- 03 Nov, 2017 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "One minor fix in the error leg of the qla2xxx driver (it oopses the system if we get an error trying to start the internal kernel thread). The fix is minor because the problem isn't often encountered in the field (although it can be induced by inserting the module in a low memory environment)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix oops in qla2x00_probe_one error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 4.14. This is bigger than I like to send at rc7, but that's at least partly because I didn't send any fixes last week. If it wasn't for the IMC driver, which is new and getting heavy testing, the diffstat would look a bit better. I've also added ftrace on big endian to my test suite, so we shouldn't break that again in future. - A fix to the handling of misaligned paste instructions (P9 only), where a change to a #define has caused the check for the instruction to always fail. - The preempt handling was unbalanced in the radix THP flush (P9 only). Though we don't generally use preempt we want to keep it working as much as possible. - Two fixes for IMC (P9 only), one when booting with restricted number of CPUs and one in the error handling when initialisation fails due to firmware etc. - A revert to fix function_graph on big endian machines, and then a rework of the reverted patch to fix kprobes blacklist handling on big endian machines. Thanks to: Anju T Sudhakar, Guilherme G. Piccoli, Madhavan Srinivasan, Naveen N. Rao, Nicholas Piggin, Paul Mackerras" * tag 'powerpc-4.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf: Fix core-imc hotplug callback failure during imc initialization powerpc/kprobes: Dereference function pointers only if the address does not belong to kernel text Revert "powerpc64/elfv1: Only dereference function descriptor for non-text symbols" powerpc/64s/radix: Fix preempt imbalance in TLB flush powerpc: Fix check for copy/paste instructions in alignment handler powerpc/perf: Fix IMC allocation routine
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "Fix dw_mmc request timeout issues" * tag 'mmc-v4.14-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: dw_mmc: Fix the DTO timeout calculation mmc: dw_mmc: Add locking to the CTO timer mmc: dw_mmc: Fix the CTO timeout calculation mmc: dw_mmc: cancel the CTO timer after a voltage switch
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: - one nouveau regression fix - some amdgpu fixes for stable to fix hangs on some harvested Polaris GPUs - a set of KASAN and regression fixes for i915, their CI system seems to be working pretty well now. * tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: allow harvesting check for Polaris VCE drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting drm/i915: Check incoming alignment for unfenced buffers (on i915gm) drm/nouveau/kms/nv50: use the correct state for base channel notifier setup drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr) drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects) drm/i915/edp: read edp display control registers unconditionally drm/i915: Do not rely on wm preservation for ILK watermarks drm/i915: Cancel the modeset retry work during modeset cleanup
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Hopefully this is the last batch of networking fixes for 4.14 Fingers crossed... 1) Fix stmmac to use the proper sized OF property read, from Bhadram Varka. 2) Fix use after free in net scheduler tc action code, from Cong Wang. 3) Fix SKB control block mangling in tcp_make_synack(). 4) Use proper locking in fib_dump_info(), from Florian Westphal. 5) Fix IPG encodings in systemport driver, from Florian Fainelli. 6) Fix division by zero in NV TCP congestion control module, from Konstantin Khlebnikov. 7) Fix use after free in nf_reject_ipv4, from Tejaswi Tanikella" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: systemport: Correct IPG length settings tcp: do not mangle skb->cb[] in tcp_make_synack() fib: fib_dump_info can no longer use __in_dev_get_rtnl stmmac: use of_property_read_u32 instead of read_u8 net_sched: hold netns refcnt for each action net_sched: acquire RTNL in tc_action_net_exit() net: vrf: correct FRA_L3MDEV encode type tcp_nv: fix division by zero in tcpnv_acked() netfilter: nf_reject_ipv4: Fix use-after-free in send_reset netfilter: nft_set_hash: disable fast_ops for 2-len keys
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, swap: fix race between swap count continuation operations mm/huge_memory.c: deposit page table when copying a PMD migration entry initramfs: fix initramfs rebuilds w/ compression after disabling fs/hugetlbfs/inode.c: fix hwpoison reserve accounting ocfs2: fstrim: Fix start offset of first cluster group during fstrim mm, /proc/pid/pagemap: fix soft dirty marking for PMD migration entry userfaultfd: hugetlbfs: prevent UFFDIO_COPY to fill beyond the end of i_size
