Skip to content

L
linux
Switch branch/tag
  1. 01 Feb, 2015 1 commit
    • Linus Torvalds's avatar
      sched: don't cause task state changes in nested sleep debugging · 00845eb9
      Linus Torvalds authored 
      Commit 8eb23b9f ("sched: Debug nested sleeps") added code to report
on nested sleep conditions, which we generally want to avoid because the
inner sleeping operation can re-set the thread state to TASK_RUNNING,
but that will then cause the outer sleep loop not actually sleep when it
calls schedule.

However, that's actually valid traditional behavior, with the inner
sleep being some fairly rare case (like taking a sleeping lock that
normally doesn't actually need to sleep).

And the debug code would actually change the state of the task to
TASK_RUNNING internally, which makes that kind of traditional and
working code not work at all, because now the nested sleep doesn't just
sometimes cause the outer one to not block, but will cause it to happen
every time.

In particular, it will cause the cardbus kernel daemon (pccardd) to
basically busy-loop doing scheduling, converting a laptop into a heater,
as reported by Bruno Prémont.  But there may be other legacy uses of
that nested sleep model in other drivers that are also likely to never
get converted to the new model.

This fixes both cases:

 - don't set TASK_RUNNING when the nested condition happens (note: even
   if WARN_ONCE() only _warns_ once, the return value isn't whether the
   warning happened, but whether the condition for the warning was true.
   So despite the warning only happening once, the "if (WARN_ON(..))"
   would trigger for every nested sleep.

 - in the cases where we knowingly disable the warning by using
   "sched_annotate_sleep()", don't change the task state (that is used
   for all core scheduling decisions), instead use '->task_state_change'
   that is used for the debugging decision itself.

(Credit for the second part of the fix goes to Oleg Nesterov: "Can't we
avoid this subtle change in behaviour DEBUG_ATOMIC_SLEEP adds?" with the
suggested change to use 'task_state_change' as part of the test)
Reported-and-bisected-by: default avatarBruno Prémont <bonbons@linux-vserver.org>
Tested-by: default avatarRafael J Wysocki <rjw@rjwysocki.net>
Acked-by: default avatarOleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Cc: Ilya Dryomov <ilya.dryomov@inktank.com>,
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>,
Cc: Davidlohr Bueso <dave@stgolabs.net>,
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      00845eb9
  3. 31 Jan, 2015 4 commits
  5. 30 Jan, 2015 12 commits
  7. 29 Jan, 2015 10 commits
    • Linus Torvalds's avatar
      Merge tag 'dm-3.19-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm · 1c999c47
      Linus Torvalds authored 
      Pull device mapper fixes from Mike Snitzer:
 "One stable fix for a dm-cache 3.19-rc6 regression and one stable fix
  for dm-thin:

   - fix DM cache metadata open/lookup error paths to properly use
     ERR_PTR and IS_ERR (fixes: 3.19-rc6 "stable" commit 9b1cc9f2)

   - fix DM thin-provisioning to disallow userspace from sending
     messages to the thin-pool if the pool is in READ_ONLY or FAIL mode
     since no metadata changes are allowed in these modes"

* tag 'dm-3.19-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: don't allow messages to be sent to a pool target in READ_ONLY or FAIL mode
  dm cache: fix missing ERR_PTR returns and handling
      1c999c47
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-3.19-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · 353a0c6f
      Linus Torvalds authored 
      Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

   - Stable fix for a NFSv4.1 Oops on mount
   - Stable fix for an O_DIRECT deadlock condition
   - Fix an issue with submounted volumes and fake duplicate inode
     numbers"

* tag 'nfs-for-3.19-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix use of nfs_attr_use_mounted_on_fileid()
  NFSv4.1: Fix an Oops in nfs41_walk_client_list
  nfs: fix dio deadlock when O_DIRECT flag is flipped
      353a0c6f
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client · 884e00f3
      Linus Torvalds authored 
      Pull Ceph fixes from Sage Weil:
 "These paches from Ilya finally squash a race condition with layered
  images that he's been chasing for a while"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: drop parent_ref in rbd_dev_unprobe() unconditionally
  rbd: fix rbd_dev_parent_get() when parent_overlap == 0
      884e00f3
    • Marc Zyngier's avatar
      arm/arm64: KVM: Use kernel mapping to perform invalidation on page fault · 0d3e4d4f
      Marc Zyngier authored 
      When handling a fault in stage-2, we need to resync I$ and D$, just
to be sure we don't leave any old cache line behind.

