Merge tag 'iio-for-4.6a' of...

Merge tag 'iio-for-4.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new IIO device support, features and cleanups for the 4.6 cycle.

Device Support
* ad5761
  - new driver
* at91_sama5d2 ADC.
  - new driver and MAINTAINERS entry.
  - minor cleanups followed.
* atlas pH-SM
  - new driver (this has possibly the prettiest data sheet I've ever seen)
* mcp3422
  - mcp3425 ADC added.
* mcp4725
  - mcp4726 DAC added.
* mma8452
  - mma8451q accelerometer added.
* mpl115
  - mpl115a1 added (a lot bigger than it seems as this is an SPI part whereas
    previous parts were i2c).
* si7005
  - Hoperf th02 (seems to be a repackaged part)
* si7020
  - Hoperf th06 (seems to be a repackaged part)

New features
* Core
  - IIO_PH type. Does what it says on the tin.
* max30100
  - LED current configuration support.
* mcp320x
  - more differential measurement combinations.
* mma8452
  - free fall deteciton
- opt3001
  - enable operation without a IRQ line.
  - device tree docs.  Somehow the original docs have disappeared down
    a rabbit hole, so here is a new set.
* st-sensors
  - Support active-low interrupts.

Cleanups and minor / not so minor reworks
* Documentation
  - drop some defunct ABI from the docs in staging.
* presure / Kconfig
  - white space cleanup.
* ad7150
  - BIT macro usage
  - Alignment fixes
* ad7192
  - false indent fixed.
* ak8975
  - constify the ak_def structures
* axp288
  - drop a redundant double const.
* dht11
  - substantial reliability improvements by being more tolerant
    of missing start bits.
  - simplify the decoding algorithm
* mma8452
  - whitespace cleanup
* mpl115
  - don't bother setting i2c_client_data as nothing uses it.
* mpu6050
  - drop unused function parameter.
* opt3001
  - extract integration time as constants.
  - trivial refactoring.

CREDITS

@@ -3054,6 +3054,7 @@ D: PLX USB338x driver
 D: PCA9634 driver
 D: Option GTM671WFS
 D: Fintek F81216A
+D: AD5761 iio driver
 D: Various kernel hacks
 S: Qtechnology A/S
 S: Valby Langgade 142

Documentation/ABI/testing/sysfs-bus-iio

@@ -497,7 +497,9 @@ Description:
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
 		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+		125kohm_to_gnd: connected to ground via an 125kOhm resistor,
 		500kohm_to_gnd: connected to ground via a 500kOhm resistor,
+		640kohm_to_gnd: connected to ground via a 640kOhm resistor,
 		three_state: left floating.
 		For a list of available output power down options read
 		outX_powerdown_mode_available. If Y is not present the
@@ -1491,3 +1493,10 @@ Description:
 		This ABI is especially applicable for humidity sensors
 		to heatup the device and get rid of any condensation
 		in some humidity environment
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_ph_raw
+KernelVersion:	4.5
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no offset etc.) pH reading of a substance as a negative
+		base-10 logarithm of hydrodium ions in a litre of water.

Documentation/devicetree/bindings/iio/accel/mma8452.txt

-Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer
+Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC
+triaxial accelerometer
 
 Required properties:
 
   - compatible: should contain one of
+    * "fsl,mma8451"
     * "fsl,mma8452"
     * "fsl,mma8453"
     * "fsl,mma8652"

Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt

+* AT91 SAMA5D2 Analog to Digital Converter (ADC)
+
+Required properties:
+  - compatible: Should be "atmel,sama5d2-adc".
+  - reg: Should contain ADC registers location and length.
+  - interrupts: Should contain the IRQ line for the ADC.
+  - clocks: phandle to device clock.
+  - clock-names: Must be "adc_clk".
+  - vref-supply: Supply used as reference for conversions.
+  - vddana-supply: Supply for the adc device.
+  - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC.
+  - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC.
+  - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC.
+
+Example:
+
+adc: adc@fc030000 {
+	compatible = "atmel,sama5d2-adc";
+	reg = <0xfc030000 0x100>;
+	interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+	clocks = <&adc_clk>;
+	clock-names = "adc_clk";
+	atmel,min-sample-rate-hz = <200000>;
+	atmel,max-sample-rate-hz = <20000000>;
+	atmel,startup-time-ms = <4>;
+	vddana-supply = <&vdd_3v3_lp_reg>;
+	vref-supply = <&vdd_3v3_lp_reg>;
+}

Documentation/devicetree/bindings/iio/adc/mcp3422.txt

@@ -6,6 +6,7 @@ Required properties:
 	"microchip,mcp3422" or
 	"microchip,mcp3423" or
 	"microchip,mcp3424" or
+	"microchip,mcp3425" or
 	"microchip,mcp3426" or
 	"microchip,mcp3427" or
 	"microchip,mcp3428"

Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt

+* Atlas Scientific pH-SM OEM sensor
+
+http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf
+
+Required properties:
+
+  - compatible: must be "atlas,ph-sm"
+  - reg: the I2C address of the sensor
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic interrupt client
+  node bindings.
+
+Example:
+
+atlas@65 {
+	compatible = "atlas,ph-sm";
+	reg = <0x65>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 2>;
+};

Documentation/devicetree/bindings/iio/health/max30100.txt

@@ -11,11 +11,19 @@ Required properties:
   Refer to interrupt-controller/interrupts.txt for generic
   interrupt client node bindings.
 
+Optional properties:
+  - maxim,led-current-microamp: configuration for LED current in microamperes
+    while the engine is running. First indexed value is the configuration for
+    the RED LED, and second value is for the IR LED.
+
+    Refer to the datasheet for the allowed current values.
+
 Example:
 
 max30100@057 {
 	compatible = "maxim,max30100";
 	reg = <57>;
+	maxim,led-current-microamp = <24000 50000>;
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 2>;
 };

Documentation/devicetree/bindings/iio/light/opt3001.txt

+* Texas Instruments OPT3001 Ambient Light Sensor
+
+The driver supports interrupt-driven and interrupt-less operation, depending
+on whether an interrupt property has been populated into the DT. Note that
+the optional generation of IIO events on rising/falling light threshold changes
+requires the use of interrupts. Without interrupts, only the simple reading
+of the current light value is supported through the IIO API.
+
+http://www.ti.com/product/opt3001
+
+Required properties:
+  - compatible: should be "ti,opt3001"
+  - reg: the I2C address of the sensor
+
+Optional properties:
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
+
+Example:
+
+opt3001@44 {
+	compatible = "ti,opt3001";
+	reg = <0x44>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -28,6 +28,7 @@ arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL
 artesyn	Artesyn Embedded Technologies Inc.
 asahi-kasei	Asahi Kasei Corp.
+atlas	Atlas Scientific LLC
 atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies

MAINTAINERS

@@ -1945,6 +1945,12 @@ M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/tty/serial/atmel_serial.c
 
+ATMEL SAMA5D2 ADC DRIVER
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+F:	drivers/iio/adc/at91-sama5d2_adc.c
+
 ATMEL Audio ALSA driver
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

drivers/iio/accel/Kconfig

@@ -143,7 +143,7 @@ config MMA8452
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for the following Freescale 3-axis
-	  accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
+	  accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called mma8452.

drivers/iio/accel/st_accel_core.c

@@ -67,6 +67,8 @@
 #define ST_ACCEL_1_DRDY_IRQ_ADDR		0x22
 #define ST_ACCEL_1_DRDY_IRQ_INT1_MASK		0x10
 #define ST_ACCEL_1_DRDY_IRQ_INT2_MASK		0x08
+#define ST_ACCEL_1_IHL_IRQ_ADDR			0x25
+#define ST_ACCEL_1_IHL_IRQ_MASK			0x02
 #define ST_ACCEL_1_MULTIREAD_BIT		true
 
 /* CUSTOM VALUES FOR SENSOR 2 */
@@ -92,6 +94,8 @@
 #define ST_ACCEL_2_DRDY_IRQ_ADDR		0x22
 #define ST_ACCEL_2_DRDY_IRQ_INT1_MASK		0x02
 #define ST_ACCEL_2_DRDY_IRQ_INT2_MASK		0x10
+#define ST_ACCEL_2_IHL_IRQ_ADDR			0x22
+#define ST_ACCEL_2_IHL_IRQ_MASK			0x80
 #define ST_ACCEL_2_MULTIREAD_BIT		true
 
 /* CUSTOM VALUES FOR SENSOR 3 */
@@ -125,6 +129,8 @@
 #define ST_ACCEL_3_DRDY_IRQ_ADDR		0x23
 #define ST_ACCEL_3_DRDY_IRQ_INT1_MASK		0x80
 #define ST_ACCEL_3_DRDY_IRQ_INT2_MASK		0x00
+#define ST_ACCEL_3_IHL_IRQ_ADDR			0x23
+#define ST_ACCEL_3_IHL_IRQ_MASK			0x40
 #define ST_ACCEL_3_IG1_EN_ADDR			0x23
 #define ST_ACCEL_3_IG1_EN_MASK			0x08
 #define ST_ACCEL_3_MULTIREAD_BIT		false
@@ -169,6 +175,8 @@
 #define ST_ACCEL_5_DRDY_IRQ_ADDR		0x22
 #define ST_ACCEL_5_DRDY_IRQ_INT1_MASK		0x04
 #define ST_ACCEL_5_DRDY_IRQ_INT2_MASK		0x20
+#define ST_ACCEL_5_IHL_IRQ_ADDR			0x22
+#define ST_ACCEL_5_IHL_IRQ_MASK			0x80
 #define ST_ACCEL_5_IG1_EN_ADDR			0x21
 #define ST_ACCEL_5_IG1_EN_MASK			0x08
 #define ST_ACCEL_5_MULTIREAD_BIT		false
@@ -292,6 +300,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
 			.mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
 			.mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
+			.addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR,
+			.mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK,
 		},
 		.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
 		.bootime = 2,
@@ -355,6 +365,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
 			.mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
 			.mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
+			.addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR,
+			.mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK,
 		},
 		.multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
 		.bootime = 2,
@@ -430,6 +442,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
 			.mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
 			.mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
+			.addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR,
+			.mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK,
 			.ig1 = {
 				.en_addr = ST_ACCEL_3_IG1_EN_ADDR,
 				.en_mask = ST_ACCEL_3_IG1_EN_MASK,
@@ -537,6 +551,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.addr = ST_ACCEL_5_DRDY_IRQ_ADDR,
 			.mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK,
 			.mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK,
+			.addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR,
+			.mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK,
 		},
 		.multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT,
 		.bootime = 2, /* guess */

drivers/iio/adc/Kconfig

@@ -131,6 +131,16 @@ config AT91_ADC
 	  To compile this driver as a module, choose M here: the module will be
 	  called at91_adc.
 
