- 21 Jan, 2020 7 commits
-
-
Miaohe Lin authored
Fix some grammar mistakes in the comments. Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Miaohe Lin authored
Fix some typos and add missing parentheses in the comments. Signed-off-by:
-
Miaohe Lin authored
Since commit b1346ab2 ("KVM: nVMX: Rename prepare_vmcs02_*_full to prepare_vmcs02_*_rare"), prepare_vmcs02_full has been renamed to prepare_vmcs02_rare. nested_vmx_merge_msr_bitmap is renamed to nested_vmx_prepare_msr_bitmap since commit c992384b ("KVM: vmx: speed up MSR bitmap merge"). Signed-off-by:
-
Miaohe Lin authored
Fix some wrong function names in comment. mmu_check_roots is a typo for mmu_check_root, vmcs_read_any should be vmcs12_read_any and so on. Signed-off-by:
-
Miaohe Lin authored
check kvm_pit outside kvm_vm_ioctl_reinject() to keep codestyle consistent with other kvm_pit func and prepare for futher cleanups. Signed-off-by:
-
Wanpeng Li authored
This patch optimizes redundancy logic before fixed mode ipi is delivered in the fast path, broadcast handling needs to go slow path, so the delivery mode repair can be delayed to before slow path. Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
-
Wanpeng Li authored
ICR and TSCDEADLINE MSRs write cause the main MSRs write vmexits in our product observation, multicast IPIs are not as common as unicast IPI like RESCHEDULE_VECTOR and CALL_FUNCTION_SINGLE_VECTOR etc. This patch introduce a mechanism to handle certain performance-critical WRMSRs in a very early stage of KVM VMExit handler. This mechanism is specifically used for accelerating writes to x2APIC ICR that attempt to send a virtual IPI with physical destination-mode, fixed delivery-mode and single target. Which was found as one of the main causes of VMExits for Linux workloads. The reason this mechanism significantly reduce the latency of such virtual IPIs is by sending the physical IPI to the target vCPU in a very early stage of KVM VMExit handler, before host interrupts are enabled and before expensive operations such as reacquiring KVM’s SRCU lock. Latency is reduced even more when KVM is able to use APICv posted-interrupt mechanism (which allows to deliver the virtual IPI directly to target vCPU without the need to kick it to host). Testing on Xeon Skylake server: The virtual IPI latency from sender send to receiver receive reduces more than 200+ cpu cycles. Reviewed-by:
Liran Alon <liran.alon@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
- 08 Jan, 2020 33 commits
-
-
Sean Christopherson authored
WARN if root_hpa is invalid when handling a page fault. The check on root_hpa exists for historical reasons that no longer apply to the current KVM code base. Remove an equivalent debug-only warning in direct_page_fault(), whose existence more or less confirms that root_hpa should always be valid when handling a page fault. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Sean Christopherson authored
WARN on the existing invalid root_hpa checks in __direct_map() and FNAME(fetch). The "legitimate" path that invalidated root_hpa in the middle of a page fault is long since gone, i.e. it should no longer be impossible to invalidate in the middle of a page fault[*]. The root_hpa checks were added by two related commits 989c6b34 ("KVM: MMU: handle invalid root_hpa at __direct_map") 37f6a4e2 ("KVM: x86: handle invalid root_hpa everywhere") to fix a bug where nested_vmx_vmexit() could be called *in the middle* of a page fault. At the time, vmx_interrupt_allowed(), which was and still is used by kvm_can_do_async_pf() via ->interrupt_allowed(), directly invoked nested_vmx_vmexit() to switch from L2 to L1 to emulate a VM-Exit on a pending interrupt. Emulating the nested VM-Exit resulted in root_hpa being invalidated by kvm_mmu_reset_context() without explicitly terminating the page fault. Now that root_hpa is checked for validity by kvm_mmu_page_fault(), WARN on an invalid root_hpa to detect any flows that reset the MMU while handling a page fault. The broken vmx_interrupt_allowed() behavior has long since been fixed and resetting the MMU during a page fault should not be considered legal behavior. [*] It's actually technically possible in FNAME(page_fault)() because it calls inject_page_fault() when the guest translation is invalid, but in that case the page fault handling is immediately terminated. Signed-off-by:
-
Sean Christopherson authored
Add a check on root_hpa at the beginning of the page fault handler to consolidate several checks on root_hpa that are scattered throughout the page fault code. This is a preparatory step towards eventually removing such checks altogether, or at the very least WARNing if an invalid root is encountered. Remove only the checks that can be easily audited to confirm that root_hpa cannot be invalidated between their current location and the new check in kvm_mmu_page_fault(), and aren't currently protected by mmu_lock, i.e. keep the checks in __direct_map() and FNAME(fetch) for the time being. The root_hpa checks that are consolidate were all added by commit 37f6a4e2 ("KVM: x86: handle invalid root_hpa everywhere") which was a follow up to a bug fix for __direct_map(), commit 989c6b34 ("KVM: MMU: handle invalid root_hpa at __direct_map") At the time, nested VMX had, in hindsight, crazy handling of nested interrupts and would trigger a nested VM-Exit in ->interrupt_allowed(), and thus unexpectedly reset the MMU in flows such as can_do_async_pf(). Now that the wonky nested VM-Exit behavior is gone, the root_hpa checks are bogus and confusing, e.g. it's not at all obvious what they actually protect against, and at first glance they appear to be broken since many of them run without holding mmu_lock. Signed-off-by:
-
Sean Christopherson authored
Move the calls to thp_adjust() down a level from the page fault handlers to the map/fetch helpers and remove the page count shuffling done in thp_adjust(). Despite holding a reference to the underlying page while processing a page fault, the page fault flows don't actually rely on holding a reference to the page when thp_adjust() is called. At that point, the fault handlers hold mmu_lock, which prevents mmu_notifier from completing any invalidations, and have verified no invalidations from mmu_notifier have occurred since the page reference was acquired (which is done prior to taking mmu_lock). The kvm_release_pfn_clean()/kvm_get_pfn() dance in thp_adjust() is a quirk that is necessitated because thp_adjust() modifies the pfn that is consumed by its caller. Because the page fault handlers call kvm_release_pfn_clean() on said pfn, thp_adjust() needs to transfer the reference to the correct pfn purely for correctness when the pfn is released. Calling thp_adjust() from __direct_map() and FNAME(fetch) means the pfn adjustment doesn't change the pfn as seen by the page fault handlers, i.e. the pfn released by the page fault handlers is the same pfn that was returned by gfn_to_pfn(). Signed-off-by:
-
Sean Christopherson authored
Move thp_adjust() above __direct_map() in preparation of calling thp_adjust() from __direct_map() and FNAME(fetch). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Consolidate the direct MMU page fault handlers into a common helper, direct_page_fault(). Except for unique max level conditions, the tdp and nonpaging fault handlers are functionally identical. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Rename __direct_map()'s param that controls whether or not a disallowed NX large page should be accounted to match what it actually does. The nonpaging_page_fault() case unconditionally passes %false for the param even though it locally sets lpage_disallowed. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Persist the max page level calculated via gfn_lpage_is_disallowed() to the max level "returned" by mapping_level() so that its naturally taken into account by the max level check that conditions calling transparent_hugepage_adjust(). Drop the gfn_lpage_is_disallowed() check in thp_adjust() as it's now handled by mapping_level() and its callers. Add a comment to document the behavior of host_mapping_level() and its interaction with max level and transparent huge pages. Note, transferring the gfn_lpage_is_disallowed() from thp_adjust() to mapping_level() superficially affects how changes to a memslot's disallow_lpage count will be handled due to thp_adjust() being run while holding mmu_lock. In the more common case where a different vCPU increments the count via account_shadowed(), gfn_lpage_is_disallowed() is rechecked by set_spte() to ensure a writable large page isn't created. In the less common case where the count is decremented to zero due to all shadow pages in the memslot being zapped, THP behavior now matches hugetlbfs behavior in the sense that a small page will be created when a large page could be used if the count reaches zero in the miniscule window between mapping_level() and acquiring mmu_lock. Lastly, the new THP behavior also follows hugetlbfs behavior in the absurdly unlikely scenario of a memslot being moved such that the memslot's compatibility with respect to large pages changes, but without changing the validity of the gpf->pfn walk. I.e. if a memslot is moved between mapping_level() and snapshotting mmu_seq, it's theoretically possible to consume a stale disallow_lpage count. But, since KVM zaps all shadow pages when moving a memslot and forces all vCPUs to reload a new MMU, the inserted spte will always be thrown away prior to completing the memslot move, i.e. whether or not the spte accurately reflects disallow_lpage is irrelevant. Signed-off-by:
-
Sean Christopherson authored
Restrict the max level for a shadow page based on the guest's level instead of capping the level after the fact for host-mapped huge pages, e.g. hugetlbfs pages. Explicitly capping the max level using the guest mapping level also eliminates FNAME(page_fault)'s subtle dependency on THP only supporting 2mb pages. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Refactor the page fault handlers and mapping_level() to track the max allowed page level instead of only tracking if a 4k page is mandatory due to one restriction or another. This paves the way for cleanly consolidating tdp_page_fault() and nonpaging_page_fault(), and for eliminating a redundant check on mmu_gfn_lpage_is_disallowed(). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Invert the loop which adjusts the allowed page level based on what's compatible with the associated memslot to use a largest-to-smallest page size walk. This paves the way for passing around a "max level" variable instead of having redundant checks and/or multiple booleans. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Pre-calculate the max level for a TDP page with respect to MTRR cache consistency in preparation of replacing force_pt_level with max_level, and eventually combining the bulk of nonpaging_page_fault() and tdp_page_fault() into a common helper. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move nonpaging_page_fault() below try_async_pf() to eliminate the forward declaration of try_async_pf() and to prepare for combining the bulk of nonpaging_page_fault() and tdp_page_fault() into a common helper. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Fold nonpaging_map() into its sole caller, nonpaging_page_fault(), in preparation for combining the bulk of nonpaging_page_fault() and tdp_page_fault() into a common helper. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move make_mmu_pages_available() above its first user to put it closer to related code and eliminate a forward declaration. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
WARN once in kvm_load_guest_fpu() if TIF_NEED_FPU_LOAD is observed, as that would mean that KVM is corrupting userspace's FPU by saving unknown register state into arch.user_fpu. Add a comment to explain why KVM WARNs on TIF_NEED_FPU_LOAD instead of implementing logic similar to fpu__copy(). Signed-off-by:
-
Sean Christopherson authored
Unlike most state managed by XSAVE, MPX is initialized to zero on INIT. Because INITs are usually recognized in the context of a VCPU_RUN call, kvm_vcpu_reset() puts the guest's FPU so that the FPU state is resident in memory, zeros the MPX state, and reloads FPU state to hardware. But, in the unlikely event that an INIT is recognized during kvm_arch_vcpu_ioctl_get_mpstate() via kvm_apic_accept_events(), kvm_vcpu_reset() will call kvm_put_guest_fpu() without a preceding kvm_load_guest_fpu() and corrupt the guest's FPU state (and possibly userspace's FPU state as well). Given that MPX is being removed from the kernel[*], fix the bug with the simple-but-ugly approach of loading the guest's FPU during KVM_GET_MP_STATE. [*] See commit f240652b ("x86/mpx: Remove MPX APIs"). Fixes: f775b13e ("x86,kvm: move qemu/guest FPU switching out to vcpu_run") Cc: stable@vger.kernel.org Signed-off-by:
-
Miaohe Lin authored
Use out_err jump label to handle resource release. It's a good practice to release resource in one place and help eliminate some duplicated code. Signed-off-by:
-
Miaohe Lin authored
Use out_err jump label to handle resource release. It's a good practice to release resource in one place and help eliminate some duplicated code. Signed-off-by:
-
Zenghui Yu authored
There are two declarations of kvm_vcpu_kick() in kvm_host.h where one of them is redundant. Remove to keep the git grep a bit cleaner. Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Jim Mattson authored
Apply reverse fir tree declaration order, shorten some variable names to avoid line wrap, reformat a block comment, delete an extra blank line, and use BIT(10) instead of (1u << 10). Signed-off-by:
Jim Mattson <jmattson@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by:
Peter Shier <pshier@google.com> Reviewed-by:
Oliver Upton <oupton@google.com> Reviewed-by:
Jon Cargille <jcargill@google.com> Signed-off-by:
-
Jim Mattson authored
According to the SDM, VMWRITE checks to see if the secondary source operand corresponds to an unsupported VMCS field before it checks to see if the secondary source operand corresponds to a VM-exit information field and the processor does not support writing to VM-exit information fields. Fixes: 49f705c5 ("KVM: nVMX: Implement VMREAD and VMWRITE") Signed-off-by:
-
Jim Mattson authored
According to the SDM, a VMWRITE in VMX non-root operation with an invalid VMCS-link pointer results in VMfailInvalid before the validity of the VMCS field in the secondary source operand is checked. For consistency, modify both handle_vmwrite and handle_vmread, even though there was no problem with the latter. Fixes: 6d894f49 ("KVM: nVMX: vmread/vmwrite: Use shadow vmcs12 if running L2") Signed-off-by:
-
Xiaoyao Li authored
The mis-spelling is found by checkpatch.pl, so fix them. Signed-off-by:
Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by:
-
Xiaoyao Li authored
Rename the NMI-window exiting related definitions to match the latest Intel SDM. No functional changes. Signed-off-by:
-
Xiaoyao Li authored
Rename interrupt-windown exiting related definitions to match the latest Intel SDM. No functional changes. Signed-off-by:
-
Miaohe Lin authored
Fix some typos in comment. Signed-off-by:
-
Peter Xu authored
Change the last users of "shorthand = 0" to use APIC_DEST_NOSHORT. Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
Peter Xu authored
Callers of kvm_apic_match_dest() should always pass in APIC_DEST_* macros for either dest_mode and short_hand parameters. Fix up all the callers of kvm_apic_match_dest() that are not following the rule. Since at it, rename the parameter from short_hand to shorthand in kvm_apic_match_dest(), as suggested by Vitaly. Reported-by:
-
Peter Xu authored
We have both APIC_SHORT_MASK and KVM_APIC_SHORT_MASK defined for the shorthand mask. Similarly, we have both APIC_DEST_MASK and KVM_APIC_DEST_MASK defined for the destination mode mask. Drop the KVM_APIC_* macros and replace the only user of them to use the APIC_DEST_* macros instead. At the meantime, move APIC_SHORT_MASK and APIC_DEST_MASK from lapic.c to lapic.h. Reviewed-by:
-
Peter Xu authored
We were using either APIC_DEST_PHYSICAL|APIC_DEST_LOGICAL or 0|1 to fill in kvm_lapic_irq.dest_mode. It's fine only because in most cases when we check against dest_mode it's against APIC_DEST_PHYSICAL (which equals to 0). However, that's not consistent. We'll have problem when we want to start checking against APIC_DEST_LOGICAL, which does not equals to 1. This patch firstly introduces kvm_lapic_irq_dest_mode() helper to take any boolean of destination mode and return the APIC_DEST_* macro. Then, it replaces the 0|1 settings of irq.dest_mode with the helper. Signed-off-by:
-
Peter Xu authored
kvm_apic_match_dest() is declared in both ioapic.h and lapic.h. Remove the declaration in ioapic.h. kvm_apic_compare_prio() is declared in ioapic.h but defined in lapic.c. Move the declaration to lapic.h. kvm_irq_delivery_to_apic() is declared in ioapic.h but defined in irq_comm.c. Move the declaration to irq.h. hyperv.c needs to use kvm_irq_delivery_to_apic(). Include irq.h in hyperv.c. Reviewed-by:
-
