Commit fe6af6fa authored by Paul Mackerras's avatar Paul Mackerras

Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc

parents ec2f9d13 8f68abbf
......@@ -1334,6 +1334,9 @@ platforms are moved over to use the flattened-device-tree model.
fsl-usb2-mph compatible controllers. Either this property or
"port0" (or both) must be defined for "fsl-usb2-mph" compatible
controllers.
- dr_mode : indicates the working mode for "fsl-usb2-dr" compatible
controllers. Can be "host", "peripheral", or "otg". Default to
"host" if not defined for backward compatibility.
Recommended properties :
- interrupts : <a b> where a is the interrupt number and b is a
......@@ -1367,6 +1370,7 @@ platforms are moved over to use the flattened-device-tree model.
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 1>;
dr_mode = "otg";
phy = "ulpi";
};
......
/*
* Device Tree Souce for Buffalo KuroboxHD
*
* Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use
* the default configuration linkstation_defconfig.
*
* Based on sandpoint.dts
*
* 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
XXXX add flash parts, rtc, ??
build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
*/
/ {
linux,phandle = <1000>;
model = "KuroboxHD";
compatible = "linkstation";
#address-cells = <1>;
#size-cells = <1>;
cpus {
linux,phandle = <2000>;
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,603e { /* Really 8241 */
linux,phandle = <2100>;
linux,boot-cpu;
device_type = "cpu";
reg = <0>;
clock-frequency = <bebc200>; /* Fixed by bootwrapper */
timebase-frequency = <1743000>; /* Fixed by bootwrapper */
bus-frequency = <0>; /* From bootloader */
/* Following required by dtc but not used */
i-cache-line-size = <0>;
d-cache-line-size = <0>;
i-cache-size = <4000>;
d-cache-size = <4000>;
};
};
memory {
linux,phandle = <3000>;
device_type = "memory";
reg = <00000000 04000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
linux,phandle = <4000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
compatible = "mpc10x";
store-gathering = <0>; /* 0 == off, !0 == on */
reg = <80000000 00100000>;
ranges = <80000000 80000000 70000000 /* pci mem space */
fc000000 fc000000 00100000 /* EUMB */
fe000000 fe000000 00c00000 /* pci i/o space */
fec00000 fec00000 00300000 /* pci cfg regs */
fef00000 fef00000 00100000>; /* pci iack */
i2c@80003000 {
linux,phandle = <4300>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <80003000 1000>;
interrupts = <5 2>;
interrupt-parent = <4400>;
};
serial@80004500 {
linux,phandle = <4511>;
device_type = "serial";
compatible = "ns16550";
reg = <80004500 8>;
clock-frequency = <5d08d88>;
current-speed = <2580>;
interrupts = <9 2>;
interrupt-parent = <4400>;
};
serial@80004600 {
linux,phandle = <4512>;
device_type = "serial";
compatible = "ns16550";
reg = <80004600 8>;
clock-frequency = <5d08d88>;
current-speed = <e100>;
interrupts = <a 0>;
interrupt-parent = <4400>;
};
pic@80040000 {
linux,phandle = <4400>;
#interrupt-cells = <2>;
#address-cells = <0>;
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
reg = <80040000 40000>;
built-in;
};
pci@fec00000 {
linux,phandle = <4500>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "mpc10x-pci";
reg = <fec00000 400000>;
ranges = <01000000 0 0 fe000000 0 00c00000
02000000 0 80000000 80000000 0 70000000>;
bus-range = <0 ff>;
clock-frequency = <7f28155>;
interrupt-parent = <4400>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 - IRQ0 ETH */
5800 0 0 1 4400 0 1
5800 0 0 2 4400 1 1
5800 0 0 3 4400 2 1
5800 0 0 4 4400 3 1
/* IDSEL 0x12 - IRQ1 IDE0 */
6000 0 0 1 4400 1 1
6000 0 0 2 4400 2 1
6000 0 0 3 4400 3 1
6000 0 0 4 4400 0 1
/* IDSEL 0x14 - IRQ3 USB2.0 */
7000 0 0 1 4400 3 1
7000 0 0 2 4400 3 1
7000 0 0 3 4400 3 1
7000 0 0 4 4400 3 1
>;
};
};
};
/*
* MPC8313E RDB Device Tree Source
*
* Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MPC8313ERDB";
compatible = "MPC83xx";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8313@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <4000>; // L1, 16K
i-cache-size = <4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
32-bit;
};
};
memory {
device_type = "memory";
reg = <00000000 08000000>; // 128MB at 0
};
soc8313@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00000200>;
bus-frequency = <0>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <200 100>;
};
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = <700>;
dfsrr;
};
i2c@3100 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
interrupt-parent = <700>;
dfsrr;
};
spi@7000 {
device_type = "spi";
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
interrupt-parent = <700>;
mode = <0>;
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 2>;
phy_type = "utmi_wide";
};
mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <24520>;
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <700>;
interrupts = <13 2>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@4 {
linux,phandle = <2452004>;
interrupt-parent = <700>;
interrupts = <14 2>;
reg = <4>;
device_type = "ethernet-phy";
};
};
ethernet@24000 {
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <24000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <25 8 24 8 23 8>;
interrupt-parent = <700>;
phy-handle = <2452001>;
};
ethernet@25000 {
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <25000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <22 8 21 8 20 8>;
interrupt-parent = <700>;
phy-handle = <2452004>;
};
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
interrupt-parent = <700>;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
interrupt-parent = <700>;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0E -mini PCI */
7000 0 0 1 700 12 8
7000 0 0 2 700 12 8
7000 0 0 3 700 12 8
7000 0 0 4 700 12 8
/* IDSEL 0x0F - PCI slot */
7800 0 0 1 700 11 8
7800 0 0 2 700 12 8
7800 0 0 3 700 11 8
7800 0 0 4 700 12 8>;
interrupt-parent = <700>;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "83xx";
device_type = "pci";
};
crypto@30000 {
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
reg = <30000 7000>;
interrupts = <b 8>;
interrupt-parent = <700>;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <18>;
exec-units-mask = <0000004c>;
descriptor-types-mask = <0122003f>;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
pic@700 {
linux,phandle = <700>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <700 100>;
built-in;
device_type = "ipic";
};
};
};
......@@ -39,6 +39,11 @@ memory {
reg = <00000000 10000000>; // 256MB at 0
};
bcsr@e2400000 {
device_type = "board-control";
reg = <e2400000 8000>;
};
soc8349@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
......@@ -103,6 +108,7 @@ usb@23000 {
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 2>;
dr_mode = "otg";
phy_type = "ulpi";
};
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Mon Jan 22 22:17:58 2007
# Linux kernel version: 2.6.20-rc6
# Sun Jan 28 23:13:56 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
......@@ -58,7 +58,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION="-kuroboxHG"
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
......@@ -206,7 +206,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
......@@ -312,39 +312,40 @@ CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
......@@ -359,12 +360,12 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
CONFIG_IP_NF_MATCH_RECENT=m
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_LOG is not set
......@@ -374,16 +375,17 @@ CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
......@@ -472,6 +474,7 @@ CONFIG_MTD_PARTITIONS=y
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
......@@ -518,6 +521,7 @@ CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xffc00000
CONFIG_MTD_PHYSMAP_LEN=0x400000
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PLATRAM is not set
#
......@@ -540,6 +544,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_NAND_CAFE is not set
#
# OneNAND Flash Device Drivers
......@@ -696,7 +701,7 @@ CONFIG_ATA=y
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_IT821X=y
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
......@@ -763,11 +768,33 @@ CONFIG_TUN=m
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
......@@ -829,7 +856,8 @@ CONFIG_NET_RADIO=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_ZD1211RW is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y
#
......@@ -1098,7 +1126,7 @@ CONFIG_DUMMY_CONSOLE=y
#
# HID Devices
#
CONFIG_HID=y
CONFIG_HID=m
#
# USB support
......@@ -1115,7 +1143,6 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
......@@ -1136,7 +1163,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
......@@ -1371,7 +1398,11 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
......@@ -1461,7 +1492,12 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
......@@ -1495,7 +1531,7 @@ CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
......@@ -1526,12 +1562,14 @@ CONFIG_NLS_UTF8=m
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
......
This diff is collapsed.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Fri Jan 26 00:19:27 2007
# Linux kernel version: 2.6.20
# Thu Feb 8 01:00:48 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
......@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_83xx=y
......@@ -128,8 +128,9 @@ CONFIG_PPC_GEN550=y
#
# Platform support
#
# CONFIG_MPC8313_RDB is not set
# CONFIG_MPC832x_MDS is not set
CONFIG_MPC834x_SYS=y
CONFIG_MPC834x_MDS=y
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC8360E_PB is not set
CONFIG_MPC834x=y
......
......@@ -295,7 +295,7 @@ void __init mapin_ram(void)
}
/* is x a power of 4? */
#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1))
#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)
/*
* Set up a mapping for a block of I/O.
......
......@@ -3,7 +3,13 @@ menu "Platform support"
choice
prompt "Machine Type"
default MPC834x_SYS
default MPC834x_MDS
config MPC8313_RDB
bool "Freescale MPC8313 RDB"
select DEFAULT_UIMAGE
help
This option enables support for the MPC8313 RDB board.
config MPC832x_MDS
bool "Freescale MPC832x MDS"
......@@ -12,13 +18,13 @@ config MPC832x_MDS
help
This option enables support for the MPC832x MDS evaluation board.
config MPC834x_SYS
bool "Freescale MPC834x SYS"
config MPC834x_MDS
bool "Freescale MPC834x MDS"
select DEFAULT_UIMAGE
help
This option enables support for the MPC 834x SYS evaluation board.
This option enables support for the MPC 834x MDS evaluation board.
Be aware that PCI buses can only function when SYS board is plugged
Be aware that PCI buses can only function when MDS board is plugged
into the PIB (Platform IO Board) board from Freescale which provide
3 PCI slots. The PIBs PCI initialization is the bootloader's
responsibility.
......@@ -41,6 +47,12 @@ config MPC8360E_PB
endchoice
config PPC_MPC831x
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
default y if MPC8313_RDB
config PPC_MPC832x
bool
select PPC_UDBG_16550
......@@ -51,7 +63,7 @@ config MPC834x
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
default y if MPC834x_SYS || MPC834x_ITX
default y if MPC834x_MDS || MPC834x_ITX
config PPC_MPC836x
bool
......
......@@ -3,7 +3,8 @@
#
obj-y := misc.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o
obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o
obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o
obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o
/*
* arch/powerpc/platforms/83xx/mpc8313_rdb.c
*
* Description: MPC8313x RDB board specific routines.
* This file is based on mpc834x_sys.c
* Author: Lo Wlison <r43300@freescale.com>
*
* Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/pci.h>
#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
#include "mpc83xx.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init mpc8313_rdb_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mpc8313_rdb_setup_arch()", 0);
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
ppc_md.pci_exclude_device = mpc83xx_exclude_device;
#endif
}
void __init mpc8313_rdb_init_IRQ(void)
{
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
if (!np)
return;
ipic_init(np, 0);
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
ipic_set_default_priority();
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc8313_rdb_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC8313ERDB"))
return 0;
DBG("MPC8313 RDB found\n");
return 1;
}
define_machine(mpc8313_rdb) {
.name = "MPC8313 RDB",
.probe = mpc8313_rdb_probe,
.setup_arch = mpc8313_rdb_setup_arch,
.init_IRQ = mpc8313_rdb_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
......@@ -38,8 +38,6 @@
#include "mpc83xx.h"
#include <platforms/83xx/mpc834x_sys.h>
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
......