+config AT91_SAMA5D2_ADC
+	tristate "Atmel AT91 SAMA5D2 ADC"
+	depends on ARCH_AT91 || COMPILE_TEST
+	help
+	  Say yes here to build support for Atmel SAMA5D2 ADC which is
+	  available on SAMA5D2 SoC family.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called at91-sama5d2_adc.
+
 config AXP288_ADC
 	tristate "X-Powers AXP288 ADC driver"
 	depends on MFD_AXP20X
@@ -265,11 +275,11 @@ config MCP320X
 	  called mcp320x.
 
 config MCP3422
-	tristate "Microchip Technology MCP3422/3/4/6/7/8 driver"
+	tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver"
 	depends on I2C
 	help
-	  Say yes here to build support for Microchip Technology's
-	  MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428
+	  Say yes here to build support for Microchip Technology's MCP3421
+	  MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428
 	  analog to digital converters.
 
 	  This driver can also be built as a module. If so, the module will be

drivers/iio/adc/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
 obj-$(CONFIG_AD7887) += ad7887.o
 obj-$(CONFIG_AD799X) += ad799x.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
+obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
 obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
 obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
 obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o

drivers/iio/adc/axp288_adc.c

@@ -46,7 +46,7 @@ struct axp288_adc_info {
 	struct regmap *regmap;
 };
 
-static const struct iio_chan_spec const axp288_adc_channels[] = {
+static const struct iio_chan_spec axp288_adc_channels[] = {
 	{
 		.indexed = 1,
 		.type = IIO_TEMP,

drivers/iio/adc/mcp320x.c

@@ -187,26 +187,27 @@ static int mcp320x_read_raw(struct iio_dev *indio_dev,
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
 	}
 
-#define MCP320X_VOLTAGE_CHANNEL_DIFF(num)			\
+#define MCP320X_VOLTAGE_CHANNEL_DIFF(chan1, chan2)		\
 	{							\
 		.type = IIO_VOLTAGE,				\
 		.indexed = 1,					\
-		.channel = (num * 2),				\
-		.channel2 = (num * 2 + 1),			\
-		.address = (num * 2),				\
+		.channel = (chan1),				\
+		.channel2 = (chan2),				\
+		.address = (chan1),				\
 		.differential = 1,				\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
 	}
 
 static const struct iio_chan_spec mcp3201_channels[] = {
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
 };
 
 static const struct iio_chan_spec mcp3202_channels[] = {
 	MCP320X_VOLTAGE_CHANNEL(0),
 	MCP320X_VOLTAGE_CHANNEL(1),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
 };
 
 static const struct iio_chan_spec mcp3204_channels[] = {
@@ -214,8 +215,10 @@ static const struct iio_chan_spec mcp3204_channels[] = {
 	MCP320X_VOLTAGE_CHANNEL(1),
 	MCP320X_VOLTAGE_CHANNEL(2),
 	MCP320X_VOLTAGE_CHANNEL(3),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2),
 };
 
 static const struct iio_chan_spec mcp3208_channels[] = {
@@ -227,10 +230,14 @@ static const struct iio_chan_spec mcp3208_channels[] = {
 	MCP320X_VOLTAGE_CHANNEL(5),
 	MCP320X_VOLTAGE_CHANNEL(6),
 	MCP320X_VOLTAGE_CHANNEL(7),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(1),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(2),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(3),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(4, 5),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(5, 4),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(6, 7),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(7, 6),
 };
 
 static const struct iio_info mcp320x_info = {

drivers/iio/adc/mcp3422.c

 /*
- * mcp3422.c - driver for the Microchip mcp3422/3/4/6/7/8 chip family
+ * mcp3422.c - driver for the Microchip mcp3421/2/3/4/5/6/7/8 chip family
  *
  * Copyright (C) 2013, Angelo Compagnucci
  * Author: Angelo Compagnucci <angelo.compagnucci@gmail.com>
  *
  * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf
  *            http://ww1.microchip.com/downloads/en/DeviceDoc/22226a.pdf
+ *            http://ww1.microchip.com/downloads/en/DeviceDoc/22072b.pdf
  *
  * This driver exports the value of analog input voltage to sysfs, the
  * voltage unit is nV.
@@ -357,6 +358,7 @@ static int mcp3422_probe(struct i2c_client *client,
 
 	switch (adc->id) {
 	case 1:
+	case 5:
 		indio_dev->channels = mcp3421_channels;
 		indio_dev->num_channels = ARRAY_SIZE(mcp3421_channels);
 		break;
@@ -395,6 +397,7 @@ static const struct i2c_device_id mcp3422_id[] = {
 	{ "mcp3422", 2 },
 	{ "mcp3423", 3 },
 	{ "mcp3424", 4 },
+	{ "mcp3425", 5 },
 	{ "mcp3426", 6 },
 	{ "mcp3427", 7 },
 	{ "mcp3428", 8 },
@@ -421,5 +424,5 @@ static struct i2c_driver mcp3422_driver = {
 module_i2c_driver(mcp3422_driver);
 
 MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>");
-MODULE_DESCRIPTION("Microchip mcp3422/3/4/6/7/8 driver");
+MODULE_DESCRIPTION("Microchip mcp3421/2/3/4/5/6/7/8 driver");
 MODULE_LICENSE("GPL v2");

drivers/iio/chemical/Kconfig

@@ -4,6 +4,19 @@
 
 menu "Chemical Sensors"
 
+config ATLAS_PH_SENSOR
+	tristate "Atlas Scientific OEM pH-SM sensor"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 Say Y here to build I2C interface support for the Atlas
+	 Scientific OEM pH-SM sensor.
+
+	 To compile this driver as module, choose M here: the
+	 module will be called atlas-ph-sensor.
+
 config IAQCORE
 	tristate "AMS iAQ-Core VOC sensors"
 	depends on I2C

drivers/iio/chemical/Makefile

@@ -3,5 +3,6 @@
 #
 
 # When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_ATLAS_PH_SENSOR)	+= atlas-ph-sensor.o
 obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
 obj-$(CONFIG_VZ89X)		+= vz89x.o

drivers/iio/common/st_sensors/st_sensors_core.c

@@ -18,13 +18,15 @@
 #include <asm/unaligned.h>
 #include <linux/iio/common/st_sensors.h>
 
+#include "st_sensors_core.h"
+
 static inline u32 st_sensors_get_unaligned_le24(const u8 *p)
 {
 	return (s32)((p[0] | p[1] << 8 | p[2] << 16) << 8) >> 8;
 }
 
-static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
-						u8 reg_addr, u8 mask, u8 data)
+int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
+				    u8 reg_addr, u8 mask, u8 data)
 {
 	int err;
 	u8 new_data;

drivers/iio/common/st_sensors/st_sensors_core.h

+/*
+ * Local functions in the ST Sensors core
+ */
+#ifndef __ST_SENSORS_CORE_H
+#define __ST_SENSORS_CORE_H
+int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
+				    u8 reg_addr, u8 mask, u8 data);
+#endif

drivers/iio/common/st_sensors/st_sensors_trigger.c

@@ -14,32 +14,65 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/trigger.h>
 #include <linux/interrupt.h>
-
 #include <linux/iio/common/st_sensors.h>
-
+#include "st_sensors_core.h"
 
 int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 				const struct iio_trigger_ops *trigger_ops)
 {
-	int err;
+	int err, irq;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	unsigned long irq_trig;
 
 	sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name);
 	if (sdata->trig == NULL) {
-		err = -ENOMEM;
 		dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n");
-		goto iio_trigger_alloc_error;
+		return -ENOMEM;
 	}
 
-	err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev),
+	irq = sdata->get_irq_data_ready(indio_dev);
+	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+	/*
+	 * If the IRQ is triggered on falling edge, we need to mark the
+	 * interrupt as active low, if the hardware supports this.
+	 */
+	if (irq_trig == IRQF_TRIGGER_FALLING) {
+		if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
+			dev_err(&indio_dev->dev,
+				"falling edge specified for IRQ but hardware "
+				"only support rising edge, will request "
+				"rising edge\n");
+			irq_trig = IRQF_TRIGGER_RISING;
+		} else {
+			/* Set up INT active low i.e. falling edge */
+			err = st_sensors_write_data_with_mask(indio_dev,
+				sdata->sensor_settings->drdy_irq.addr_ihl,
+				sdata->sensor_settings->drdy_irq.mask_ihl, 1);
+			if (err < 0)
+				goto iio_trigger_free;
+			dev_info(&indio_dev->dev,
+				 "interrupts on the falling edge\n");
+		}
+	} else if (irq_trig == IRQF_TRIGGER_RISING) {
+		dev_info(&indio_dev->dev,
+			 "interrupts on the rising edge\n");
+
+	} else {
+		dev_err(&indio_dev->dev,
+		"unsupported IRQ trigger specified (%lx), only "
+			"rising and falling edges supported, enforce "
+			"rising edge\n", irq_trig);
+		irq_trig = IRQF_TRIGGER_RISING;
+	}
+	err = request_threaded_irq(irq,
 			iio_trigger_generic_data_rdy_poll,
 			NULL,
-			IRQF_TRIGGER_RISING,
+			irq_trig,
 			sdata->trig->name,
 			sdata->trig);
 	if (err) {
 		dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n");
-		goto request_irq_error;
+		goto iio_trigger_free;
 	}
 
 	iio_trigger_set_drvdata(sdata->trig, indio_dev);
@@ -57,9 +90,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 
 iio_trigger_register_error:
 	free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig);
-request_irq_error:
+iio_trigger_free:
 	iio_trigger_free(sdata->trig);
-iio_trigger_alloc_error:
 	return err;
 }
 EXPORT_SYMBOL(st_sensors_allocate_trigger);

drivers/iio/dac/Kconfig

@@ -111,6 +111,16 @@ config AD5755
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5755.
 
+config AD5761
+	tristate "Analog Devices AD5761/61R/21/21R DAC driver"
+	depends on SPI_MASTER
+	help
+	  Say yes here to build support for Analog Devices AD5761, AD5761R, AD5721,
+	  AD5721R Digital to Analog Converter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad5761.
+
 config AD5764
 	tristate "Analog Devices AD5764/64R/44/44R DAC driver"
 	depends on SPI_MASTER
@@ -176,11 +186,11 @@ config MAX5821
 	  10 bits DAC.
 
 config MCP4725
-	tristate "MCP4725 DAC driver"
+	tristate "MCP4725/6 DAC driver"
 	depends on I2C
 	---help---
 	  Say Y here if you want to build a driver for the Microchip
-	  MCP 4725 12-bit digital-to-analog converter (DAC) with I2C
+	  MCP 4725/6 12-bit digital-to-analog converter (DAC) with I2C
 	  interface.
 
 	  To compile this driver as a module, choose M here: the module

drivers/iio/dac/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_AD5504) += ad5504.o
 obj-$(CONFIG_AD5446) += ad5446.o
 obj-$(CONFIG_AD5449) += ad5449.o
 obj-$(CONFIG_AD5755) += ad5755.o
+obj-$(CONFIG_AD5761) += ad5761.o
 obj-$(CONFIG_AD5764) += ad5764.o
 obj-$(CONFIG_AD5791) += ad5791.o
 obj-$(CONFIG_AD5686) += ad5686.o

drivers/iio/dac/ad5761.c

+/*
+ * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter
+ *
+ * Copyright 2016 Qtechnology A/S
+ * 2016 Ricardo Ribalda <ricardo.ribalda@gmail.com>
+ *
+ * Licensed under the GPL-2.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/bitops.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/regulator/consumer.h>
+#include <linux/platform_data/ad5761.h>
+
+#define AD5761_ADDR(addr)		((addr & 0xf) << 16)
+#define AD5761_ADDR_NOOP		0x0
+#define AD5761_ADDR_DAC_WRITE		0x3
+#define AD5761_ADDR_CTRL_WRITE_REG	0x4
+#define AD5761_ADDR_SW_DATA_RESET	0x7
+#define AD5761_ADDR_DAC_READ		0xb
+#define AD5761_ADDR_CTRL_READ_REG	0xc
+#define AD5761_ADDR_SW_FULL_RESET	0xf
+
+#define AD5761_CTRL_USE_INTVREF		BIT(5)
+#define AD5761_CTRL_ETS			BIT(6)
+
+/**
+ * struct ad5761_chip_info - chip specific information
+ * @int_vref:	Value of the internal reference voltage in mV - 0 if external
+ *		reference voltage is used
+ * @channel:	channel specification
+*/
+
+struct ad5761_chip_info {
+	unsigned long int_vref;
+	const struct iio_chan_spec channel;
+};
+
+struct ad5761_range_params {
+	int m;
+	int c;
+};
+
+enum ad5761_supported_device_ids {
+	ID_AD5721,
+	ID_AD5721R,
+	ID_AD5761,
+	ID_AD5761R,
+};
+
+/**
+ * struct ad5761_state - driver instance specific data
+ * @spi:		spi_device
+ * @vref_reg:		reference voltage regulator
+ * @use_intref:		true when the internal voltage reference is used
+ * @vref:		actual voltage reference in mVolts
+ * @range:		output range mode used
+ * @data:		cache aligned spi buffer
+ */
+struct ad5761_state {
+	struct spi_device		*spi;
+	struct regulator		*vref_reg;
+
+	bool use_intref;
+	int vref;
+	enum ad5761_voltage_range range;
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	union {
+		__be32 d32;
+		u8 d8[4];
+	} data[3] ____cacheline_aligned;
+};
+
+static const struct ad5761_range_params ad5761_range_params[] = {
+	[AD5761_VOLTAGE_RANGE_M10V_10V] = {
+		.m = 80,
+		.c = 40,
+	},
+	[AD5761_VOLTAGE_RANGE_0V_10V] = {
+		.m = 40,
+		.c = 0,
+	},
+	[AD5761_VOLTAGE_RANGE_M5V_5V] = {
+		.m = 40,
+		.c = 20,
+	},
+	[AD5761_VOLTAGE_RANGE_0V_5V] = {
+		.m = 20,
+		.c = 0,
+	},
+	[AD5761_VOLTAGE_RANGE_M2V5_7V5] = {
+		.m = 40,
+		.c = 10,
+	},
+	[AD5761_VOLTAGE_RANGE_M3V_3V] = {
+		.m = 24,
+		.c = 12,
+	},
+	[AD5761_VOLTAGE_RANGE_0V_16V] = {
+		.m = 64,
+		.c = 0,
+	},
+	[AD5761_VOLTAGE_RANGE_0V_20V] = {
+		.m = 80,
+		.c = 0,
+	},
+};
+
+static int _ad5761_spi_write(struct ad5761_state *st, u8 addr, u16 val)
+{
+	st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr) | val);
+
+	return spi_write(st->spi, &st->data[0].d8[1], 3);
+}
+
+static int ad5761_spi_write(struct iio_dev *indio_dev, u8 addr, u16 val)
+{
+	struct ad5761_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&indio_dev->mlock);
+	ret = _ad5761_spi_write(st, addr, val);
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static int _ad5761_spi_read(struct ad5761_state *st, u8 addr, u16 *val)
+{
+	int ret;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = &st->data[0].d8[1],
+			.bits_per_word = 8,
+			.len = 3,
+			.cs_change = true,
+		}, {
+			.tx_buf = &st->data[1].d8[1],
+			.rx_buf = &st->data[2].d8[1],
+			.bits_per_word = 8,
+			.len = 3,
+		},
+	};
+
+	st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr));
+	st->data[1].d32 = cpu_to_be32(AD5761_ADDR(AD5761_ADDR_NOOP));
+
+	ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers));
+
+	*val = be32_to_cpu(st->data[2].d32);
+
+	return ret;
+}
+
+static int ad5761_spi_read(struct iio_dev *indio_dev, u8 addr, u16 *val)
+{
+	struct ad5761_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&indio_dev->mlock);
+	ret = _ad5761_spi_read(st, addr, val);
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static int ad5761_spi_set_range(struct ad5761_state *st,
+				enum ad5761_voltage_range range)
+{
+	u16 aux;
+	int ret;
+
+	aux = (range & 0x7) | AD5761_CTRL_ETS;
+
+	if (st->use_intref)
+		aux |= AD5761_CTRL_USE_INTVREF;
+
+	ret = _ad5761_spi_write(st, AD5761_ADDR_SW_FULL_RESET, 0);
+	if (ret)
+		return ret;
+
+	ret = _ad5761_spi_write(st, AD5761_ADDR_CTRL_WRITE_REG, aux);
+	if (ret)
+		return ret;
+
+	st->range = range;
+
+	return 0;
+}
+
+static int ad5761_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long mask)
+{
+	struct ad5761_state *st;
+	int ret;
+	u16 aux;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = ad5761_spi_read(indio_dev, AD5761_ADDR_DAC_READ, &aux);
+		if (ret)
+			return ret;
+		*val = aux >> chan->scan_type.shift;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		st = iio_priv(indio_dev);
+		*val = st->vref * ad5761_range_params[st->range].m;
+		*val /= 10;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_OFFSET:
+		st = iio_priv(indio_dev);
+		*val = -(1 << chan->scan_type.realbits);
+		*val *=	ad5761_range_params[st->range].c;
+		*val /=	ad5761_range_params[st->range].m;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad5761_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	u16 aux;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val2 || (val << chan->scan_type.shift) > 0xffff || val < 0)
+		return -EINVAL;
+
+	aux = val << chan->scan_type.shift;
+
+	return ad5761_spi_write(indio_dev, AD5761_ADDR_DAC_WRITE, aux);
+}
+
+static const struct iio_info ad5761_info = {
+	.read_raw = &ad5761_read_raw,
+	.write_raw = &ad5761_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+#define AD5761_CHAN(_bits) {				\
+	.type = IIO_VOLTAGE,				\
+	.output = 1,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
+		BIT(IIO_CHAN_INFO_OFFSET),		\
+	.scan_type = {					\
+		.sign = 'u',				\
+		.realbits = (_bits),			\
+		.storagebits = 16,			\
+		.shift = 16 - (_bits),			\
+	},						\
+}
+
+static const struct ad5761_chip_info ad5761_chip_infos[] = {
+	[ID_AD5721] = {
+		.int_vref = 0,
+		.channel = AD5761_CHAN(12),
+	},
+	[ID_AD5721R] = {
+		.int_vref = 2500,
+		.channel = AD5761_CHAN(12),
+	},
+	[ID_AD5761] = {
+		.int_vref = 0,
+		.channel = AD5761_CHAN(16),
+	},
+	[ID_AD5761R] = {
+		.int_vref = 2500,
+		.channel = AD5761_CHAN(16),
+	},
+};
+
+static int ad5761_get_vref(struct ad5761_state *st,
+			   const struct ad5761_chip_info *chip_info)
+{
+	int ret;
+
+	st->vref_reg = devm_regulator_get_optional(&st->spi->dev, "vref");
+	if (PTR_ERR(st->vref_reg) == -ENODEV) {
+		/* Use Internal regulator */
+		if (!chip_info->int_vref) {
+			dev_err(&st->spi->dev,
+				"Voltage reference not found\n");
+			return -EIO;
+		}
+
+		st->use_intref = true;
+		st->vref = chip_info->int_vref;
+		return 0;
+	}
+
+	if (IS_ERR(st->vref_reg)) {
+		dev_err(&st->spi->dev,
+			"Error getting voltage reference regulator\n");
+		return PTR_ERR(st->vref_reg);
+	}
+
+	ret = regulator_enable(st->vref_reg);
+	if (ret) {
+		dev_err(&st->spi->dev,
+			 "Failed to enable voltage reference\n");
+		return ret;
+	}
+
+	ret = regulator_get_voltage(st->vref_reg);
+	if (ret < 0) {
+		dev_err(&st->spi->dev,
+			 "Failed to get voltage reference value\n");
+		goto disable_regulator_vref;
+	}
+
+	if (ret < 2000000 || ret > 3000000) {
+		dev_warn(&st->spi->dev,
+			 "Invalid external voltage ref. value %d uV\n", ret);
+		ret = -EIO;
+		goto disable_regulator_vref;
+	}
+
+	st->vref = ret / 1000;
+	st->use_intref = false;
+
+	return 0;
+
+disable_regulator_vref:
+	regulator_disable(st->vref_reg);
+	st->vref_reg = NULL;
+	return ret;
+}
+
+static int ad5761_probe(struct spi_device *spi)
+{
+	struct iio_dev *iio_dev;
+	struct ad5761_state *st;
+	int ret;
+	const struct ad5761_chip_info *chip_info =
+		&ad5761_chip_infos[spi_get_device_id(spi)->driver_data];
+	enum ad5761_voltage_range voltage_range = AD5761_VOLTAGE_RANGE_0V_5V;
+	struct ad5761_platform_data *pdata = dev_get_platdata(&spi->dev);
+
+	iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!iio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(iio_dev);
+
+	st->spi = spi;
+	spi_set_drvdata(spi, iio_dev);
+
+	ret = ad5761_get_vref(st, chip_info);
+	if (ret)
+		return ret;
+
+	if (pdata)
+		voltage_range = pdata->voltage_range;
+
+	ret = ad5761_spi_set_range(st, voltage_range);
+	if (ret)
+		goto disable_regulator_err;
+
+	iio_dev->dev.parent = &spi->dev;
+	iio_dev->info = &ad5761_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->channels = &chip_info->channel;
+	iio_dev->num_channels = 1;
+	iio_dev->name = spi_get_device_id(st->spi)->name;
+	ret = iio_device_register(iio_dev);
+	if (ret)
+		goto disable_regulator_err;
+
+	return 0;
+
+disable_regulator_err:
+	if (!IS_ERR_OR_NULL(st->vref_reg))
+		regulator_disable(st->vref_reg);
+
+	return ret;
+}
+
+static int ad5761_remove(struct spi_device *spi)
+{
+	struct iio_dev *iio_dev = spi_get_drvdata(spi);
+	struct ad5761_state *st = iio_priv(iio_dev);
+
+	iio_device_unregister(iio_dev);
+
+	if (!IS_ERR_OR_NULL(st->vref_reg))
+		regulator_disable(st->vref_reg);
+
+	return 0;
+}
+
+static const struct spi_device_id ad5761_id[] = {
+	{"ad5721", ID_AD5721},
+	{"ad5721r", ID_AD5721R},
+	{"ad5761", ID_AD5761},
+	{"ad5761r", ID_AD5761R},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad5761_id);
+
+static struct spi_driver ad5761_driver = {
+	.driver = {
+		   .name = "ad5761",
+		   },
+	.probe = ad5761_probe,
+	.remove = ad5761_remove,
+	.id_table = ad5761_id,
+};
+module_spi_driver(ad5761_driver);
+
+MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices AD5721, AD5721R, AD5761, AD5761R driver");
+MODULE_LICENSE("GPL v2");

