)  /* 0.5 seconds */
 
 /* buffer for one video frame */
 struct cx88_buffer {

drivers/media/video/saa7134/saa7134.h

@@ -314,7 +314,7 @@ struct saa7134_board {
 #define INTERLACE_ON           1
 #define INTERLACE_OFF          2
 
-#define BUFFER_TIMEOUT     (HZ/2)  /* 0.5 seconds */
+#define BUFFER_TIMEOUT     msecs_to_jiffies(500)  /* 0.5 seconds */
 
 struct saa7134_dev;
 struct saa7134_dma;