- 29 Feb, 2012 3 commits
-
-
Amitkumar Karwar authored
Recent commit "mwifiex: clear previous security setting during association" fixes association failure problems observed in some corner cases by clearing previous security setting before each association. We should reset encryption mode flag as well. This patch takes care of it. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
Nicolas Cavallari discovered that carl9170 has some serious problems delivering data to sleeping stations. It turns out that the driver was not honoring two important flags (IEEE80211_TX_CTL_POLL_RESPONSE and IEEE80211_TX_CTL_CLEAR_PS_FILT) which are set on frames that should be sent although the receiving station is still in powersave mode. Cc: stable <stable@vger.kernel.org> Reported-by:
Nicolas Cavallari <Nicolas.Cavallari@lri.fr> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Nicolas Cavallari authored
On Access Point mode, when transmitting a packet, if the destination station is in powersave mode, we abort transmitting the packet to the device queue, but we do not reclaim the allocated memory. Given enough packets, we can go in a state where there is no packet on the device queue, but we think the device has no memory left, so no packet gets transmitted, connections breaks and the AP stops working. This undo the allocation done in the TX path when the station is in power-save mode. Signed-off-by:
Nicolas Cavallari <cavallar@lri.fr> Acked-by:
-
- 23 Feb, 2012 2 commits
-
-
Arend van Spriel authored
In regular use block-ack timeouts can happen so it does not make sense to fill the log with these messages. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Alwin Beukers <alwin@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The A-MPDU code checked against a retry limit, but it was using the wrong variable to do so. This patch fixes this to assure proper retry mechanism. This problem had a side-effect causing the mac80211 flush callback to remain waiting forever as well. That side effect has been fixed by commit by Stanislaw Gruszka: commit f96b08a7 Date: Tue Jan 17 12:38:50 2012 +0100 brcmsmac: fix tx queue flush infinite loop Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42576 Cc: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by:
-
- 21 Feb, 2012 5 commits
-
-
Mohammed Shafi Shajakhan authored
nothing needs to be done for monitor/AP_VLAN mode on calling ieee80211_bss_info_change_notify -> drv_bss_info_changed with the change flag 'BSS_CHANGED_IDLE'. 'wl1271' seems to use BSS_CHANGED_IDLE only for STA and IBSS mode. further the non-idle state of the monitor mode is taken care by the 'count' variable which counts non-idle interfaces. ieee80211_idle_off(local, "in use") will be called. this fixes the following WARNING when we have initially STA mode (network manager running) and not associated, and change it to monitor mode with network manager disabled and bringing up the monitor mode. this changes the idle state from 'true' (STA unassociated) to 'false' (MONITOR mode) exposed by the commit 405385f8 "mac80211: set bss_conf.idle when vif is connected" WARNING: net/mac80211/main.c:212 ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211]() Hardware name: 64756D6 Pid: 3835, comm: ifconfig Tainted: G O 3.3.0-rc3-wl #9 Call Trace: [<c0133b02>] warn_slowpath_common+0x72/0xa0 [<fc8e8c3f>] ? ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [<fc8e8c3f>] ? ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [<c0133b52>] warn_slowpath_null+0x22/0x30 [<fc8e8c3f>] ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [<fc8f9de3>] __ieee80211_recalc_idle+0x113/0x430 [mac80211] [<fc8fabc6>] ieee80211_do_open+0x156/0x7e0 [mac80211] [<fc8f8a25>] ? ieee80211_check_concurrent_iface+0x25/0x180 [mac80211] [<c015dd9f>] ? raw_notifier_call_chain+0x1f/0x30 [<fc8fb290>] ieee80211_open+0x40/0x80 [mac80211] [<c05894f6>] __dev_open+0x96/0xe0 [<c068fba5>] ? _raw_spin_unlock_bh+0x35/0x40 [<c05881d9>] __dev_change_flags+0x109/0x170 [<c0589423>] dev_change_flags+0x23/0x60 [<c05f3770>] devinet_ioctl+0x6a0/0x770 ieee80211 phy0: device no longer idle - in use Cc: Eliad Peller <eliad@wizery.com> Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