drivers/iio/dac/mcp4725.c

 /*
- * mcp4725.c - Support for Microchip MCP4725
+ * mcp4725.c - Support for Microchip MCP4725/6
  *
  * Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net>
  *
@@ -134,6 +134,12 @@ static const char * const mcp4725_powerdown_modes[] = {
 	"500kohm_to_gnd"
 };
 
+static const char * const mcp4726_powerdown_modes[] = {
+	"1kohm_to_gnd",
+	"125kohm_to_gnd",
+	"640kohm_to_gnd"
+};
+
 static int mcp4725_get_powerdown_mode(struct iio_dev *indio_dev,
 	const struct iio_chan_spec *chan)
 {
@@ -182,11 +188,24 @@ static ssize_t mcp4725_write_powerdown(struct iio_dev *indio_dev,
 	return len;
 }
 
-static const struct iio_enum mcp4725_powerdown_mode_enum = {
-	.items = mcp4725_powerdown_modes,
-	.num_items = ARRAY_SIZE(mcp4725_powerdown_modes),
-	.get = mcp4725_get_powerdown_mode,
-	.set = mcp4725_set_powerdown_mode,
+enum {
+	MCP4725,
+	MCP4726,
+};
+
+static const struct iio_enum mcp472x_powerdown_mode_enum[] = {
+	[MCP4725] = {
+		.items = mcp4725_powerdown_modes,
+		.num_items = ARRAY_SIZE(mcp4725_powerdown_modes),
+		.get = mcp4725_get_powerdown_mode,
+		.set = mcp4725_set_powerdown_mode,
+	},
+	[MCP4726] = {
+		.items = mcp4726_powerdown_modes,
+		.num_items = ARRAY_SIZE(mcp4726_powerdown_modes),
+		.get = mcp4725_get_powerdown_mode,
+		.set = mcp4725_set_powerdown_mode,
+	},
 };
 
 static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = {
@@ -196,19 +215,46 @@ static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = {
 		.write = mcp4725_write_powerdown,
 		.shared = IIO_SEPARATE,
 	},
-	IIO_ENUM("powerdown_mode", IIO_SEPARATE, &mcp4725_powerdown_mode_enum),
-	IIO_ENUM_AVAILABLE("powerdown_mode", &mcp4725_powerdown_mode_enum),
+	IIO_ENUM("powerdown_mode", IIO_SEPARATE,
+			&mcp472x_powerdown_mode_enum[MCP4725]),
+	IIO_ENUM_AVAILABLE("powerdown_mode",
+			&mcp472x_powerdown_mode_enum[MCP4725]),
+	{ },
+};
+
+static const struct iio_chan_spec_ext_info mcp4726_ext_info[] = {
+	{
+		.name = "powerdown",
+		.read = mcp4725_read_powerdown,
+		.write = mcp4725_write_powerdown,
+		.shared = IIO_SEPARATE,
+	},
+	IIO_ENUM("powerdown_mode", IIO_SEPARATE,
+			&mcp472x_powerdown_mode_enum[MCP4726]),
+	IIO_ENUM_AVAILABLE("powerdown_mode",
+			&mcp472x_powerdown_mode_enum[MCP4726]),
 	{ },
 };
 
-static const struct iio_chan_spec mcp4725_channel = {
-	.type		= IIO_VOLTAGE,
-	.indexed	= 1,
-	.output		= 1,
-	.channel	= 0,
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
-	.ext_info	= mcp4725_ext_info,
+static const struct iio_chan_spec mcp472x_channel[] = {
+	[MCP4725] = {
+		.type		= IIO_VOLTAGE,
+		.indexed	= 1,
+		.output		= 1,
+		.channel	= 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		.ext_info	= mcp4725_ext_info,
+	},
+	[MCP4726] = {
+		.type		= IIO_VOLTAGE,
+		.indexed	= 1,
+		.output		= 1,
+		.channel	= 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		.ext_info	= mcp4726_ext_info,
+	},
 };
 
 static int mcp4725_set_value(struct iio_dev *indio_dev, int val)
@@ -301,7 +347,7 @@ static int mcp4725_probe(struct i2c_client *client,
 
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->info = &mcp4725_info;
-	indio_dev->channels = &mcp4725_channel;
+	indio_dev->channels = &mcp472x_channel[id->driver_data];
 	indio_dev->num_channels = 1;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
@@ -315,7 +361,7 @@ static int mcp4725_probe(struct i2c_client *client,
 	}
 	pd = (inbuf[0] >> 1) & 0x3;
 	data->powerdown = pd > 0 ? true : false;
-	data->powerdown_mode = pd ? pd-1 : 2; /* 500kohm_to_gnd */
+	data->powerdown_mode = pd ? pd - 1 : 2; /* largest register to gnd */
 	data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4);
 
 	return iio_device_register(indio_dev);
@@ -328,7 +374,8 @@ static int mcp4725_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id mcp4725_id[] = {
-	{ "mcp4725", 0 },
+	{ "mcp4725", MCP4725 },
+	{ "mcp4726", MCP4726 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, mcp4725_id);
@@ -345,5 +392,5 @@ static struct i2c_driver mcp4725_driver = {
 module_i2c_driver(mcp4725_driver);
 
 MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
-MODULE_DESCRIPTION("MCP4725 12-bit DAC");
+MODULE_DESCRIPTION("MCP4725/6 12-bit DAC");
 MODULE_LICENSE("GPL");

drivers/iio/gyro/st_gyro_core.c

@@ -185,6 +185,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
 		.drdy_irq = {
 			.addr = ST_GYRO_1_DRDY_IRQ_ADDR,
 			.mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK,
+			/*
+			 * The sensor has IHL (active low) and open
+			 * drain settings, but only for INT1 and not
+			 * for the DRDY line on INT2.
+			 */
 		},
 		.multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
 		.bootime = 2,
@@ -248,6 +253,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
 		.drdy_irq = {
 			.addr = ST_GYRO_2_DRDY_IRQ_ADDR,
 			.mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK,
+			/*
+			 * The sensor has IHL (active low) and open
+			 * drain settings, but only for INT1 and not
+			 * for the DRDY line on INT2.
+			 */
 		},
 		.multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
 		.bootime = 2,
@@ -307,6 +317,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
 		.drdy_irq = {
 			.addr = ST_GYRO_3_DRDY_IRQ_ADDR,
 			.mask_int2 = ST_GYRO_3_DRDY_IRQ_INT2_MASK,
+			/*
+			 * The sensor has IHL (active low) and open
+			 * drain settings, but only for INT1 and not
+			 * for the DRDY line on INT2.
+			 */
 		},
 		.multi_read_bit = ST_GYRO_3_MULTIREAD_BIT,
 		.bootime = 2,

drivers/iio/health/max30100.c

@@ -13,7 +13,7 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
- * TODO: allow LED current and pulse length controls via device tree properties
+ * TODO: enable pulse length controls via device tree properties
  */
 
 #include <linux/module.h>
@@ -24,6 +24,7 @@
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -65,6 +66,7 @@
 #define MAX30100_REG_SPO2_CONFIG_1600US		0x3
 
 #define MAX30100_REG_LED_CONFIG			0x09
+#define MAX30100_REG_LED_CONFIG_LED_MASK	0x0f
 #define MAX30100_REG_LED_CONFIG_RED_LED_SHIFT	4
 
 #define MAX30100_REG_LED_CONFIG_24MA		0x07
@@ -111,6 +113,12 @@ static const struct regmap_config max30100_regmap_config = {
 	.volatile_reg = max30100_is_volatile_reg,
 };
 
+static const unsigned int max30100_led_current_mapping[] = {
+	4400, 7600, 11000, 14200, 17400,
+	20800, 24000, 27100, 30600, 33800,
+	37000, 40200, 43600, 46800, 50000
+};
+
 static const unsigned long max30100_scan_masks[] = {0x3, 0};
 
 static const struct iio_chan_spec max30100_channels[] = {
@@ -243,15 +251,76 @@ static irqreturn_t max30100_interrupt_handler(int irq, void *private)
 	return IRQ_HANDLED;
 }
 
+static int max30100_get_current_idx(unsigned int val, int *reg)
+{
+	int idx;
+
+	/* LED turned off */
+	if (val == 0) {
+		*reg = 0;
+		return 0;
+	}
+
+	for (idx = 0; idx < ARRAY_SIZE(max30100_led_current_mapping); idx++) {
+		if (max30100_led_current_mapping[idx] == val) {
+			*reg = idx + 1;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int max30100_led_init(struct max30100_data *data)
+{
+	struct device *dev = &data->client->dev;
+	struct device_node *np = dev->of_node;
+	unsigned int val[2];
+	int reg, ret;
+
+	ret = of_property_read_u32_array(np, "maxim,led-current-microamp",
+					(unsigned int *) &val, 2);
+	if (ret) {
+		/* Default to 24 mA RED LED, 50 mA IR LED */
+		reg = (MAX30100_REG_LED_CONFIG_24MA <<
+			MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) |
+			MAX30100_REG_LED_CONFIG_50MA;
+		dev_warn(dev, "no led-current-microamp set");
+
+		return regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, reg);
+	}
+
+	/* RED LED current */
+	ret = max30100_get_current_idx(val[0], &reg);
+	if (ret) {
+		dev_err(dev, "invalid RED current setting %d", val[0]);
+		return ret;
+	}
+
+	ret = regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG,
+		MAX30100_REG_LED_CONFIG_LED_MASK <<
+		MAX30100_REG_LED_CONFIG_RED_LED_SHIFT,
+		reg << MAX30100_REG_LED_CONFIG_RED_LED_SHIFT);
+	if (ret)
+		return ret;
+
+	/* IR LED current */
+	ret = max30100_get_current_idx(val[1], &reg);
+	if (ret) {
+		dev_err(dev, "invalid IR current setting %d", val[1]);
+		return ret;
+	}
+
+	return regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG,
+		MAX30100_REG_LED_CONFIG_LED_MASK, reg);
+}
+
 static int max30100_chip_init(struct max30100_data *data)
 {
 	int ret;
 
-	/* RED IR LED = 24mA, IR LED = 50mA */
-	ret = regmap_write(data->regmap, MAX30100_REG_LED_CONFIG,
-				(MAX30100_REG_LED_CONFIG_24MA <<
-				 MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) |
-				 MAX30100_REG_LED_CONFIG_50MA);
+	/* setup LED current settings */
+	ret = max30100_led_init(data);
 	if (ret)
 		return ret;
 

drivers/iio/humidity/Kconfig

@@ -43,14 +43,16 @@ config SI7005
 	  humidity and temperature sensor.
 
 	  To compile this driver as a module, choose M here: the module
-	  will be called si7005.
+	  will be called si7005. This driver also
+	  supports Hoperf TH02 Humidity and Temperature Sensor.
 
 config SI7020
 	tristate "Si7013/20/21 Relative Humidity and Temperature Sensors"
 	depends on I2C
 	help
 	  Say yes here to build support for the Silicon Labs Si7013/20/21
-	  Relative Humidity and Temperature Sensors.
+	  Relative Humidity and Temperature Sensors. This driver also
+	  supports Hoperf TH06 Humidity and Temperature Sensor.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called si7020.

drivers/iio/humidity/dht11.c

@@ -50,12 +50,32 @@
 #define DHT11_EDGES_PER_READ (2 * DHT11_BITS_PER_READ + \
 			      DHT11_EDGES_PREAMBLE + 1)
 
-/* Data transmission timing (nano seconds) */
+/*
+ * Data transmission timing:
+ * Data bits are encoded as pulse length (high time) on the data line.
+ * 0-bit: 22-30uS -- typically 26uS (AM2302)
+ * 1-bit: 68-75uS -- typically 70uS (AM2302)
+ * The acutal timings also depend on the properties of the cable, with
+ * longer cables typically making pulses shorter.
+ *
+ * Our decoding depends on the time resolution of the system:
+ * timeres > 34uS ... don't know what a 1-tick pulse is
+ * 34uS > timeres > 30uS ... no problem (30kHz and 32kHz clocks)
+ * 30uS > timeres > 23uS ... don't know what a 2-tick pulse is
+ * timeres < 23uS ... no problem
+ *
+ * Luckily clocks in the 33-44kHz range are quite uncommon, so we can
+ * support most systems if the threshold for decoding a pulse as 1-bit
+ * is chosen carefully. If somebody really wants to support clocks around
+ * 40kHz, where this driver is most unreliable, there are two options.
+ * a) select an implementation using busy loop polling on those systems
+ * b) use the checksum to do some probabilistic decoding
+ */
 #define DHT11_START_TRANSMISSION	18  /* ms */
-#define DHT11_SENSOR_RESPONSE	80000
-#define DHT11_START_BIT		50000
-#define DHT11_DATA_BIT_LOW	27000
-#define DHT11_DATA_BIT_HIGH	70000
+#define DHT11_MIN_TIMERES	34000  /* ns */
+#define DHT11_THRESHOLD		49000  /* ns */
+#define DHT11_AMBIG_LOW		23000  /* ns */
+#define DHT11_AMBIG_HIGH	30000  /* ns */
 
 struct dht11 {
 	struct device			*dev;
@@ -76,43 +96,39 @@ struct dht11 {
 	struct {s64 ts; int value; }	edges[DHT11_EDGES_PER_READ];
 };
 
-static unsigned char dht11_decode_byte(int *timing, int threshold)
+static unsigned char dht11_decode_byte(char *bits)
 {
 	unsigned char ret = 0;
 	int i;
 
 	for (i = 0; i < 8; ++i) {
 		ret <<= 1;
-		if (timing[i] >= threshold)
+		if (bits[i])
 			++ret;
 	}
 
 	return ret;
 }
 
-static int dht11_decode(struct dht11 *dht11, int offset, int timeres)
+static int dht11_decode(struct dht11 *dht11, int offset)
 {
-	int i, t, timing[DHT11_BITS_PER_READ], threshold;
+	int i, t;
+	char bits[DHT11_BITS_PER_READ];
 	unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum;
 
-	threshold = DHT11_DATA_BIT_HIGH / timeres;
-	if (DHT11_DATA_BIT_LOW / timeres + 1 >= threshold)
-		pr_err("dht11: WARNING: decoding ambiguous\n");
-
-	/* scale down with timeres and check validity */
 	for (i = 0; i < DHT11_BITS_PER_READ; ++i) {
 		t = dht11->edges[offset + 2 * i + 2].ts -
 			dht11->edges[offset + 2 * i + 1].ts;
 		if (!dht11->edges[offset + 2 * i + 1].value)
 			return -EIO;  /* lost synchronisation */
-		timing[i] = t / timeres;
+		bits[i] = t > DHT11_THRESHOLD;
 	}
 
-	hum_int = dht11_decode_byte(timing, threshold);
-	hum_dec = dht11_decode_byte(&timing[8], threshold);
-	temp_int = dht11_decode_byte(&timing[16], threshold);
-	temp_dec = dht11_decode_byte(&timing[24], threshold);
-	checksum = dht11_decode_byte(&timing[32], threshold);
+	hum_int = dht11_decode_byte(bits);
+	hum_dec = dht11_decode_byte(&bits[8]);
+	temp_int = dht11_decode_byte(&bits[16]);
+	temp_dec = dht11_decode_byte(&bits[24]);
+	checksum = dht11_decode_byte(&bits[32]);
 
 	if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum)
 		return -EIO;
@@ -161,12 +177,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 			int *val, int *val2, long m)
 {
 	struct dht11 *dht11 = iio_priv(iio_dev);
-	int ret, timeres;
+	int ret, timeres, offset;
 
 	mutex_lock(&dht11->lock);
 	if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_real_ns()) {
 		timeres = ktime_get_resolution_ns();
-		if (DHT11_DATA_BIT_HIGH < 2 * timeres) {
+		if (timeres > DHT11_MIN_TIMERES) {
 			dev_err(dht11->dev, "timeresolution %dns too low\n",
 				timeres);
 			/* In theory a better clock could become available
@@ -176,6 +192,10 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 			ret = -EAGAIN;
 			goto err;
 		}
+		if (timeres > DHT11_AMBIG_LOW && timeres < DHT11_AMBIG_HIGH)
+			dev_warn(dht11->dev,
+				 "timeresolution: %dns - decoding ambiguous\n",
+				 timeres);
 
 		reinit_completion(&dht11->completion);
 
@@ -208,11 +228,14 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 		if (ret < 0)
 			goto err;
 
-		ret = dht11_decode(dht11,
-				   dht11->num_edges == DHT11_EDGES_PER_READ ?
-					DHT11_EDGES_PREAMBLE :
-					DHT11_EDGES_PREAMBLE - 2,
-				timeres);
+		offset = DHT11_EDGES_PREAMBLE +
+				dht11->num_edges - DHT11_EDGES_PER_READ;
+		for (; offset >= 0; --offset) {
+			ret = dht11_decode(dht11, offset);
+			if (!ret)
+				break;
+		}
+
 		if (ret)
 			goto err;
 	}

drivers/iio/humidity/si7005.c

@@ -170,6 +170,7 @@ static int si7005_probe(struct i2c_client *client,
 
 static const struct i2c_device_id si7005_id[] = {
 	{ "si7005", 0 },
+	{ "th02", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, si7005_id);

drivers/iio/humidity/si7020.c

@@ -149,6 +149,7 @@ static int si7020_probe(struct i2c_client *client,
 
 static const struct i2c_device_id si7020_id[] = {
 	{ "si7020", 0 },
+	{ "th06", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, si7020_id);

drivers/iio/imu/inv_mpu6050/inv_mpu_core.c

@@ -727,8 +727,7 @@ static const struct iio_info mpu_info = {
 /**
  *  inv_check_and_setup_chip() - check and setup chip.
  */
-static int inv_check_and_setup_chip(struct inv_mpu6050_state *st,
-		const struct i2c_device_id *id)
+static int inv_check_and_setup_chip(struct inv_mpu6050_state *st)
 {
 	int result;
 
@@ -795,7 +794,7 @@ static int inv_mpu_probe(struct i2c_client *client,
 	if (pdata)
 		st->plat_data = *pdata;
 	/* power is turned on inside check chip type*/
-	result = inv_check_and_setup_chip(st, id);
+	result = inv_check_and_setup_chip(st);
 	if (result)
 		return result;
 

drivers/iio/industrialio-core.c

@@ -77,6 +77,7 @@ static const char * const iio_chan_type_name_spec[] = {
 	[IIO_VELOCITY] = "velocity",
 	[IIO_CONCENTRATION] = "concentration",
 	[IIO_RESISTANCE] = "resistance",
+	[IIO_PH] = "ph",
 };
 
 static const char * const iio_modifier_names[] = {

drivers/iio/light/opt3001.c

@@ -65,19 +65,25 @@
 #define OPT3001_REG_EXPONENT(n)		((n) >> 12)
 #define OPT3001_REG_MANTISSA(n)		((n) & 0xfff)
 