That's very good, except that we do so using the *user* address.
Under heavy load (swapping like crazy), we may end up in a situation
where the page gets mapped in stage-2 while being unmapped from
userspace by another CPU.

At that point, the DC/IC instructions can generate a fault, which
we handle with kvm->mmu_lock held. The box quickly deadlocks, user
is unhappy.

Instead, perform this invalidation through the kernel mapping,
which is guaranteed to be present. The box is much happier, and so
am I.
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      0d3e4d4f
    • Marc Zyngier's avatar
      arm/arm64: KVM: Invalidate data cache on unmap · 363ef89f
      Marc Zyngier authored 
      Let's assume a guest has created an uncached mapping, and written
to that page. Let's also assume that the host uses a cache-coherent
IO subsystem. Let's finally assume that the host is under memory
pressure and starts to swap things out.

Before this "uncached" page is evicted, we need to make sure
we invalidate potential speculated, clean cache lines that are
sitting there, or the IO subsystem is going to swap out the
cached view, loosing the data that has been written directly
into memory.
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      363ef89f
    • Marc Zyngier's avatar
      arm/arm64: KVM: Use set/way op trapping to track the state of the caches · 3c1e7165
      Marc Zyngier authored 
      Trying to emulate the behaviour of set/way cache ops is fairly
pointless, as there are too many ways we can end-up missing stuff.
Also, there is some system caches out there that simply ignore
set/way operations.

So instead of trying to implement them, let's convert it to VA ops,
and use them as a way to re-enable the trapping of VM ops. That way,
we can detect the point when the MMU/caches are turned off, and do
a full VM flush (which is what the guest was trying to do anyway).

This allows a 32bit zImage to boot on the APM thingy, and will
probably help bootloaders in general.
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      3c1e7165
    • Linus Torvalds's avatar
      Merge tag 'sound-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · a2ae004a
      Linus Torvalds authored 
      Pull sound fixes from Takashi Iwai:
 "This batch ended up being larger than wished, but there is nothing to
  worry too much there.

  Most of commits are for ASoC, a compress NULL dereference fix, a fix
  for probe error handling, and the rest are device-specific fixes.  In
  addition, we have a fix for a long-standing but of seq-dummy driver,
  which just cuts off the buggy part in the end"

* tag 'sound-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq-dummy: remove deadlock-causing events on close
  ASoC: omap-mcbsp: Correct CBM_CFS dai format configuration
  ASoC: soc-compress.c: fix NULL dereference
  ASoC: rt286: set the same format for dac and adc
  ASoC: wm8904: fix runtime warning
  ASoC: simple-card: Fix crash in asoc_simple_card_unref()
  ASoC: fsl: imx-wm8962: Set the card owner field
  ASoC: pcm512x: Fix DSP program selection
  ASoC: rt5677: Modify the behavior that updates the PLL parameter.
  ASoC: fsl_ssi: Fix irq error check
  ASoC: rockchip: i2s: applys rate symmetry for CPU DAI
  ASoC: Intel: Add NULL checks for the stream pointer
  ASoC: wm8960: Fix capture sample rate from 11250 to 11025
  ASoC: adi: Add missing return statement.
  ASoC: Intel: Don't change offset of block allocator during fixed allocate
  ASoC: ts3a227e: Check and report jack status at probe
  ASoC: fsl_esai: Fix incorrect xDC field width of xCCR registers
      a2ae004a
    • Linus Torvalds's avatar
      Merge tag 'pinctrl-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl · 297614f3
      Linus Torvalds authored 
      Pull final pin control fix from Linus Walleij:
 "A late pin control fix for the v3.19 series: The AT91 gpio controller
  would miss wakeup events, this single fix make it work properly"

[ "Final"? Yeah, I'll believe that once I've actually released 3.19 ;)   - Linus ]

* tag 'pinctrl-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: at91: allow to have disabled gpio bank
      297614f3
    • Linus Torvalds's avatar
      vm: make stack guard page errors return VM_FAULT_SIGSEGV rather than SIGBUS · 9c145c56
      Linus Torvalds authored 
      The stack guard page error case has long incorrectly caused a SIGBUS
rather than a SIGSEGV, but nobody actually noticed until commit
fee7e49d ("mm: propagate error from stack expansion even for guard
page") because that error case was never actually triggered in any
normal situations.

Now that we actually report the error, people noticed the wrong signal
that resulted.  So far, only the test suite of libsigsegv seems to have
actually cared, but there are real applications that use libsigsegv, so
let's not wait for any of those to break.
Reported-and-tested-by: default avatarTakashi Iwai <tiwai@suse.de>
Tested-by: default avatarJan Engelhardt <jengelh@inai.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots"
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9c145c56
    • Linus Torvalds's avatar
      vm: add VM_FAULT_SIGSEGV handling support · 33692f27
      Linus Torvalds authored 
      The core VM already knows about VM_FAULT_SIGBUS, but cannot return a
"you should SIGSEGV" error, because the SIGSEGV case was generally
handled by the caller - usually the architecture fault handler.

That results in lots of duplication - all the architecture fault
handlers end up doing very similar "look up vma, check permissions, do
retries etc" - but it generally works.  However, there are cases where
the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV.

In particular, when accessing the stack guard page, libsigsegv expects a
SIGSEGV.  And it usually got one, because the stack growth is handled by
that duplicated architecture fault handler.

However, when the generic VM layer started propagating the error return
from the stack expansion in commit fee7e49d ("mm: propagate error
from stack expansion even for guard page"), that now exposed the
existing VM_FAULT_SIGBUS result to user space.  And user space really
expected SIGSEGV, not SIGBUS.

To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those
duplicate architecture fault handlers about it.  They all already have
the code to handle SIGSEGV, so it's about just tying that new return
value to the existing code, but it's all a bit annoying.

This is the mindless minimal patch to do this.  A more extensive patch
would be to try to gather up the mostly shared fault handling logic into
one generic helper routine, and long-term we really should do that
cleanup.

Just from this patch, you can generally see that most architectures just
copied (directly or indirectly) the old x86 way of doing things, but in
the meantime that original x86 model has been improved to hold the VM
semaphore for shorter times etc and to handle VM_FAULT_RETRY and other
"newer" things, so it would be a good idea to bring all those
improvements to the generic case and teach other architectures about
them too.
Reported-and-tested-by: default avatarTakashi Iwai <tiwai@suse.de>
Tested-by: default avatarJan Engelhardt <jengelh@inai.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots"
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      33692f27
  9. 28 Jan, 2015 12 commits
    • Joe Thornber's avatar
      dm thin: don't allow messages to be sent to a pool target in READ_ONLY or FAIL mode · 2a7eaea0
      Joe Thornber authored 
      You can't modify the metadata in these modes.  It's better to fail these
messages immediately than let the block-manager deny write locks on
metadata blocks.  Otherwise these failed metadata changes will trigger
'needs_check' to get set in the metadata superblock -- requiring repair
using the thin_check utility.
Signed-off-by: default avatarJoe Thornber <ejt@redhat.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
      2a7eaea0
    • Joe Thornber's avatar
      dm cache: fix missing ERR_PTR returns and handling · 766a7888
      Joe Thornber authored 
      Commit 9b1cc9f2 ("dm cache: share cache-metadata object across
inactive and active DM tables") mistakenly ignored the use of ERR_PTR
returns.  Restore missing IS_ERR checks and ERR_PTR returns where
appropriate.
Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarJoe Thornber <ejt@redhat.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
      766a7888
    • Ingo Molnar's avatar
      Merge tag 'perf-urgent-for-mingo' of... · e742f3dc
      Ingo Molnar authored 
      Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

" User visible fixes:

  - Fix probing at function return (Namhyumg Kim)

  Developer visible fixes:

  - Symbol processing changes necessary for fixing support for
    kretprobes in 'perf probe' (Namhyung Kim, Arnaldo Carvalho de Melo)

  - Annotation memory leaks and instruction parsing fixes (Rabin Vincent)

  - Fix perl build on ARM64 (Wang Nam)
"
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      e742f3dc
    • Ilya Dryomov's avatar
      rbd: drop parent_ref in rbd_dev_unprobe() unconditionally · e69b8d41
      Ilya Dryomov authored 
      This effectively reverts the last hunk of 392a9dad ("rbd: detect
when clone image is flattened").

The problem with parent_overlap != 0 condition is that it's possible
and completely valid to have an image with parent_overlap == 0 whose
parent state needs to be cleaned up on unmap.  The next commit, which
drops the "clone image now standalone" logic, opens up another window
of opportunity to hit this, but even without it

    # cat parent-ref.sh
    #!/bin/bash
    rbd create --image-format 2 --size 1 foo
    rbd snap create foo@snap
    rbd snap protect foo@snap
    rbd clone foo@snap bar
    rbd resize --allow-shrink --size 0 bar
    rbd resize --size 1 bar
    DEV=$(rbd map bar)
    rbd unmap $DEV

leaves rbd_device/rbd_spec/etc and rbd_client along with ceph_client
hanging around.

My thinking behind calling rbd_dev_parent_put() unconditionally is that
there shouldn't be any requests in flight at that point in time as we
are deep into unmap sequence.  Hence, even if rbd_dev_unparent() caused
by flatten is delayed by in-flight requests, it will have finished by
the time we reach rbd_dev_unprobe() caused by unmap, thus turning
unconditional rbd_dev_parent_put() into a no-op.

Fixes: http://tracker.ceph.com/issues/10352

Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: default avatarIlya Dryomov <idryomov@redhat.com>
Reviewed-by: default avatarJosh Durgin <jdurgin@redhat.com>
Reviewed-by: default avatarAlex Elder <elder@linaro.org>
      e69b8d41
    • Ilya Dryomov's avatar
      rbd: fix rbd_dev_parent_get() when parent_overlap == 0 · ae43e9d0
      Ilya Dryomov authored 
      The comment for rbd_dev_parent_get() said

    * We must get the reference before checking for the overlap to
    * coordinate properly with zeroing the parent overlap in
    * rbd_dev_v2_parent_info() when an image gets flattened.  We
    * drop it again if there is no overlap.

but the "drop it again if there is no overlap" part was missing from
the implementation.  This lead to absurd parent_ref values for images
with parent_overlap == 0, as parent_ref was incremented for each
img_request and virtually never decremented.

Fix this by leveraging the fact that refresh path calls
rbd_dev_v2_parent_info() under header_rwsem and use it for read in
rbd_dev_parent_get(), instead of messing around with atomics.  Get rid
of barriers in rbd_dev_v2_parent_info() while at it - I don't see what
they'd pair with now and I suspect we are in a pretty miserable
situation as far as proper locking goes regardless.

Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: default avatarIlya Dryomov <idryomov@redhat.com>
Reviewed-by: default avatarJosh Durgin <jdurgin@redhat.com>
Reviewed-by: default avatarAlex Elder <elder@linaro.org>
      ae43e9d0
    • Peter Zijlstra's avatar
      perf: Tighten (and fix) the grouping condition · c3c87e77
      Peter Zijlstra authored 
      The fix from 9fc81d87 ("perf: Fix events installation during
moving group") was incomplete in that it failed to recognise that
creating a group with events for different CPUs is semantically
broken -- they cannot be co-scheduled.

Furthermore, it leads to real breakage where, when we create an event
for CPU Y and then migrate it to form a group on CPU X, the code gets
confused where the counter is programmed -- triggered in practice
as well by me via the perf fuzzer.

Fix this by tightening the rules for creating groups. Only allow
grouping of counters that can be co-scheduled in the same context.
This means for the same task and/or the same cpu.

Fixes: 9fc81d87 ("perf: Fix events installation during moving group")
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150123125834.090683288@infradead.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      c3c87e77
    • Kan Liang's avatar
      perf/x86/intel: Add model number for Airmont · ef454cae
      Kan Liang authored 
      Intel Airmont supports the same architectural and non-architectural
performance monitoring events as Silvermont.
Signed-off-by: default avatarKan Liang <kan.liang@intel.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1421913053-99803-1-git-send-email-kan.liang@intel.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      ef454cae
    • Stephane Eranian's avatar
      perf/rapl: Fix crash in rapl_scale() · 98b008df
      Stephane Eranian authored 
      This patch fixes a systematic crash in rapl_scale()
due to an invalid pointer.

The bug was introduced by commit:

  89cbc767 ("x86: Replace __get_cpu_var uses")

The fix is simple. Just put the parenthesis where it needs
to be, i.e., around rapl_pmu. To my surprise, the compiler
was not complaining about passing an integer instead of a
pointer.
Reported-by: default avatarVince Weaver <vincent.weaver@maine.edu>
Tested-by: default avatarVince Weaver <vincent.weaver@maine.edu>
Fixes: 89cbc767 ("x86: Replace __get_cpu_var uses")
Signed-off-by: default avatarStephane Eranian <eranian@google.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: cl@linux.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150122203834.GA10228@thinkpadSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      98b008df
    • Kan Liang's avatar
      perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization · c05199e5
      Kan Liang authored 
      There were some issues about the uncore driver tried to access
non-existing boxes, which caused boot crashes. These issues have
been all fixed. But we should avoid boot failures if that ever
happens again.

This patch intends to prevent this kind of potential issues.
It moves uncore_box_init out of driver initialization. The box
will be initialized when it's first enabled.
Signed-off-by: default avatarKan Liang <kan.liang@intel.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421729665-5912-1-git-send-email-kan.liang@intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      c05199e5
    • Jan Kara's avatar
      quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space units · 14bf61ff
      Jan Kara authored 
      Currently ->get_dqblk() and ->set_dqblk() use struct fs_disk_quota which
tracks space limits and usage in 512-byte blocks. However VFS quotas
track usage in bytes (as some filesystems require that) and we need to
somehow pass this information. Upto now it wasn't a problem because we
didn't do any unit conversion (thus VFS quota routines happily stuck
number of bytes into d_bcount field of struct fd_disk_quota). Only if
you tried to use Q_XGETQUOTA or Q_XSETQLIM for VFS quotas (or Q_GETQUOTA
/ Q_SETQUOTA for XFS quotas), you got bogus results. Hardly anyone
tried this but reportedly some Samba users hit the problem in practice.
So when we want interfaces compatible we need to fix this.

We bite the bullet and define another quota structure used for passing
information from/to ->get_dqblk()/->set_dqblk. It's somewhat sad we have
to have more conversion routines in fs/quota/quota.c and another copying
of quota structure slows down getting of quota information by about 2%
but it seems cleaner than overloading e.g. units of d_bcount to bytes.

CC: stable@vger.kernel.org
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJan Kara <jack@suse.cz>
      14bf61ff
    • Jan Kara's avatar
      udf: Release preallocation on last writeable close · b07ef352
      Jan Kara authored 
      Commit 6fb1ca92 "udf: Fix race between write(2) and close(2)"
changed the condition when preallocation is released. The idea was that
we don't want to release the preallocation for an inode on close when
there are other writeable file descriptors for the inode. However the
condition was written in the opposite way so we released preallocation
only if there were other writeable file descriptors. Fix the problem by
changing the condition properly.

CC: stable@vger.kernel.org
Fixes: 6fb1ca92Reported-by: default avatarFabian Frederick <fabf@skynet.be>
Signed-off-by: default avatarJan Kara <jack@suse.cz>
      b07ef352
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · c59c961c
      Linus Torvalds authored 
      Pull drm fixes from Dave Airlie:
 "This feels larger than I'd like but its for three reasons.

   a) amdkfd finalising the API more, this is a new feature introduced
      last merge window, and I'd prefer to make the tweaks to the API
      before it first gets into a stable release.

   b) radeon regression required splitting an internal API to fix
      properly, so it just changed a few more lines

   c) vmwgfx fix changes a lock from a mutex->spin lock, this is fallout
      from the new sleep checking.

  Otherwise there is just some tda998x fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: Remove rdev->gart.pages_addr array
  drm/radeon: Restore GART table contents after pinning it in VRAM v3
  drm/radeon: Split off gart_get_page_entry ASIC hook from set_page_entry
  drm/amdkfd: Fix bug in call to init_pipelines()
  drm/amdkfd: Fix bug in pipelines initialization
  drm/radeon: Don't increment pipe_id in kgd_init_pipeline
  drm/i2c: tda998x: set the CEC I2C address based on the slave I2C address
  drm/vmwgfx: Replace the hw mutex with a hw spinlock
  drm/amdkfd: Allow user to limit only queues per device
  drm/amdkfd: PQM handle queue creation fault
  drm: tda998x: Fix EDID read timeout on HDMI connect
  drm: tda998x: Protect the page register
      c59c961c
  11. 27 Jan, 2015 1 commit
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7