rate control algorithms concludes the rate as invalid with rate[i].idx < -1 , while they do also check for rate[i].count is non-zero. it would be safer to zero initialize the 'count' field. recently we had a ath9k rate control crash where the ath9k rate control in ath_tx_status assumed to check only for rate[i].count being non-zero in one instance and ended up in using invalid rate index for 'connection monitoring NULL func frames' which eventually lead to the crash. thanks to Pavel Roskin for fixing it and finding the root cause. https://bugzilla.redhat.com/show_bug.cgi?id=768639 Cc: stable@vger.kernel.org Cc: Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Johannes Berg authored
When trying to remove a key, we always send key flags just setting the key type, not including the multicast flag and the key ID. As a result, whenever any key was removed, the unicast key 0 would be removed, causing a complete connection loss after the second rekey (the first doesn't cause a key removal). Fix the key removal code to include the key ID and multicast flag, thus removing the correct key. Cc: stable@vger.kernel.org Reported-by:
Alexander Schnaidt <alex.schnaidt@googlemail.com> Tested-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Gabor Juhos authored
The 'rt2x00lib_probe_dev' function tries to allocate the workqueue. If the allocation fails, 'rt2x00_lib_remove_dev' is called on the error path. Because 'rt2x00dev->workqueue' is NULL in this case, the 'destroy_workqueue' call will cause a NULL pointer dereference. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Felix Fietkau authored
Duplicate the data for iniAddac early on, to avoid having to do redundant memcpy calls later. While we're at it, make AR5416 < v2.2 use the same codepath. Fixes a reported crash on x86. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Reported-by:
Magnus Määttä <magnus.maatta@logica.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 15 Feb, 2012 17 commits
-
-
Pavel Roskin authored
Rate control algorithms are supposed to stop processing when they encounter a rate with the index -1. Checking for rate->count not being zero is not enough. Allowing a rate with negative index leads to memory corruption in ath_debug_stat_rc(). One consequence of the bug is discussed at https://bugzilla.redhat.com/show_bug.cgi?id=768639Signed-off-by:
Pavel Roskin <proski@gnu.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Amitkumar Karwar authored
Driver maintains different flags for WEP, WPA, WPA2 security modes. Appropriate flag is set using security information provided in connect request. mwifiex_is_network_compatible() routine uses them to check if driver's setting is compatible with AP. Association is aborted if the routine fails. For some corner cases, it is observed that association is failed even for valid security information based on association history. This patch fixes the problem by clearing previous security setting during each association. We should set WEP key provided in connect request as default tx key. This missing change is also added here. Signed-off-by:
-
Felix Fietkau authored
Most rate control implementations assume .get_rate and .tx_status are only called once the per-station data has been fully initialized. minstrel_ht crashes if this assumption is violated. Signed-off-by:
-
Johannes Berg authored
There are situations where we don't have the necessary rate control information yet for station entries, e.g. when associating. This currently doesn't really happen due to the dummy station handling; explicitly disabling rate control when it's not initialised will allow us to remove dummy stations. Signed-off-by:
-
Ulisses Furquim authored
We need to use the _sync() version for cancelling the info and security timer in the L2CAP connection delete path. Otherwise the delayed work handler might run after the connection object is freed. Signed-off-by:
Ulisses Furquim <ulisses@profusion.mobi> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com>
-
Ulisses Furquim authored
__cancel_delayed_work() is being used in some paths where we cannot sleep waiting for the delayed work to finish. However, that function might return while the timer is running and the work will be queued again. Replace the calls with safer cancel_delayed_work() version which spins until the timer handler finishes on other CPUs and cancels the delayed work. Signed-off-by:
-
Manoj Iyer authored
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f3 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=74DE2B344A7B C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Manoj Iyer <manoj.iyer@canonical.com> Tested-by:
Dennis Chua <dennis.chua@canonical.com> Acked-by:
-
Johan Hedberg authored
We should only perform a reset in hci_dev_do_close if the HCI_QUIRK_NO_RESET flag is set (since in such a case a reset will not be performed when initializing the device). Signed-off-by:
-
Octavian Purdila authored
There is an imbalance in the rfcomm_session_hold / rfcomm_session_put operations which causes the following crash: [ 685.010159] BUG: unable to handle kernel paging request at 6b6b6b6b [ 685.010169] IP: [<c149d76d>] rfcomm_process_dlcs+0x1b/0x15e [ 685.010181] *pdpt = 000000002d665001 *pde = 0000000000000000 [ 685.010191] Oops: 0000 [#1] PREEMPT SMP [ 685.010247] [ 685.010255] Pid: 947, comm: krfcommd Tainted: G C 3.0.16-mid8-dirty #44 [ 685.010266] EIP: 0060:[<c149d76d>] EFLAGS: 00010246 CPU: 1 [ 685.010274] EIP is at rfcomm_process_dlcs+0x1b/0x15e [ 685.010281] EAX: e79f551c EBX: 6b6b6b6b ECX: 00000007 EDX: e79f40b4 [ 685.010288] ESI: e79f4060 EDI: ed4e1f70 EBP: ed4e1f68 ESP: ed4e1f50 [ 685.010295] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 685.010303] Process krfcommd (pid: 947, ti=ed4e0000 task=ed43e5e0 task.ti=ed4e0000) [ 685.010308] Stack: [ 685.010312] ed4e1f68 c149eb53 e5925150 e79f4060 ed500000 ed4e1f70 ed4e1f80 c149ec10 [ 685.010331] 00000000 ed43e5e0 00000000 ed4e1f90 ed4e1f9c c149ec87 0000bf54 00000000 [ 685.010348] 00000000 ee03bf54 c149ec37 ed4e1fe4 c104fe01 00000000 00000000 00000000 [ 685.010367] Call Trace: [ 685.010376] [<c149eb53>] ? rfcomm_process_rx+0x6e/0x74 [ 685.010387] [<c149ec10>] rfcomm_process_sessions+0xb7/0xde [ 685.010398] [<c149ec87>] rfcomm_run+0x50/0x6d [ 685.010409] [<c149ec37>] ? rfcomm_process_sessions+0xde/0xde [ 685.010419] [<c104fe01>] kthread+0x63/0x68 [ 685.010431] [<c104fd9e>] ? __init_kthread_worker+0x42/0x42 [ 685.010442] [<c14dae82>] kernel_thread_helper+0x6/0xd This issue has been brought up earlier here: https://lkml.org/lkml/2011/5/21/127 The issue appears to be the rfcomm_session_put in rfcomm_recv_ua. This operation doesn't seem be to required as for the non-initiator case we have the rfcomm_process_rx doing an explicit put and in the initiator case the last dlc_unlink will drive the reference counter to 0. There have been several attempts to fix these issue: 6c2718da Bluetooth: Do not call rfcomm_session_put() for RFCOMM UA on closed socket 683d949a Bluetooth: Never deallocate a session when some DLC points to it but AFAICS they do not fix the issue just make it harder to reproduce. Signed-off-by:
Octavian Purdila <octavian.purdila@intel.com> Signed-off-by:
Gopala Krishna Murala <gopala.krishna.murala@intel.com> Acked-by:
-
Andre Guedes authored
We don't need to use the _sync variant in hci_conn_hold and hci_conn_put to cancel conn->disc_work delayed work. This way we avoid potential deadlocks like this one reported by lockdep. ====================================================== [ INFO: possible circular locking dependency detected ] 3.2.0+ #1 Not tainted ------------------------------------------------------- kworker/u:1/17 is trying to acquire lock: (&hdev->lock){+.+.+.}, at: [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] but task is already holding lock: ((&(&conn->disc_work)->work)){+.+...}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((&(&conn->disc_work)->work)){+.