-
Paul Burton authored
MIPS will soon not be a part of Imagination Technologies, and as such many @imgtec.com email addresses will no longer be valid. This patch updates the addresses for those who: - Have 10 or more patches in mainline authored using an @imgtec.com email address, or any patches dated within the past year. - Are still with Imagination but leaving as part of the MIPS business unit, as determined from an internal email address list. - Haven't already updated their email address (ie. JamesH) or expressed a desire to be excluded (ie. Maciej). - Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt & myself. New addresses are of the form firstname.lastname@mips.com, and all verified against an internal email address list. An entry is added to .mailmap for each person such that get_maintainer.pl will report the new addresses rather than @imgtec.com addresses which will soon be dead. Instances of the affected addresses throughout the tree are then mechanically replaced with the new @mips.com address. Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com> Acked-by:
Dengcheng Zhu <dengcheng.zhu@mips.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Acked-by:
Matt Redfearn <matt.redfearn@mips.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael J. Wysocki authored
Commit 890da9cf (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") is not sufficient to restore the previous behavior of "cpu MHz" in /proc/cpuinfo on x86 due to some changes made after the commit it has reverted. To address this, make the code in question use arch_freq_get_on_cpu() which also is used by cpufreq for reporting the current frequency of CPUs and since that function doesn't really depend on cpufreq in any way, drop the CONFIG_CPU_FREQ dependency for the object file containing it. Also refactor arch_freq_get_on_cpu() somewhat to avoid IPIs and return cached values right away if it is called very often over a short time (to prevent user space from triggering IPI storms through it). Fixes: 890da9cf (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Cc: stable@kernel.org # 4.13 - together with 890da9cfSigned-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Huang Ying authored
One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b6217 ("mm/swap: add cluster lock") Signed-off-by:
"Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Zi Yan authored
We need to deposit pre-allocated PTE page table when a PMD migration entry is copied in copy_huge_pmd(). Otherwise, we will leak the pre-allocated page and cause a NULL pointer dereference later in zap_huge_pmd(). The missing counters during PMD migration entry copy process are added as well. The bug report is here: https://lkml.org/lkml/2017/10/29/214 Link: http://lkml.kernel.org/r/20171030144636.4836-1-zi.yan@sent.com Fixes: 84c3fc4e ("mm: thp: check pmd migration entry in common path") Signed-off-by:
Zi Yan <zi.yan@cs.rutgers.edu> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Florian Fainelli authored
This is a follow-up to commit 57ddfdaa ("initramfs: fix disabling of initramfs (and its compression)"). This particular commit fixed the use case where we build the kernel with an initramfs with no compression, and then we build the kernel with no initramfs. Now this still left us with the same case as described here: http://lkml.kernel.org/r/20170521033337.6197-1-f.fainelli@gmail.com not working with initramfs compression. This can be seen by the following steps/timestamps: https://www.spinics.net/lists/kernel/msg2598153.html .initramfs_data.cpio.gz.cmd is correct: cmd_usr/initramfs_data.cpio.gz := /bin/bash ./scripts/gen_initramfs_list.sh -o usr/initramfs_data.cpio.gz -u 1000 -g 1000 /home/fainelli/work/uclinux-rootfs/romfs /home/fainelli/work/uclinux-rootfs/misc/initramfs.dev and was generated the first time we did generate the gzip initramfs, so the command has not changed, nor its arguments, so we just don't call it, no initramfs cpio is re-generated as a consequence. The fix for this problem is just to properly keep track of the .initramfs_cpio_data.d file by suffixing it with the compression extension. This takes care of properly tracking dependencies such that the initramfs get (re)generated any time files are added/deleted etc. Link: http://lkml.kernel.org/r/20170930033936.6722-1-f.fainelli@gmail.com Fixes: db2aa7fd ("initramfs: allow again choice of the embedded initramfs compression algorithm") Fixes: 9e3596b0 ("kbuild: initramfs cleanup, set target from Kconfig") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: "Francisco Blas Izquierdo Riera (klondike)" <klondike@xiscosoft.net> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Kravetz authored
Calling madvise(MADV_HWPOISON) on a hugetlbfs page will result in bad (negative) reserved huge page counts. This may not happen immediately, but may happen later when the underlying file is removed or filesystem unmounted. For example: AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 1 HugePages_Free: 0 HugePages_Rsvd: 18446744073709551615 HugePages_Surp: 0 Hugepagesize: 2048 kB In routine hugetlbfs_error_remove_page(), hugetlb_fix_reserve_counts is called after remove_huge_page. hugetlb_fix_reserve_counts is designed to only be called/used only if a failure is returned from hugetlb_unreserve_pages. Therefore, call hugetlb_unreserve_pages as required and only call hugetlb_fix_reserve_counts in the unlikely event that hugetlb_unreserve_pages returns an error. Link: http://lkml.kernel.org/r/20171019230007.17043-2-mike.kravetz@oracle.com Fixes: 78bb9203 ("mm: hwpoison: dissolve in-use hugepage in unrecoverable memory error") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ashish Samant authored
The first cluster group descriptor is not stored at the start of the group but at an offset from the start. We need to take this into account while doing fstrim on the first cluster group. Otherwise we will wrongly start fstrim a few blocks after the desired start block and the range can cross over into the next cluster group and zero out the group descriptor there. This can cause filesytem corruption that cannot be fixed by fsck. Link: http://lkml.kernel.org/r/1507835579-7308-1-git-send-email-ashish.samant@oracle.comSigned-off-by:
Ashish Samant <ashish.samant@oracle.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Huang Ying authored
When the pagetable is walked in the implementation of /proc/<pid>/pagemap, pmd_soft_dirty() is used for both the PMD huge page map and the PMD migration entries. That is wrong, pmd_swp_soft_dirty() should be used for the PMD migration entries instead because the different page table entry flag is used. As a result, /proc/pid/pagemap may report incorrect soft dirty information for PMD migration entries. Link: http://lkml.kernel.org/r/20171017081818.31795-1-ying.huang@intel.com Fixes: 84c3fc4e ("mm: thp: check pmd migration entry in common path") Signed-off-by:
"Huang, Ying" <ying.huang@intel.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Hugh Dickins <hughd@google.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Daniel Colascione <dancol@google.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrea Arcangeli authored
This oops: kernel BUG at fs/hugetlbfs/inode.c:484! RIP: remove_inode_hugepages+0x3d0/0x410 Call Trace: hugetlbfs_setattr+0xd9/0x130 notify_change+0x292/0x410 do_truncate+0x65/0xa0 do_sys_ftruncate.constprop.3+0x11a/0x180 SyS_ftruncate+0xe/0x10 tracesys+0xd9/0xde was caused by the lack of i_size check in hugetlb_mcopy_atomic_pte. mmap() can still succeed beyond the end of the i_size after vmtruncate zapped vmas in those ranges, but the faults must not succeed, and that includes UFFDIO_COPY. We could differentiate the retval to userland to represent a SIGBUS like a page fault would do (vs SIGSEGV), but it doesn't seem very useful and we'd need to pick a random retval as there's no meaningful syscall retval that would differentiate from SIGSEGV and SIGBUS, there's just -EFAULT. Link: http://lkml.kernel.org/r/20171016223914.2421-2-aarcange@redhat.comSigned-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Florian Fainelli authored
Due to a documentation mistake, the IPG length was set to 0x12 while it should have been 12 (decimal). This would affect short packet (64B typically) performance since the IPG was bigger than necessary. Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Christoph Paasch sent a patch to address the following issue : tcp_make_synack() is leaving some TCP private info in skb->cb[], then send the packet by other means than tcp_transmit_skb() tcp_transmit_skb() makes sure to clear skb->cb[] to not confuse IPv4/IPV6 stacks, but we have no such cleanup for SYNACK. tcp_make_synack() should not use tcp_init_nondata_skb() : tcp_init_nondata_skb() really should be limited to skbs put in write/rtx queues (the ones that are only sent via tcp_transmit_skb()) This patch fixes the issue and should even save few cpu cycles ;) Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Christoph Paasch <cpaasch@apple.com> Reviewed-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
syzbot reported yet another regression added with DOIT_UNLOCKED. When nexthop is marked as dead, fib_dump_info uses __in_dev_get_rtnl(): ./include/linux/inetdevice.h:230 suspicious rcu_dereference_protected() usage! rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor2/23859: #0: (rcu_read_lock){....}, at: [<ffffffff840283f0>] inet_rtm_getroute+0xaa0/0x2d70 net/ipv4/route.c:2738 [..] lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4665 __in_dev_get_rtnl include/linux/inetdevice.h:230 [inline] fib_dump_info+0x1136/0x13d0 net/ipv4/fib_semantics.c:1377 inet_rtm_getroute+0xf97/0x2d70 net/ipv4/route.c:2785 .. This isn't safe anymore, callers either hold RTNL mutex or rcu read lock, so these spots must use rcu_dereference_rtnl() or plain rcu_derefence() (plus unconditional rcu read lock). This does the latter. Fixes: 394f51ab ("ipv4: route: set ipv4 RTM_GETROUTE to not use rtnl") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bhadram Varka authored
Numbers in DT are stored in “cells” which are 32-bits in size. of_property_read_u8 does not work properly because of endianness problem. This causes it to always return 0 with little-endian architectures. Fix it by using of_property_read_u32() OF API. Signed-off-by:
Bhadram Varka <vbhadram@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Cong Wang says: ==================== net_sched: fix a use-after-free for tc actions This patchset fixes a use-after-free reported by Lucas and closes potential races too. Please see each patch for details. ==================== Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cong Wang authored
TC actions have been destroyed asynchronously for a long time, previously in a RCU callback and now in a workqueue. If we don't hold a refcnt for its netns, we could use the per netns data structure, struct tcf_idrinfo, after it has been freed by netns workqueue. Hold refcnt to ensure netns destroy happens after all actions are gone. Fixes: ddf97ccd ("net_sched: add network namespace support for tc actions") Reported-by:
Lucas Bates <lucasb@mojatatu.com> Tested-by:
Lucas Bates <lucasb@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cong Wang authored
I forgot to acquire RTNL in tc_action_net_exit() which leads that action ops->cleanup() is not always called with RTNL. This usually is not a big deal because this function is called after all netns refcnt are gone, but given RTNL protects more than just actions, add it for safety and consistency. Also add an assertion to catch other potential bugs. Fixes: ddf97ccd ("net_sched: add network namespace support for tc actions") Reported-by:
Lucas Bates <lucasb@mojatatu.com> Tested-by:
Lucas Bates <lucasb@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 02 Nov, 2017 18 commits
-
-
Madhavan Srinivasan authored
Call trace observed during boot: nest_capp0_imc performance monitor hardware support registered nest_capp1_imc performance monitor hardware support registered core_imc memory allocation for cpu 56 failed Unable to handle kernel paging request for data at address 0xffa400010 Faulting instruction address: 0xc000000000bf3294 0:mon> e cpu 0x0: Vector: 300 (Data Access) at [c000000ff38ff8d0] pc: c000000000bf3294: mutex_lock+0x34/0x90 lr: c000000000bf3288: mutex_lock+0x28/0x90 sp: c000000ff38ffb50 msr: 9000000002009033 dar: ffa400010 dsisr: 80000 current = 0xc000000ff383de00 paca = 0xc000000007ae0000 softe: 0 irq_happened: 0x01 pid = 13, comm = cpuhp/0 Linux version 4.11.0-39.el7a.ppc64le (mockbuild@ppc-058.build.eng.bos.redhat.com) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Tue Oct 3 07:42:44 EDT 2017 0:mon> t [c000000ff38ffb80] c0000000002ddfac perf_pmu_migrate_context+0xac/0x470 [c000000ff38ffc40] c00000000011385c ppc_core_imc_cpu_offline+0x1ac/0x1e0 [c000000ff38ffc90] c000000000125758 cpuhp_invoke_callback+0x198/0x5d0 [c000000ff38ffd00] c00000000012782c cpuhp_thread_fun+0x8c/0x3d0 [c000000ff38ffd60] c0000000001678d0 smpboot_thread_fn+0x290/0x2a0 [c000000ff38ffdc0] c00000000015ee78 kthread+0x168/0x1b0 [c000000ff38ffe30] c00000000000b368 ret_from_kernel_thread+0x5c/0x74 While registering the cpuhoplug callbacks for core-imc, if we fails in the cpuhotplug online path for any random core (either because opal call to initialize the core-imc counters fails or because memory allocation fails for that core), ppc_core_imc_cpu_offline() will get invoked for other cpus who successfully returned from cpuhotplug online path. But in the ppc_core_imc_cpu_offline() path we are trying to migrate the event context, when core-imc counters are not even initialized. Thus creating the above stack dump. Add a check to see if core-imc counters are enabled or not in the cpuhotplug offline path before migrating the context to handle this failing scenario. Fixes: 885dcd70 ("powerpc/perf: Add nest IMC PMU support") Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Linus Torvalds authored
