Commit ff93ec74 authored by Laxman Dewangan's avatar Laxman Dewangan Committed by Linus Walleij

gpio: max77620: Configure interrupt trigger level

The GPIO sub modules of MAX77620 offers to configure the GPIO
interrupt trigger level as RISING and FALLING edge.

Pass this information to regmap-irg when registering for GPIO
interrupts.
Signed-off-by: default avatarLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 8e293fb0
......@@ -27,14 +27,62 @@ struct max77620_gpio {
};
static const struct regmap_irq max77620_gpio_irqs[] = {
REGMAP_IRQ_REG(0, 0, MAX77620_IRQ_LVL2_GPIO_EDGE0),
REGMAP_IRQ_REG(1, 0, MAX77620_IRQ_LVL2_GPIO_EDGE1),
REGMAP_IRQ_REG(2, 0, MAX77620_IRQ_LVL2_GPIO_EDGE2),
REGMAP_IRQ_REG(3, 0, MAX77620_IRQ_LVL2_GPIO_EDGE3),
REGMAP_IRQ_REG(4, 0, MAX77620_IRQ_LVL2_GPIO_EDGE4),
REGMAP_IRQ_REG(5, 0, MAX77620_IRQ_LVL2_GPIO_EDGE5),
REGMAP_IRQ_REG(6, 0, MAX77620_IRQ_LVL2_GPIO_EDGE6),
REGMAP_IRQ_REG(7, 0, MAX77620_IRQ_LVL2_GPIO_EDGE7),
[0] = {
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE0,
.type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
.type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
.type_reg_offset = 0,
},
[1] = {
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE1,
.type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
.type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
.type_reg_offset = 1,
},
[2] = {
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE2,
.type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
.type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
.type_reg_offset = 2,
},
[3] = {
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE3,
.type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
.type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
.type_reg_offset = 3,
},
[4] = {
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE4,
.type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
.type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
.type_reg_offset = 4,
},
[5] = {
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE5,
.type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
.type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
.type_reg_offset = 5,
},
[6] = {
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE6,
.type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
.type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
.type_reg_offset = 6,
},
[7] = {
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE7,
.type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING,
.type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING,
.reg_offset = 0,
.type_reg_offset = 7,
},
};
static struct regmap_irq_chip max77620_gpio_irq_chip = {
......@@ -42,8 +90,11 @@ static struct regmap_irq_chip max77620_gpio_irq_chip = {
.irqs = max77620_gpio_irqs,
.num_irqs = ARRAY_SIZE(max77620_gpio_irqs),
.num_regs = 1,
.num_type_reg = 8,
.irq_reg_stride = 1,
.type_reg_stride = 1,
.status_base = MAX77620_REG_IRQ_LVL2_GPIO,
.type_base = MAX77620_REG_GPIO0,
};
static int max77620_gpio_dir_input(struct gpio_chip *gc, unsigned int offset)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment