rtl8180: introduce functions for setting ANAPARAM 2 and 3 params

rtl8180 has one register for analog converters setting ,rtl8185 has
two and rtl8187se has three.
Setting those registers require more than a simple write, and for
one of them a function is already provided.
This patch introduces functions for the other two.
rtl8187se will use them. rtl8185 doesen't yet, but should
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rtl818x/rtl8180/dev.c

@@ -523,6 +523,46 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 	}
 }
 
+static void rtl8180_set_anaparam3(struct rtl8180_priv *priv, u16 anaparam3)
+{
+	u8 reg;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_CONFIG);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite16(priv, &priv->map->ANAPARAM3, anaparam3);
+
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_NORMAL);
+}
+
+void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2)
+{
+	u8 reg;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_CONFIG);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
+
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_NORMAL);
+}
+
 void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
 {
 	u8 reg;

drivers/net/wireless/rtl818x/rtl8180/rtl8180.h

@@ -145,6 +145,7 @@ struct rtl8180_priv {
 
 void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
 void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam);
+void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2);
 
 static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, u8 __iomem *addr)
 {

drivers/net/wireless/rtl818x/rtl8180/rtl8225.c

@@ -282,6 +282,7 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
 
 	msleep(1); /* FIXME: optional? */
 
+	/* TODO: use set_anaparam2 dev.c_func*/
 	/* anaparam2 on */
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);