+#define OPT3001_INT_TIME_LONG		800000
+#define OPT3001_INT_TIME_SHORT		100000
+
 /*
  * Time to wait for conversion result to be ready. The device datasheet
- * worst-case max value is 880ms. Add some slack to be on the safe side.
+ * sect. 6.5 states results are ready after total integration time plus 3ms.
+ * This results in worst-case max values of 113ms or 883ms, respectively.
+ * Add some slack to be on the safe side.
  */
-#define OPT3001_RESULT_READY_TIMEOUT	msecs_to_jiffies(1000)
+#define OPT3001_RESULT_READY_SHORT	150
+#define OPT3001_RESULT_READY_LONG	1000
 
 struct opt3001 {
 	struct i2c_client	*client;
 	struct device		*dev;
 
 	struct mutex		lock;
-	u16			ok_to_ignore_lock:1;
-	u16			result_ready:1;
+	bool			ok_to_ignore_lock;
+	bool			result_ready;
 	wait_queue_head_t	result_ready_queue;
 	u16			result;
 
@@ -89,6 +95,8 @@ struct opt3001 {
 
 	u8			high_thresh_exp;
 	u8			low_thresh_exp;
+
+	bool			use_irq;
 };
 
 struct opt3001_scale {
@@ -227,26 +235,30 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
 	u16 reg;
 	u8 exponent;
 	u16 value;
+	long timeout;
 
-	/*
-	 * Enable the end-of-conversion interrupt mechanism. Note that doing
-	 * so will overwrite the low-level limit value however we will restore
-	 * this value later on.
-	 */
-	ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT,
-			OPT3001_LOW_LIMIT_EOC_ENABLE);
-	if (ret < 0) {
-		dev_err(opt->dev, "failed to write register %02x\n",
-				OPT3001_LOW_LIMIT);
-		return ret;
+	if (opt->use_irq) {
+		/*
+		 * Enable the end-of-conversion interrupt mechanism. Note that
+		 * doing so will overwrite the low-level limit value however we
+		 * will restore this value later on.
+		 */
+		ret = i2c_smbus_write_word_swapped(opt->client,
+					OPT3001_LOW_LIMIT,
+					OPT3001_LOW_LIMIT_EOC_ENABLE);
+		if (ret < 0) {
+			dev_err(opt->dev, "failed to write register %02x\n",
+					OPT3001_LOW_LIMIT);
+			return ret;
+		}
+
+		/* Allow IRQ to access the device despite lock being set */
+		opt->ok_to_ignore_lock = true;
 	}
 
-	/* Reset data-ready indicator flag (will be set in the IRQ routine) */
+	/* Reset data-ready indicator flag */
 	opt->result_ready = false;
 
-	/* Allow IRQ to access the device despite lock being set */
-	opt->ok_to_ignore_lock = true;
-
 	/* Configure for single-conversion mode and start a new conversion */
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
 	if (ret < 0) {
@@ -266,32 +278,69 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
 		goto err;
 	}
 
-	/* Wait for the IRQ to indicate the conversion is complete */
-	ret = wait_event_timeout(opt->result_ready_queue, opt->result_ready,
-			OPT3001_RESULT_READY_TIMEOUT);
+	if (opt->use_irq) {
+		/* Wait for the IRQ to indicate the conversion is complete */
+		ret = wait_event_timeout(opt->result_ready_queue,
+				opt->result_ready,
+				msecs_to_jiffies(OPT3001_RESULT_READY_LONG));
+	} else {
+		/* Sleep for result ready time */
+		timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ?
+			OPT3001_RESULT_READY_SHORT : OPT3001_RESULT_READY_LONG;
+		msleep(timeout);
+
+		/* Check result ready flag */
+		ret = i2c_smbus_read_word_swapped(opt->client,
+						  OPT3001_CONFIGURATION);
+		if (ret < 0) {
+			dev_err(opt->dev, "failed to read register %02x\n",
+				OPT3001_CONFIGURATION);
+			goto err;
+		}
+
+		if (!(ret & OPT3001_CONFIGURATION_CRF)) {
+			ret = -ETIMEDOUT;
+			goto err;
+		}
+
+		/* Obtain value */
+		ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_RESULT);
+		if (ret < 0) {
+			dev_err(opt->dev, "failed to read register %02x\n",
+				OPT3001_RESULT);
+			goto err;
+		}
+		opt->result = ret;
+		opt->result_ready = true;
+	}
 
 err:
-	/* Disallow IRQ to access the device while lock is active */
-	opt->ok_to_ignore_lock = false;
+	if (opt->use_irq)
+		/* Disallow IRQ to access the device while lock is active */
+		opt->ok_to_ignore_lock = false;
 
 	if (ret == 0)
 		return -ETIMEDOUT;
 	else if (ret < 0)
 		return ret;
 
-	/*
-	 * Disable the end-of-conversion interrupt mechanism by restoring the
-	 * low-level limit value (clearing OPT3001_LOW_LIMIT_EOC_ENABLE). Note
-	 * that selectively clearing those enable bits would affect the actual
-	 * limit value due to bit-overlap and therefore can't be done.
-	 */
-	value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa;
-	ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT,
-			value);
-	if (ret < 0) {
-		dev_err(opt->dev, "failed to write register %02x\n",
-				OPT3001_LOW_LIMIT);
-		return ret;
+	if (opt->use_irq) {
+		/*
+		 * Disable the end-of-conversion interrupt mechanism by
+		 * restoring the low-level limit value (clearing
+		 * OPT3001_LOW_LIMIT_EOC_ENABLE). Note that selectively clearing
+		 * those enable bits would affect the actual limit value due to
+		 * bit-overlap and therefore can't be done.
+		 */
+		value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa;
+		ret = i2c_smbus_write_word_swapped(opt->client,
+						   OPT3001_LOW_LIMIT,
+						   value);
+		if (ret < 0) {
+			dev_err(opt->dev, "failed to write register %02x\n",
+					OPT3001_LOW_LIMIT);
+			return ret;
+		}
 	}
 
 	exponent = OPT3001_REG_EXPONENT(opt->result);
@@ -325,13 +374,13 @@ static int opt3001_set_int_time(struct opt3001 *opt, int time)
 	reg = ret;
 
 	switch (time) {
-	case 100000:
+	case OPT3001_INT_TIME_SHORT:
 		reg &= ~OPT3001_CONFIGURATION_CT;
-		opt->int_time = 100000;
+		opt->int_time = OPT3001_INT_TIME_SHORT;
 		break;
-	case 800000:
+	case OPT3001_INT_TIME_LONG:
 		reg |= OPT3001_CONFIGURATION_CT;
-		opt->int_time = 800000;
+		opt->int_time = OPT3001_INT_TIME_LONG;
 		break;
 	default:
 		return -EINVAL;
@@ -597,9 +646,9 @@ static int opt3001_configure(struct opt3001 *opt)
 
 	/* Reflect status of the device's integration time setting */
 	if (reg & OPT3001_CONFIGURATION_CT)
-		opt->int_time = 800000;
+		opt->int_time = OPT3001_INT_TIME_LONG;
 	else
-		opt->int_time = 100000;
+		opt->int_time = OPT3001_INT_TIME_SHORT;
 
 	/* Ensure device is in shutdown initially */
 	opt3001_set_mode(opt, &reg, OPT3001_CONFIGURATION_M_SHUTDOWN);
@@ -733,12 +782,18 @@ static int opt3001_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	ret = request_threaded_irq(irq, NULL, opt3001_irq,
-			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-			"opt3001", iio);
-	if (ret) {
-		dev_err(dev, "failed to request IRQ #%d\n", irq);
-		return ret;
+	/* Make use of INT pin only if valid IRQ no. is given */
+	if (irq > 0) {
+		ret = request_threaded_irq(irq, NULL, opt3001_irq,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"opt3001", iio);
+		if (ret) {
+			dev_err(dev, "failed to request IRQ #%d\n", irq);
+			return ret;
+		}
+		opt->use_irq = true;
+	} else {
+		dev_dbg(opt->dev, "enabling interrupt-less operation\n");
 	}
 
 	return 0;
@@ -751,7 +806,8 @@ static int opt3001_remove(struct i2c_client *client)
 	int ret;
 	u16 reg;
 
-	free_irq(client->irq, iio);
+	if (opt->use_irq)
+		free_irq(client->irq, iio);
 
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
 	if (ret < 0) {

drivers/iio/magnetometer/ak8975.c

@@ -252,7 +252,7 @@ struct ak_def {
 	u8 data_regs[3];
 };
 
-static struct ak_def ak_def_array[AK_MAX_TYPE] = {
+static const struct ak_def ak_def_array[AK_MAX_TYPE] = {
 	{
 		.type = AK8975,
 		.raw_to_gauss = ak8975_raw_to_gauss,
@@ -360,7 +360,7 @@ static struct ak_def ak_def_array[AK_MAX_TYPE] = {
  */
 struct ak8975_data {
 	struct i2c_client	*client;
-	struct ak_def		*def;
+	const struct ak_def	*def;
 	struct attribute_group	attrs;
 	struct mutex		lock;
 	u8			asa[3];

drivers/iio/magnetometer/st_magn_core.c

@@ -175,6 +175,8 @@
 #define ST_MAGN_3_BDU_MASK			0x10
 #define ST_MAGN_3_DRDY_IRQ_ADDR			0x62
 #define ST_MAGN_3_DRDY_INT_MASK			0x01
+#define ST_MAGN_3_IHL_IRQ_ADDR			0x63
+#define ST_MAGN_3_IHL_IRQ_MASK			0x04
 #define ST_MAGN_3_FS_AVL_15000_GAIN		1500
 #define ST_MAGN_3_MULTIREAD_BIT			false
 #define ST_MAGN_3_OUT_X_L_ADDR			0x68
@@ -480,6 +482,8 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
 		.drdy_irq = {
 			.addr = ST_MAGN_3_DRDY_IRQ_ADDR,
 			.mask_int1 = ST_MAGN_3_DRDY_INT_MASK,
+			.addr_ihl = ST_MAGN_3_IHL_IRQ_ADDR,
+			.mask_ihl = ST_MAGN_3_IHL_IRQ_MASK,
 		},
 		.multi_read_bit = ST_MAGN_3_MULTIREAD_BIT,
 		.bootime = 2,

drivers/iio/pressure/Kconfig

@@ -10,11 +10,11 @@ config BMP280
 	depends on I2C
 	select REGMAP_I2C
 	help
-	 Say yes here to build support for Bosch Sensortec BMP280
-	 pressure and temperature sensor.
+	  Say yes here to build support for Bosch Sensortec BMP280
+	  pressure and temperature sensor.
 
-	 To compile this driver as a module, choose M here: the module
-	 will be called bmp280.
+	  To compile this driver as a module, choose M here: the module
+	  will be called bmp280.
 
 config HID_SENSOR_PRESS
 	depends on HID_SENSOR_HUB
@@ -27,18 +27,33 @@ config HID_SENSOR_PRESS
 	  Say yes here to build support for the HID SENSOR
 	  Pressure driver
 
-          To compile this driver as a module, choose M here: the module
-          will be called hid-sensor-press.
+	  To compile this driver as a module, choose M here: the module
+	  will be called hid-sensor-press.
 
 config MPL115
+	tristate
+
+config MPL115_I2C
 	tristate "Freescale MPL115A2 pressure sensor driver"
 	depends on I2C
+	select MPL115
 	help
 	  Say yes here to build support for the Freescale MPL115A2
 	  pressure sensor connected via I2C.
 
-          To compile this driver as a module, choose M here: the module
-          will be called mpl115.
+	  To compile this driver as a module, choose M here: the module
+	  will be called mpl115_i2c.
+
+config MPL115_SPI
+	tristate "Freescale MPL115A1 pressure sensor driver"
+	depends on SPI_MASTER
+	select MPL115
+	help
+	  Say yes here to build support for the Freescale MPL115A1
+	  pressure sensor connected via SPI.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mpl115_spi.
 
 config MPL3115
 	tristate "Freescale MPL3115A2 pressure sensor driver"
@@ -49,8 +64,8 @@ config MPL3115
 	  Say yes here to build support for the Freescale MPL3115A2
 	  pressure sensor / altimeter.
 
-          To compile this driver as a module, choose M here: the module
-          will be called mpl3115.
+	  To compile this driver as a module, choose M here: the module
+	  will be called mpl3115.
 
 config MS5611
 	tristate "Measurement Specialties MS5611 pressure sensor driver"
@@ -82,7 +97,7 @@ config MS5611_SPI
 config MS5637
 	tristate "Measurement Specialties MS5637 pressure & temperature sensor"
 	depends on I2C
-        select IIO_MS_SENSORS_I2C
+	select IIO_MS_SENSORS_I2C
 	help
 	  If you say yes here you get support for the Measurement Specialties
 	  MS5637 pressure and temperature sensor.
@@ -128,7 +143,7 @@ config T5403
 	  Say yes here to build support for the EPCOS T5403 pressure sensor
 	  connected via I2C.
 
-          To compile this driver as a module, choose M here: the module
-          will be called t5403.
+	  To compile this driver as a module, choose M here: the module
+	  will be called t5403.
 
 endmenu

drivers/iio/pressure/Makefile

@@ -6,6 +6,8 @@
 obj-$(CONFIG_BMP280) += bmp280.o
 obj-$(CONFIG_HID_SENSOR_PRESS)   += hid-sensor-press.o
 obj-$(CONFIG_MPL115) += mpl115.o
+obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o
+obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o
 obj-$(CONFIG_MPL3115) += mpl3115.o
 obj-$(CONFIG_MS5611) += ms5611_core.o
 obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o

drivers/iio/pressure/mpl115.c

 /*
- * mpl115.c - Support for Freescale MPL115A2 pressure/temperature sensor
+ * mpl115.c - Support for Freescale MPL115A pressure/temperature sensor
  *
  * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
  *
@@ -7,17 +7,16 @@
  * the GNU General Public License.  See the file COPYING in the main
  * directory of this archive for more details.
  *
- * (7-bit I2C slave address 0x60)
- *
  * TODO: shutdown pin
  *
  */
 
 #include <linux/module.h>
-#include <linux/i2c.h>
 #include <linux/iio/iio.h>
 #include <linux/delay.h>
 
+#include "mpl115.h"
+
 #define MPL115_PADC 0x00 /* pressure ADC output value, MSB first, 10 bit */
 #define MPL115_TADC 0x02 /* temperature ADC output value, MSB first, 10 bit */
 #define MPL115_A0 0x04 /* 12 bit integer, 3 bit fraction */
@@ -27,16 +26,18 @@
 #define MPL115_CONVERT 0x12 /* convert temperature and pressure */
 
 struct mpl115_data {
-	struct i2c_client *client;
+	struct device *dev;
 	struct mutex lock;
 	s16 a0;
 	s16 b1, b2;
 	s16 c12;
+	const struct mpl115_ops *ops;
 };
 
 static int mpl115_request(struct mpl115_data *data)
 {
-	int ret = i2c_smbus_write_byte_data(data->client, MPL115_CONVERT, 0);
+	int ret = data->ops->write(data->dev, MPL115_CONVERT, 0);
+
 	if (ret < 0)
 		return ret;
 
@@ -57,12 +58,12 @@ static int mpl115_comp_pressure(struct mpl115_data *data, int *val, int *val2)
 	if (ret < 0)
 		goto done;
 
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_PADC);
+	ret = data->ops->read(data->dev, MPL115_PADC);
 	if (ret < 0)
 		goto done;
 	padc = ret >> 6;
 
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC);
+	ret = data->ops->read(data->dev, MPL115_TADC);
 	if (ret < 0)
 		goto done;
 	tadc = ret >> 6;
@@ -90,7 +91,7 @@ static int mpl115_read_temp(struct mpl115_data *data)
 	ret = mpl115_request(data);
 	if (ret < 0)
 		goto done;
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC);
+	ret = data->ops->read(data->dev, MPL115_TADC);
 done:
 	mutex_unlock(&data->lock);
 	return ret;
@@ -145,66 +146,53 @@ static const struct iio_info mpl115_info = {
 	.driver_module = THIS_MODULE,
 };
 
-static int mpl115_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+int mpl115_probe(struct device *dev, const char *name,
+			const struct mpl115_ops *ops)
 {
 	struct mpl115_data *data;
 	struct iio_dev *indio_dev;
 	int ret;
 
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
-
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	data = iio_priv(indio_dev);
-	data->client = client;
+	data->dev = dev;
+	data->ops = ops;
 	mutex_init(&data->lock);
 
-	i2c_set_clientdata(client, indio_dev);
 	indio_dev->info = &mpl115_info;
-	indio_dev->name = id->name;
-	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = name;
+	indio_dev->dev.parent = dev;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = mpl115_channels;
 	indio_dev->num_channels = ARRAY_SIZE(mpl115_channels);
 
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_A0);
+	ret = data->ops->init(data->dev);
+	if (ret)
+		return ret;
+
+	ret = data->ops->read(data->dev, MPL115_A0);
 	if (ret < 0)
 		return ret;
 	data->a0 = ret;
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_B1);
+	ret = data->ops->read(data->dev, MPL115_B1);
 	if (ret < 0)
 		return ret;
 	data->b1 = ret;
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_B2);
+	ret = data->ops->read(data->dev, MPL115_B2);
 	if (ret < 0)
 		return ret;
 	data->b2 = ret;
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_C12);
+	ret = data->ops->read(data->dev, MPL115_C12);
 	if (ret < 0)
 		return ret;
 	data->c12 = ret;
 
-	return devm_iio_device_register(&client->dev, indio_dev);
+	return devm_iio_device_register(dev, indio_dev);
 }
-
-static const struct i2c_device_id mpl115_id[] = {
-	{ "mpl115", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, mpl115_id);
-
-static struct i2c_driver mpl115_driver = {
-	.driver = {
-		.name	= "mpl115",
-	},
-	.probe = mpl115_probe,
-	.id_table = mpl115_id,
-};
-module_i2c_driver(mpl115_driver);
+EXPORT_SYMBOL_GPL(mpl115_probe);
 
 MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
 MODULE_DESCRIPTION("Freescale MPL115 pressure/temperature driver");

drivers/iio/pressure/mpl115.h

+/*
+ * Freescale MPL115A pressure/temperature sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ */
+
+#ifndef _MPL115_H_
+#define _MPL115_H_
+
+struct mpl115_ops {
+	int (*init)(struct device *);
+	int (*read)(struct device *, u8);
+	int (*write)(struct device *, u8, u8);
+};
+
+int mpl115_probe(struct device *dev, const char *name,
+			const struct mpl115_ops *ops);
+
+#endif

drivers/iio/pressure/mpl115_i2c.c

+/*
+ * Freescale MPL115A2 pressure/temperature sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * (7-bit I2C slave address 0x60)
+ *
+ * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A2.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+
+#include "mpl115.h"
+
+static int mpl115_i2c_init(struct device *dev)
+{
+	return 0;
+}
+
+static int mpl115_i2c_read(struct device *dev, u8 address)
+{
+	return i2c_smbus_read_word_swapped(to_i2c_client(dev), address);
+}
+
+static int mpl115_i2c_write(struct device *dev, u8 address, u8 value)
+{
+	return i2c_smbus_write_byte_data(to_i2c_client(dev), address, value);
+}
+
+static const struct mpl115_ops mpl115_i2c_ops = {
+	.init = mpl115_i2c_init,
+	.read = mpl115_i2c_read,
+	.write = mpl115_i2c_write,
+};
+
+static int mpl115_i2c_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops);
+}
+
+static const struct i2c_device_id mpl115_i2c_id[] = {
+	{ "mpl115", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mpl115_i2c_id);
+
+static struct i2c_driver mpl115_i2c_driver = {
+	.driver = {
+		.name	= "mpl115",
+	},
+	.probe = mpl115_i2c_probe,
+	.id_table = mpl115_i2c_id,
+};
+module_i2c_driver(mpl115_i2c_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("Freescale MPL115A2 pressure/temperature driver");
+MODULE_LICENSE("GPL");

drivers/iio/pressure/mpl115_spi.c

+/*
+ * Freescale MPL115A1 pressure/temperature sensor
+ *
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A1.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include "mpl115.h"
+
+#define MPL115_SPI_WRITE(address)	((address) << 1)
+#define MPL115_SPI_READ(address)	(0x80 | (address) << 1)
+
+struct mpl115_spi_buf {
+	u8 tx[4];
+	u8 rx[4];
+};
+
+static int mpl115_spi_init(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct mpl115_spi_buf *buf;
+
+	buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, buf);
+
+	return 0;
+}
+
+static int mpl115_spi_read(struct device *dev, u8 address)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct mpl115_spi_buf *buf = spi_get_drvdata(spi);
+	struct spi_transfer xfer = {
+		.tx_buf = buf->tx,
+		.rx_buf = buf->rx,
+		.len = 4,
+	};
+	int ret;
+
+	buf->tx[0] = MPL115_SPI_READ(address);
+	buf->tx[2] = MPL115_SPI_READ(address + 1);
+
+	ret = spi_sync_transfer(spi, &xfer, 1);
+	if (ret)
+		return ret;
+
+	return (buf->rx[1] << 8) | buf->rx[3];
+}
+
+static int mpl115_spi_write(struct device *dev, u8 address, u8 value)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct mpl115_spi_buf *buf = spi_get_drvdata(spi);
+	struct spi_transfer xfer = {
+		.tx_buf = buf->tx,
+		.len = 2,
+	};
+
+	buf->tx[0] = MPL115_SPI_WRITE(address);
+	buf->tx[1] = value;
+
+	return spi_sync_transfer(spi, &xfer, 1);
+}
+
+static const struct mpl115_ops mpl115_spi_ops = {
+	.init = mpl115_spi_init,
+	.read = mpl115_spi_read,
+	.write = mpl115_spi_write,
+};
+
+static int mpl115_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+
+	return mpl115_probe(&spi->dev, id->name, &mpl115_spi_ops);
+}
+
+static const struct spi_device_id mpl115_spi_ids[] = {
+	{ "mpl115", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, mpl115_spi_ids);
+
+static struct spi_driver mpl115_spi_driver = {
+	.driver = {
+		.name   = "mpl115",
+	},
+	.probe = mpl115_spi_probe,
+	.id_table = mpl115_spi_ids,
+};
+module_spi_driver(mpl115_spi_driver);
+
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
+MODULE_DESCRIPTION("Freescale MPL115A1 pressure/temperature driver");
+MODULE_LICENSE("GPL");

drivers/iio/pressure/st_pressure_core.c

@@ -62,6 +62,8 @@
 #define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR		0x22
 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK	0x04
 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK	0x20
+#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR		0x22
+#define ST_PRESS_LPS331AP_IHL_IRQ_MASK		0x80
 #define ST_PRESS_LPS331AP_MULTIREAD_BIT		true
 #define ST_PRESS_LPS331AP_TEMP_OFFSET		42500
 
@@ -100,6 +102,8 @@
 #define ST_PRESS_LPS25H_DRDY_IRQ_ADDR		0x23
 #define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK	0x01
 #define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK	0x10
+#define ST_PRESS_LPS25H_IHL_IRQ_ADDR		0x22
+#define ST_PRESS_LPS25H_IHL_IRQ_MASK		0x80
 #define ST_PRESS_LPS25H_MULTIREAD_BIT		true
 #define ST_PRESS_LPS25H_TEMP_OFFSET		42500
 #define ST_PRESS_LPS25H_OUT_XL_ADDR		0x28
@@ -220,6 +224,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
 			.mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
 			.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
+			.addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
+			.mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
 		},
 		.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
 		.bootime = 2,
@@ -304,6 +310,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR,
 			.mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK,
 			.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
+			.addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
+			.mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
 		},
 		.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
 		.bootime = 2,

drivers/staging/iio/Documentation/sysfs-bus-iio-light

-
-What:		/sys/bus/iio/devices/device[n]/range
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Hardware dependent ADC Full Scale Range used for some ambient
-		light sensors in calculating lux.
-
-What:		/sys/bus/iio/devices/device[n]/range_available
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Hardware dependent supported vales for ADC Full Scale Range.
-
-What:		/sys/bus/iio/devices/device[n]/adc_resolution
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Hardware dependent ADC resolution of the ambient light sensor
-		used in calculating the lux.
-
-What:		/sys/bus/iio/devices/device[n]/adc_resolution_available
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Hardware dependent list of possible values supported for the
-		adc_resolution of the given sensor.
-
 What:		/sys/bus/iio/devices/device[n]/in_illuminance0[_input|_raw]
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org

drivers/staging/iio/adc/ad7192.c

@@ -236,7 +236,7 @@ static int ad7192_setup(struct ad7192_state *st,
 			st->mclk = pdata->ext_clk_hz;
 		else
 			st->mclk = AD7192_INT_FREQ_MHZ;
-			break;
+		break;
 	default:
 		ret = -EINVAL;
 		goto out;

drivers/staging/iio/cdc/ad7150.c

@@ -21,8 +21,8 @@
  */
 
 #define AD7150_STATUS              0
-#define AD7150_STATUS_OUT1         (1 << 3)
-#define AD7150_STATUS_OUT2         (1 << 5)
+#define AD7150_STATUS_OUT1         BIT(3)
+#define AD7150_STATUS_OUT2         BIT(5)
 #define AD7150_CH1_DATA_HIGH       1
 #define AD7150_CH2_DATA_HIGH       3
 #define AD7150_CH1_AVG_HIGH        5
@@ -36,7 +36,7 @@
 #define AD7150_CH2_TIMEOUT         13
 #define AD7150_CH2_SETUP           14
 #define AD7150_CFG                 15
-#define AD7150_CFG_FIX             (1 << 7)
+#define AD7150_CFG_FIX             BIT(7)
 #define AD7150_PD_TIMER            16
 #define AD7150_CH1_CAPDAC          17
 #define AD7150_CH2_CAPDAC          18
@@ -160,8 +160,9 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev,
 
 /* lock should be held */
 static int ad7150_write_event_params(struct iio_dev *indio_dev,
-	 unsigned int chan, enum iio_event_type type,
-	 enum iio_event_direction dir)
+				     unsigned int chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir)
 {
 	int ret;
 	u16 value;
@@ -209,8 +210,9 @@ static int ad7150_write_event_params(struct iio_dev *indio_dev,
 }
 
 static int ad7150_write_event_config(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, enum iio_event_type type,
-	enum iio_event_direction dir, int state)
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir, int state)
 {
 	u8 thresh_type, cfg, adaptive;
 	int ret;
@@ -302,11 +304,11 @@ static int ad7150_read_event_value(struct iio_dev *indio_dev,
 }
 
 static int ad7150_write_event_value(struct iio_dev *indio_dev,
-				   const struct iio_chan_spec *chan,
-				   enum iio_event_type type,
-				   enum iio_event_direction dir,
-				   enum iio_event_info info,
-				   int val, int val2)
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int val, int val2)
 {
 	int ret;
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
@@ -365,9 +367,9 @@ static ssize_t ad7150_show_timeout(struct device *dev,
 }
 
 static ssize_t ad7150_store_timeout(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t len)
+				    struct device_attribute *attr,
+				    const char *buf,
+				    size_t len)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
@@ -580,7 +582,7 @@ static const struct iio_info ad7150_info = {
  */
 
 static int ad7150_probe(struct i2c_client *client,
-		const struct i2c_device_id *id)
+			const struct i2c_device_id *id)
 {
 	int ret;
 	struct ad7150_chip_info *chip;

include/linux/iio/common/st_sensors.h

@@ -119,6 +119,8 @@ struct st_sensor_bdu {
  * @addr: address of the register.
  * @mask_int1: mask to enable/disable IRQ on INT1 pin.
  * @mask_int2: mask to enable/disable IRQ on INT2 pin.
+ * @addr_ihl: address to enable/disable active low on the INT lines.
+ * @mask_ihl: mask to enable/disable active low on the INT lines.
  * struct ig1 - represents the Interrupt Generator 1 of sensors.
  * @en_addr: address of the enable ig1 register.
  * @en_mask: mask to write the on/off value for enable.
@@ -127,6 +129,8 @@ struct st_sensor_data_ready_irq {
 	u8 addr;
 	u8 mask_int1;
 	u8 mask_int2;
+	u8 addr_ihl;
+	u8 mask_ihl;
 	struct {
 		u8 en_addr;
 		u8 en_mask;

include/linux/platform_data/ad5761.h

+/*
+ * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter
+ *
+ * Copyright 2016 Qtechnology A/S
+ * 2016 Ricardo Ribalda <ricardo.ribalda@gmail.com>
+ *
+ * Licensed under the GPL-2.
+ */
+#ifndef __LINUX_PLATFORM_DATA_AD5761_H__
+#define __LINUX_PLATFORM_DATA_AD5761_H__
+
+/**
+ * enum ad5761_voltage_range - Voltage range the AD5761 is configured for.
+ * @AD5761_VOLTAGE_RANGE_M10V_10V:  -10V to  10V
+ * @AD5761_VOLTAGE_RANGE_0V_10V:      0V to  10V
+ * @AD5761_VOLTAGE_RANGE_M5V_5V:     -5V to   5V
+ * @AD5761_VOLTAGE_RANGE_0V_5V:       0V to   5V
+ * @AD5761_VOLTAGE_RANGE_M2V5_7V5: -2.5V to 7.5V
+ * @AD5761_VOLTAGE_RANGE_M3V_3V:     -3V to   3V
+ * @AD5761_VOLTAGE_RANGE_0V_16V:      0V to  16V
+ * @AD5761_VOLTAGE_RANGE_0V_20V:      0V to  20V
+ */
+
+enum ad5761_voltage_range {
+	AD5761_VOLTAGE_RANGE_M10V_10V,
+	AD5761_VOLTAGE_RANGE_0V_10V,
+	AD5761_VOLTAGE_RANGE_M5V_5V,
+	AD5761_VOLTAGE_RANGE_0V_5V,
+	AD5761_VOLTAGE_RANGE_M2V5_7V5,
+	AD5761_VOLTAGE_RANGE_M3V_3V,
+	AD5761_VOLTAGE_RANGE_0V_16V,
+	AD5761_VOLTAGE_RANGE_0V_20V,
+};
+
+/**
+ * struct ad5761_platform_data - AD5761 DAC driver platform data
+ * @voltage_range: Voltage range the AD5761 is configured for
+ */
+
+struct ad5761_platform_data {
+	enum ad5761_voltage_range voltage_range;
+};
+
+#endif

include/uapi/linux/iio/types.h

@@ -37,6 +37,7 @@ enum iio_chan_type {
 	IIO_VELOCITY,
 	IIO_CONCENTRATION,
 	IIO_RESISTANCE,
+	IIO_PH,
 };
 
 enum iio_modifier {