+...}: [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff81034ed1>] wait_on_work+0x3d/0xaa [<ffffffff81035b54>] __cancel_work_timer+0xac/0xef [<ffffffff81035ba4>] cancel_delayed_work_sync+0xd/0xf [<ffffffffa00554b0>] smp_chan_create+0xde/0xe6 [bluetooth] [<ffffffffa0056160>] smp_conn_security+0xa3/0x12d [bluetooth] [<ffffffffa0053640>] l2cap_connect_cfm+0x237/0x2e8 [bluetooth] [<ffffffffa004239c>] hci_proto_connect_cfm+0x2d/0x6f [bluetooth] [<ffffffffa0046ea5>] hci_event_packet+0x29d1/0x2d60 [bluetooth] [<ffffffffa003dde3>] hci_rx_work+0xd0/0x2e1 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 -> #1 (slock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff812e553a>] _raw_spin_lock_bh+0x36/0x6a [<ffffffff81244d56>] lock_sock_nested+0x24/0x7f [<ffffffffa004d96f>] lock_sock+0xb/0xd [bluetooth] [<ffffffffa0052906>] l2cap_chan_connect+0xa9/0x26f [bluetooth] [<ffffffffa00545f8>] l2cap_sock_connect+0xb3/0xff [bluetooth] [<ffffffff81243b48>] sys_connect+0x69/0x8a [<ffffffff812e6579>] system_call_fastpath+0x16/0x1b -> #0 (&hdev->lock){+.+.+.}: [<ffffffff81056d06>] __lock_acquire+0xa80/0xd74 [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff812e3870>] __mutex_lock_common+0x48/0x38e [<ffffffff812e3c75>] mutex_lock_nested+0x2a/0x31 [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Chain exists of: &hdev->lock --> slock-AF_BLUETOOTH-BTPROTO_L2CAP --> (&(&conn->disc_work)->work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&conn->disc_work)->work)); lock(slock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&conn->disc_work)->work)); lock(&hdev->lock); *** DEADLOCK *** 2 locks held by kworker/u:1/17: #0: (hdev->name){.+.+.+}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf #1: ((&(&conn->disc_work)->work)){+.+...}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf stack backtrace: Pid: 17, comm: kworker/u:1 Not tainted 3.2.0+ #1 Call Trace: [<ffffffff812e06c6>] print_circular_bug+0x1f8/0x209 [<ffffffff81056d06>] __lock_acquire+0xa80/0xd74 [<ffffffff81021ef2>] ? arch_local_irq_restore+0x6/0xd [<ffffffff81022bc7>] ? vprintk+0x3f9/0x41e [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff812e3870>] __mutex_lock_common+0x48/0x38e [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff81190fd6>] ? __dynamic_pr_debug+0x6d/0x6f [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff8105320f>] ? trace_hardirqs_off+0xd/0xf [<ffffffff812e3c75>] mutex_lock_nested+0x2a/0x31 [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81035751>] ? process_one_work+0x11a/0x2bf [<ffffffff81055af3>] ? lock_acquired+0x1d0/0x1df [<ffffffffa00410f3>] ? hci_acl_disconn+0x65/0x65 [bluetooth] [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff810407ed>] ? finish_task_switch+0x45/0xc5 [<ffffffff810360aa>] ? manage_workers.isra.25+0x16a/0x16a [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 [<ffffffff812e5db4>] ? retint_restore_args+0x13/0x13 [<ffffffff8103996e>] ? __init_kthread_worker+0x55/0x55 [<ffffffff812e7750>] ? gs_change+0x13/0x13 Signed-off-by:Andre Guedes <andre.guedes@openbossa.org> Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Reviewed-by:
-
Octavian Purdila authored
Since bluetooth uses multiple protocols types, to avoid lockdep warnings, we need to use different lockdep classes (one for each protocol type). This is already done in bt_sock_create but it misses a couple of cases when new connections are created. This patch corrects that to fix the following warning: <4>[ 1864.732366] ======================================================= <4>[ 1864.733030] [ INFO: possible circular locking dependency detected ] <4>[ 1864.733544] 3.0.16-mid3-00007-gc9a0f62 #3 <4>[ 1864.733883] ------------------------------------------------------- <4>[ 1864.734408] t.android.btclc/4204 is trying to acquire lock: <4>[ 1864.734869] (rfcomm_mutex){+.+.+.}, at: [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.735541] <4>[ 1864.735549] but task is already holding lock: <4>[ 1864.736045] (sk_lock-AF_BLUETOOTH){+.+.+.}, at: [<c1498bf7>] lock_sock+0xa/0xc <4>[ 1864.736732] <4>[ 1864.736740] which lock already depends on the new lock. <4>[ 1864.736750] <4>[ 1864.737428] <4>[ 1864.737437] the existing dependency chain (in reverse order) is: <4>[ 1864.738016] <4>[ 1864.738023] -> #1 (sk_lock-AF_BLUETOOTH){+.+.+.}: <4>[ 1864.738549] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.738977] [<c13d35c1>] lock_sock_nested+0x58/0x68 <4>[ 1864.739411] [<c1493c33>] l2cap_sock_sendmsg+0x3e/0x76 <4>[ 1864.739858] [<c13d06c3>] __sock_sendmsg+0x50/0x59 <4>[ 1864.740279] [<c13d0ea2>] sock_sendmsg+0x94/0xa8 <4>[ 1864.740687] [<c13d0ede>] kernel_sendmsg+0x28/0x37 <4>[ 1864.741106] [<c14969ca>] rfcomm_send_frame+0x30/0x38 <4>[ 1864.741542] [<c1496a2a>] rfcomm_send_ua+0x58/0x5a <4>[ 1864.741959] [<c1498447>] rfcomm_run+0x441/0xb52 <4>[ 1864.742365] [<c104f095>] kthread+0x63/0x68 <4>[ 1864.742742] [<c14d5182>] kernel_thread_helper+0x6/0xd <4>[ 1864.743187] <4>[ 1864.743193] -> #0 (rfcomm_mutex){+.+.+.}: <4>[ 1864.743667] [<c1061ada>] __lock_acquire+0x988/0xc00 <4>[ 1864.744100] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.744519] [<c14d2c70>] __mutex_lock_common+0x3b/0x33f <4>[ 1864.744975] [<c14d303e>] mutex_lock_nested+0x2d/0x36 <4>[ 1864.745412] [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.745842] [<c14990d9>] __rfcomm_sock_close+0x5f/0x6b <4>[ 1864.746288] [<c1499114>] rfcomm_sock_shutdown+0x2f/0x62 <4>[ 1864.746737] [<c13d275d>] sys_socketcall+0x1db/0x422 <4>[ 1864.747165] [<c14d42f0>] syscall_call+0x7/0xb Signed-off-by: -
Vinicius Costa Gomes authored
queue_delayed_work() expects a relative time for when that work should be scheduled. Signed-off-by:
-
Andrzej Kaczmarek authored
After moving L2CAP timers to workqueues l2cap_set_timer expects timeout value to be specified in jiffies but constants defined in miliseconds are used. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. __set_chan_timer macro still uses jiffies as input to avoid multiple conversions from/to jiffies for sk_sndtimeo value which is already specified in jiffies. Signed-off-by:
Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Ackec-by:
-
Andrzej Kaczmarek authored
sk_sndtime value should be specified in jiffies thus initial value needs to be converted from miliseconds. Otherwise this timeout is unreliable when CONFIG_HZ is not set to 1000. Signed-off-by:
-
Johan Hedberg authored
As reported by Dan Carpenter this function causes a Sparse warning and shouldn't be declared inline: include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a definition" Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Daniel Wagner authored
[ 2096.384084] btusb_send_frame:684: hci0 [ 2096.384087] usb 3-1: BOGUS urb flags, 2 --> 0 [ 2096.384091] Bluetooth: hci0 urb ffff8801b61d3a80 submission failed (22) According the documentation in usb_submit_urb() URB_ISO_ASAP flag is only allowed for endpoints of type USB_ENDPOINT_XFER_ISOC. This reverts commit b8aabfc9. Signed-off-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by:
-
Peter Hurley authored
Commit 33060542 fixed l2cap conn establishment for non-ssp remote devices by not setting HCI_CONN_ENCRYPT_PEND every time conn security is tested (which was always returning failure on any subsequent security checks). However, this broke l2cap conn establishment for ssp remote devices when an ACL link was already established at SDP-level security. This fix ensures that encryption must be pending whenever authentication is also pending. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Tested-by:
-
- 09 Feb, 2012 2 commits
-
-
Simon Graham authored
Fixes problem where caller would think routine succeeded when it failed leading to divide by zero panic. Signed-off-by:
Simon Graham <simon.graham@virtualcomputer.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
read_lock(&tpt_trig->trig.leddev_list_lock) is accessed via the path ieee80211_open (->) ieee80211_do_open (->) ieee80211_mod_tpt_led_trig (->) ieee80211_start_tpt_led_trig (->) tpt_trig_timer before initializing it. the intilization of this read/write lock happens via the path ieee80211_led_init (->) led_trigger_register, but we are doing 'ieee80211_led_init' after 'ieeee80211_if_add' where we register netdev_ops. so we access leddev_list_lock before initializing it and causes the following bug in chrome laptops with AR928X cards with the following script while true do sudo modprobe -v ath9k sleep 3 sudo modprobe -r ath9k sleep 3 done BUG: rwlock bad magic on CPU#1, wpa_supplicant/358, f5b9eccc Pid: 358, comm: wpa_supplicant Not tainted 3.0.13 #1 Call Trace: [<8137b9df>] rwlock_bug+0x3d/0x47 [<81179830>] do_raw_read_lock+0x19/0x29 [<8137f063>] _raw_read_lock+0xd/0xf [<f9081957>] tpt_trig_timer+0xc3/0x145 [mac80211] [<f9081f3a>] ieee80211_mod_tpt_led_trig+0x152/0x174 [mac80211] [<f9076a3f>] ieee80211_do_open+0x11e/0x42e [mac80211] [<f9075390>] ? ieee80211_check_concurrent_iface+0x26/0x13c [mac80211] [<f9076d97>] ieee80211_open+0x48/0x4c [mac80211] [<812dbed8>] __dev_open+0x82/0xab [<812dc0c9>] __dev_change_flags+0x9c/0x113 [<812dc1ae>] dev_change_flags+0x18/0x44 [<8132144f>] devinet_ioctl+0x243/0x51a [<81321ba9>] inet_ioctl+0x93/0xac [<812cc951>] sock_ioctl+0x1c6/0x1ea [<812cc78b>] ? might_fault+0x20/0x20 [<810b1ebb>] do_vfs_ioctl+0x46e/0x4a2 [<810a6ebb>] ? fget_light+0x2f/0x70 [<812ce549>] ? sys_recvmsg+0x3e/0x48 [<810b1f35>] sys_ioctl+0x46/0x69 [<8137fa77>] sysenter_do_call+0x12/0x2 Cc: <stable@vger.kernel.org> Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Cc: Abhijit Pradhan <abhijit@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by:
-
- 07 Feb, 2012 1 commit
-
-
Tomas Vanek authored
Some devices (iwl5100) cannot connect to zd1211rw based AP. It appears that zd1211 firmware messes up duration_id field if it is not set to zero by driver. Sniffing traffic shows that zd1211 is transmitting frames with duration_id bits 14 and 15 set and other bits appearing random. Setting duration_id at driver to zero results zd1211 outputting sane duration_id. This means that firmware is setting correct values itself and expects duration_id to be zero in first place. Looking at vendor driver shows that only PSPoll frames have duration_id set by driver, for other frames duration_id left zero. Original bug-report and attached patch at: http://sourceforge.net/mailarchive/message.php?msg_id=28759111Reported-by:
Tomas Vanek <Tomas.Vanek@fbl.cz> [modified original patch from bug-report, added check for pspoll frame] Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
-
- 06 Feb, 2012 4 commits
-
-
Henrik Rydberg authored
The brcmsmac driver is now using the bcma SPROM CRC check, which does not recognize all chipsets that were functional prior to the switch. In particular, the current code bails out on odd CRC errors in recent Macbooks. This patch ignores those errors, with the argument that an unrecognized SPROM should be treated similarly to a non-existing one. Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
-
Felix Fietkau authored
commit adb5066a "ath9k_hw: do not apply the 2.4 ghz ack timeout workaround to cts" reduced the hardware CTS timeout to the normal values specified by the standard, but it turns out while it doesn't need the same extra time that it needs for the ACK timeout, it does need more than the value specified in the standard, but only for 2.4 GHz. This patch brings the CTS timeout value in sync with the initialization values, while still allowing adjustment for bigger distances. Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Reported-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Felix Fietkau authored
commit b4a82a0a "ath9k_hw: fix interpretation of the rx KeyMiss flag" fixed the interpretation of the KeyMiss flag for keycache based lookups, however WEP encryption uses a static index, so KeyMiss is always asserted for it, even though frames are decrypted properly. Fix this by clearing the ATH9K_RXERR_KEYMISS flag if no keycache based lookup was performed. Signed-off-by:
Laurent Bonnans <bonnans.l@gmail.com> Reported-by:
Jurica Vukadin <u.ra604@googlemail.com> Signed-off-by:
-
Amitkumar Karwar authored
If driver load is failed, sometimes few pointers may remain uninitialized ex. priv->wdev, priv->netdev, adapter->sleep_cfm This will cause NULL pointer dereferance while unloading the driver. Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
-
- 03 Feb, 2012 3 commits
-
-
Mohammed Shafi Shajakhan authored
all works need to be initialized before ieee80211_register_hw to prevent mac80211 call backs such as drv_start, drv_config getting started. otherwise we would queue/cancel works before initializing them and it leads to kernel panic. this issue can be recreated with the following script in Chrome laptops with AR928X cards, with background scan running (or) Network manager is running while true do sudo modprobe -v ath9k sleep 3 sudo modprobe -r ath9k sleep 3 done EIP: [<81040a47>] __cancel_work_timer+0xb8/0xe1 SS:ESP 0068:f6be9d70 ---[ end trace 4f86d6139a9900ef ]--- Registered led device: ath9k-phy0 ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf88a0000, irq=16 Kernel panic - not syncing: Fatal exception Pid: 456, comm: wpa_supplicant Tainted: G D 3.0.13 #1 Call Trace: [<81379e21>] panic+0x53/0x14a [<81004a30>] oops_end+0x73/0x81 [<81004b53>] die+0x4c/0x55 [<81002710>] do_trap+0x7c/0x83 [<81002855>] ? do_bounds+0x58/0x58 [<810028cc>] do_invalid_op+0x77/0x81 [<81040a47>] ? __cancel_work_timer+0xb8/0xe1 [<810489ec>] ? sched_clock_cpu+0x81/0x11f [<8103f809>] ? wait_on_work+0xe2/0xf7 [<8137f807>] error_code+0x67/0x6c [<810300d8>] ? wait_consider_task+0x4ba/0x84c [<81040a47>] ? __cancel_work_timer+0xb8/0xe1 [<810380c9>] ? try_to_del_timer_sync+0x5f/0x67 [<81040a91>] cancel_work_sync+0xf/0x11 [<f88d7b7c>] ath_set_channel+0x62/0x25c [ath9k] [<f88d67d1>] ? ath9k_tx_last_beacon+0x26a/0x85c [ath9k] [<f88d8899>] ath_radio_disable+0x3f1/0x68e [ath9k] [<f90d0edb>] ieee80211_hw_config+0x111/0x116 [mac80211] [<f90dd95c>] __ieee80211_recalc_idle+0x919/0xa37 [mac80211] [<f90dda76>] __ieee80211_recalc_idle+0xa33/0xa37 [mac80211] [<812dbed8>] __dev_open+0x82/0xab Cc: <stable@vger.kernel.org> Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Tested-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Amitkumar Karwar authored
Currently even if association is failed "iw link" shows some information about connected BSS and "Tx timeout" error is seen in dmesg log. This patch fixes below issues in the code to handle assoc failure case correctly. 1) "status" variable in mwifiex_wait_queue_complete() is not correctly updated. Hence driver doesn't inform cfg80211 stack about association failure. 2) During association network queues are stopped but carrier is not cleared, which gives Tx timeout error in failure case Signed-off-by:
-
John W. Linville authored
The device seems to survive the issue, so no need to flood the logs about it... Signed-off-by:
-
- 01 Feb, 2012 3 commits
-
-
Eliad Peller authored
The current code checks for stored_mpdu_num > 1, causing the reorder_timer to be triggered indefinitely, but the frame is never timed-out (until the next packet is received) Signed-off-by:
Eliad Peller <eliad@wizery.com> Cc: <stable@vger.kernel.org> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Emmanuel Grumbach authored
In my AMPDU rework, I rely on the sequence numbers of frames. But I didn't check that the frame has a valid tid before updating the tracking counters. As a result, the Tx queues were stalled. People who hit this bug saw that we simply didn't let any data out. This bug was introduced in 3.3. This patch fixes that and checks that the frame is a QoS frame before looking at its tid and changing the counters. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Hauke Mehrtens authored
ssb supports one extra device on the cardbus. This results in two devices in total, one beeing the host controller itself and the other the external device connected to the hostcontroller over cardbus. This makes the cardbus slot work on the Linksys WRT150N. Reported-by:
Aaron Z <aaronz@pls-net.org> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