For some odd historical reason, we preprocessed the linker scripts with "-C", which keeps comments around. That makes no sense, since the comments are not meaningful for the build anyway. And it actually breaks things, since linker scripts can't have C++ style "//" comments in them, so keeping comments after preprocessing now limits us in odd and surprising ways in our header files for no good reason. The -C option goes back to pre-git and pre-bitkeeper times, but seems to have been historically used (along with "-traditional") for some odd-ball architectures (ia64, MIPS and SH). It probably didn't matter back then either, but might possibly have been used to minimize the difference between the original file and the pre-processed result. The reason for this may be lost in time, but let's not perpetuate it only because we can't remember why we did this crazy thing. This was triggered by the recent addition of SPDX lines to the source tree, where people apparently were confused about why header files couldn't use the C++ comment format. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This reverts commit 51204e06. There wasn't really any good reason for it, and people are complaining (rightly) that it broke existing practice. Cc: Len Brown <len.brown@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "Check addr_limit in arm64 __dump_instr()" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: ensure __dump_instr() checks addr_limit
-
Mark Rutland authored
It's possible for a user to deliberately trigger __dump_instr with a chosen kernel address. Let's avoid problems resulting from this by using get_user() rather than __get_user(), ensuring that we don't erroneously access kernel memory. Where we use __dump_instr() on kernel text, we already switch to KERNEL_DS, so this shouldn't adversely affect those cases. Fixes: 60ffc30d ("arm64: Exception handling") Cc: stable@vger.kernel.org Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Linus Torvalds authored
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by:
Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by:
Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "This consists of a single fix to a regression to printing individual test results to the console. An earlier commit changed it to printing just the summary of results, which will negatively impact users that rely on console log to look at the individual test failures. This fix makes it optional to print summary and by default results get printed to the console" * tag 'linux-kselftest-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: lib.mk: print individual test results to console by default
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Unfortunately we still have received a significant amount of changes at the late stage, but at least all are small and clear fixes. There are two fixes for ALSA core stuff, yet another timer race fix and sequencer lockdep annotation fix. Both are spotted by syzkaller, and not too serious but better to paper over quickly. All other commits are about ASoC drivers, most notably, a revert of RT5514 hotword control that was included in 4.14-rc (due to a kind of abuse of kctl TLV ABI), together with topology API fixes and other device-specific small fixes that should go for stable, too" * tag 'sound-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Fix nested rwsem annotation for lockdep splat ALSA: timer: Add missing mutex lock for compat ioctls ASoC: rt5616: fix 0x91 default value ASoC: rt5659: connect LOUT Amp with Charge Pump ASoC: rt5659: register power bit of LOUT Amp ASoC: rt5663: Change the dev getting function in rt5663_irq ASoC: rt5514: Revert Hotword Model control ASoC: topology: Fix a potential memory leak in 'soc_tplg_dapm_widget_denum_create()' ASoC: topology: Fix a potential NULL pointer dereference in 'soc_tplg_dapm_widget_denum_create()' ASoC: rt5514-spi: check irq status to schedule data copy ASoC: adau17x1: Workaround for noise bug in ADC
-
Linus Torvalds authored
Merge branch 'fixes-v4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull key handling fixes from James Morris: "Fixes for the Keys subsystem by Eric Biggers" * 'fixes-v4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: fix out-of-bounds read during ASN.1 parsing KEYS: trusted: fix writing past end of buffer in trusted_read() KEYS: return full count in keyring_read() if buffer is too small
-
Jiri Slaby authored
In commit 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour"), I let FUTEX_WAKE_OP to fail on invalid op. Namely when op should be considered as shift and the shift is out of range (< 0 or > 31). But strace's test suite does this madness: futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee); futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xbadfaced); futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xffffffff); When I pick the first 0xa0caffee, it decodes as: 0x80000000 & 0xa0caffee: oparg is shift 0x70000000 & 0xa0caffee: op is FUTEX_OP_OR 0x0f000000 & 0xa0caffee: cmp is FUTEX_OP_CMP_EQ 0x00fff000 & 0xa0caffee: oparg is sign-extended 0xcaf = -849 0x00000fff & 0xa0caffee: cmparg is sign-extended 0xfee = -18 That means the op tries to do this: (futex |= (1 << (-849))) == -18 which is completely bogus. The new check of op in the code is: if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) { if (oparg < 0 || oparg > 31) return -EINVAL; oparg = 1 << oparg; } which results obviously in the "Invalid argument" errno: FAIL: futex =========== futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee) = -1: Invalid argument futex.test: failed test: ../futex failed with code 1 So let us soften the failure to print only a (ratelimited) message, crop the value and continue as if it were right. When userspace keeps up, we can switch this to return -EINVAL again. [v2] Do not return 0 immediatelly, proceed with the cropped value. Fixes: 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Kroah-Hartman authored
Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by:
Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by:
Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by:
Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by:
Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by:
Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by:
Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
syzkaller with KASAN reported an out-of-bounds read in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_X509_CERTIFICATE_PARSER=y and CONFIG_KASAN=y: keyctl add asymmetric desc $'\x30\x30' @s The bug is that the length of an ASN.1 data value isn't validated in the case where it is encoded using the short form, causing the decoder to read past the end of the input buffer. Fix it by validating the length. The bug report was: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233 Read of size 1 at addr ffff88003cccfa02 by task syz-executor0/6818 CPU: 1 PID: 6818 Comm: syz-executor0 Not tainted 4.14.0-rc7-00008-g5f479447 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0xb3/0x10b lib/dump_stack.c:52 print_address_description+0x79/0x2a0 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x236/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233 x509_cert_parse+0x1db/0x650 crypto/asymmetric_keys/x509_cert_parser.c:89 x509_key_preparse+0x64/0x7a0 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xcb/0x1a0 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x347/0xb20 security/keys/key.c:855 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0x1cd/0x340 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x447c89 RSP: 002b:00007fca7a5d3bd8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 00007fca7a5d46cc RCX: 0000000000447c89 RDX: 0000000020006f4a RSI: 0000000020006000 RDI: 0000000020001ff5 RBP: 0000000000000046 R08: fffffffffffffffd R09: 0000000000000000 R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fca7a5d49c0 R15: 00007fca7a5d4700 Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.l.morris@oracle.com>
-
Eric Biggers authored
When calling keyctl_read() on a key of type "trusted", if the user-supplied buffer was too small, the kernel ignored the buffer length and just wrote past the end of the buffer, potentially corrupting userspace memory. Fix it by instead returning the size required, as per the documentation for keyctl_read(). We also don't even fill the buffer at all in this case, as this is slightly easier to implement than doing a short read, and either behavior appears to be permitted. It also makes it match the behavior of the "encrypted" key type. Fixes: d00a1c72 ("keys: add new trusted key-type") Reported-by:
Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v2.6.38+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
James Morris <james.l.morris@oracle.com>
-
Eric Biggers authored
Commit e645016a ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") made keyring_read() stop corrupting userspace memory when the user-supplied buffer is too small. However it also made the return value in that case be the short buffer size rather than the size required, yet keyctl_read() is actually documented to return the size required. Therefore, switch it over to the documented behavior. Note that for now we continue to have it fill the short buffer, since it did that before (pre-v3.13) and dump_key_tree_aux() in keyutils arguably relies on it. Fixes: e645016a ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") Reported-by:
Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
James Morris <james.l.morris@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two one-liner fixes for your net tree, they are: 1) Disable fast hash operations for 2-bytes length keys which is leading to incorrect lookups in nf_tables, from Anatole Denis. 2) Reload pointer ipv4 header after ip_route_me_harder() given this may result in use-after-free due to skbuff header reallocation, patch from Tejaswi Tanikella. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeff Barnhill authored
FRA_L3MDEV is defined as U8, but is being added as a U32 attribute. On big endian architecture, this results in the l3mdev entry not being added to the FIB rules. Fixes: 1aa6c4f6 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by:
Jeff Barnhill <0xeffeff@gmail.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-