Commit fed7b888 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] doc-rst: improve DTV_BANDWIDTH_HZ notes

There are several notes for this DTV property. Some are
outdated, so take some care of it, making it updated.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 5632442d
...@@ -219,23 +219,29 @@ Bandwidth for the channel, in HZ. ...@@ -219,23 +219,29 @@ Bandwidth for the channel, in HZ.
Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``, Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``,
``8000000``, ``10000000``. ``8000000``, ``10000000``.
Notes: .. note::
#. DVB-T supports 6, 7 and 8MHz.
#. DVB-T2 supports 1.172, 5, 6, 7, 8 and 10MHz.
1) For ISDB-T it should be always 6000000Hz (6MHz) #. ISDB-T supports 5MHz, 6MHz, 7MHz and 8MHz, although most
places use 6MHz.
2) For ISDB-Tsb it can vary depending on the number of connected #. On DVB-C and DVB-S/S2, the bandwidth depends on the symbol rate.
segments So, the Kernel will silently ignore setting :ref:`DTV-BANDWIDTH-HZ`.
3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth for #. For DVB-C and DVB-S/S2, the Kernel will return an estimation of the
DVB-C depends on the symbol rate bandwidth, calculated from :ref:`DTV-SYMBOL-RATE` and from
the rolloff, with is fixed for DVB-C and DVB-S.
4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from #. For DVB-S2, the bandwidth estimation will use :ref:`DTV-ROLLOFF`.
other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
DTV_ISDBT_SB_SEGMENT_COUNT).
5) DVB-T supports 6, 7 and 8MHz. #. For ISDB-Tsb, it can vary depending on the number of connected
segments.
6) In addition, DVB-T2 supports 1.172, 5 and 10MHz. #. Bandwidth in ISDB-Tsb can be easily derived from other parameters
(DTV_ISDBT_SB_SEGMENT_IDX, DTV_ISDBT_SB_SEGMENT_COUNT).
.. _DTV-INVERSION: .. _DTV-INVERSION:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment