spi: dw: Add KeemBay Master capability

In a further commit we'll have to get rid of the update_cr0() callback and
define a DW SSI capability instead. Since Keem Bay master/slave
functionality is controller by the CTRL0 register bitfield, we need to
first move the master mode selection into the internal corresponding
update_cr0 method, which would be activated by means of the dedicated
DW_SPI_CAP_KEEMBAY_MST capability setup.

Note this will be also useful if the driver will be ever altered to
support the DW SPI slave interface.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200920112914.26501-11-Sergey.Semin@baikalelectronics.ruSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-dw-core.c

@@ -258,6 +258,7 @@ u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master,
 			     struct spi_device *spi,
 			     struct spi_transfer *transfer)
 {
+	struct dw_spi *dws = spi_controller_get_devdata(master);
 	struct chip_data *chip = spi_get_ctldata(spi);
 	u32 cr0;
 
@@ -281,6 +282,9 @@ u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master,
 	/* CTRLR0[13] Shift Register Loop */
 	cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DWC_SSI_CTRLR0_SRL_OFFSET;
 
+	if (dws->caps & DW_SPI_CAP_KEEMBAY_MST)
+		cr0 |= DWC_SSI_CTRLR0_KEEMBAY_MST;
+
 	return cr0;
 }
 EXPORT_SYMBOL_GPL(dw_spi_update_cr0_v1_01a);

drivers/spi/spi-dw-mmio.c

@@ -48,13 +48,6 @@ struct dw_spi_mmio {
 #define SPARX5_FORCE_ENA			0xa4
 #define SPARX5_FORCE_VAL			0xa8
 
-/*
- * For Keem Bay, CTRLR0[31] is used to select controller mode.
- * 0: SSI is slave
- * 1: SSI is master
- */
-#define KEEMBAY_CTRLR0_SSIC_IS_MST		BIT(31)
-
 struct dw_spi_mscc {
 	struct regmap       *syscon;
 	void __iomem        *spi_mst; /* Not sparx5 */
@@ -234,20 +227,13 @@ static int dw_spi_dwc_ssi_init(struct platform_device *pdev,
 	return 0;
 }
 
-static u32 dw_spi_update_cr0_keembay(struct spi_controller *master,
-				     struct spi_device *spi,
-				     struct spi_transfer *transfer)
-{
-	u32 cr0 = dw_spi_update_cr0_v1_01a(master, spi, transfer);
-
-	return cr0 | KEEMBAY_CTRLR0_SSIC_IS_MST;
-}
-
 static int dw_spi_keembay_init(struct platform_device *pdev,
 			       struct dw_spi_mmio *dwsmmio)
 {
+	dwsmmio->dws.caps = DW_SPI_CAP_KEEMBAY_MST;
+
 	/* Register hook to configure CTRLR0 */
-	dwsmmio->dws.update_cr0 = dw_spi_update_cr0_keembay;
+	dwsmmio->dws.update_cr0 = dw_spi_update_cr0_v1_01a;
 
 	return 0;
 }

drivers/spi/spi-dw.h

@@ -71,6 +71,13 @@
 #define DWC_SSI_CTRLR0_FRF_OFFSET	6
 #define DWC_SSI_CTRLR0_DFS_OFFSET	0
 
+/*
+ * For Keem Bay, CTRLR0[31] is used to select controller mode.
+ * 0: SSI is slave
+ * 1: SSI is master
+ */
+#define DWC_SSI_CTRLR0_KEEMBAY_MST	BIT(31)
+
 /* Bit fields in SR, 7 bits */
 #define SR_MASK				0x7f		/* cover 7 bits */
 #define SR_BUSY				(1 << 0)
@@ -101,6 +108,7 @@ enum dw_ssi_type {
 
 /* DW SPI capabilities */
 #define DW_SPI_CAP_CS_OVERRIDE		BIT(0)
+#define DW_SPI_CAP_KEEMBAY_MST		BIT(1)
 
 struct dw_spi;
 struct dw_spi_dma_ops {