/*
* arch/powerpc/platforms/83xx/mpc834x_sys.c
* arch/powerpc/platforms/83xx/mpc834x_mds.c
*
* MPC834x SYS board specific routines
* MPC834x MDS board specific routines
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
......@@ -43,17 +43,87 @@ unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
#define BCSR5_INT_USB 0x02
/* Note: This is only for PB, not for PB+PIB
* On PB only port0 is connected using ULPI */
static int mpc834x_usb_cfg(void)
{
unsigned long sccr, sicrl;
void __iomem *immap;
void __iomem *bcsr_regs = NULL;
u8 bcsr5;
struct device_node *np = NULL;
int port0_is_dr = 0;
if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL)
port0_is_dr = 1;
if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){
if (port0_is_dr) {
printk(KERN_WARNING
"There is only one USB port on PB board! \n");
return -1;
} else if (!port0_is_dr)
/* No usb port enabled */
return -1;
}
immap = ioremap(get_immrbase(), 0x1000);
if (!immap)
return -1;
/* Configure clock */
sccr = in_be32(immap + MPC83XX_SCCR_OFFS);
if (port0_is_dr)
sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
else
sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
/* Configure Pin */
sicrl = in_be32(immap + MPC83XX_SICRL_OFFS);
/* set port0 only */
if (port0_is_dr)
sicrl |= MPC83XX_SICRL_USB0;
else
sicrl &= ~(MPC83XX_SICRL_USB0);
out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
iounmap(immap);
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np != 0) {
struct resource res;
of_address_to_resource(np, 0, &res);
bcsr_regs = ioremap(res.start, res.end - res.start + 1);
of_node_put(np);
}
if (!bcsr_regs)
return -1;
/*
* if MDS board is plug into PIB board,
* force to use the PHY on MDS board
*/
bcsr5 = in_8(bcsr_regs + 5);
if (!(bcsr5 & BCSR5_INT_USB))
out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB));
iounmap(bcsr_regs);
return 0;
}
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init mpc834x_sys_setup_arch(void)
static void __init mpc834x_mds_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mpc834x_sys_setup_arch()", 0);
ppc_md.progress("mpc834x_mds_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != 0) {
......@@ -65,6 +135,7 @@ static void __init mpc834x_sys_setup_arch(void)
loops_per_jiffy = 50000000 / HZ;
of_node_put(np);
}
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
......@@ -72,6 +143,8 @@ static void __init mpc834x_sys_setup_arch(void)
ppc_md.pci_exclude_device = mpc83xx_exclude_device;
#endif
mpc834x_usb_cfg();
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
......@@ -79,7 +152,7 @@ static void __init mpc834x_sys_setup_arch(void)
#endif
}
static void __init mpc834x_sys_init_IRQ(void)
static void __init mpc834x_mds_init_IRQ(void)
{
struct device_node *np;
......@@ -119,7 +192,7 @@ late_initcall(mpc834x_rtc_hookup);
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init mpc834x_sys_probe(void)
static int __init mpc834x_mds_probe(void)
{
/* We always match for now, eventually we should look at the flat
dev tree to ensure this is the board we are suppose to run on
......@@ -127,11 +200,11 @@ static int __init mpc834x_sys_probe(void)
return 1;
}
define_machine(mpc834x_sys) {
.name = "MPC834x SYS",
.probe = mpc834x_sys_probe,
.setup_arch = mpc834x_sys_setup_arch,
.init_IRQ = mpc834x_sys_init_IRQ,
define_machine(mpc834x_mds) {
.name = "MPC834x MDS",
.probe = mpc834x_mds_probe,
.setup_arch = mpc834x_mds_setup_arch,
.init_IRQ = mpc834x_mds_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
......
/*
* arch/powerpc/platforms/83xx/mpc834x_sys.h
*
* MPC834X SYS common board definitions
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MACH_MPC83XX_SYS_H__
#define __MACH_MPC83XX_SYS_H__
#define PIRQA MPC83xx_IRQ_EXT4
#define PIRQB MPC83xx_IRQ_EXT5
#define PIRQC MPC83xx_IRQ_EXT6
#define PIRQD MPC83xx_IRQ_EXT7
#endif /* __MACH_MPC83XX_SYS_H__ */
......@@ -4,6 +4,24 @@
#include <linux/init.h>
#include <linux/device.h>
/* System Clock Control Register */
#define MPC83XX_SCCR_OFFS 0xA08
#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000
#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000
#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000
#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
/* system i/o configuration register low */
#define MPC83XX_SICRL_OFFS 0x114
#define MPC83XX_SICRL_USB0 0x40000000
#define MPC83XX_SICRL_USB1 0x20000000
/* system i/o configuration register high */
#define MPC83XX_SICRH_OFFS 0x118
#define MPC83XX_SICRH_USB_UTMI 0x00020000
/*
* Declaration for the various functions exported by the
* mpc83xx_* files. Mostly for use by mpc83xx_setup
......
......@@ -45,8 +45,7 @@ unsigned long isa_mem_base = 0;
#endif
#ifdef CONFIG_PCI
int
mpc85xx_exclude_device(u_char bus, u_char devfn)
static int mpc85xx_exclude_device(u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
......@@ -69,7 +68,7 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
#endif /* CONFIG_CPM2 */
void __init mpc85xx_ads_pic_init(void)
static void __init mpc85xx_ads_pic_init(void)
{
struct mpic *mpic;
struct resource r;
......@@ -254,7 +253,7 @@ static void __init mpc85xx_ads_setup_arch(void)
#endif
}
void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
{
uint pvid, svid, phid1;
uint memsize = total_memory;
......
......@@ -56,7 +56,6 @@ unsigned long isa_mem_base = 0;
static int cds_pci_slot = 2;
static volatile u8 *cadmus;
#ifdef CONFIG_PCI
#define ARCADIA_HOST_BRIDGE_IDSEL 17
......@@ -64,8 +63,7 @@ static volatile u8 *cadmus;
extern int mpc85xx_pci2_busno;
int
mpc85xx_exclude_device(u_char bus, u_char devfn)
static int mpc85xx_exclude_device(u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
......@@ -81,8 +79,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
return PCIBIOS_SUCCESSFUL;
}
void __init
mpc85xx_cds_pcibios_fixup(void)
static void __init mpc85xx_cds_pcibios_fixup(void)
{
struct pci_dev *dev;
u_char c;
......@@ -144,7 +141,7 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
#endif /* PPC_I8259 */
#endif /* CONFIG_PCI */
void __init mpc85xx_cds_pic_init(void)
static void __init mpc85xx_cds_pic_init(void)
{
struct mpic *mpic;
struct resource r;
......@@ -224,12 +221,10 @@ void __init mpc85xx_cds_pic_init(void)
#endif /* CONFIG_PPC_I8259 */
}
/*
* Setup the architecture
*/
static void __init
mpc85xx_cds_setup_arch(void)
static void __init mpc85xx_cds_setup_arch(void)
{
struct device_node *cpu;
#ifdef CONFIG_PCI
......@@ -276,9 +271,7 @@ mpc85xx_cds_setup_arch(void)
#endif
}
void
mpc85xx_cds_show_cpuinfo(struct seq_file *m)
static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
{
uint pvid, svid, phid1;
uint memsize = total_memory;
......
......@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/initrd.h>
#include <linux/root_dev.h>
#include <linux/mtd/physmap.h>
#include <asm/time.h>
......@@ -91,17 +90,6 @@ static void __init linkstation_setup_arch(void)
ARRAY_SIZE(linkstation_physmap_partitions));
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
/* Lookup PCI host bridges */
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
......
......@@ -441,7 +441,8 @@ static int __init fsl_usb_of_init(void)
{
struct device_node *np;
unsigned int i;
struct platform_device *usb_dev_mph = NULL, *usb_dev_dr = NULL;
struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
*usb_dev_dr_client = NULL;
int ret;
for (np = NULL, i = 0;
......@@ -507,33 +508,72 @@ static int __init fsl_usb_of_init(void)
of_irq_to_resource(np, 0, &r[1]);
usb_dev_dr =
platform_device_register_simple("fsl-ehci", i, r, 2);
if (IS_ERR(usb_dev_dr)) {
ret = PTR_ERR(usb_dev_dr);
prop = get_property(np, "dr_mode", NULL);
if (!prop || !strcmp(prop, "host")) {
usb_data.operating_mode = FSL_USB2_DR_HOST;
usb_dev_dr_host = platform_device_register_simple(
"fsl-ehci", i, r, 2);
if (IS_ERR(usb_dev_dr_host)) {
ret = PTR_ERR(usb_dev_dr_host);
goto err;
}
} else if (prop && !strcmp(prop, "peripheral")) {
usb_data.operating_mode = FSL_USB2_DR_DEVICE;
usb_dev_dr_client = platform_device_register_simple(
"fsl-usb2-udc", i, r, 2);
if (IS_ERR(usb_dev_dr_client)) {
ret = PTR_ERR(usb_dev_dr_client);
goto err;
}
} else if (prop && !strcmp(prop, "otg")) {
usb_data.operating_mode = FSL_USB2_DR_OTG;
usb_dev_dr_host = platform_device_register_simple(
"fsl-ehci", i, r, 2);
if (IS_ERR(usb_dev_dr_host)) {
ret = PTR_ERR(usb_dev_dr_host);
goto err;
}
usb_dev_dr_client = platform_device_register_simple(
"fsl-usb2-udc", i, r, 2);
if (IS_ERR(usb_dev_dr_client)) {
ret = PTR_ERR(usb_dev_dr_client);
goto err;
}
} else {
ret = -EINVAL;
goto err;
}
usb_dev_dr->dev.coherent_dma_mask = 0xffffffffUL;
usb_dev_dr->dev.dma_mask = &usb_dev_dr->dev.coherent_dma_mask;
usb_data.operating_mode = FSL_USB2_DR_HOST;
prop = get_property(np, "phy_type", NULL);
usb_data.phy_mode = determine_usb_phy(prop);
ret =
platform_device_add_data(usb_dev_dr, &usb_data,
sizeof(struct
fsl_usb2_platform_data));
if (ret)
goto unreg_dr;
if (usb_dev_dr_host) {
usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL;
usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host->
dev.coherent_dma_mask;
if ((ret = platform_device_add_data(usb_dev_dr_host,
&usb_data, sizeof(struct
fsl_usb2_platform_data))))
goto unreg_dr;
}
if (usb_dev_dr_client) {
usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL;
usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client->
dev.coherent_dma_mask;
if ((ret = platform_device_add_data(usb_dev_dr_client,
&usb_data, sizeof(struct
fsl_usb2_platform_data))))
goto unreg_dr;
}
}
return 0;
unreg_dr:
if (usb_dev_dr)
platform_device_unregister(usb_dev_dr);
if (usb_dev_dr_host)
platform_device_unregister(usb_dev_dr_host);
if (usb_dev_dr_client)
platform_device_unregister(usb_dev_dr_client);
unreg_mph:
if (usb_dev_mph)
platform_device_unregister(usb_dev_mph);
......@@ -699,7 +739,7 @@ static int __init fs_enet_of_init(void)
if (ret)
goto unreg;
}
of_node_put(phy);
of_node_put(mdio);
......
......@@ -179,7 +179,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
uccs->us_info = us_info;
uccs->saved_uccm = 0;
uccs->p_rx_frame = 0;
uccs->us_regs = us_info->us_regs;
uccs->us_regs = us_info->regs;
us_regs = uccs->us_regs;
uccs->p_ucce = (u16 *) & (us_regs->ucce);
uccs->p_uccm = (u16 *) & (us_regs->uccm);
......@@ -206,7 +206,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
/* Init Guemr register */
if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) {
if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) {
uccs_err("ucc_slow_init: Could not init the guemr register.");
ucc_slow_free(uccs);
return ret;
......@@ -214,7 +214,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Set UCC to slow type */
if ((ret = ucc_set_type(us_info->ucc_num,
(struct ucc_common *) (us_info->us_regs),
(struct ucc_common *) (us_info->regs),
UCC_SPEED_TYPE_SLOW))) {
uccs_err("ucc_slow_init: Could not init the guemr register.");
ucc_slow_free(uccs);
......
......@@ -271,7 +271,7 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
extern long *intercept_table;
EXPORT_SYMBOL(intercept_table);
#endif /* CONFIG_PPC_STD_MMU */
#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
#ifdef CONFIG_PPC_DCR_NATIVE
EXPORT_SYMBOL(__mtdcr);
EXPORT_SYMBOL(__mfdcr);
#endif
......@@ -314,7 +314,7 @@ void __init mapin_ram(void)
}
/* is x a power of 4? */
#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1))
#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)
/*
* Set up a mapping for a block of I/O.
......
......@@ -150,7 +150,7 @@ struct ucc_slow_info {
int ucc_num;
enum qe_clock rx_clock;
enum qe_clock tx_clock;
struct ucc_slow *us_regs;
struct ucc_slow *regs;
int irq;
u16 uccm_mask;
int data_mem_part;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment